b881408ed7
never clear about whether the end of the range was inclusive
or exclusive. Make it inclusive, but also provide a RangeSize()
function that will generate a Range based on a start and a size.
This, in combination with using the comparison operators, makes
almost all usages of the range not care how it is stored.
base/range.cc:
Make the end of the range inclusive.
start/end -> first/last
(end seems too much like end() in stl)
base/range.hh:
Make the end of the range inclusive.
Fix all comparison operators so that they work correctly with
an inclusive range. Also, when comparing one range to another
with <, <=, >, >=, we only look at the beginning of the range
beacuse x <= y should be the same as x < y || x == y. (This wasn't
the case before.)
Add a few functions for making a range:
RangeSize is start and size
RangeEx is start and end where end is exclusive
RangeIn is start and end where end is inclusive
start/end -> first/last
(end seems too much like end() in stl)
dev/alpha_console.cc:
dev/baddev.cc:
dev/ide_ctrl.cc:
dev/ns_gige.cc:
dev/pciconfigall.cc:
dev/pcidev.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
Use the RangeSize function to create a range.
--HG--
extra : convert_revision : 29a7eb7fce745680f1c77fefff456c2144bc3994
731 lines
22 KiB
C++
731 lines
22 KiB
C++
/*
|
|
* Copyright (c) 2004 The Regents of The University of Michigan
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer;
|
|
* redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution;
|
|
* neither the name of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <cstddef>
|
|
#include <cstdlib>
|
|
#include <string>
|
|
#include <vector>
|
|
|
|
#include "base/trace.hh"
|
|
#include "cpu/intr_control.hh"
|
|
#include "dev/dma.hh"
|
|
#include "dev/pcireg.h"
|
|
#include "dev/pciconfigall.hh"
|
|
#include "dev/ide_disk.hh"
|
|
#include "dev/ide_ctrl.hh"
|
|
#include "dev/tsunami_cchip.hh"
|
|
#include "mem/bus/bus.hh"
|
|
#include "mem/bus/pio_interface.hh"
|
|
#include "mem/bus/pio_interface_impl.hh"
|
|
#include "mem/bus/dma_interface.hh"
|
|
#include "dev/tsunami.hh"
|
|
#include "mem/functional_mem/memory_control.hh"
|
|
#include "mem/functional_mem/physical_memory.hh"
|
|
#include "sim/builder.hh"
|
|
#include "sim/sim_object.hh"
|
|
|
|
using namespace std;
|
|
|
|
////
|
|
// Initialization and destruction
|
|
////
|
|
|
|
IdeController::IdeController(const string &name, IntrControl *ic,
|
|
const vector<IdeDisk *> &new_disks,
|
|
MemoryController *mmu, PciConfigAll *cf,
|
|
PciConfigData *cd, Tsunami *t, uint32_t bus_num,
|
|
uint32_t dev_num, uint32_t func_num,
|
|
Bus *host_bus, Tick pio_latency, HierParams *hier)
|
|
: PciDev(name, mmu, cf, cd, bus_num, dev_num, func_num), tsunami(t)
|
|
{
|
|
// put back pointer into Tsunami
|
|
tsunami->disk_controller = this;
|
|
|
|
// initialize the PIO interface addresses
|
|
pri_cmd_addr = 0;
|
|
pri_cmd_size = BARSize[0];
|
|
|
|
pri_ctrl_addr = 0;
|
|
pri_ctrl_size = BARSize[1];
|
|
|
|
sec_cmd_addr = 0;
|
|
sec_cmd_size = BARSize[2];
|
|
|
|
sec_ctrl_addr = 0;
|
|
sec_ctrl_size = BARSize[3];
|
|
|
|
// initialize the bus master interface (BMI) address to be configured
|
|
// via PCI
|
|
bmi_addr = 0;
|
|
bmi_size = BARSize[4];
|
|
|
|
