6807c319b0
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
577 lines
18 KiB
C++
577 lines
18 KiB
C++
/*
|
|
* Copyright (c) 2003 The Regents of The University of Michigan
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met: redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer;
|
|
* redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution;
|
|
* neither the name of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <cstddef>
|
|
#include <cstdlib>
|
|
#include <string>
|
|
#include <vector>
|
|
|
|
#include "base/trace.hh"
|
|
#include "cpu/intr_control.hh"
|
|
#include "dev/dma.hh"
|
|
#include "dev/pcireg.h"
|
|
#include "dev/pciconfigall.hh"
|
|
#include "dev/ide_disk.hh"
|
|
#include "dev/ide_ctrl.hh"
|
|
#include "dev/tsunami_cchip.hh"
|
|
#include "mem/bus/bus.hh"
|
|
#include "mem/bus/pio_interface.hh"
|
|
#include "mem/bus/pio_interface_impl.hh"
|
|
#include "mem/bus/dma_interface.hh"
|
|
#include "dev/tsunami.hh"
|
|
#include "mem/functional_mem/memory_control.hh"
|
|
#include "mem/functional_mem/physical_memory.hh"
|
|
#include "sim/builder.hh"
|
|
#include "sim/sim_object.hh"
|
|
|
|
using namespace std;
|
|
|
|
////
|
|
// Initialization and destruction
|
|
////
|
|
|
|
IdeController::IdeController(const string &name, IntrControl *ic,
|
|
const vector<IdeDisk *> &new_disks,
|
|
MemoryController *mmu, PciConfigAll *cf,
|
|
PciConfigData *cd, Tsunami *t, uint32_t bus_num,
|
|
uint32_t dev_num, uint32_t func_num,
|
|
Bus *host_bus, HierParams *hier)
|
|
: PciDev(name, mmu, cf, cd, bus_num, dev_num, func_num), tsunami(t)
|
|
{
|
|
// put back pointer into Tsunami
|
|
tsunami->disk_controller = this;
|
|
|
|
// initialize the PIO interface addresses
|
|
pri_cmd_addr = 0;
|
|
pri_cmd_size = BARSize[0];
|
|
|
|
pri_ctrl_addr = 0;
|
|
pri_ctrl_size = BARSize[1];
|
|
|
|
sec_cmd_addr = 0;
|
|
sec_cmd_size = BARSize[2];
|
|
|
|
sec_ctrl_addr = 0;
|
|
sec_ctrl_size = BARSize[3];
|
|
|
|
// initialize the bus master interface (BMI) address to be configured
|
|
// via PCI
|
|
bmi_addr = 0;
|
|
bmi_size = BARSize[4];
|
|
|
|
// zero out all of the registers
|
|
memset(bmi_regs, 0, sizeof(bmi_regs));
|
|
memset(pci_regs, 0, sizeof(pci_regs));
|
|
|
|
// setup initial values
|
|
*(uint32_t *)&pci_regs[IDETIM] = 0x80008000; // enable both channels
|
|
*(uint8_t *)&bmi_regs[BMIS0] = 0x60;
|
|
*(uint8_t *)&bmi_regs[BMIS1] = 0x60;
|
|
|
|
// reset all internal variables
|
|
io_enabled = false;
|
|
bm_enabled = false;
|
|
memset(cmd_in_progress, 0, sizeof(cmd_in_progress));
|
|
|
|
// create the PIO and DMA interfaces
|
|
if (host_bus) {
|
|
pioInterface = newPioInterface(name, hier, host_bus, this,
|
|
&IdeController::cacheAccess);
|
|
|
|
dmaInterface = new DMAInterface<Bus>(name + ".dma", host_bus,
|
|
host_bus, 1);
|
|
}
|
|
|
|
// setup the disks attached to controller
|
|
memset(disks, 0, sizeof(IdeDisk *) * 4);
|
|
|
|
if (new_disks.size() > 3)
|
|
panic("IDE controllers support a maximum of 4 devices attached!\n");
|
|
|
|
for (int i = 0; i < new_disks.size(); i++) {
|
|
disks[i] = new_disks[i];
|
|
disks[i]->setController(this, dmaInterface);
|
|
}
|
|
}
|
|
|
|
IdeController::~IdeController()
|
|
{
|
|
for (int i = 0; i < 4; i++)
|
|
if (disks[i])
|
|
