gem5/src/cpu/o3/commit.hh
Min Kyu Jeong 96375409ea O3: Fixes fetch deadlock when the interrupt clears before CPU handles it.
When this condition occurs the cpu should restart the fetch stage to fetch from
the original execution path. Fault handling in the commit stage is cleaned up a
little bit so the control flow is simplier. Finally, if an instruction is being
used to carry a fault it isn't executed, so the fault propagates appropriately.
2011-01-18 16:30:01 -06:00

468 lines
15 KiB
C++

/*
* Copyright (c) 2004-2006 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Kevin Lim
* Korey Sewell
*/
#ifndef __CPU_O3_COMMIT_HH__
#define __CPU_O3_COMMIT_HH__
#include "base/statistics.hh"
#include "cpu/timebuf.hh"
#include "cpu/exetrace.hh"
#include "cpu/inst_seq.hh"
class DerivO3CPUParams;
template <class>
class O3ThreadState;
/**
* DefaultCommit handles single threaded and SMT commit. Its width is
* specified by the parameters; each cycle it tries to commit that
* many instructions. The SMT policy decides which thread it tries to
* commit instructions from. Non- speculative instructions must reach
* the head of the ROB before they are ready to execute; once they
* reach the head, commit will broadcast the instruction's sequence
* number to the previous stages so that they can issue/ execute the
* instruction. Only one non-speculative instruction is handled per
* cycle. Commit is responsible for handling all back-end initiated
* redirects. It receives the redirect, and then broadcasts it to all
* stages, indicating the sequence number they should squash until,
* and any necessary branch misprediction information as well. It
* priortizes redirects by instruction's age, only broadcasting a
* redirect if it corresponds to an instruction that should currently
* be in the ROB. This is done by tracking the sequence number of the
* youngest instruction in the ROB, which gets updated to any
* squashing instruction's sequence number, and only broadcasting a
* redirect if it corresponds to an older instruction. Commit also
* supports multiple cycle squashing, to model a ROB that can only
* remove a certain number of instructions per cycle.
*/
template<class Impl>
class DefaultCommit
{
public:
// Typedefs from the Impl.
typedef typename Impl::O3CPU O3CPU;
typedef typename Impl::DynInstPtr DynInstPtr;
typedef typename Impl::CPUPol CPUPol;
typedef typename CPUPol::RenameMap RenameMap;
typedef typename CPUPol::ROB ROB;
typedef typename CPUPol::TimeStruct TimeStruct;
typedef typename CPUPol::FetchStruct FetchStruct;
typedef typename CPUPol::IEWStruct IEWStruct;
typedef typename CPUPol::RenameStruct RenameStruct;
typedef typename CPUPol::Fetch Fetch;
typedef typename CPUPol::IEW IEW;
typedef O3ThreadState<Impl> Thread;
/** Event class used to schedule a squash due to a trap (fault or
* interrupt) to happen on a specific cycle.
*/
class TrapEvent : public Event {
private:
DefaultCommit<Impl> *commit;
ThreadID tid;
public:
TrapEvent(DefaultCommit<Impl> *_commit, ThreadID _tid);
void process();
const char *description() const;
};
/** Overall commit status. Used to determine if the CPU can deschedule
* itself due to a lack of activity.
*/
enum CommitStatus{
Active,
Inactive
};
/** Individual thread status. */
enum ThreadStatus {
Running,
Idle,
ROBSquashing,
TrapPending,
FetchTrapPending
};
/** Commit policy for SMT mode. */
enum CommitPolicy {
Aggressive,
RoundRobin,
OldestReady
};
private:
/** Overall commit status. */
CommitStatus _status;
/** Next commit status, to be set at the end of the cycle. */
CommitStatus _nextStatus;
/** Per-thread status. */
ThreadStatus commitStatus[Impl::MaxThreads];
/** Commit policy used in SMT mode. */
CommitPolicy commitPolicy;
public:
/** Construct a DefaultCommit with the given parameters. */
DefaultCommit(O3CPU *_cpu, DerivO3CPUParams *params);
/** Returns the name of the DefaultCommit. */
std::string name() const;
/** Registers statistics. */
void regStats();
/** Sets the list of threads. */
void setThreads(std::vector<Thread *> &threads);
/** Sets the main time buffer pointer, used for backwards communication. */
void setTimeBuffer(TimeBuffer<TimeStruct> *tb_ptr);
void setFetchQueue(TimeBuffer<FetchStruct> *fq_ptr);
/** Sets the pointer to the queue coming from rename. */
void setRenameQueue(TimeBuffer<RenameStruct> *rq_ptr);
/** Sets the pointer to the queue coming from IEW. */
void setIEWQueue(TimeBuffer<IEWStruct> *iq_ptr);
/** Sets the pointer to the IEW stage. */
void setIEWStage(IEW *iew_stage);
/** Skid buffer between rename and commit. */
std::queue<DynInstPtr> skidBuffer;
/** The pointer to the IEW stage. Used solely to ensure that
* various events (traps, interrupts, syscalls) do not occur until
* all stores have written back.