// zero out all of the registers
|
|
memset(bmi_regs, 0, sizeof(bmi_regs));
|
|
memset(pci_regs, 0, sizeof(pci_regs));
|
|
|
|
// setup initial values
|
|
*(uint32_t *)&pci_regs[IDETIM] = 0x80008000; // enable both channels
|
|
*(uint8_t *)&bmi_regs[BMIS0] = 0x60;
|
|
*(uint8_t *)&bmi_regs[BMIS1] = 0x60;
|
|
|
|
// reset all internal variables
|
|
io_enabled = false;
|
|
bm_enabled = false;
|
|
memset(cmd_in_progress, 0, sizeof(cmd_in_progress));
|
|
|
|
// create the PIO and DMA interfaces
|
|
if (host_bus) {
|
|
pioInterface = newPioInterface(name, hier, host_bus, this,
|
|
&IdeController::cacheAccess);
|
|
|
|
dmaInterface = new DMAInterface<Bus>(name + ".dma", host_bus,
|
|
host_bus, 1);
|
|
pioLatency = pio_latency * host_bus->clockRatio;
|
|
}
|
|
|
|
// setup the disks attached to controller
|
|
memset(disks, 0, sizeof(IdeDisk *) * 4);
|
|
|
|
if (new_disks.size() > 3)
|
|
panic("IDE controllers support a maximum of 4 devices attached!\n");
|
|
|
|
for (int i = 0; i < new_disks.size(); i++) {
|
|
disks[i] = new_disks[i];
|
|
disks[i]->setController(this, dmaInterface);
|
|
}
|
|
}
|
|
|
|
IdeController::~IdeController()
|
|
{
|
|
for (int i = 0; i < 4; i++)
|
|
if (disks[i])
|
|
delete disks[i];
|
|
}
|
|
|
|
////
|
|
// Utility functions
|
|
///
|
|
|
|
void
|
|
IdeController::parseAddr(const Addr &addr, Addr &offset, bool &primary,
|
|
RegType_t &type)
|
|
{
|
|
offset = addr;
|
|
|
|
if (addr >= pri_cmd_addr && addr < (pri_cmd_addr + pri_cmd_size)) {
|
|
offset -= pri_cmd_addr;
|
|
type = COMMAND_BLOCK;
|
|
primary = true;
|
|
} else if (addr >= pri_ctrl_addr &&
|
|
addr < (pri_ctrl_addr + pri_ctrl_size)) {
|
|
offset -= pri_ctrl_addr;
|
|
type = CONTROL_BLOCK;
|
|
primary = true;
|
|
} else if (addr >= sec_cmd_addr &&
|
|
addr < (sec_cmd_addr + sec_cmd_size)) {
|
|
offset -= sec_cmd_addr;
|
|
type = COMMAND_BLOCK;
|
|
primary = false;
|
|
} else if (addr >= sec_ctrl_addr &&
|
|
addr < (sec_ctrl_addr + sec_ctrl_size)) {
|
|
offset -= sec_ctrl_addr;
|
|
type = CONTROL_BLOCK;
|
|
primary = false;
|
|
} else if (addr >= bmi_addr && addr < (bmi_addr + bmi_size)) {
|
|
offset -= bmi_addr;
|
|
type = BMI_BLOCK;
|
|
primary = (offset < BMIC1) ? true : false;
|
|
} else {
|
|
panic("IDE controller access to invalid address: %#x\n", addr);
|
|
}
|
|
}
|
|
|
|
int
|
|
IdeController::getDisk(bool primary)
|
|
{
|
|
int disk = 0;
|
|
uint8_t *devBit = &dev[0];
|
|
|
|
if (!primary) {
|
|
disk += 2;
|
|
devBit = &dev[1];
|
|
}
|
|
|
|
disk += *devBit;
|
|
|
|
assert(*devBit == 0 || *devBit == 1);
|
|
|
|
return disk;
|
|
}
|
|
|
|
int
|
|
IdeController::getDisk(IdeDisk *diskPtr)
|
|
{
|
|
for (int i = 0; i < 4; i++) {
|
|
if ((long)diskPtr == (long)disks[i])
|
|
return i;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
bool
|
|
IdeController::isDiskSelected(IdeDisk *diskPtr)
|
|
{
|
|
for (int i = 0; i < 4; i++) {
|
|
if ((long)diskPtr == (long)disks[i]) {
|
|
// is disk is on primary or secondary channel
|
|
int channel = i/2;
|
|
// is disk the master or slave
|
|
int devID = i%2;
|
|
|
|
return (dev[channel] == devID);
|
|
}
|
|
}
|
|
panic("Unable to find disk by pointer!!\n");
|
|
}
|
|
|
|
////
|
|
// Command completion
|
|
////
|
|
|
|
void
|
|
IdeController::setDmaComplete(IdeDisk *disk)
