gem5/configs/example/fs.py
Andreas Hansson 2f5262eb67 config: Make configs/common a Python package
Continue along the same line as the recent patch that made the
Ruby-related config scripts Python packages and make also the
configs/common directory a package.

All affected config scripts are updated (hopefully).

Note that this change makes it apparent that the current organisation
and naming of the config directory and its subdirectories is rather
chaotic. We mix scripts that are directly invoked with scripts that
merely contain convenience functions. While it is not addressed in
this patch we should follow up with a re-organisation of the
config structure, and renaming of some of the packages.
2016-10-14 10:37:38 -04:00

369 lines
15 KiB
Python

# Copyright (c) 2010-2013, 2016 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2012-2014 Mark D. Hill and David A. Wood
# Copyright (c) 2009-2011 Advanced Micro Devices, Inc.
# Copyright (c) 2006-2007 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Ali Saidi
# Brad Beckmann
import optparse
import sys
import m5
from m5.defines import buildEnv
from m5.objects import *
from m5.util import addToPath, fatal
addToPath('../')
from ruby import Ruby
from common.FSConfig import *
from common.SysPaths import *
from common.Benchmarks import *
from common import Simulation
from common import CacheConfig
from common import MemConfig
from common.Caches import *
from common import Options
# Check if KVM support has been enabled, we might need to do VM
# configuration if that's the case.
have_kvm_support = 'BaseKvmCPU' in globals()
def is_kvm_cpu(cpu_class):
return have_kvm_support and cpu_class != None and \
issubclass(cpu_class, BaseKvmCPU)
def cmd_line_template():
if options.command_line and options.command_line_file:
print "Error: --command-line and --command-line-file are " \
"mutually exclusive"
sys.exit(1)
if options.command_line:
return options.command_line
if options.command_line_file:
return open(options.command_line_file).read().strip()
return None
def build_test_system(np):
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == "alpha":
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0], options.ruby,
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "mips":
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "sparc":
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "x86":
test_sys = makeLinuxX86System(test_mem_mode, options.num_cpus, bm[0],
options.ruby, cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == "arm":
test_sys = makeArmSystem(test_mem_mode, options.machine_type,
options.num_cpus, bm[0], options.dtb_filename,
bare_metal=options.bare_metal,
cmdline=cmdline,
external_memory=options.external_memory_system,
ruby=options.ruby)
if options.enable_context_switch_stats_dump:
test_sys.enable_context_switch_stats_dump = True
else:
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
# Set the cache line size for the entire system
test_sys.cache_line_size = options.cacheline_size
# Create a top-level voltage domain
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
# Create a source clock for the system and set the clock period
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = test_sys.voltage_domain)
# Create a CPU voltage domain
test_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
test_sys.cpu_voltage_domain)
if options.kernel is not None:
test_sys.kernel = binary(options.kernel)
if options.script is not None:
test_sys.readfile = options.script
if options.lpae:
test_sys.have_lpae = True
if options.virtualisation:
test_sys.have_virtualization = True
test_sys.init_param = options.init_param
# For now, assign all the CPUs to the same clock domain
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
for i in xrange(np)]
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
test_sys.vm = KvmVM()
if options.ruby:
# Check for timing mode because ruby does not support atomic accesses
if not (options.cpu_type == "detailed" or options.cpu_type == "timing"):
print >> sys.stderr, "Ruby requires TimingSimpleCPU or O3CPU!!"
sys.exit(1)
Ruby.create_system(options, True, test_sys, test_sys.iobus,
test_sys._dma_ports)
# Create a seperate clock domain for Ruby
test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = test_sys.voltage_domain)
# Connect the ruby io port to the PIO bus,
# assuming that there is just one such port.
test_sys.iobus.master = test_sys.ruby._io_port.slave
for (i, cpu) in enumerate(test_sys.cpu):
#
# Tie the cpu ports to the correct ruby system ports
#
cpu.clk_domain = test_sys.cpu_clk_domain
cpu.createThreads()
cpu.createInterruptController()
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in ("x86", "arm"):
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
if buildEnv['TARGET_ISA'] in "x86":
cpu.interrupts[0].pio = test_sys.ruby._cpu_ports[i].master
cpu.interrupts[0].int_master = test_sys.ruby._cpu_ports[i].slave
cpu.interrupts[0].int_slave = test_sys.ruby._cpu_ports[i].master
else:
if options.caches or options.l2cache:
# By default the IOCache runs at the system clock
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
test_sys.iocache.cpu_side = test_sys.iobus.master
test_sys.iocache.mem_side = test_sys.membus.slave
elif not options.external_memory_system:
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
test_sys.iobridge.slave = test_sys.iobus.master
test_sys.iobridge.master = test_sys.membus.slave
# Sanity check
if options.fastmem:
if TestCPUClass != AtomicSimpleCPU:
fatal("Fastmem can only be used with atomic CPU!")
