gem5/configs/common/HMC.py
Nilay Vaish 6433a10749 configs: fix bug introduced due to 276ad9121192
I had made a typo in changeset 276ad9121192.  This changeset fixes it
2015-11-04 12:36:28 -06:00

238 lines
11 KiB
Python

# Copyright (c) 2012-2013 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2015 The University of Bologna
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Erfan Azarkhish
# A Simplified model of a complete HMC device. Based on:
# [1] http://www.hybridmemorycube.org/specification-download/
# [2] High performance AXI-4.0 based interconnect for extensible smart memory
# cubes(E. Azarkhish et. al)
# [3] Low-Power Hybrid Memory Cubes With Link Power Management and Two-Level
# Prefetching (J. Ahn et. al)
# [4] Memory-centric system interconnect design with Hybrid Memory Cubes
# (G. Kim et. al)
# [5] Near Data Processing, Are we there yet? (M. Gokhale)
# http://www.cs.utah.edu/wondp/gokhale.pdf
#
# This script builds a complete HMC device composed of vault controllers,
# serial links, the main internal crossbar, and an external hmc controller.
#
# - VAULT CONTROLLERS:
# Instances of the HMC_2500_x32 class with their functionality specified in
# dram_ctrl.cc
#
# - THE MAIN XBAR:
# This component is simply an instance of the NoncoherentXBar class, and its
# parameters are tuned to [2].
#
# - SERIAL LINKS:
# SerialLink is a simple variation of the Bridge class, with the ability to
# account for the latency of packet serialization. We assume that the
# serializer component at the transmitter side does not need to receive the
# whole packet to start the serialization. But the deserializer waits for
# the complete packet to check its integrity first.
# * Bandwidth of the serial links is not modeled in the SerialLink component
# itself. Instead bandwidth/port of the HMCController has been adjusted to
# reflect the bandwidth delivered by 1 serial link.
#
# - HMC CONTROLLER:
# Contains a large buffer (modeled with Bridge) to hide the access latency
# of the memory cube. Plus it simply forwards the packets to the serial
# links in a round-robin fashion to balance load among them.
# * It is inferred from the standard [1] and the literature [3] that serial
# links share the same address range and packets can travel over any of
# them so a load distribution mechanism is required among them.
import optparse
import m5
from m5.objects import *
# A single Hybrid Memory Cube (HMC)
class HMCSystem(SimObject):
#*****************************CROSSBAR PARAMETERS*************************
# Flit size of the main interconnect [1]
xbar_width = Param.Unsigned( 32, "Data width of the main XBar (Bytes)")
# Clock frequency of the main interconnect [1]
# This crossbar, is placed on the logic-based of the HMC and it has its
# own voltage and clock domains, different from the DRAM dies or from the
# host.
xbar_frequency = Param.Frequency('1GHz', "Clock Frequency of the main "
"XBar")
# Arbitration latency of the HMC XBar [1]
xbar_frontend_latency = Param.Cycles(1, "Arbitration latency of the XBar")
# Latency to forward a packet via the interconnect [1](two levels of FIFOs
# at the input and output of the inteconnect)
xbar_forward_latency = Param.Cycles(2, "Forward latency of the XBar")
# Latency to forward a response via the interconnect [1](two levels of
# FIFOs at the input and output of the inteconnect)
xbar_response_latency = Param.Cycles(2, "Response latency of the XBar")
#*****************************SERIAL LINK PARAMETERS**********************
# Number of serial links [1]
num_serial_links = Param.Unsigned(4, "Number of serial links")
# Number of packets (not flits) to store at the request side of the serial
# link. This number should be adjusted to achive required bandwidth
link_buffer_size_req = Param.Unsigned( 16, "Number of packets to buffer "
"at the request side of the serial link")
# Number of packets (not flits) to store at the response side of the serial
# link. This number should be adjusted to achive required bandwidth
link_buffer_size_rsp = Param.Unsigned( 16, "Number of packets to buffer "
"at the response side of the serial link")
# Latency of the serial link composed by SER/DES latency (1.6ns [4]) plus
# the PCB trace latency (3ns Estimated based on [5])
link_latency = Param.Latency('4.6ns', "Latency of the serial links")
# Header overhead of the serial links: Header size is 128bits in HMC [1],
# and we have 16 lanes, so the overhead is 8 cycles
link_overhead = Param.Cycles(8, "The number of cycles required to"
" transmit the packet header over the serial link")
# Clock frequency of the serial links [1]
link_frequency = Param.Frequency('10GHz', "Clock Frequency of the serial"
"links")
# Number of parallel lanes in each serial link [1]
num_lanes_per_link = Param.Unsigned( 16, "Number of lanes per each link")
# Number of serial links [1]
num_serial_links = Param.Unsigned( 4, "Number of serial links")
#*****************************HMC CONTROLLER PARAMETERS*******************
# Number of packets (not flits) to store at the HMC controller. This
# number should be high enough to be able to hide the high latency of HMC
ctrl_buffer_size_req = Param.Unsigned( 256, "Number of packets to buffer "
"at the HMC controller (request side)")