|
|
{
|
|
int diskNum = getDisk(disk);
|
|
|
|
if (diskNum < 0)
|
|
panic("Unable to find disk based on pointer %#x\n", disk);
|
|
|
|
if (diskNum < 2) {
|
|
// clear the start/stop bit in the command register
|
|
bmi_regs[BMIC0] &= ~SSBM;
|
|
// clear the bus master active bit in the status register
|
|
bmi_regs[BMIS0] &= ~BMIDEA;
|
|
// set the interrupt bit
|
|
bmi_regs[BMIS0] |= IDEINTS;
|
|
} else {
|
|
// clear the start/stop bit in the command register
|
|
bmi_regs[BMIC1] &= ~SSBM;
|
|
// clear the bus master active bit in the status register
|
|
bmi_regs[BMIS1] &= ~BMIDEA;
|
|
// set the interrupt bit
|
|
bmi_regs[BMIS1] |= IDEINTS;
|
|
}
|
|
}
|
|
|
|
////
|
|
// Interrupt handling
|
|
////
|
|
|
|
void
|
|
IdeController::intrPost()
|
|
{
|
|
tsunami->cchip->postDRIR(configData->config.hdr.pci0.interruptLine);
|
|
}
|
|
|
|
void
|
|
IdeController::intrClear()
|
|
{
|
|
tsunami->cchip->clearDRIR(configData->config.hdr.pci0.interruptLine);
|
|
}
|
|
|
|
////
|
|
// Bus timing and bus access functions
|
|
////
|
|
|
|
Tick
|
|
IdeController::cacheAccess(MemReqPtr &req)
|
|
{
|
|
// @todo Add more accurate timing to cache access
|
|
return curTick + pioLatency;
|
|
}
|
|
|
|
////
|
|
// Read and write handling
|
|
////
|
|
|
|
void
|
|
IdeController::ReadConfig(int offset, int size, uint8_t *data)
|
|
{
|
|
|
|
#if TRACING_ON
|
|
Addr origOffset = offset;
|
|
#endif
|
|
|
|
if (offset < PCI_DEVICE_SPECIFIC) {
|
|
PciDev::ReadConfig(offset, size, data);
|
|
} else {
|
|
if (offset >= PCI_IDE_TIMING && offset < (PCI_IDE_TIMING + 4)) {
|
|
offset -= PCI_IDE_TIMING;
|
|
offset += IDETIM;
|
|
|
|
if ((offset + size) > (IDETIM + 4))
|
|
panic("PCI read of IDETIM with invalid size\n");
|
|
} else if (offset == PCI_SLAVE_TIMING) {
|
|
offset -= PCI_SLAVE_TIMING;
|
|
offset += SIDETIM;
|
|
|
|
if ((offset + size) > (SIDETIM + 1))
|
|
panic("PCI read of SIDETIM with invalid size\n");
|
|
} else if (offset == PCI_UDMA33_CTRL) {
|
|
offset -= PCI_UDMA33_CTRL;
|
|
offset += UDMACTL;
|
|
|
|
if ((offset + size) > (UDMACTL + 1))
|
|
panic("PCI read of UDMACTL with invalid size\n");
|
|
} else if (offset >= PCI_UDMA33_TIMING &&
|
|
offset < (PCI_UDMA33_TIMING + 2)) {
|
|
offset -= PCI_UDMA33_TIMING;
|
|
offset += UDMATIM;
|
|
|
|
if ((offset + size) > (UDMATIM + 2))
|
|
panic("PCI read of UDMATIM with invalid size\n");
|
|
} else {
|
|
panic("PCI read of unimplemented register: %x\n", offset);
|
|
}
|
|
|
|
memcpy((void *)data, (void *)&pci_regs[offset], size);
|
|
}
|
|
|
|
DPRINTF(IdeCtrl, "IDE PCI read offset: %#x (%#x) size: %#x data: %#x\n",
|
|
origOffset, offset, size, *(uint32_t *)data);
|
|
}
|
|
|
|
void
|
|
IdeController::WriteConfig(int offset, int size, uint32_t data)
|
|
{
|
|
DPRINTF(IdeCtrl, "IDE PCI write offset: %#x size: %#x data: %#x\n",
|
|
offset, size, data);
|
|
|
|
// do standard write stuff if in standard PCI space
|
|
if (offset < PCI_DEVICE_SPECIFIC) {
|
|
PciDev::WriteConfig(offset, size, data);
|
|
} else {
|
|
if (offset >= PCI_IDE_TIMING && offset < (PCI_IDE_TIMING + 4)) {
|
|
offset -= PCI_IDE_TIMING;
|
|
offset += IDETIM;
|
|
|
|
if ((offset + size) > (IDETIM + 4))
|
|
panic("PCI write to IDETIM with invalid size\n");
|
|
} else if (offset == PCI_SLAVE_TIMING) {