if (options.caches or options.l2cache):
fatal("You cannot use fastmem in combination with caches!")
if options.simpoint_profile:
if not options.fastmem:
# Atomic CPU checked with fastmem option already
fatal("SimPoint generation should be done with atomic cpu and fastmem")
if np > 1:
fatal("SimPoint generation not supported with more than one CPUs")
for i in xrange(np):
if options.fastmem:
test_sys.cpu[i].fastmem = True
if options.simpoint_profile:
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
test_sys.cpu[i].addCheckerCpu()
test_sys.cpu[i].createThreads()
# If elastic tracing is enabled when not restoring from checkpoint and
# when not fast forwarding using the atomic cpu, then check that the
# TestCPUClass is DerivO3CPU or inherits from DerivO3CPU. If the check
# passes then attach the elastic trace probe.
# If restoring from checkpoint or fast forwarding, the code that does this for
# FutureCPUClass is in the Simulation module. If the check passes then the
# elastic trace probe is attached to the switch CPUs.
if options.elastic_trace_en and options.checkpoint_restore == None and \
not options.fast_forward:
CpuConfig.config_etrace(TestCPUClass, test_sys.cpu, options)
CacheConfig.config_cache(options, test_sys)
MemConfig.config_mem(options, test_sys)
return test_sys
def build_drive_system(np):
# driver system CPU is always simple, so is the memory
# Note this is an assignment of a class, not an instance.
DriveCPUClass = AtomicSimpleCPU
drive_mem_mode = 'atomic'
DriveMemClass = SimpleMemory
cmdline = cmd_line_template()
if buildEnv['TARGET_ISA'] == 'alpha':
drive_sys = makeLinuxAlphaSystem(drive_mem_mode, bm[1], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == 'mips':
drive_sys = makeLinuxMipsSystem(drive_mem_mode, bm[1], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == 'sparc':
drive_sys = makeSparcSystem(drive_mem_mode, bm[1], cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == 'x86':
drive_sys = makeLinuxX86System(drive_mem_mode, np, bm[1],
cmdline=cmdline)
elif buildEnv['TARGET_ISA'] == 'arm':
drive_sys = makeArmSystem(drive_mem_mode, options.machine_type, np,
bm[1], options.dtb_filename, cmdline=cmdline)
# Create a top-level voltage domain
drive_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
# Create a source clock for the system and set the clock period
drive_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = drive_sys.voltage_domain)
# Create a CPU voltage domain
drive_sys.cpu_voltage_domain = VoltageDomain()
# Create a source clock for the CPUs and set the clock period
drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
drive_sys.cpu_voltage_domain)
drive_sys.cpu = DriveCPUClass(clk_domain=drive_sys.cpu_clk_domain,
cpu_id=0)
drive_sys.cpu.createThreads()
drive_sys.cpu.createInterruptController()
drive_sys.cpu.connectAllPorts(drive_sys.membus)
if options.fastmem:
drive_sys.cpu.fastmem = True
if options.kernel is not None:
drive_sys.kernel = binary(options.kernel)
if is_kvm_cpu(DriveCPUClass):
drive_sys.vm = KvmVM()
drive_sys.iobridge = Bridge(delay='50ns',
ranges = drive_sys.mem_ranges)
drive_sys.iobridge.slave = drive_sys.iobus.master
drive_sys.iobridge.master = drive_sys.membus.slave
# Create the appropriate memory controllers and connect them to the
# memory bus
drive_sys.mem_ctrls = [DriveMemClass(range = r)
for r in drive_sys.mem_ranges]
for i in xrange(len(drive_sys.mem_ctrls)):
drive_sys.mem_ctrls[i].port = drive_sys.membus.master
drive_sys.init_param = options.init_param
return drive_sys
# Add options
parser = optparse.OptionParser()
Options.addCommonOptions(parser)
Options.addFSOptions(parser)
# Add the ruby specific and protocol specific options
if '--ruby' in sys.argv:
Ruby.define_options(parser)
(options, args) = parser.parse_args()
if args:
print "Error: script doesn't take any positional arguments"
sys.exit(1)
# system under test can be any CPU
(TestCPUClass, test_mem_mode, FutureClass) = Simulation.setCPUClass(options)
# Match the memories with the CPUs, based on the options for the test system
TestMemClass = Simulation.setMemClass(options)
if options.benchmark:
try:
bm = Benchmarks[options.benchmark]
except KeyError:
print "Error benchmark %s has not been defined." % options.benchmark
print "Valid benchmarks are: %s" % DefinedBenchmarks
sys.exit(1)
else:
if options.dual:
bm = [SysConfig(disk=options.disk_image, rootdev=options.root_device,
mem=options.mem_size, os_type=options.os_type),
SysConfig(disk=options.disk_image, rootdev=options.root_device,
mem=options.mem_size, os_type=options.os_type)]
else:
bm = [SysConfig(disk=options.disk_image, rootdev=options.root_device,
mem=options.mem_size, os_type=options.os_type)]
np = options.num_cpus
test_sys = build_test_system(np)
if len(bm) == 2:
drive_sys = build_drive_system(np)
root = makeDualRoot(True, test_sys, drive_sys, options.etherdump)
elif len(bm) == 1 and options.dist:
# This system is part of a dist-gem5 simulation
root = makeDistRoot(test_sys,
options.dist_rank,
options.dist_size,
options.dist_server_name,
options.dist_server_port,
options.dist_sync_repeat,
options.dist_sync_start,
options.ethernet_linkspeed,
options.ethernet_linkdelay,
options.etherdump);
elif len(bm) == 1:
root = Root(full_system=True, system=test_sys)
else:
print "Error I don't know how to create more than 2 systems."
sys.exit(1)
if options.timesync:
root.time_sync_enable = True
if options.frame_capture:
VncServer.frame_capture = True
Simulation.setWorkCountOptions(test_sys, options)
Simulation.run(options, root, test_sys, FutureClass)