delete disks[i];
|
|
}
|
|
|
|
////
|
|
// Command completion
|
|
////
|
|
|
|
void
|
|
IdeController::setDmaComplete(IdeDisk *disk)
|
|
{
|
|
int diskNum = getDisk(disk);
|
|
|
|
if (diskNum < 0)
|
|
panic("Unable to find disk based on pointer %#x\n", disk);
|
|
|
|
if (diskNum < 2) {
|
|
// clear the start/stop bit in the command register
|
|
bmi_regs[BMIC0] &= ~SSBM;
|
|
// clear the bus master active bit in the status register
|
|
bmi_regs[BMIS0] &= ~BMIDEA;
|
|
// set the interrupt bit
|
|
bmi_regs[BMIS0] |= IDEINTS;
|
|
} else {
|
|
// clear the start/stop bit in the command register
|
|
bmi_regs[BMIC1] &= ~SSBM;
|
|
// clear the bus master active bit in the status register
|
|
bmi_regs[BMIS1] &= ~BMIDEA;
|
|
// set the interrupt bit
|
|
bmi_regs[BMIS1] |= IDEINTS;
|
|
}
|
|
}
|
|
|
|
////
|
|
// Interrupt handling
|
|
////
|
|
|
|
void
|
|
IdeController::intrPost()
|
|
{
|
|
tsunami->cchip->postDRIR(configData->config.hdr.pci0.interruptLine);
|
|
}
|
|
|
|
void
|
|
IdeController::intrClear()
|
|
{
|
|
tsunami->cchip->clearDRIR(configData->config.hdr.pci0.interruptLine);
|
|
}
|
|
|
|
////
|
|
// Bus timing and bus access functions
|
|
////
|
|
|
|
Tick
|
|
IdeController::cacheAccess(MemReqPtr &req)
|
|
{
|
|
// @todo Add more accurate timing to cache access
|
|
return curTick + 1000;
|
|
}
|
|
|
|
////
|
|
// Read and write handling
|
|
////
|
|
|
|
void
|
|
IdeController::ReadConfig(int offset, int size, uint8_t *data)
|
|
{
|
|
Addr origOffset = offset;
|
|
|
|
if (offset < PCI_DEVICE_SPECIFIC) {
|
|
PciDev::ReadConfig(offset, size, data);
|
|
} else {
|
|
if (offset >= PCI_IDE_TIMING && offset < (PCI_IDE_TIMING + 4)) {
|
|
offset -= PCI_IDE_TIMING;
|
|
offset += IDETIM;
|
|
|
|
if ((offset + size) > (IDETIM + 4))
|
|
panic("PCI read of IDETIM with invalid size\n");
|
|
} else if (offset == PCI_SLAVE_TIMING) {
|
|
offset -= PCI_SLAVE_TIMING;
|
|
offset += SIDETIM;
|
|
|
|
if ((offset + size) > (SIDETIM + 1))
|
|
panic("PCI read of SIDETIM with invalid size\n");
|
|
} else if (offset == PCI_UDMA33_CTRL) {
|
|
offset -= PCI_UDMA33_CTRL;
|
|
offset += UDMACTL;
|
|
|
|
if ((offset + size) > (UDMACTL + 1))
|
|
panic("PCI read of UDMACTL with invalid size\n");
|
|
} else if (offset >= PCI_UDMA33_TIMING &&
|
|
offset < (PCI_UDMA33_TIMING + 2)) {
|
|
offset -= PCI_UDMA33_TIMING;
|
|
offset += UDMATIM;
|
|
|
|
if ((offset + size) > (UDMATIM + 2))
|
|
panic("PCI read of UDMATIM with invalid size\n");
|
|
} else {
|
|
panic("PCI read of unimplemented register: %x\n", offset);
|
|
}
|
|
|
|
memcpy((void *)data, (void *)&pci_regs[offset], size);
|
|
}
|
|
|
|
DPRINTF(IdeCtrl, "IDE PCI read offset: %#x (%#x) size: %#x data: %#x\n",
|
|
origOffset, offset, size, *(uint32_t *)data);
|
|
}
|
|
|
|
void
|
|
IdeController::WriteConfig(int offset, int size, uint32_t data)
|
|
{
|
|
DPRINTF(IdeCtrl, "IDE PCI write offset: %#x size: %#x data: %#x\n",
|
|
offset, size, data);
|
|
|
|
// do standard write stuff if in standard PCI space
|
|
if (offset < PCI_DEVICE_SPECIFIC) {
|
|
PciDev::WriteConfig(offset, size, data);
|
|
} else {
|
|
if (offset >= PCI_IDE_TIMING && offset < (PCI_IDE_TIMING + 4)) {
|
|
offset -= PCI_IDE_TIMING;
|
|
offset += IDETIM;
|
|
|
|
if ((offset + size) > (IDETIM + 4))
|
|