|
|
offset -= PCI_SLAVE_TIMING;
|
|
offset += SIDETIM;
|
|
|
|
if ((offset + size) > (SIDETIM + 1))
|
|
panic("PCI write to SIDETIM with invalid size\n");
|
|
} else if (offset == PCI_UDMA33_CTRL) {
|
|
offset -= PCI_UDMA33_CTRL;
|
|
offset += UDMACTL;
|
|
|
|
if ((offset + size) > (UDMACTL + 1))
|
|
panic("PCI write to UDMACTL with invalid size\n");
|
|
} else if (offset >= PCI_UDMA33_TIMING &&
|
|
offset < (PCI_UDMA33_TIMING + 2)) {
|
|
offset -= PCI_UDMA33_TIMING;
|
|
offset += UDMATIM;
|
|
|
|
if ((offset + size) > (UDMATIM + 2))
|
|
panic("PCI write to UDMATIM with invalid size\n");
|
|
} else {
|
|
panic("PCI write to unimplemented register: %x\n", offset);
|
|
}
|
|
|
|
memcpy((void *)&pci_regs[offset], (void *)&data, size);
|
|
}
|
|
|
|
// Catch the writes to specific PCI registers that have side affects
|
|
// (like updating the PIO ranges)
|
|
switch (offset) {
|
|
case PCI_COMMAND:
|
|
if (config.data[offset] & PCI_CMD_IOSE)
|
|
io_enabled = true;
|
|
else
|
|
io_enabled = false;
|
|
|
|
if (config.data[offset] & PCI_CMD_BME)
|
|
bm_enabled = true;
|
|
else
|
|
bm_enabled = false;
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR0:
|
|
if (BARAddrs[0] != 0) {
|
|
pri_cmd_addr = BARAddrs[0];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(RangeSize(pri_cmd_addr,
|
|
pri_cmd_size));
|
|
|
|
pri_cmd_addr &= PA_UNCACHED_MASK;
|
|
}
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR1:
|
|
if (BARAddrs[1] != 0) {
|
|
pri_ctrl_addr = BARAddrs[1];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(RangeSize(pri_ctrl_addr,
|
|
pri_ctrl_size));
|
|
|
|
pri_ctrl_addr &= PA_UNCACHED_MASK;
|
|
}
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR2:
|
|
if (BARAddrs[2] != 0) {
|
|
sec_cmd_addr = BARAddrs[2];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(RangeSize(sec_cmd_addr,
|
|
sec_cmd_size));
|
|
|
|
sec_cmd_addr &= PA_UNCACHED_MASK;
|
|
}
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR3:
|
|
if (BARAddrs[3] != 0) {
|
|
sec_ctrl_addr = BARAddrs[3];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(RangeSize(sec_ctrl_addr,
|
|
sec_ctrl_size));
|
|
|
|
sec_ctrl_addr &= PA_UNCACHED_MASK;
|
|
}
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR4:
|
|
if (BARAddrs[4] != 0) {
|
|
bmi_addr = BARAddrs[4];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(RangeSize(bmi_addr, bmi_size));
|
|
|
|
bmi_addr &= PA_UNCACHED_MASK;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
Fault
|
|
IdeController::read(MemReqPtr &req, uint8_t *data)
|
|
{
|
|
Addr offset;
|
|
bool primary;
|
|
bool byte;
|
|
bool cmdBlk;
|
|
RegType_t type;
|
|
int disk;
|
|
|
|
parseAddr(req->paddr, offset, primary, type);
|
|
byte = (req->size == sizeof(uint8_t)) ? true : false;
|
|
cmdBlk = (type == COMMAND_BLOCK) ? true : false;
|
|
|
|
if (!io_enabled)
|
|
return No_Fault;
|
|
|
|
// sanity check the size (allows byte, word, or dword access)
|
|
if (req->size != sizeof(uint8_t) && req->size != sizeof(uint16_t) &&
|
|
req->size != sizeof(uint32_t))
|
|
panic("IDE controller read of invalid size: %#x\n", req->size);
|
|
|
|
if (type != BMI_BLOCK) {
|
|
assert(req->size != sizeof(uint32_t));
|
|
|
|
disk = getDisk(primary);
|
|
if (disks[disk])
|
|
disks[disk]->read(offset, byte, cmdBlk, data);
