9567c839fe
The RubyCache (CacheMemory) latency parameter is only used for top-level caches instantiated for Ruby coherence protocols. However, the top-level cache hit latency is assessed by the Sequencer as accesses flow through to the cache hierarchy. Further, protocol state machines should be enforcing these cache hit latencies, but RubyCaches do not expose their latency to any existng state machines through the SLICC/C++ interface. Thus, the RubyCache latency parameter is superfluous for all caches. This is confusing for users. As a step toward pushing L0/L1 cache hit latency into the top-level cache controllers, move their latencies out of the RubyCache declarations and over to their Sequencers. Eventually, these Sequencer parameters should be exposed as parameters to the top-level cache controllers, which should assess the latency. NOTE: Assessing these latencies in the cache controllers will require modifying each to eliminate instantaneous Ruby hit callbacks in transitions that finish accesses, which is likely a large undertaking.
239 lines
9.9 KiB
Python
239 lines
9.9 KiB
Python
# Copyright (c) 2006-2007 The Regents of The University of Michigan
|
|
# Copyright (c) 2009 Advanced Micro Devices, Inc.
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are
|
|
# met: redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer;
|
|
# redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution;
|
|
# neither the name of the copyright holders nor the names of its
|
|
# contributors may be used to endorse or promote products derived from
|
|
# this software without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
# Authors: Brad Beckmann
|
|
|
|
import math
|
|
import m5
|
|
from m5.objects import *
|
|
from m5.defines import buildEnv
|
|
from Ruby import create_topology
|
|
from Ruby import send_evicts
|
|
|
|
#
|
|
# Declare caches used by the protocol
|
|
#
|
|
class L1Cache(RubyCache): pass
|
|
class L2Cache(RubyCache): pass
|
|
#
|
|
# Probe filter is a cache
|
|
#
|
|
class ProbeFilter(RubyCache): pass
|
|
|
|
def define_options(parser):
|
|
parser.add_option("--allow-atomic-migration", action="store_true",
|
|
help="allow migratory sharing for atomic only accessed blocks")
|
|
parser.add_option("--pf-on", action="store_true",
|
|
help="Hammer: enable Probe Filter")
|
|
parser.add_option("--dir-on", action="store_true",
|
|
help="Hammer: enable Full-bit Directory")
|
|
|
|
def create_system(options, full_system, system, dma_ports, ruby_system):
|
|
|
|
if buildEnv['PROTOCOL'] != 'MOESI_hammer':
|
|
panic("This script requires the MOESI_hammer protocol to be built.")
|
|
|
|
cpu_sequencers = []
|
|
|
|
#
|
|
# The ruby network creation expects the list of nodes in the system to be
|
|
# consistent with the NetDest list. Therefore the l1 controller nodes must be
|
|
# listed before the directory nodes and directory nodes before dma nodes, etc.
|
|
#
|
|
l1_cntrl_nodes = []
|
|
dir_cntrl_nodes = []
|
|
dma_cntrl_nodes = []
|
|
|
|
#
|
|
# Must create the individual controllers before the network to ensure the
|
|
# controller constructors are called before the network constructor
|
|
#
|
|
block_size_bits = int(math.log(options.cacheline_size, 2))
|
|
|
|
for i in xrange(options.num_cpus):
|
|
#
|
|
# First create the Ruby objects associated with this cpu
|
|
#
|
|
l1i_cache = L1Cache(size = options.l1i_size,
|
|
assoc = options.l1i_assoc,
|
|
start_index_bit = block_size_bits,
|
|
is_icache = True)
|
|
l1d_cache = L1Cache(size = options.l1d_size,
|
|
assoc = options.l1d_assoc,
|
|
start_index_bit = block_size_bits)
|
|
l2_cache = L2Cache(size = options.l2_size,
|
|
assoc = options.l2_assoc,
|
|
start_index_bit = block_size_bits)
|
|
|
|
l1_cntrl = L1Cache_Controller(version = i,
|
|
L1Icache = l1i_cache,
|
|
L1Dcache = l1d_cache,
|
|
L2cache = l2_cache,
|
|
no_mig_atomic = not \
|
|
options.allow_atomic_migration,
|
|
send_evictions = send_evicts(options),
|
|
transitions_per_cycle = options.ports,
|
|
clk_domain=system.cpu[i].clk_domain,
|
|
ruby_system = ruby_system)
|
|
|
|
cpu_seq = RubySequencer(version = i,
|
|
icache = l1i_cache,
|
|
dcache = l1d_cache,
|
|
clk_domain=system.cpu[i].clk_domain,
|
|
ruby_system = ruby_system)
|
|
|
|
l1_cntrl.sequencer = cpu_seq
|
|
if options.recycle_latency:
|
|
l1_cntrl.recycle_latency = options.recycle_latency
|
|
|
|
exec("ruby_system.l1_cntrl%d = l1_cntrl" % i)
|
|
|
|
# Add controllers and sequencers to the appropriate lists
|
|
cpu_sequencers.append(cpu_seq)
|
|
l1_cntrl_nodes.append(l1_cntrl)
|
|
|
|
# Connect the L1 controller and the network
|
|
# Connect the buffers from the controller to network
|
|
l1_cntrl.requestFromCache = ruby_system.network.slave
|
|
l1_cntrl.responseFromCache = ruby_system.network.slave
|
|
l1_cntrl.unblockFromCache = ruby_system.network.slave
|
|
|
|
# Connect the buffers from the network to the controller
|
|
l1_cntrl.forwardToCache = ruby_system.network.master
|
|
l1_cntrl.responseToCache = ruby_system.network.master
|
|
|
|
|
|
phys_mem_size = sum(map(lambda r: r.size(), system.mem_ranges))
|
|
assert(phys_mem_size % options.num_dirs == 0)