# Number of packets (not flits) to store at the response side of the HMC
# controller.
ctrl_buffer_size_rsp = Param.Unsigned( 256, "Number of packets to buffer "
"at the HMC controller (response side)")
# Latency of the HMC controller to process the packets
# (ClockDomain = Host clock domain)
ctrl_latency = Param.Cycles(4, "The number of cycles required for the "
" controller to process the packet")
# Wiring latency from the SoC crossbar to the HMC controller
ctrl_static_latency = Param.Latency('500ps', "Static latency of the HMC"
"controller")
#*****************************PERFORMANCE MONITORING**********************
# The main monitor behind the HMC Controller
enable_global_monitor = Param.Bool(True, "The main monitor behind the "
"HMC Controller")
# The link performance monitors
enable_link_monitor = Param.Bool(True, "The link monitors" )
# Create an HMC device and attach it to the current system
def config_hmc(options, system):
system.hmc=HMCSystem()
system.buffer = Bridge(ranges=system.mem_ranges,
req_size=system.hmc.ctrl_buffer_size_req,
resp_size=system.hmc.ctrl_buffer_size_rsp,
delay=system.hmc.ctrl_static_latency)
try:
system.hmc.enable_global_monitor = options.enable_global_monitor
except:
pass;
try:
system.hmc.enable_link_monitor = options.enable_link_monitor
except:
pass;
system.membus.master = system.buffer.slave
# The HMC controller (Clock domain is the same as the host)
system.hmccontroller = HMCController(width=(system.hmc.num_lanes_per_link.
value * system.hmc.num_serial_links/8),
frontend_latency=system.hmc.ctrl_latency,
forward_latency=system.hmc.link_overhead,
response_latency=system.hmc.link_overhead)
system.hmccontroller.clk_domain = SrcClockDomain(clock=system.hmc.
link_frequency, voltage_domain = VoltageDomain(voltage = '1V'))
# Serial Links
system.hmc.seriallink =[ SerialLink(ranges = system.mem_ranges,
req_size=system.hmc.link_buffer_size_req,
resp_size=system.hmc.link_buffer_size_rsp,
num_lanes=system.hmc.num_lanes_per_link,
delay=system.hmc.link_latency)
for i in xrange(system.hmc.num_serial_links)]
if system.hmc.enable_link_monitor:
system.hmc.lmonitor = [ CommMonitor()
for i in xrange(system.hmc.num_serial_links)]
# The HMC Crossbar located in its logic-base (LoB)
system.hmc.xbar = NoncoherentXBar(width = system.hmc.xbar_width,
frontend_latency=system.hmc.xbar_frontend_latency,
forward_latency=system.hmc.xbar_forward_latency,
response_latency=system.hmc.xbar_response_latency )
system.hmc.xbar.clk_domain = SrcClockDomain(clock =
system.hmc.xbar_frequency, voltage_domain =
VoltageDomain(voltage = '1V'))
if system.hmc.enable_global_monitor:
system.gmonitor = CommMonitor()
system.buffer.master = system.gmonitor.slave
system.gmonitor.master = system.hmccontroller.slave
else:
system.hmccontroller.slave = system.buffer.master
for i in xrange(system.hmc.num_serial_links):
system.hmccontroller.master = system.hmc.seriallink[i].slave
system.hmc.seriallink[i].clk_domain = system.hmccontroller.clk_domain;
if system.hmc.enable_link_monitor:
system.hmc.seriallink[i].master = system.hmc.lmonitor[i].slave
system.hmc.lmonitor[i].master = system.hmc.xbar.slave
else:
system.hmc.seriallink[i].master = system.hmc.xbar.slave