*/
IEW *iewStage;
/** Sets pointer to list of active threads. */
void setActiveThreads(std::list<ThreadID> *at_ptr);
/** Sets pointer to the commited state rename map. */
void setRenameMap(RenameMap rm_ptr[Impl::MaxThreads]);
/** Sets pointer to the ROB. */
void setROB(ROB *rob_ptr);
/** Initializes stage by sending back the number of free entries. */
void initStage();
/** Initializes the draining of commit. */
bool drain();
/** Resumes execution after draining. */
void resume();
/** Completes the switch out of commit. */
void switchOut();
/** Takes over from another CPU's thread. */
void takeOverFrom();
/** Ticks the commit stage, which tries to commit instructions. */
void tick();
/** Handles any squashes that are sent from IEW, and adds instructions
* to the ROB and tries to commit instructions.
*/
void commit();
/** Returns the number of free ROB entries for a specific thread. */
size_t numROBFreeEntries(ThreadID tid);
/** Generates an event to schedule a squash due to a trap. */
void generateTrapEvent(ThreadID tid);
/** Records that commit needs to initiate a squash due to an
* external state update through the TC.
*/
void generateTCEvent(ThreadID tid);
private:
/** Updates the overall status of commit with the nextStatus, and
* tell the CPU if commit is active/inactive.
*/
void updateStatus();
/** Sets the next status based on threads' statuses, which becomes the
* current status at the end of the cycle.
*/
void setNextStatus();
/** Checks if the ROB is completed with squashing. This is for the case
* where the ROB can take multiple cycles to complete squashing.
*/
bool robDoneSquashing();
/** Returns if any of the threads have the number of ROB entries changed
* on this cycle. Used to determine if the number of free ROB entries needs
* to be sent back to previous stages.
*/
bool changedROBEntries();
/** Squashes all in flight instructions. */
void squashAll(ThreadID tid);
/** Handles squashing due to a trap. */
void squashFromTrap(ThreadID tid);
/** Handles squashing due to an TC write. */
void squashFromTC(ThreadID tid);
/** Handles squashing from instruction with SquashAfter set.
* This differs from the other squashes as it squashes following
* instructions instead of the current instruction and doesn't
* clean up various status bits about traps/tc writes pending.
*/
void squashAfter(ThreadID tid, uint64_t squash_after_seq_num);
#if FULL_SYSTEM
/** Handles processing an interrupt. */
void handleInterrupt();
/** Get fetch redirecting so we can handle an interrupt */
void propagateInterrupt();
#endif // FULL_SYSTEM
/** Commits as many instructions as possible. */
void commitInsts();
/** Tries to commit the head ROB instruction passed in.
* @param head_inst The instruction to be committed.
*/
bool commitHead(DynInstPtr &head_inst, unsigned inst_num);
/** Gets instructions from rename and inserts them into the ROB. */
void getInsts();
/** Insert all instructions from rename into skidBuffer */
void skidInsert();
/** Marks completed instructions using information sent from IEW. */
void markCompletedInsts();
/** Gets the thread to commit, based on the SMT policy. */
ThreadID getCommittingThread();
/** Returns the thread ID to use based on a round robin policy. */
ThreadID roundRobin();
/** Returns the thread ID to use based on an oldest instruction policy. */
ThreadID oldestReady();
public:
/** Reads the PC of a specific thread. */
TheISA::PCState pcState(ThreadID tid) { return pc[tid]; }
/** Sets the PC of a specific thread. */
void pcState(const TheISA::PCState &val, ThreadID tid)
{ pc[tid] = val; }
/** Returns the PC of a specific thread. */
Addr instAddr(ThreadID tid) { return pc[tid].instAddr(); }
/** Returns the next PC of a specific thread. */
Addr nextInstAddr(ThreadID tid) { return pc[tid].nextInstAddr(); }
/** Reads the micro PC of a specific thread. */
Addr microPC(ThreadID tid) { return pc[tid].microPC(); }
private:
/** Time buffer interface. */
TimeBuffer<TimeStruct> *timeBuffer;
/** Wire to write information heading to previous stages. */
typename TimeBuffer<TimeStruct>::wire toIEW;
/** Wire to read information from IEW (for ROB). */
typename TimeBuffer<TimeStruct>::wire robInfoFromIEW;
TimeBuffer<FetchStruct> *fetchQueue;
typename TimeBuffer<FetchStruct>::wire fromFetch;
/** IEW instruction queue interface. */
TimeBuffer<IEWStruct> *iewQueue;
/** Wire to read information from IEW queue. */
typename TimeBuffer<IEWStruct>::wire fromIEW;
/** Rename instruction queue interface, for ROB. */
TimeBuffer<RenameStruct> *renameQueue;
/** Wire to read information from rename queue. */
typename TimeBuffer<RenameStruct>::wire fromRename;
public:
/** ROB interface. */
ROB *rob;
private:
/** Pointer to O3CPU. */
O3CPU *cpu;
/** Vector of all of the threads. */
std::vector<Thread *> thread;
/** Records that commit has written to the time buffer this cycle. Used for
* the CPU to determine if it can deschedule itself if there is no activity.
