gem5/ext/sst/ExtMaster.cc
Curtis Dunham b4282af318 ext: fix SST connector
Should work with SST 5.1 and trunk as of right now.
2016-02-04 16:57:59 -06:00

240 lines
7.2 KiB
C++

// Copyright (c) 2015 ARM Limited
// All rights reserved.
//
// The license below extends only to copyright in the software and shall
// not be construed as granting a license to any other intellectual
// property including but not limited to intellectual property relating
// to a hardware implementation of the functionality of the software
// licensed hereunder. You may use the software subject to the license
// terms below provided that you ensure that this notice is replicated
// unmodified and in its entirety in all distributions of the software,
// modified or unmodified, in source code or in binary form.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met: redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer;
// redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution;
// neither the name of the copyright holders nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// Copyright 2009-2014 Sandia Coporation. Under the terms
// of Contract DE-AC04-94AL85000 with Sandia Corporation, the U.S.
// Government retains certain rights in this software.
//
// Copyright (c) 2009-2014, Sandia Corporation
// All rights reserved.
//
// For license information, see the LICENSE file in the current directory.
#include "gem5.hh"
#ifdef fatal // gem5 sets this
#undef fatal
#endif
#include <sst_config.h>
#include <mem/packet.hh>
#include <sst/core/component.h>
#include <sst/core/params.h>
#include <sst/core/link.h>
#include <sst/elements/memHierarchy/memNIC.h>
using namespace SST;
using namespace SST::gem5;
using namespace SST::MemHierarchy;
ExtMaster::ExtMaster(gem5Component *g, Output &o, ::ExternalMaster& p,
std::string &n) :
Port(n, p), out(o), port(p), simPhase(CONSTRUCTION),
gem5(g), name(n)
{
Params _p; // will be ignored
nic = dynamic_cast<MemNIC*>(gem5->loadModuleWithComponent("memHierarchy.memNIC", g, _p));
MemNIC::ComponentInfo ci;
ci.num_vcs = 1;
ci.link_port = "network";
ci.link_bandwidth = "16GB/s";
ci.link_inbuf_size = "1KB";
ci.link_outbuf_size = "1KB";
ci.network_addr = 0; // hard coded at the moment
ci.type = MemNIC::TypeDirectoryCtrl;
nic->moduleInit(ci, new Event::Handler<ExtMaster>
(this, &ExtMaster::handleEvent));
}
void
ExtMaster::init(unsigned phase)
{
simPhase = INIT;
if (phase == 0) {
assert(nic);
for (auto range : getAddrRanges()) {
MemNIC::ComponentTypeInfo ti;
ti.rangeStart = range.start();
ti.rangeEnd = range.end();
ti.interleaveSize = 0;
ti.interleaveStep = 0;
nic->addTypeInfo(ti);
ranges.insert(range);
}
}
nic->init(phase);
}
void
ExtMaster::setup(void)
{
nic->setup();
simPhase = RUN;
}
void
ExtMaster::finish(void)
{
nic->finish();
}
void
ExtMaster::clock(void)
{
nic->clock();
}
void
ExtMaster::handleEvent(SST::Event* event)
{
if (simPhase == CONSTRUCTION) {
out.fatal(CALL_INFO, 1, "received Event during Construction phase\n");
}
MemEvent *ev = dynamic_cast<MemEvent*>(event);
if (!ev) {
out.fatal(CALL_INFO, 1, "Can't handle non-MemEvent Event's\n");
}
Command cmdI = ev->getCmd(); // command in - SST
MemCmd::Command cmdO; // command out - gem5
bool data = false;
switch (cmdI) {
case GetS: cmdO = MemCmd::ReadReq; break;
case GetX: cmdO = MemCmd::WriteReq; data = true; break;
case GetSEx:
case PutS:
case PutM:
case PutE:
case PutX:
case PutXE:
case Inv:
case FetchInv:
case FetchInvX:
case NACK:
case NULLCMD:
case GetSResp:
case GetXResp:
case FetchResp:
case FetchXResp:
out.fatal(CALL_INFO, 1, "Don't know how to convert "
"SST command %s to gem5\n",
CommandString[cmdI]);
}
Request::FlagsType flags = 0;
if (ev->queryFlag(MemEvent::F_LOCKED))
flags |= Request::LOCKED_RMW;
if (ev->queryFlag(MemEvent::F_NONCACHEABLE))
flags |= Request::UNCACHEABLE;
if (ev->isLoadLink()) {
assert(cmdI == GetS);
cmdO = MemCmd::LoadLockedReq;
} else if (ev->isStoreConditional()) {
assert(cmdI == GetX);
cmdO = MemCmd::StoreCondReq;
}
auto req = new Request(ev->getAddr(), ev->getSize(), flags, 0);
req->setThreadContext(ev->getGroupId(), 0);
auto pkt = new Packet(req, cmdO);
pkt->allocate();
if (data) {
pkt->setData(ev->getPayload().data());
}
pkt->pushSenderState(new SenderState(ev));
if (blocked() || !sendTimingReq(pkt))
sendQ.push_back(pkt);
}
bool
ExtMaster::recvTimingResp(PacketPtr pkt) {
if (simPhase == INIT) {
out.fatal(CALL_INFO, 1, "not prepared to handle INIT-phase traffic\n");
}
// get original SST packet from gem5 SenderState
auto senderState = dynamic_cast<SenderState*>(pkt->popSenderState());
if (!senderState)
out.fatal(CALL_INFO, 1, "gem5 senderState corrupt\n");
// make (new) response packet, discard (old) original request
MemEvent* ev = senderState->event;
delete senderState;
MemEvent* resp = ev->makeResponse();
delete ev;
// copy the payload and then destroy gem5 packet
resp->setPayload(pkt->getSize(), pkt->getPtr<uint8_t>());
delete pkt->req;
delete pkt;
nic->send(resp);
return true;
}
void
ExtMaster::recvReqRetry() {
while (blocked() && sendTimingReq(sendQ.front())) {
sendQ.pop_front();
}
}
void
ExtMaster::recvRangeChange() {
for (auto range : getAddrRanges()) {
if (ranges.find(range) == ranges.end()) { // i.e. if not found,
MemNIC::ComponentTypeInfo ti; // indicating a new range.
ti.rangeStart = range.start();
ti.rangeEnd = range.end();
ti.interleaveSize = 0;
ti.interleaveStep = 0;
nic->addTypeInfo(ti);
ranges.insert(range);
}
}
}