gem5/configs/example/se.py
Brandon Potter 3886c4a8f2 syscall_emul: [patch 5/22] remove LiveProcess class and use Process instead
The EIOProcess class was removed recently and it was the only other class
which derived from Process. Since every Process invocation is also a
LiveProcess invocation, it makes sense to simplify the organization by
combining the fields from LiveProcess into Process.
2016-11-09 14:27:40 -06:00

287 lines
9.9 KiB
Python

# Copyright (c) 2012-2013 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2008 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Steve Reinhardt
# Simple test script
#
# "m5 test.py"
import optparse
import sys
import os
import m5
from m5.defines import buildEnv
from m5.objects import *
from m5.util import addToPath, fatal
addToPath('../')
from ruby import Ruby
from common import Options
from common import Simulation
from common import CacheConfig
from common import CpuConfig
from common import MemConfig
from common.Caches import *
from common.cpu2000 import *
# Check if KVM support has been enabled, we might need to do VM
# configuration if that's the case.
have_kvm_support = 'BaseKvmCPU' in globals()
def is_kvm_cpu(cpu_class):
return have_kvm_support and cpu_class != None and \
issubclass(cpu_class, BaseKvmCPU)
def get_processes(options):
"""Interprets provided options and returns a list of processes"""
multiprocesses = []
inputs = []
outputs = []
errouts = []
pargs = []
workloads = options.cmd.split(';')
if options.input != "":
inputs = options.input.split(';')
if options.output != "":
outputs = options.output.split(';')
if options.errout != "":
errouts = options.errout.split(';')
if options.options != "":
pargs = options.options.split(';')
idx = 0
for wrkld in workloads:
process = Process()
process.executable = wrkld
process.cwd = os.getcwd()
if options.env:
with open(options.env, 'r') as f:
process.env = [line.rstrip() for line in f]
if len(pargs) > idx:
process.cmd = [wrkld] + pargs[idx].split()
else:
process.cmd = [wrkld]
if len(inputs) > idx:
process.input = inputs[idx]
if len(outputs) > idx:
process.output = outputs[idx]
if len(errouts) > idx:
process.errout = errouts[idx]
multiprocesses.append(process)
idx += 1
if options.smt:
assert(options.cpu_type == "detailed")
return multiprocesses, idx
else:
return multiprocesses, 1
parser = optparse.OptionParser()
Options.addCommonOptions(parser)
Options.addSEOptions(parser)
if '--ruby' in sys.argv:
Ruby.define_options(parser)
(options, args) = parser.parse_args()
if args:
print "Error: script doesn't take any positional arguments"
sys.exit(1)
multiprocesses = []
numThreads = 1
if options.bench:
apps = options.bench.split("-")
if len(apps) != options.num_cpus:
print "number of benchmarks not equal to set num_cpus!"
sys.exit(1)
for app in apps:
try:
if buildEnv['TARGET_ISA'] == 'alpha':
exec("workload = %s('alpha', 'tru64', '%s')" % (
app, options.spec_input))
elif buildEnv['TARGET_ISA'] == 'arm':
exec("workload = %s('arm_%s', 'linux', '%s')" % (
app, options.arm_iset, options.spec_input))
else:
exec("workload = %s(buildEnv['TARGET_ISA', 'linux', '%s')" % (
app, options.spec_input))
multiprocesses.append(workload.makeProcess())
except:
print >>sys.stderr, "Unable to find workload for %s: %s" % (
buildEnv['TARGET_ISA'], app)
sys.exit(1)
elif options.cmd:
multiprocesses, numThreads = get_processes(options)
else:
print >> sys.stderr, "No workload specified. Exiting!\n"
sys.exit(1)
(CPUClass, test_mem_mode, FutureClass) = Simulation.setCPUClass(options)
CPUClass.numThreads = numThreads
# Check -- do not allow SMT with multiple CPUs
if options.smt and options.num_cpus > 1:
fatal("You cannot use SMT with multiple CPUs!")
