gem5/sim/system.cc
Nathan Binkert 8a0bc84022 Allow CPUs to specify their own CPU ids.
Make the AlphaConsole calculate the number of CPUs instead
of passing that in as a parameter.

cpu/base.cc:
    pass the desired cpu_id into registerExecContext, offsetting it
    by the thread number.  a cpu_id of -1 means that it should be
    generated for you.
cpu/base.hh:
    Take the cpu_id as a parameter
cpu/o3/alpha_cpu_builder.cc:
cpu/simple/cpu.cc:
    Accept the cpu_id as a parameter
    while we're here, let's remove the multiplier since it is
    not used.
dev/alpha_console.cc:
    don't take the number of CPUs as a parameter.  Calculate it from
    the system based on the number of CPUs that have been registered.
    move init() code to startup() to ensure that all CPUs are registerd.
dev/alpha_console.hh:
python/m5/objects/AlphaConsole.py:
    don't take the number of CPUs as a parameter.
    move init() code to startup() to ensure that all CPUs are registerd.
python/m5/objects/BaseCPU.py:
    take the cpu_id as a parameter.  Default it to -1 which means
    that it will be generated.
sim/system.cc:
    allow the registerExecContext functioin to take a desired
    cpu_id as a parameter.  Check to ensure that the id isn't
    already used.  Accept -1 as a request to have an id assigned.
sim/system.hh:
    keep track of the number of registered exec contexts.
    provide a function for accessing the number of exec contexts
    that checks to ensure that they are all registered correctly.

--HG--
extra : convert_revision : 8e12f96ff8a49fa16cdbbdb4c05c651376c35788
2005-06-29 01:20:41 -04:00