panic("PCI write to IDETIM with invalid size\n");
|
|
} else if (offset == PCI_SLAVE_TIMING) {
|
|
offset -= PCI_SLAVE_TIMING;
|
|
offset += SIDETIM;
|
|
|
|
if ((offset + size) > (SIDETIM + 1))
|
|
panic("PCI write to SIDETIM with invalid size\n");
|
|
} else if (offset == PCI_UDMA33_CTRL) {
|
|
offset -= PCI_UDMA33_CTRL;
|
|
offset += UDMACTL;
|
|
|
|
if ((offset + size) > (UDMACTL + 1))
|
|
panic("PCI write to UDMACTL with invalid size\n");
|
|
} else if (offset >= PCI_UDMA33_TIMING &&
|
|
offset < (PCI_UDMA33_TIMING + 2)) {
|
|
offset -= PCI_UDMA33_TIMING;
|
|
offset += UDMATIM;
|
|
|
|
if ((offset + size) > (UDMATIM + 2))
|
|
panic("PCI write to UDMATIM with invalid size\n");
|
|
} else {
|
|
panic("PCI write to unimplemented register: %x\n", offset);
|
|
}
|
|
|
|
memcpy((void *)&pci_regs[offset], (void *)&data, size);
|
|
}
|
|
|
|
if (offset == PCI_COMMAND) {
|
|
if (config.data[offset] & IOSE)
|
|
io_enabled = true;
|
|
else
|
|
io_enabled = false;
|
|
|
|
if (config.data[offset] & BME)
|
|
bm_enabled = true;
|
|
else
|
|
bm_enabled = false;
|
|
|
|
} else if (data != 0xffffffff) {
|
|
switch (offset) {
|
|
case PCI0_BASE_ADDR0:
|
|
pri_cmd_addr = BARAddrs[0];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(pri_cmd_addr,
|
|
pri_cmd_addr + pri_cmd_size - 1);
|
|
|
|
pri_cmd_addr = ((pri_cmd_addr | 0xf0000000000) & PA_IMPL_MASK);
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR1:
|
|
pri_ctrl_addr = BARAddrs[1];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(pri_ctrl_addr,
|
|
pri_ctrl_addr + pri_ctrl_size - 1);
|
|
|
|
pri_ctrl_addr = ((pri_ctrl_addr | 0xf0000000000) & PA_IMPL_MASK);
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR2:
|
|
sec_cmd_addr = BARAddrs[2];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(sec_cmd_addr,
|
|
sec_cmd_addr + sec_cmd_size - 1);
|
|
|
|
sec_cmd_addr = ((sec_cmd_addr | 0xf0000000000) & PA_IMPL_MASK);
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR3:
|
|
sec_ctrl_addr = BARAddrs[3];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(sec_ctrl_addr,
|
|
sec_ctrl_addr + sec_ctrl_size - 1);
|
|
|
|
sec_ctrl_addr = ((sec_ctrl_addr | 0xf0000000000) & PA_IMPL_MASK);
|
|
break;
|
|
|
|
case PCI0_BASE_ADDR4:
|
|
bmi_addr = BARAddrs[4];
|
|
if (pioInterface)
|
|
pioInterface->addAddrRange(bmi_addr, bmi_addr + bmi_size - 1);
|
|
|
|
bmi_addr = ((bmi_addr | 0xf0000000000) & PA_IMPL_MASK);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
Fault
|
|
IdeController::read(MemReqPtr &req, uint8_t *data)
|
|
{
|
|
Addr offset;
|
|
bool primary;
|
|
bool byte;
|
|
bool cmdBlk;
|
|
RegType_t type;
|
|
int disk;
|
|
|
|
parseAddr(req->paddr, offset, primary, type);
|
|
byte = (req->size == sizeof(uint8_t)) ? true : false;
|
|
cmdBlk = (type == COMMAND_BLOCK) ? true : false;
|
|
|
|
if (!io_enabled)
|
|
return No_Fault;
|
|
|
|
// sanity check the size (allows byte, word, or dword access)
|
|
if (req->size != sizeof(uint8_t) && req->size != sizeof(uint16_t) &&
|
|
req->size != sizeof(uint32_t))
|
|
panic("IDE controller read of invalid size: %#x\n", req->size);
|
|
|
|
if (type != BMI_BLOCK) {
|
|
assert(req->size != sizeof(uint32_t));
|
|
|
|
disk = getDisk(primary);
|
|
if (disks[disk])
|
|
disks[disk]->read(offset, byte, cmdBlk, data);