np = options.num_cpus
system = System(cpu = [CPUClass(cpu_id=i) for i in xrange(np)],
mem_mode = test_mem_mode,
mem_ranges = [AddrRange(options.mem_size)],
cache_line_size = options.cacheline_size)
if numThreads > 1:
system.multi_thread = True
# Create a top-level voltage domain
system.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
# Create a source clock for the system and set the clock period
system.clk_domain = SrcClockDomain(clock = options.sys_clock,
voltage_domain = system.voltage_domain)
# Create a CPU voltage domain
system.cpu_voltage_domain = VoltageDomain()
# Create a separate clock domain for the CPUs
system.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
voltage_domain =
system.cpu_voltage_domain)
# If elastic tracing is enabled, then configure the cpu and attach the elastic
# trace probe
if options.elastic_trace_en:
CpuConfig.config_etrace(CPUClass, system.cpu, options)
# All cpus belong to a common cpu_clk_domain, therefore running at a common
# frequency.
for cpu in system.cpu:
cpu.clk_domain = system.cpu_clk_domain
if is_kvm_cpu(CPUClass) or is_kvm_cpu(FutureClass):
if buildEnv['TARGET_ISA'] == 'x86':
system.kvm_vm = KvmVM()
for process in multiprocesses:
process.useArchPT = True
process.kvmInSE = True
else:
fatal("KvmCPU can only be used in SE mode with x86")
# Sanity check
if options.fastmem:
if CPUClass != AtomicSimpleCPU:
fatal("Fastmem can only be used with atomic CPU!")
if (options.caches or options.l2cache):
fatal("You cannot use fastmem in combination with caches!")
if options.simpoint_profile:
if not options.fastmem:
# Atomic CPU checked with fastmem option already
fatal("SimPoint generation should be done with atomic cpu and fastmem")
if np > 1:
fatal("SimPoint generation not supported with more than one CPUs")
for i in xrange(np):
if options.smt:
system.cpu[i].workload = multiprocesses
elif len(multiprocesses) == 1:
system.cpu[i].workload = multiprocesses[0]
else:
system.cpu[i].workload = multiprocesses[i]
if options.fastmem:
system.cpu[i].fastmem = True
if options.simpoint_profile:
system.cpu[i].addSimPointProbe(options.simpoint_interval)
if options.checker:
system.cpu[i].addCheckerCpu()
system.cpu[i].createThreads()
if options.ruby:
if options.cpu_type == "atomic" or options.cpu_type == "AtomicSimpleCPU":
print >> sys.stderr, "Ruby does not work with atomic cpu!!"
sys.exit(1)
Ruby.create_system(options, False, system)
assert(options.num_cpus == len(system.ruby._cpu_ports))
system.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
voltage_domain = system.voltage_domain)
for i in xrange(np):
ruby_port = system.ruby._cpu_ports[i]
# Create the interrupt controller and connect its ports to Ruby
# Note that the interrupt controller is always present but only
# in x86 does it have message ports that need to be connected
system.cpu[i].createInterruptController()
# Connect the cpu's cache ports to Ruby
system.cpu[i].icache_port = ruby_port.slave
system.cpu[i].dcache_port = ruby_port.slave
if buildEnv['TARGET_ISA'] == 'x86':
system.cpu[i].interrupts[0].pio = ruby_port.master
system.cpu[i].interrupts[0].int_master = ruby_port.slave
system.cpu[i].interrupts[0].int_slave = ruby_port.master
system.cpu[i].itb.walker.port = ruby_port.slave
system.cpu[i].dtb.walker.port = ruby_port.slave
else:
MemClass = Simulation.setMemClass(options)
system.membus = SystemXBar()
system.system_port = system.membus.slave
CacheConfig.config_cache(options, system)
MemConfig.config_mem(options, system)
root = Root(full_system = False, system = system)
Simulation.run(options, root, system, FutureClass)