Use openbsd ide/atapi header files dev/alpha_console.cc: dev/alpha_console.hh: dev/baddev.cc: dev/baddev.hh: dev/disk_image.cc: dev/disk_image.hh: dev/tsunami_cchip.hh: dev/tsunami_io.hh: dev/tsunami_pchip.hh: Fix Doxygen comments dev/ide_disk.cc: Use BSD atapi/ide header files dev/ide_disk.hh: use ide/atapi header files --HG-- extra : convert_revision : a15e40c7d7cc52af6867821e9574ba5c47021721
197 lines
8 KiB
C
197 lines
8 KiB
C
/* $OpenBSD: wdcreg.h,v 1.13 2004/09/24 07:05:44 grange Exp $ */
|
|
/* $NetBSD: wdcreg.h,v 1.22 1999/03/07 14:02:54 bouyer Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* William Jolitz.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)wdreg.h 7.1 (Berkeley) 5/9/91
|
|
*/
|
|
|
|
#ifndef _DEV_IC_WDCREG_H_
|
|
#define _DEV_IC_WDCREG_H_
|
|
|
|
/*
|
|
* Controller register (wdr_ctlr)
|
|
*/
|
|
#define WDCTL_4BIT 0x08 /* use four head bits (wd1003) */
|
|
#define WDCTL_RST 0x04 /* reset the controller */
|
|
#define WDCTL_IDS 0x02 /* disable controller interrupts */
|
|
|
|
/*
|
|
* Status bits.
|
|
*/
|
|
#define WDCS_BSY 0x80 /* busy */
|
|
#define WDCS_DRDY 0x40 /* drive ready */
|
|
#define WDCS_DWF 0x20 /* drive write fault */
|
|
#define WDCS_DSC 0x10 /* drive seek complete */
|
|
#define WDCS_DRQ 0x08 /* data request */
|
|
#define WDCS_CORR 0x04 /* corrected data */
|
|
#define WDCS_IDX 0x02 /* index */
|
|
#define WDCS_ERR 0x01 /* error */
|
|
#define WDCS_BITS "\020\010BSY\007DRDY\006DWF\005DSC\004DRQ\003CORR\002IDX\001ERR"
|
|
|
|
/*
|
|
* Error bits.
|
|
*/
|
|
#define WDCE_BBK 0x80 /* bad block detected */
|
|
#define WDCE_CRC 0x80 /* CRC error (Ultra-DMA only) */
|
|
#define WDCE_UNC 0x40 /* uncorrectable data error */
|
|
#define WDCE_MC 0x20 /* media changed */
|
|
#define WDCE_IDNF 0x10 /* id not found */
|
|
#define WDCE_MCR 0x08 /* media change requested */
|
|
#define WDCE_ABRT 0x04 /* aborted command */
|
|
#define WDCE_TK0NF 0x02 /* track 0 not found */
|
|
#define WDCE_AMNF 0x01 /* address mark not found */
|
|
|
|
/*
|
|
* Commands for Disk Controller.
