gem5/src/sim/clocked_object.cc
David Guillen Fandos 7cfb59d6e5 sim: Adding support for power models
This patch adds some basic support for power models in gem5.

The power interface is defined so it can interact with thermal
models as well. It implements a simple power evaluator that
can be used for simple power models that express power in the
form of a math expression. These expressions can use stats
within the same SimObject (or down its hierarchy) and some
magic variables such as "temp" for temperature.
In future patches we will extend this functionality to allow
slightly more complex expressions.

The model allows it to be extended to use other kinds of models.

Change-Id: I76752f9638b6815e229fd74cdcb7721a305cbc4b
2016-06-06 17:16:44 +01:00

191 lines
6.6 KiB
C++

/*
* Copyright (c) 2015-2016 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Akash Bagdia
* David Guillen Fandos
*/
#include "sim/clocked_object.hh"
#include "base/misc.hh"
#include "sim/power/power_model.hh"
ClockedObject::ClockedObject(const ClockedObjectParams *p) :
SimObject(p), Clocked(*p->clk_domain),
_currPwrState(p->default_p_state),
prvEvalTick(0)
{
// Register the power_model with the object
if (p->power_model)
p->power_model->setClockedObject(this);
}
void
ClockedObject::serialize(CheckpointOut &cp) const
{
unsigned int currPwrState = (unsigned int)_currPwrState;
SERIALIZE_SCALAR(currPwrState);
SERIALIZE_SCALAR(prvEvalTick);
}
void
ClockedObject::unserialize(CheckpointIn &cp)
{
unsigned int currPwrState;
UNSERIALIZE_SCALAR(currPwrState);
UNSERIALIZE_SCALAR(prvEvalTick);
_currPwrState = Enums::PwrState(currPwrState);
}
void
ClockedObject::pwrState(Enums::PwrState p)
{
// Function should ideally be called only when there is a state change
if (_currPwrState == p) {
warn("ClockedObject: Already in the requested power state, request "\
"ignored");
return;
}
// No need to compute stats if in the same tick, update state though. This
// can happen in cases like a) during start of the simulation multiple
// state changes happens in init/startup phase, b) one takes a decision to
// migrate state but decides to reverts back to the original state in the
// same tick if other conditions are not met elsewhere.
// Any state change related stats would have been recorded on previous call
// to the pwrState() function.
if (prvEvalTick == curTick()) {
warn("ClockedObject: More than one power state change request "\
"encountered within the same simulation tick");
_currPwrState = p;
return;
}
// Record stats for previous state.
computeStats();
_currPwrState = p;
numPwrStateTransitions++;
}
void
ClockedObject::computeStats()
{
// Calculate time elapsed from last (valid) state change
Tick elapsed_time = curTick() - prvEvalTick;
pwrStateResidencyTicks[_currPwrState] += elapsed_time;
// Time spent in CLK_GATED state, this might change depending on
// transition to other low power states in respective simulation
// objects.
if (_currPwrState == Enums::PwrState::CLK_GATED) {
pwrStateClkGateDist.sample(elapsed_time);
}
prvEvalTick = curTick();
}
std::vector<double>
ClockedObject::pwrStateWeights() const
{
// Get residency stats
std::vector<double> ret;
Stats::VCounter residencies;
pwrStateResidencyTicks.value(residencies);
// Account for current state too!
Tick elapsed_time = curTick() - prvEvalTick;
residencies[_currPwrState] += elapsed_time;
ret.resize(Enums::PwrState::Num_PwrState);
for (unsigned i = 0; i < Enums::PwrState::Num_PwrState; i++)
ret[i] = residencies[i] / \
(pwrStateResidencyTicks.total() + elapsed_time);
return ret;
}
void
ClockedObject::regStats()
{
SimObject::regStats();
using namespace Stats;
numPwrStateTransitions
.name(params()->name + ".numPwrStateTransitions")
.desc("Number of power state transitions")
.flags(nozero)
;
// Each sample is time in ticks
unsigned num_bins = std::max(params()->p_state_clk_gate_bins, 10U);
pwrStateClkGateDist
.init(params()->p_state_clk_gate_min, params()->p_state_clk_gate_max,
(params()->p_state_clk_gate_max / num_bins))
.name(params()->name + ".pwrStateClkGateDist")
.desc("Distribution of time spent in the clock gated state")
.flags(pdf | nozero | nonan)
;
pwrStateResidencyTicks
.init(Enums::PwrState::Num_PwrState)
.name(params()->name + ".pwrStateResidencyTicks")
.desc("Cumulative time (in ticks) in various power states")
.flags(nozero)
;
for (int i = 0; i < Enums::PwrState::Num_PwrState; i++) {
pwrStateResidencyTicks.subname(i, Enums::PwrStateStrings[i]);
}
numPwrStateTransitions = 0;
/**
* For every stats dump, the power state residency and other distribution
* stats should be computed just before the dump to ensure correct stats
* value being reported for current dump window. It avoids things like
* having any unreported time spent in a power state to be forwarded to the
* next dump window which might have rather unpleasant effects (like
* perturbing the distribution stats).
*/
registerDumpCallback(new ClockedObjectDumpCallback(this));
}