*/
bool wroteToTimeBuffer;
/** Records if the number of ROB entries has changed this cycle. If it has,
* then the number of free entries must be re-broadcast.
*/
bool changedROBNumEntries[Impl::MaxThreads];
/** A counter of how many threads are currently squashing. */
ThreadID squashCounter;
/** Records if a thread has to squash this cycle due to a trap. */
bool trapSquash[Impl::MaxThreads];
/** Records if a thread has to squash this cycle due to an XC write. */
bool tcSquash[Impl::MaxThreads];
/** Priority List used for Commit Policy */
std::list<ThreadID> priority_list;
/** IEW to Commit delay, in ticks. */
unsigned iewToCommitDelay;
/** Commit to IEW delay, in ticks. */
unsigned commitToIEWDelay;
/** Rename to ROB delay, in ticks. */
unsigned renameToROBDelay;
unsigned fetchToCommitDelay;
/** Rename width, in instructions. Used so ROB knows how many
* instructions to get from the rename instruction queue.
*/
unsigned renameWidth;
/** Commit width, in instructions. */
unsigned commitWidth;
/** Number of Reorder Buffers */
unsigned numRobs;
/** Number of Active Threads */
ThreadID numThreads;
/** Is a drain pending. */
bool drainPending;
/** Is commit switched out. */
bool switchedOut;
/** The latency to handle a trap. Used when scheduling trap
* squash event.
*/
Tick trapLatency;
/** The interrupt fault. */
Fault interrupt;
/** The commit PC state of each thread. Refers to the instruction that
* is currently being processed/committed.
*/
TheISA::PCState pc[Impl::MaxThreads];
/** The sequence number of the youngest valid instruction in the ROB. */
InstSeqNum youngestSeqNum[Impl::MaxThreads];
/** Records if there is a trap currently in flight. */
bool trapInFlight[Impl::MaxThreads];
/** Records if there were any stores committed this cycle. */
bool committedStores[Impl::MaxThreads];
/** Records if commit should check if the ROB is truly empty (see
commit_impl.hh). */
bool checkEmptyROB[Impl::MaxThreads];
/** Pointer to the list of active threads. */
std::list<ThreadID> *activeThreads;
/** Rename map interface. */
RenameMap *renameMap[Impl::MaxThreads];
/** Updates commit stats based on this instruction. */
void updateComInstStats(DynInstPtr &inst);
/** Stat for the total number of committed instructions. */
Stats::Scalar commitCommittedInsts;
/** Stat for the total number of squashed instructions discarded by commit.
*/
Stats::Scalar commitSquashedInsts;
/** Stat for the total number of times commit is told to squash.
* @todo: Actually increment this stat.
*/
Stats::Scalar commitSquashEvents;
/** Stat for the total number of times commit has had to stall due to a non-
* speculative instruction reaching the head of the ROB.
*/
Stats::Scalar commitNonSpecStalls;
/** Stat for the total number of branch mispredicts that caused a squash. */
Stats::Scalar branchMispredicts;
/** Distribution of the number of committed instructions each cycle. */
Stats::Distribution numCommittedDist;
/** Total number of instructions committed. */
Stats::Vector statComInst;
/** Total number of software prefetches committed. */
Stats::Vector statComSwp;
/** Stat for the total number of committed memory references. */
Stats::Vector statComRefs;
/** Stat for the total number of committed loads. */
Stats::Vector statComLoads;
/** Total number of committed memory barriers. */
Stats::Vector statComMembars;
/** Total number of committed branches. */
Stats::Vector statComBranches;
/** Number of cycles where the commit bandwidth limit is reached. */
Stats::Scalar commitEligibleSamples;
/** Number of instructions not committed due to bandwidth limits. */
Stats::Vector commitEligible;
};
#endif // __CPU_O3_COMMIT_HH__