gem5/dev/pcidev.hh
Ali Saidi 6dc3b2fa39 make ide disk work for newmem
SConscript:
    compile ide devices
base/chunk_generator.hh:
    add another parameter to the chuck generator called complete() which
    returns the number of bytes transfered so far. Very useful for
    adding to a pointer.
configs/test/fs.py:
    Add ide disk to fs test configuration
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
dev/io_device.cc:
dev/io_device.hh:
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/pcidev.cc:
dev/pcidev.hh:
    update for new memory system
mem/bus.cc:
    support devices that return multiple ranges
    remove old ranges before using new info
mem/packet.hh:
    make senderstate void* per steve's request that we use every
    construct possible in C++
mem/physical.cc:
    have memory stamp the packet with the time.
mem/physical.hh:
    actually set the memory latency variable
python/m5/objects/Device.py:
    Add DmaDevice
python/m5/objects/Ide.py:
    Ide disk no longer has a physmem pointer
python/m5/objects/Pci.py:
    update pci device for newmem
python/m5/objects/PhysicalMemory.py:
    add latency parameter for physical memory
sim/byteswap.hh:
    use fast architecture dependent byteswap calls if they exist

--HG--
extra : convert_revision : e3cf2e8f61064ad302d94bc22010a00c59f3f793
2006-04-20 17:14:30 -04:00

230 lines
6.8 KiB
C++

/*
* Copyright (c) 2004-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* @file
* Interface for devices using PCI configuration
*/
#ifndef __DEV_PCIDEV_HH__
#define __DEV_PCIDEV_HH__
#include "dev/io_device.hh"
#include "dev/pcireg.h"
#include "dev/platform.hh"
#define BAR_IO_MASK 0x3
#define BAR_MEM_MASK 0xF
#define BAR_IO_SPACE_BIT 0x1
#define BAR_IO_SPACE(x) ((x) & BAR_IO_SPACE_BIT)
#define BAR_NUMBER(x) (((x) - PCI0_BASE_ADDR0) >> 0x2);
class PciConfigAll;
/**
* This class encapulates the first 64 bytes of a singles PCI
* devices config space that in configured by the configuration file.
*/
class PciConfigData : public SimObject
{
public:
/**
* Constructor to initialize the devices config space to 0.
*/
PciConfigData(const std::string &name)
: SimObject(name)
{
memset(config.data, 0, sizeof(config.data));
memset(BARAddrs, 0, sizeof(BARAddrs));
memset(BARSize, 0, sizeof(BARSize));
}
/** The first 64 bytes */
PCIConfig config;
/** The size of the BARs */
uint32_t BARSize[6];
/** The addresses of the BARs */
Addr BARAddrs[6];
};
/**
* PCI device, base implemnation is only config space.
* Each device is connected to a PCIConfigSpace device
* which returns -1 for everything but the pcidevs that
* register with it. This object registers with the PCIConfig space
* object.
*/
class PciDev : public DmaDevice
{
public:
struct Params : public ::PioDevice::Params
{
/**
* A pointer to the configspace all object that calls us when
* a read comes to this particular device/function.
*/
PciConfigAll *configSpace;
/**
* A pointer to the object that contains the first 64 bytes of
* config space
*/
PciConfigData *configData;
/** The bus number we are on */
uint32_t busNum;
/** The device number we have */
uint32_t deviceNum;
/** The function number */
uint32_t functionNum;
/** The latency for pio accesses. */
Tick pio_delay;
};
public:
const Params *params() const { return (const Params *)_params; }
protected:
/** The current config space. Unlike the PciConfigData this is
* updated during simulation while continues to reflect what was
* in the config file.
*/
PCIConfig config;
/** The size of the BARs */
uint32_t BARSize[6];
/** The current address mapping of the BARs */
Addr BARAddrs[6];
bool
isBAR(Addr addr, int bar) const
{
assert(bar >= 0 && bar < 6);
return BARAddrs[bar] <= addr && addr < BARAddrs[bar] + BARSize[bar];
}
int
getBAR(Addr addr)
{
for (int i = 0; i <= 5; ++i)
if (isBAR(addr, i))
return i;
return -1;
}
bool
getBAR(Addr paddr, Addr &daddr, int &bar)
{
int b = getBAR(paddr);
if (b < 0)
return false;
daddr = paddr - BARAddrs[b];
bar = b;
return true;
}
protected:
Platform *plat;
PciConfigData *configData;
Tick pioDelay;
public:
Addr pciToDma(Addr pciAddr) const
{ return plat->pciToDma(pciAddr); }
void
intrPost()
{ plat->postPciInt(configData->config.interruptLine); }
void
intrClear()
{ plat->clearPciInt(configData->config.interruptLine); }
uint8_t
interruptLine()
{ return configData->config.interruptLine; }
/** return the address ranges that this device responds to.
* @params range_list range list to populate with ranges
*/
void addressRanges(AddrRangeList &range_list);
/**
* Constructor for PCI Dev. This function copies data from the
* config file object PCIConfigData and registers the device with
* a PciConfigAll object.
*/
PciDev(Params *params);
/**
* Write to the PCI config space data that is stored locally. This may be
* overridden by the device but at some point it will eventually call this
* for normal operations that it does not need to override.
* @param offset the offset into config space
* @param size the size of the write
* @param data the data to write
*/
virtual void writeConfig(int offset, const uint8_t data);
virtual void writeConfig(int offset, const uint16_t data);
virtual void writeConfig(int offset, const uint32_t data);
/**
* Read from the PCI config space data that is stored locally. This may be
* overridden by the device but at some point it will eventually call this
* for normal operations that it does not need to override.
* @param offset the offset into config space
* @param size the size of the read
* @param data pointer to the location where the read value should be stored
*/
virtual void readConfig(int offset, uint8_t *data);
virtual void readConfig(int offset, uint16_t *data);
virtual void readConfig(int offset, uint32_t *data);
/**
* Serialize this object to the given output stream.
* @param os The stream to serialize to.
*/
virtual void serialize(std::ostream &os);
/**
* Reconstruct the state of this object from a checkpoint.
* @param cp The checkpoint use.
* @param section The section name of this object
*/
virtual void unserialize(Checkpoint *cp, const std::string &section);
};
#endif // __DEV_PCIDEV_HH__