|
|
mem_module_size = phys_mem_size / options.num_dirs
|
|
|
|
#
|
|
# determine size and index bits for probe filter
|
|
# By default, the probe filter size is configured to be twice the
|
|
# size of the L2 cache.
|
|
#
|
|
pf_size = MemorySize(options.l2_size)
|
|
pf_size.value = pf_size.value * 2
|
|
dir_bits = int(math.log(options.num_dirs, 2))
|
|
pf_bits = int(math.log(pf_size.value, 2))
|
|
if options.numa_high_bit:
|
|
if options.pf_on or options.dir_on:
|
|
# if numa high bit explicitly set, make sure it does not overlap
|
|
# with the probe filter index
|
|
assert(options.numa_high_bit - dir_bits > pf_bits)
|
|
|
|
# set the probe filter start bit to just above the block offset
|
|
pf_start_bit = block_size_bits
|
|
else:
|
|
if dir_bits > 0:
|
|
pf_start_bit = dir_bits + block_size_bits - 1
|
|
else:
|
|
pf_start_bit = block_size_bits
|
|
|
|
# Run each of the ruby memory controllers at a ratio of the frequency of
|
|
# the ruby system
|
|
# clk_divider value is a fix to pass regression.
|
|
ruby_system.memctrl_clk_domain = DerivedClockDomain(
|
|
clk_domain=ruby_system.clk_domain,
|
|
clk_divider=3)
|
|
|
|
for i in xrange(options.num_dirs):
|
|
dir_size = MemorySize('0B')
|
|
dir_size.value = mem_module_size
|
|
|
|
pf = ProbeFilter(size = pf_size, assoc = 4,
|
|
start_index_bit = pf_start_bit)
|
|
|
|
dir_cntrl = Directory_Controller(version = i,
|
|
directory = RubyDirectoryMemory(
|
|
version = i, size = dir_size),
|
|
probeFilter = pf,
|
|
probe_filter_enabled = options.pf_on,
|
|
full_bit_dir_enabled = options.dir_on,
|
|
transitions_per_cycle = options.ports,
|
|
ruby_system = ruby_system)
|
|
|
|
if options.recycle_latency:
|
|
dir_cntrl.recycle_latency = options.recycle_latency
|
|
|
|
exec("ruby_system.dir_cntrl%d = dir_cntrl" % i)
|
|
dir_cntrl_nodes.append(dir_cntrl)
|
|
|
|
# Connect the directory controller to the network
|
|
dir_cntrl.forwardFromDir = ruby_system.network.slave
|
|
dir_cntrl.responseFromDir = ruby_system.network.slave
|
|
dir_cntrl.dmaResponseFromDir = ruby_system.network.slave
|
|
|
|
dir_cntrl.unblockToDir = ruby_system.network.master
|
|
dir_cntrl.responseToDir = ruby_system.network.master
|
|
dir_cntrl.requestToDir = ruby_system.network.master
|
|
dir_cntrl.dmaRequestToDir = ruby_system.network.master
|
|
|
|
|
|
for i, dma_port in enumerate(dma_ports):
|
|
#
|
|
# Create the Ruby objects associated with the dma controller
|
|
#
|
|
dma_seq = DMASequencer(version = i,
|
|
ruby_system = ruby_system,
|
|
slave = dma_port)
|
|
|
|
dma_cntrl = DMA_Controller(version = i,
|
|
dma_sequencer = dma_seq,
|
|
transitions_per_cycle = options.ports,
|
|
ruby_system = ruby_system)
|
|
|
|
exec("ruby_system.dma_cntrl%d = dma_cntrl" % i)
|
|
dma_cntrl_nodes.append(dma_cntrl)
|
|
|
|
if options.recycle_latency:
|
|
dma_cntrl.recycle_latency = options.recycle_latency
|
|
|
|
# Connect the dma controller to the network
|
|
dma_cntrl.responseFromDir = ruby_system.network.master
|
|
dma_cntrl.requestToDir = ruby_system.network.slave
|
|
|
|
all_cntrls = l1_cntrl_nodes + dir_cntrl_nodes + dma_cntrl_nodes
|
|
|
|
# Create the io controller and the sequencer
|
|
if full_system:
|
|
io_seq = DMASequencer(version=len(dma_ports), ruby_system=ruby_system)
|
|
ruby_system._io_port = io_seq
|
|
io_controller = DMA_Controller(version = len(dma_ports),
|
|
dma_sequencer = io_seq,
|
|
ruby_system = ruby_system)
|
|
ruby_system.io_controller = io_controller
|
|
|
|
# Connect the dma controller to the network
|
|
io_controller.responseFromDir = ruby_system.network.master
|
|
io_controller.requestToDir = ruby_system.network.slave
|
|
|
|
all_cntrls = all_cntrls + [io_controller]
|
|
|
|
topology = create_topology(all_cntrls, options)
|
|
return (cpu_sequencers, dir_cntrl_nodes, topology)
|