|
|
} else {
|
|
memcpy((void *)data, &bmi_regs[offset], req->size);
|
|
}
|
|
|
|
DPRINTF(IdeCtrl, "IDE read from offset: %#x size: %#x data: %#x\n",
|
|
offset, req->size, *(uint32_t *)data);
|
|
|
|
return No_Fault;
|
|
}
|
|
|
|
Fault
|
|
IdeController::write(MemReqPtr &req, const uint8_t *data)
|
|
{
|
|
Addr offset;
|
|
bool primary;
|
|
bool byte;
|
|
bool cmdBlk;
|
|
RegType_t type;
|
|
int disk;
|
|
|
|
parseAddr(req->paddr, offset, primary, type);
|
|
byte = (req->size == sizeof(uint8_t)) ? true : false;
|
|
cmdBlk = (type == COMMAND_BLOCK) ? true : false;
|
|
|
|
DPRINTF(IdeCtrl, "IDE write from offset: %#x size: %#x data: %#x\n",
|
|
offset, req->size, *(uint32_t *)data);
|
|
|
|
uint8_t oldVal, newVal;
|
|
|
|
if (!io_enabled)
|
|
return No_Fault;
|
|
|
|
if (type == BMI_BLOCK && !bm_enabled)
|
|
return No_Fault;
|
|
|
|
if (type != BMI_BLOCK) {
|
|
// shadow the dev bit
|
|
if (type == COMMAND_BLOCK && offset == IDE_SELECT_OFFSET) {
|
|
uint8_t *devBit = (primary ? &dev[0] : &dev[1]);
|
|
*devBit = ((*data & IDE_SELECT_DEV_BIT) ? 1 : 0);
|
|
}
|
|
|
|
assert(req->size != sizeof(uint32_t));
|
|
|
|
disk = getDisk(primary);
|
|
if (disks[disk])
|
|
disks[disk]->write(offset, byte, cmdBlk, data);
|
|
} else {
|
|
switch (offset) {
|
|
// Bus master IDE command register
|
|
case BMIC1:
|
|
case BMIC0:
|
|
if (req->size != sizeof(uint8_t))
|
|
panic("Invalid BMIC write size: %x\n", req->size);
|
|
|
|
// select the current disk based on DEV bit
|
|
disk = getDisk(primary);
|
|
|
|
oldVal = bmi_regs[offset];
|
|
newVal = *data;
|
|
|
|
// if a DMA transfer is in progress, R/W control cannot change
|
|
if (oldVal & SSBM) {
|
|
if ((oldVal & RWCON) ^ (newVal & RWCON)) {
|
|
(oldVal & RWCON) ? newVal |= RWCON : newVal &= ~RWCON;
|
|
}
|
|
}
|
|
|
|
// see if the start/stop bit is being changed
|
|
if ((oldVal & SSBM) ^ (newVal & SSBM)) {
|
|
if (oldVal & SSBM) {
|
|
// stopping DMA transfer
|
|
DPRINTF(IdeCtrl, "Stopping DMA transfer\n");
|
|
|
|
// clear the BMIDEA bit
|
|
bmi_regs[offset + 0x2] &= ~BMIDEA;
|
|
|
|
if (disks[disk] == NULL)
|
|
panic("DMA stop for disk %d which does not exist\n",
|
|
disk);
|
|
|
|
// inform the disk of the DMA transfer abort
|
|
disks[disk]->abortDma();
|
|
} else {
|
|
// starting DMA transfer
|
|
DPRINTF(IdeCtrl, "Starting DMA transfer\n");
|
|
|
|
// set the BMIDEA bit
|
|
bmi_regs[offset + 0x2] |= BMIDEA;
|
|
|
|
if (disks[disk] == NULL)
|
|
panic("DMA start for disk %d which does not exist\n",
|
|
disk);
|
|
|
|
// inform the disk of the DMA transfer start
|
|
if (primary)
|
|
disks[disk]->startDma(*(uint32_t *)&bmi_regs[BMIDTP0]);
|
|
else
|
|
disks[disk]->startDma(*(uint32_t *)&bmi_regs[BMIDTP1]);
|
|
}
|
|
}
|
|
|
|
// update the register value
|
|
bmi_regs[offset] = newVal;
|
|
break;
|
|
|
|
// Bus master IDE status register
|
|
case BMIS0:
|
|
case BMIS1:
|
|
if (req->size != sizeof(uint8_t))
|
|
panic("Invalid BMIS write size: %x\n", req->size);
|
|
|
|
oldVal = bmi_regs[offset];
|
|
newVal = *data;
|
|
|
|
// the BMIDEA bit is RO
|
|
newVal |= (oldVal & BMIDEA);
|
|
|
|
// to reset (set 0) IDEINTS and IDEDMAE, write 1 to each
|
|
if ((oldVal & IDEINTS) && (newVal & IDEINTS))
|
|
newVal &= ~IDEINTS; // clear the interrupt?