|
|
*/
|
|
#define WDCC_NOP 0x00 /* NOP - Always fail with "aborted command" */
|
|
#define WDCC_RECAL 0x10 /* disk restore code -- resets cntlr */
|
|
|
|
#define WDCC_READ 0x20 /* disk read code */
|
|
#define WDCC_WRITE 0x30 /* disk write code */
|
|
#define WDCC__LONG 0x02 /* modifier -- access ecc bytes */
|
|
#define WDCC__NORETRY 0x01 /* modifier -- no retrys */
|
|
|
|
#define WDCC_FORMAT 0x50 /* disk format code */
|
|
#define WDCC_DIAGNOSE 0x90 /* controller diagnostic */
|
|
#define WDCC_IDP 0x91 /* initialize drive parameters */
|
|
|
|
#define WDCC_READMULTI 0xc4 /* read multiple */
|
|
#define WDCC_WRITEMULTI 0xc5 /* write multiple */
|
|
#define WDCC_SETMULTI 0xc6 /* set multiple mode */
|
|
|
|
#define WDCC_READDMA 0xc8 /* read with DMA */
|
|
#define WDCC_WRITEDMA 0xca /* write with DMA */
|
|
|
|
#define WDCC_ACKMC 0xdb /* acknowledge media change */
|
|
#define WDCC_LOCK 0xde /* lock drawer */
|
|
#define WDCC_UNLOCK 0xdf /* unlock drawer */
|
|
|
|
#define WDCC_FLUSHCACHE 0xe7 /* Flush cache */
|
|
#define WDCC_IDENTIFY 0xec /* read parameters from controller */
|
|
#define SET_FEATURES 0xef /* set features */
|
|
|
|
#define WDCC_IDLE 0xe3 /* set idle timer & enter idle mode */
|
|
#define WDCC_IDLE_IMMED 0xe1 /* enter idle mode */
|
|
#define WDCC_SLEEP 0xe6 /* enter sleep mode */
|
|
#define WDCC_STANDBY 0xe2 /* set standby timer & enter standby mode */
|
|
#define WDCC_STANDBY_IMMED 0xe0 /* enter standby mode */
|
|
#define WDCC_CHECK_PWR 0xe5 /* check power mode */
|
|
|
|
#define WDCC_READ_EXT 0x24 /* read 48-bit addressing */
|
|
#define WDCC_WRITE_EXT 0x34 /* write 48-bit addressing */
|
|
|
|
#define WDCC_READMULTI_EXT 0x29 /* read multiple 48-bit addressing */
|
|
#define WDCC_WRITEMULTI_EXT 0x39 /* write multiple 48-bit addressing */
|
|
|
|
#define WDCC_READDMA_EXT 0x25 /* read 48-bit addressing with DMA */
|
|
#define WDCC_WRITEDMA_EXT 0x35 /* write 48-bit addressing with DMA */
|
|
|
|
#define WDCC_FLUSHCACHE_EXT 0xea /* 48-bit addressing flush cache */
|
|
|
|
/* Subcommands for SET_FEATURES (features register ) */
|
|
#define WDSF_8BIT_PIO_EN 0x01 /* Enable 8bit PIO (CFA featureset) */
|
|
#define WDSF_EN_WR_CACHE 0x02
|
|
#define WDSF_SET_MODE 0x03
|
|
#define WDSF_REASSIGN_EN 0x04 /* Obsolete in ATA-6 */
|
|
#define WDSF_APM_EN 0x05 /* Enable Adv. Power Management */
|
|
#define WDSF_PUIS_EN 0x06 /* Enable Power-Up In Standby */
|
|
#define WDSF_PUIS_SPINUP 0x07 /* Power-Up In Standby spin-up */
|
|
#define WDSF_CFA_MODE1_EN 0x0A /* Enable CFA power mode 1 */
|
|
#define WDSF_RMSN_DS 0x31 /* Disable Removable Media Status */
|
|
#define WDSF_RETRY_DS 0x33 /* Obsolete in ATA-6 */
|
|
#define WDSF_AAM_EN 0x42 /* Enable Autom. Acoustic Management */
|
|
#define WDSF_SET_CACHE_SGMT 0x54 /* Obsolete in ATA-6 */