367 lines
10 KiB
C++

/*
* Copyright (c) 2002-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "base/loader/object_file.hh"
#include "base/loader/symtab.hh"
#include "base/remote_gdb.hh"
#include "cpu/exec_context.hh"
#include "kern/kernel_stats.hh"
#include "mem/functional/memory_control.hh"
#include "mem/functional/physical.hh"
#include "targetarch/vtophys.hh"
#include "sim/builder.hh"
#include "sim/system.hh"
#include "base/trace.hh"
using namespace std;
vector<System *> System::systemList;
int System::numSystemsRunning = 0;
System::System(Params *p)
: SimObject(p->name), memctrl(p->memctrl), physmem(p->physmem),
init_param(p->init_param), numcpus(0), params(p)
{
// add self to global system list
systemList.push_back(this);
kernelSymtab = new SymbolTable;
consoleSymtab = new SymbolTable;
palSymtab = new SymbolTable;
debugSymbolTable = new SymbolTable;
/**
* Load the kernel, pal, and console code into memory
*/
// Load kernel code
kernel = createObjectFile(params->kernel_path);
if (kernel == NULL)
fatal("Could not load kernel file %s", params->kernel_path);
// Load Console Code
console = createObjectFile(params->console_path);
if (console == NULL)
fatal("Could not load console file %s", params->console_path);
// Load pal file
pal = createObjectFile(params->palcode);
if (pal == NULL)
fatal("Could not load PALcode file %s", params->palcode);
// Load program sections into memory
pal->loadSections(physmem, true);
console->loadSections(physmem, true);
kernel->loadSections(physmem, true);
// setup entry points
kernelStart = kernel->textBase();
kernelEnd = kernel->bssBase() + kernel->bssSize();
kernelEntry = kernel->entryPoint();
// load symbols
if (!kernel->loadGlobalSymbols(kernelSymtab))
panic("could not load kernel symbols\n");
if (!kernel->loadLocalSymbols(kernelSymtab))
panic("could not load kernel local symbols\n");
if (!console->loadGlobalSymbols(consoleSymtab))
panic("could not load console symbols\n");
if (!pal->loadGlobalSymbols(palSymtab))
panic("could not load pal symbols\n");
if (!pal->loadLocalSymbols(palSymtab))
panic("could not load pal symbols\n");
if (!kernel->loadGlobalSymbols(debugSymbolTable))
panic("could not load kernel symbols\n");
if (!kernel->loadLocalSymbols(debugSymbolTable))
panic("could not load kernel local symbols\n");
if (!console->loadGlobalSymbols(debugSymbolTable))
panic("could not load console symbols\n");
if (!pal->loadGlobalSymbols(debugSymbolTable))
panic("could not load pal symbols\n");
if (!pal->loadLocalSymbols(debugSymbolTable))
panic("could not load pal symbols\n");
DPRINTF(Loader, "Kernel start = %#x\n", kernelStart);
DPRINTF(Loader, "Kernel end = %#x\n", kernelEnd);
DPRINTF(Loader, "Kernel entry = %#x\n", kernelEntry);
DPRINTF(Loader, "Kernel loaded...\n");
Addr addr = 0;
#ifdef DEBUG
consolePanicEvent = new BreakPCEvent(&pcEventQueue, "console panic");
if (consoleSymtab->findAddress("panic", addr))
consolePanicEvent->schedule(addr);
#endif
/**
* Copy the osflags (kernel arguments) into the consoles
* memory. (Presently Linux does not use the console service
* routine to get these command line arguments, but Tru64 and
* others do.)
*/
if (consoleSymtab->findAddress("env_booted_osflags", addr)) {
Addr paddr = vtophys(physmem, addr);
char *osflags = (char *)physmem->dma_addr(paddr, sizeof(uint32_t));
if (osflags)
strcpy(osflags, params->boot_osflags.c_str());
}
/**
* Set the hardware reset parameter block system type and revision
* information to Tsunami.
*/
if (consoleSymtab->findAddress("m5_rpb", addr)) {
Addr paddr = vtophys(physmem, addr);
char *hwrpb = (char *)physmem->dma_addr(paddr, sizeof(uint64_t));
if (!hwrpb)
panic("could not translate hwrpb addr\n");
*(uint64_t*)(hwrpb+0x50) = htoa(params->system_type);
*(uint64_t*)(hwrpb+0x58) = htoa(params->system_rev);
} else
panic("could not find hwrpb\n");
// increment the number of running systms
numSystemsRunning++;
kernelBinning = new Kernel::Binning(this);
}
System::~System()
{
delete kernelSymtab;
delete consoleSymtab;
delete kernel;
delete console;
delete pal;
delete kernelBinning;
#ifdef DEBUG
delete consolePanicEvent;
#endif
}
void
System::setAlphaAccess(Addr access)
{
Addr addr = 0;
if (consoleSymtab->findAddress("m5AlphaAccess", addr)) {
Addr paddr = vtophys(physmem, addr);
uint64_t *m5AlphaAccess =
(uint64_t *)physmem->dma_addr(paddr, sizeof(uint64_t));
if (!m5AlphaAccess)
panic("could not translate m5AlphaAccess addr\n");
*m5AlphaAccess = htoa(EV5::Phys2K0Seg(access));
} else
panic("could not find m5AlphaAccess\n");
}
bool
System::breakpoint()
{
return remoteGDB[0]->trap(ALPHA_KENTRY_INT);
}
int
System::registerExecContext(ExecContext *xc, int id)
{
if (id == -1) {
for (id = 0; id < execContexts.size(); id++) {
if (!execContexts[id])
break;
}
}
if (execContexts.size() <= id)
execContexts.resize(id + 1);
if (execContexts[id])
panic("Cannot have two CPUs with the same id (%d)\n", id);
execContexts[id] = xc;
numcpus++;
RemoteGDB *rgdb = new RemoteGDB(this, xc);
GDBListener *gdbl = new GDBListener(rgdb, 7000 + id);
gdbl->listen();
/**
* Uncommenting this line waits for a remote debugger to connect
* to the simulator before continuing.
*/
//gdbl->accept();
if (remoteGDB.size() <= id) {
remoteGDB.resize(id + 1);
}
remoteGDB[id] = rgdb;
return id;
}
void
System::startup()
{
if (!execContexts.empty()) {
// activate with zero delay so that we start ticking right
// away on cycle 0
execContexts[0]->activate(0);
}
}
void
System::replaceExecContext(ExecContext *xc, int id)
{
if (id >= execContexts.size()) {
panic("replaceExecContext: bad id, %d >= %d\n",
id, execContexts.size());
}
execContexts[id] = xc;
remoteGDB[id]->replaceExecContext(xc);
}
void
System::regStats()
{
kernelBinning->regStats(name() + ".kern");
}
void
System::serialize(ostream &os)
{
kernelBinning->serialize(os);
}
void
System::unserialize(Checkpoint *cp, const string &section)
{
kernelBinning->unserialize(cp, section);
}
void
System::printSystems()
{
vector<System *>::iterator i = systemList.begin();
vector<System *>::iterator end = systemList.end();
for (; i != end; ++i) {
System *sys = *i;
cerr << "System " << sys->name() << ": " << hex << sys << endl;
}
}
extern "C"
void
printSystems()
{
System::printSystems();
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(System)
Param<Tick> boot_cpu_frequency;
SimObjectParam<MemoryController *> memctrl;
SimObjectParam<PhysicalMemory *> physmem;
Param<string> kernel;
Param<string> console;
Param<string> pal;
Param<string> boot_osflags;
Param<string> readfile;
Param<unsigned int> init_param;
Param<uint64_t> system_type;
Param<uint64_t> system_rev;
Param<bool> bin;
VectorParam<string> binned_fns;
Param<bool> bin_int;
END_DECLARE_SIM_OBJECT_PARAMS(System)
BEGIN_INIT_SIM_OBJECT_PARAMS(System)
INIT_PARAM(boot_cpu_frequency, "Frequency of the boot CPU"),
INIT_PARAM(memctrl, "memory controller"),
INIT_PARAM(physmem, "phsyical memory"),
INIT_PARAM(kernel, "file that contains the kernel code"),
INIT_PARAM(console, "file that contains the console code"),
INIT_PARAM(pal, "file that contains palcode"),
INIT_PARAM_DFLT(boot_osflags, "flags to pass to the kernel during boot",
"a"),
INIT_PARAM_DFLT(readfile, "file to read startup script from", ""),
INIT_PARAM_DFLT(init_param, "numerical value to pass into simulator", 0),
INIT_PARAM_DFLT(system_type, "Type of system we are emulating", 34),
INIT_PARAM_DFLT(system_rev, "Revision of system we are emulating", 1<<10),
INIT_PARAM_DFLT(bin, "is this system to be binned", false),
INIT_PARAM(binned_fns, "functions to be broken down and binned"),
INIT_PARAM_DFLT(bin_int, "is interrupt code binned seperately?", true)
END_INIT_SIM_OBJECT_PARAMS(System)
CREATE_SIM_OBJECT(System)
{
System::Params *p = new System::Params;
p->name = getInstanceName();
p->boot_cpu_frequency = boot_cpu_frequency;
p->memctrl = memctrl;
p->physmem = physmem;
p->kernel_path = kernel;
p->console_path = console;
p->palcode = pal;
p->boot_osflags = boot_osflags;
p->init_param = init_param;
p->readfile = readfile;
p->system_type = system_type;
p->system_rev = system_rev;
p->bin = bin;
p->binned_fns = binned_fns;
p->bin_int = bin_int;
return new System(p);
}
REGISTER_SIM_OBJECT("System", System)