|
|
else
|
|
(oldVal & IDEINTS) ? newVal |= IDEINTS : newVal &= ~IDEINTS;
|
|
|
|
if ((oldVal & IDEDMAE) && (newVal & IDEDMAE))
|
|
newVal &= ~IDEDMAE;
|
|
else
|
|
(oldVal & IDEDMAE) ? newVal |= IDEDMAE : newVal &= ~IDEDMAE;
|
|
|
|
bmi_regs[offset] = newVal;
|
|
break;
|
|
|
|
// Bus master IDE descriptor table pointer register
|
|
case BMIDTP0:
|
|
case BMIDTP1:
|
|
if (req->size != sizeof(uint32_t))
|
|
panic("Invalid BMIDTP write size: %x\n", req->size);
|
|
|
|
*(uint32_t *)&bmi_regs[offset] = *(uint32_t *)data & ~0x3;
|
|
break;
|
|
|
|
default:
|
|
if (req->size != sizeof(uint8_t) &&
|
|
req->size != sizeof(uint16_t) &&
|
|
req->size != sizeof(uint32_t))
|
|
panic("IDE controller write of invalid write size: %x\n",
|
|
req->size);
|
|
|
|
// do a default copy of data into the registers
|
|
memcpy((void *)&bmi_regs[offset], data, req->size);
|
|
}
|
|
}
|
|
|
|
return No_Fault;
|
|
}
|
|
|
|
////
|
|
// Serialization
|
|
////
|
|
|
|
void
|
|
IdeController::serialize(std::ostream &os)
|
|
{
|
|
// Serialize the PciDev base class
|
|
PciDev::serialize(os);
|
|
|
|
// Serialize register addresses and sizes
|
|
SERIALIZE_SCALAR(pri_cmd_addr);
|
|
SERIALIZE_SCALAR(pri_cmd_size);
|
|
SERIALIZE_SCALAR(pri_ctrl_addr);
|
|
SERIALIZE_SCALAR(pri_ctrl_size);
|
|
SERIALIZE_SCALAR(sec_cmd_addr);
|
|
SERIALIZE_SCALAR(sec_cmd_size);
|
|
SERIALIZE_SCALAR(sec_ctrl_addr);
|
|
SERIALIZE_SCALAR(sec_ctrl_size);
|
|
SERIALIZE_SCALAR(bmi_addr);
|
|
SERIALIZE_SCALAR(bmi_size);
|
|
|
|
// Serialize registers
|
|
SERIALIZE_ARRAY(bmi_regs, 16);
|
|
SERIALIZE_ARRAY(dev, 2);
|
|
SERIALIZE_ARRAY(pci_regs, 8);
|
|
|
|
// Serialize internal state
|
|
SERIALIZE_SCALAR(io_enabled);
|
|
SERIALIZE_SCALAR(bm_enabled);
|
|
SERIALIZE_ARRAY(cmd_in_progress, 4);
|
|
}
|
|
|
|
void
|
|
IdeController::unserialize(Checkpoint *cp, const std::string §ion)
|
|
{
|
|
// Unserialize the PciDev base class
|
|
PciDev::unserialize(cp, section);
|
|
|
|
// Unserialize register addresses and sizes
|
|
UNSERIALIZE_SCALAR(pri_cmd_addr);
|
|
UNSERIALIZE_SCALAR(pri_cmd_size);
|
|
UNSERIALIZE_SCALAR(pri_ctrl_addr);
|
|
UNSERIALIZE_SCALAR(pri_ctrl_size);
|
|
UNSERIALIZE_SCALAR(sec_cmd_addr);
|
|
UNSERIALIZE_SCALAR(sec_cmd_size);
|
|
UNSERIALIZE_SCALAR(sec_ctrl_addr);
|
|
UNSERIALIZE_SCALAR(sec_ctrl_size);
|
|
UNSERIALIZE_SCALAR(bmi_addr);
|
|
UNSERIALIZE_SCALAR(bmi_size);
|
|
|
|
// Unserialize registers