|
|
} else {
|
|
memcpy((void *)data, &bmi_regs[offset], req->size);
|
|
}
|
|
|
|
DPRINTF(IdeCtrl, "IDE read from offset: %#x size: %#x data: %#x\n",
|
|
offset, req->size, *(uint32_t *)data);
|
|
|
|
return No_Fault;
|
|
}
|
|
|
|
Fault
|
|
IdeController::write(MemReqPtr &req, const uint8_t *data)
|
|
{
|
|
Addr offset;
|
|
bool primary;
|
|
bool byte;
|
|
bool cmdBlk;
|
|
RegType_t type;
|
|
int disk;
|
|
|
|
parseAddr(req->paddr, offset, primary, type);
|
|
byte = (req->size == sizeof(uint8_t)) ? true : false;
|
|
cmdBlk = (type == COMMAND_BLOCK) ? true : false;
|
|
|
|
DPRINTF(IdeCtrl, "IDE write from offset: %#x size: %#x data: %#x\n",
|
|
offset, req->size, *(uint32_t *)data);
|
|
|
|
uint8_t oldVal, newVal;
|
|
|
|
if (!io_enabled)
|
|
return No_Fault;
|
|
|
|
if (type == BMI_BLOCK && !bm_enabled)
|
|
return No_Fault;
|
|
|
|
if (type != BMI_BLOCK) {
|
|
// shadow the dev bit
|
|
if (type == COMMAND_BLOCK && offset == IDE_SELECT_OFFSET) {
|
|
uint8_t *devBit = (primary ? &dev[0] : &dev[1]);
|
|
*devBit = ((*data & IDE_SELECT_DEV_BIT) ? 1 : 0);
|
|
}
|
|
|
|
assert(req->size != sizeof(uint32_t));
|
|
|
|
disk = getDisk(primary);
|
|
if (disks[disk])
|
|
disks[disk]->write(offset, byte, cmdBlk, data);
|
|
} else {
|
|
switch (offset) {
|
|
// Bus master IDE command register
|
|
case BMIC1:
|
|
case BMIC0:
|
|
if (req->size != sizeof(uint8_t))
|
|
panic("Invalid BMIC write size: %x\n", req->size);
|
|
|
|
// select the current disk based on DEV bit
|
|
disk = getDisk(primary);
|
|
|
|
oldVal = bmi_regs[offset];
|
|
newVal = *data;
|
|
|
|
// if a DMA transfer is in progress, R/W control cannot change
|
|
if (oldVal & SSBM) {
|
|
if ((oldVal & RWCON) ^ (newVal & RWCON)) {
|
|
(oldVal & RWCON) ? newVal |= RWCON : newVal &= ~RWCON;
|
|
}
|
|
}
|
|
|
|
// see if the start/stop bit is being changed
|
|
if ((oldVal & SSBM) ^ (newVal & SSBM)) {
|
|
if (oldVal & SSBM) {
|
|
// stopping DMA transfer
|
|
DPRINTF(IdeCtrl, "Stopping DMA transfer\n");
|
|
|
|
// clear the BMIDEA bit
|
|
bmi_regs[offset + 0x2] &= ~BMIDEA;
|
|
|
|
if (disks[disk] == NULL)
|
|
panic("DMA stop for disk %d which does not exist\n",
|
|
disk);
|
|
|
|
// inform the disk of the DMA transfer abort
|
|
disks[disk]->abortDma();
|
|
} else {
|
|
// starting DMA transfer
|
|
DPRINTF(IdeCtrl, "Starting DMA transfer\n");
|
|
|
|
// set the BMIDEA bit
|
|
bmi_regs[offset + 0x2] |= BMIDEA;
|
|
|
|
if (disks[disk] == NULL)
|
|
panic("DMA start for disk %d which does not exist\n",
|
|
disk);
|
|
|
|
// inform the disk of the DMA transfer start
|
|
if (primary)
|
|
disks[disk]->startDma(*(uint32_t *)&bmi_regs[BMIDTP0]);
|
|
else
|
|
disks[disk]->startDma(*(uint32_t *)&bmi_regs[BMIDTP1]);
|
|
}
|
|
}
|
|
|
|
// update the register value
|
|
bmi_regs[offset] = newVal;
|
|
break;
|
|
|
|
// Bus master IDE status register
|
|
case BMIS0:
|
|
case BMIS1:
|
|
if (req->size != sizeof(uint8_t))
|
|
panic("Invalid BMIS write size: %x\n", req->size);
|
|
|
|
oldVal = bmi_regs[offset];
|
|
newVal = *data;
|
|
|
|
// the BMIDEA bit is RO
|
|
newVal |= (oldVal & BMIDEA);
|
|
|
|
// to reset (set 0) IDEINTS and IDEDMAE, write 1 to each
|
|
if ((oldVal & IDEINTS) && (newVal & IDEINTS))
|
|
newVal &= ~IDEINTS; // clear the interrupt?
