5fb00e1df6
This changeset adds a set of tests that stress the CPU switching code. It adds the following test configurations: * tsunami-switcheroo-full -- Alpha system (atomic, timing, O3) * realview-switcheroo-atomic -- ARM system (atomic<->atomic) * realview-switcheroo-timing -- ARM system (timing<->timing) * realview-switcheroo-o3 -- ARM system (O3<->O3) * realview-switcheroo-full -- ARM system (atomic, timing, O3) Reference data is provided for the 10.linux-boot test case. All of the tests trigger a CPU switch once per millisecond during the boot process. The in-order CPU model was not included in any of the tests as it does not support CPU handover.
96 lines
5.7 KiB
Text
96 lines
5.7 KiB
Text
[ 0.000000] Linux version 2.6.38.8-gem5 (saidi@zeep) (gcc version 4.5.2 (Sourcery G++ Lite 2011.03-41) ) #1 SMP Mon Aug 15 21:18:38 EDT 2011
|
||
|
||
[ 0.000000] CPU: ARMv7 Processor [350fc000] revision 0 (ARMv7), cr=10c53c7f
|
||
|
||
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
|
||
|
||
[ 0.000000] Machine: ARM-RealView PBX
|
||
|
||
[ 0.000000] Ignoring unrecognised tag 0x00000000
|
||
|
||
[ 0.000000] bootconsole [earlycon0] enabled
|
||
|
||
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
|
||
|
||
[ 0.000000] On node 0 totalpages: 32768
|
||
|
||
[ 0.000000] DMA zone: 256 pages used for memmap
|
||
|
||
[ 0.000000] DMA zone: 0 pages reserved
|
||
|
||
[ 0.000000] DMA zone: 32512 pages, LIFO batch:7
|
||
|
||
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0556000 s6272 r8192 d14208 u32768
|
||
|
||
[ 0.000000] pcpu-alloc: s6272 r8192 d14208 u32768 alloc=8*4096
|
||
|
||
[ 0.000000] pcpu-alloc: [0] 0
|
||
|
||
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
|
||
|
||
[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 lpj=19988480 norandmaps rw loglevel=8 mem=128MB root=/dev/sda1
|
||
|
||
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
|
||
|
||
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
|
||
|
||
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
|
||
|
||
[ 0.000000] Memory: 128MB = 128MB total
|
||
|
||
[ 0.000000] Memory: 125408k/125408k available, 5664k reserved, 0K highmem
|
||
|
||
[ 0.000000] Virtual kernel memory layout:
|
||
|
||
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
||
|
||
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
|
||
|
||
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
|
||
|
||
[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
|
||
|
||
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
|
||
|
||
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
|
||
|
||
[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
|
||
|
||
[ 0.000000] .text : 0xc0029000 - 0xc031c044 (3021 kB)
|
||
|
||
[ 0.000000] .data : 0xc031e000 - 0xc0336b40 ( 99 kB)
|
||
|
||
[ 0.000000] Hierarchical RCU implementation.
|
||
|
||
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
|
||
|
||
[ 0.000000] NR_IRQS:128
|
||
|
||
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
|
||
|
||
[ 0.000000] Console: colour dummy device 80x30
|
||
|
||
[ 0.000051] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
|
||
|
||
[ 0.000059] pid_max: default: 32768 minimum: 301
|
||
|
||
[ 0.000116] Mount-cache hash table entries: 512
|
||
|
||
[ 0.000218] CPU: Testing write buffer coherency: ok
|
||
|
||
[ 0.000283] Brought up 1 CPUs
|
||
|
||
[ 0.000287] SMP: Total of 1 processors activated (3997.69 BogoMIPS).
|
||
|
||
[ 0.000332] devtmpfs: initialized
|
||
|
||
[ 0.000872] NET: Registered protocol family 16
|
||
|
||
[ 0.001228] Serial: AMBA PL011 UART driver
|
||
|
||
[ 0.001242] dev:uart0: ttyAMA0 at MMIO 0x10009000 (irq = 44) is a PL011 rev3
|
||
|
||
[ 0.001248] console [ttyAMA0] enabled, bootconsole disabled
|
||
[ 0.001248] console [ttyAMA0] enabled, bootconsole disabled
|
||
|
||
[ 0.002604] bio: create slab <bio-0> at 0
|
||
[ 0.002813] SCSI subsystem initialized
|
||
[ 0.002881] libata version 3.00 loaded.
|
||
[ 0.003052] Switching to clocksource timer3
|
||
[ 0.005417] NET: Registered protocol family 2
|
||
[ 0.005446] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
|
||
[ 0.005513] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
|
||
[ 0.005542] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
|
||
[ 0.005570] TCP: Hash tables configured (established 4096 bind 4096)
|
||
[ 0.005574] TCP reno registered
|
||
[ 0.005577] UDP hash table entries: 128 (order: 0, 4096 bytes)
|
||
[ 0.005587] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
|
||
[ 0.005653] NET: Registered protocol family 1
|
||
[ 0.005968] msgmni has been set to 244
|
||
[ 0.005977] io scheduler noop registered (default)
|
||
[ 0.006441] CLCD: RealView hardware, XVGA display
|
||
[ 0.032955] Console: switching to colour frame buffer device 128x48
|
||
[ 0.038422] brd: module loaded
|
||
[ 0.039324] loop: module loaded
|
||
[ 0.039644] scsi0 : pata_platform
|
||
[ 0.039722] ata1: PATA max PIO0 no IRQ, using PIO polling mmio cmd 0x18000000 ctl 0x18000100
|
||
[ 0.039946] slram: not enough parameters.
|
||
[ 0.040131] mousedev: PS/2 mouse device common for all mice
|
||
[ 0.040221] TCP cubic registered
|
||
[ 0.040223] NET: Registered protocol family 17
|
||
[ 0.040228] VFP support v0.3: implementor 41 architecture 4 part 30 variant a rev 0
|
||
[ 0.190100] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
|
||
[ 0.190104] ata1.00: 1048320 sectors, multi 0: LBA
|
||
[ 0.190110] ata1.00: configured for PIO
|
||
[ 0.190165] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
|
||
[ 0.190315] sd 0:0:0:0: [sda] 1048320 512-byte logical blocks: (536 MB/511 MiB)
|
||
[ 0.190357] sd 0:0:0:0: [sda] Write Protect is off
|
||
[ 0.190362] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
|
||
[ 0.190382] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
|
||
[ 0.190738] sda: sda1
|
||
[ 0.190789] sd 0:0:0:0: Attached scsi generic sg0 type 0
|
||
[ 0.190928] sd 0:0:0:0: [sda] Attached SCSI disk
|
||
[ 0.640109] input: AT Raw Set 2 keyboard as /devices/fpga:kmi0/serio0/input/input0
|
||
[ 2.240093] input: touchkitPS/2 eGalax Touchscreen as /devices/fpga:kmi1/serio1/input/input1
|
||
[ 2.260514] VFS: Mounted root (ext2 filesystem) on device 8:1.
|
||
[ 2.260711] devtmpfs: mounted
|
||
[ 2.260723] Freeing init memory: 132K
|
||
|
||
init started: BusyBox v1.15.3 (2010-05-07 01:27:07 BST)
|
||
|
||
starting pid 331, tty '': '/etc/rc.d/rc.local'
|
||
warning: can't open /etc/mtab: No such file or directory
|
||
Thu Jan 1 00:00:02 UTC 1970
|
||
S: devpts
|
||
Thu Jan 1 00:00:02 UTC 1970
|