|
|
UNSERIALIZE_ARRAY(bmi_regs, 16);
|
|
UNSERIALIZE_ARRAY(dev, 2);
|
|
UNSERIALIZE_ARRAY(pci_regs, 8);
|
|
|
|
// Unserialize internal state
|
|
UNSERIALIZE_SCALAR(io_enabled);
|
|
UNSERIALIZE_SCALAR(bm_enabled);
|
|
UNSERIALIZE_ARRAY(cmd_in_progress, 4);
|
|
|
|
if (pioInterface) {
|
|
pioInterface->addAddrRange(RangeSize(pri_cmd_addr, pri_cmd_size));
|
|
pioInterface->addAddrRange(RangeSize(pri_ctrl_addr, pri_ctrl_size));
|
|
pioInterface->addAddrRange(RangeSize(sec_cmd_addr, sec_cmd_size));
|
|
pioInterface->addAddrRange(RangeSize(sec_ctrl_addr, sec_ctrl_size));
|
|
pioInterface->addAddrRange(RangeSize(bmi_addr, bmi_size));
|
|
}
|
|
}
|
|
|
|
#ifndef DOXYGEN_SHOULD_SKIP_THIS
|
|
|
|
BEGIN_DECLARE_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
SimObjectParam<IntrControl *> intr_ctrl;
|
|
SimObjectVectorParam<IdeDisk *> disks;
|
|
SimObjectParam<MemoryController *> mmu;
|
|
SimObjectParam<PciConfigAll *> configspace;
|
|
SimObjectParam<PciConfigData *> configdata;
|
|
SimObjectParam<Tsunami *> tsunami;
|
|
Param<uint32_t> pci_bus;
|
|
Param<uint32_t> pci_dev;
|
|
Param<uint32_t> pci_func;
|
|
SimObjectParam<Bus *> io_bus;
|
|
Param<Tick> pio_latency;
|
|
SimObjectParam<HierParams *> hier;
|
|
|
|
END_DECLARE_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
BEGIN_INIT_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
INIT_PARAM(intr_ctrl, "Interrupt Controller"),
|
|
INIT_PARAM(disks, "IDE disks attached to this controller"),
|
|
INIT_PARAM(mmu, "Memory controller"),
|
|
INIT_PARAM(configspace, "PCI Configspace"),
|
|
INIT_PARAM(configdata, "PCI Config data"),
|
|
INIT_PARAM(tsunami, "Tsunami chipset pointer"),
|
|
INIT_PARAM(pci_bus, "PCI bus ID"),
|
|
INIT_PARAM(pci_dev, "PCI device number"),
|
|
INIT_PARAM(pci_func, "PCI function code"),
|
|
INIT_PARAM_DFLT(io_bus, "Host bus to attach to", NULL),
|
|
INIT_PARAM_DFLT(pio_latency, "Programmed IO latency in bus cycles", 1),
|
|
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)
|
|
|
|
END_INIT_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
CREATE_SIM_OBJECT(IdeController)
|
|
{
|
|
return new IdeController(getInstanceName(), intr_ctrl, disks, mmu,
|
|
configspace, configdata, tsunami, pci_bus,
|
|
pci_dev, pci_func, io_bus, pio_latency, hier);
|
|
}
|
|
|
|
REGISTER_SIM_OBJECT("IdeController", IdeController)
|
|
|
|
#endif //DOXYGEN_SHOULD_SKIP_THIS
|