|
|
else
|
|
(oldVal & IDEINTS) ? newVal |= IDEINTS : newVal &= ~IDEINTS;
|
|
|
|
if ((oldVal & IDEDMAE) && (newVal & IDEDMAE))
|
|
newVal &= ~IDEDMAE;
|
|
else
|
|
(oldVal & IDEDMAE) ? newVal |= IDEDMAE : newVal &= ~IDEDMAE;
|
|
|
|
bmi_regs[offset] = newVal;
|
|
break;
|
|
|
|
// Bus master IDE descriptor table pointer register
|
|
case BMIDTP0:
|
|
case BMIDTP1:
|
|
if (req->size != sizeof(uint32_t))
|
|
panic("Invalid BMIDTP write size: %x\n", req->size);
|
|
|
|
*(uint32_t *)&bmi_regs[offset] = *(uint32_t *)data & ~0x3;
|
|
break;
|
|
|
|
default:
|
|
if (req->size != sizeof(uint8_t) &&
|
|
req->size != sizeof(uint16_t) &&
|
|
req->size != sizeof(uint32_t))
|
|
panic("IDE controller write of invalid write size: %x\n",
|
|
req->size);
|
|
|
|
// do a default copy of data into the registers
|
|
memcpy((void *)&bmi_regs[offset], data, req->size);
|
|
}
|
|
}
|
|
|
|
return No_Fault;
|
|
}
|
|
|
|
////
|
|
// Serialization
|
|
////
|
|
|
|
void
|
|
IdeController::serialize(std::ostream &os)
|
|
{
|
|
}
|
|
|
|
void
|
|
IdeController::unserialize(Checkpoint *cp, const std::string §ion)
|
|
{
|
|
}
|
|
|
|
#ifndef DOXYGEN_SHOULD_SKIP_THIS
|
|
|
|
BEGIN_DECLARE_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
SimObjectParam<IntrControl *> intr_ctrl;
|
|
SimObjectVectorParam<IdeDisk *> disks;
|
|
SimObjectParam<MemoryController *> mmu;
|
|
SimObjectParam<PciConfigAll *> configspace;
|
|
SimObjectParam<PciConfigData *> configdata;
|
|
SimObjectParam<Tsunami *> tsunami;
|
|
Param<uint32_t> pci_bus;
|
|
Param<uint32_t> pci_dev;
|
|
Param<uint32_t> pci_func;
|
|
SimObjectParam<Bus *> host_bus;
|
|
SimObjectParam<HierParams *> hier;
|
|
|
|
END_DECLARE_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
BEGIN_INIT_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
INIT_PARAM(intr_ctrl, "Interrupt Controller"),
|
|
INIT_PARAM(disks, "IDE disks attached to this controller"),
|
|
INIT_PARAM(mmu, "Memory controller"),
|
|
INIT_PARAM(configspace, "PCI Configspace"),
|
|
INIT_PARAM(configdata, "PCI Config data"),
|
|
INIT_PARAM(tsunami, "Tsunami chipset pointer"),
|
|
INIT_PARAM(pci_bus, "PCI bus ID"),
|
|
INIT_PARAM(pci_dev, "PCI device number"),
|
|
INIT_PARAM(pci_func, "PCI function code"),
|
|
INIT_PARAM_DFLT(host_bus, "Host bus to attach to", NULL),
|
|
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)
|
|
|
|
END_INIT_SIM_OBJECT_PARAMS(IdeController)
|
|
|
|
CREATE_SIM_OBJECT(IdeController)
|
|
{
|
|
return new IdeController(getInstanceName(), intr_ctrl, disks, mmu,
|
|
configspace, configdata, tsunami, pci_bus,
|
|
pci_dev, pci_func, host_bus, hier);
|
|
}
|
|
|
|
REGISTER_SIM_OBJECT("IdeController", IdeController)
|
|
|
|
#endif //DOXYGEN_SHOULD_SKIP_THIS
|