|
|
#define WDSF_READAHEAD_DS 0x55 /* Disable read look-ahead */
|
|
#define WDSF_RLSE_EN 0x5D /* Enable release interrupt */
|
|
#define WDSF_SRV_EN 0x5E /* Enable SERVICE interrupt */
|
|
#define WDSF_POD_DS 0x66
|
|
#define WDSF_ECC_DS 0x77
|
|
#define WDSF_8BIT_PIO_DS 0x81 /* Disable 8bit PIO (CFA featureset) */
|
|
#define WDSF_WRITE_CACHE_DS 0x82
|
|
#define WDSF_REASSIGN_DS 0x84
|
|
#define WDSF_APM_DS 0x85 /* Disable Adv. Power Management */
|
|
#define WDSF_PUIS_DS 0x86 /* Disable Power-Up In Standby */
|
|
#define WDSF_ECC_EN 0x88
|
|
#define WDSF_CFA_MODE1_DS 0x8A /* Disable CFA power mode 1 */
|
|
#define WDSF_RMSN_EN 0x95 /* Enable Removable Media Status */
|
|
#define WDSF_RETRY_EN 0x99 /* Obsolete in ATA-6 */
|
|
#define WDSF_SET_CURRENT 0x9A /* Obsolete in ATA-6 */
|
|
#define WDSF_READAHEAD_EN 0xAA
|
|
#define WDSF_PREFETCH_SET 0xAB /* Obsolete in ATA-6 */
|
|
#define WDSF_AAM_DS 0xC2 /* Disable Autom. Acoustic Management */
|
|
#define WDSF_POD_EN 0xCC
|
|
#define WDSF_RLSE_DS 0xDD /* Disable release interrupt */
|
|
#define WDSF_SRV_DS 0xDE /* Disable SERVICE interrupt */
|
|
#define WDSF_READ_NATIVE_MAX 0xF8
|
|
#define WDSF_SEEK 0x70
|
|
#define WDSF_VERIFY 0x40
|
|
|
|
/* parameters uploaded to device/heads register */
|
|
#define WDSD_IBM 0xa0 /* forced to 512 byte sector, ecc */
|
|
#define WDSD_CHS 0x00 /* cylinder/head/sector addressing */
|
|
#define WDSD_LBA 0x40 /* logical block addressing */
|
|
|
|
/* Commands for ATAPI devices */
|
|
#define ATAPI_CHECK_POWER_MODE 0xe5
|
|
#define ATAPI_EXEC_DRIVE_DIAGS 0x90
|
|
#define ATAPI_IDLE_IMMEDIATE 0xe1
|
|
#define ATAPI_NOP 0x00
|
|
#define ATAPI_PKT_CMD 0xa0
|
|
#define ATAPI_IDENTIFY_DEVICE 0xa1
|
|
#define ATAPI_SOFT_RESET 0x08
|
|
#define ATAPI_DEVICE_RESET 0x08 /* ATA/ATAPI-5 name for soft reset */
|
|
#define ATAPI_SLEEP 0xe6
|
|
#define ATAPI_STANDBY_IMMEDIATE 0xe0
|
|
#define ATAPI_SMART 0xB0 /* SMART operations */
|
|
#define ATAPI_SETMAX 0xF9 /* Set Max Address */
|
|
#define ATAPI_WRITEEXT 0x34 /* Write sectors Ext */
|
|
#define ATAPI_SETMAXEXT 0x37 /* Set Max Address Ext */
|
|
#define ATAPI_WRITEMULTIEXT 0x39 /* Write Multi Ext */
|
|
|
|
/* Bytes used by ATAPI_PACKET_COMMAND ( feature register) */
|
|
#define ATAPI_PKT_CMD_FTRE_DMA 0x01
|
|
#define ATAPI_PKT_CMD_FTRE_OVL 0x02
|
|
|
|
/* ireason */
|
|
#define WDCI_CMD 0x01 /* command(1) or data(0) */
|
|
#define WDCI_IN 0x02 /* transfer to(1) or from(0) the host */
|
|
#define WDCI_RELEASE 0x04 /* bus released until completion */
|
|
|
|
#define PHASE_CMDOUT (WDCS_DRQ | WDCI_CMD)
|
|
#define PHASE_DATAIN (WDCS_DRQ | WDCI_IN)
|
|
#define PHASE_DATAOUT WDCS_DRQ
|
|
#define PHASE_COMPLETED (WDCI_IN | WDCI_CMD)
|
|
#define PHASE_ABORTED 0
|
|
|
|
#endif /* !_DEV_IC_WDCREG_H_ */
|