gem5/ext/mcpat/memoryctrl.cc
Anthony Gutierrez e553a7bfa7 ext: add McPAT source
this patch adds the source for mcpat, a power, area, and timing modeling
framework.
2014-04-01 12:44:30 -04:00

736 lines
39 KiB
C++

/*****************************************************************************
* McPAT
* SOFTWARE LICENSE AGREEMENT
* Copyright 2012 Hewlett-Packard Development Company, L.P.
* All Rights Reserved
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.”
*
***************************************************************************/
#include <algorithm>
#include <cassert>
#include <cmath>
#include <iostream>
#include <string>
#include "XML_Parse.h"
#include "basic_circuit.h"
#include "basic_components.h"
#include "const.h"
#include "io.h"
#include "logic.h"
#include "memoryctrl.h"
#include "parameter.h"
/* overview of MC models:
* McPAT memory controllers are modeled according to large number of industrial data points.
* The Basic memory controller architecture is base on the Synopsis designs
* (DesignWare DDR2/DDR3-Lite memory controllers and DDR2/DDR3-Lite protocol controllers)
* as in Cadence ChipEstimator Tool
*
* An MC has 3 parts as shown in this design. McPAT models both high performance MC
* based on Niagara processor designs and curving and low power MC based on data points in
* Cadence ChipEstimator Tool.
*
* The frontend is modeled analytically, the backend is modeled empirically according to
* DDR2/DDR3-Lite protocol controllers in Cadence ChipEstimator Tool
* The PHY is modeled based on
* "A 100mW 9.6Gb/s Transceiver in 90nm CMOS for next-generation memory interfaces ," ISSCC 2006,
* and A 14mW 6.25Gb/s Transceiver in 90nm CMOS for Serial Chip-to-Chip Communication," ISSCC 2007
*
* In Cadence ChipEstimator Tool there are two types of memory controllers: the full memory controllers
* that includes the frontend as the DesignWare DDR2/DDR3-Lite memory controllers and the backend only
* memory controllers as the DDR2/DDR3-Lite protocol controllers (except DesignWare DDR2/DDR3-Lite memory
* controllers, all memory controller IP in Cadence ChipEstimator Tool are backend memory controllers such as
* DDRC 1600A and DDRC 800A). Thus,to some extend the area and power difference between DesignWare
* DDR2/DDR3-Lite memory controllers and DDR2/DDR3-Lite protocol controllers can be an estimation to the
* frontend power and area, which is very close the analitically modeled results of the frontend for Niagara2@65nm
*
*/
MCBackend::MCBackend(InputParameter* interface_ip_, const MCParam & mcp_, enum MemoryCtrl_type mc_type_)
:l_ip(*interface_ip_),
mc_type(mc_type_),
mcp(mcp_)
{
local_result = init_interface(&l_ip);
compute();
}
void MCBackend::compute()
{
//double max_row_addr_width = 20.0;//Current address 12~18bits
double C_MCB, mc_power, backend_dyn, backend_gates;//, refresh_period,refresh_freq;//Equivalent per bit Cap for backend,
double pmos_to_nmos_sizing_r = pmos_to_nmos_sz_ratio();
double NMOS_sizing, PMOS_sizing;
if (mc_type == MC)
{
if (mcp.type == 0)
{
//area = (2.2927*log(peakDataTransferRate)-14.504)*memDataWidth/144.0*(l_ip.F_sz_um/0.09);
area.set_area((2.7927*log(mcp.peakDataTransferRate*2)-19.862)/2.0*mcp.dataBusWidth/128.0*(l_ip.F_sz_um/0.09)*mcp.num_channels*1e6);//um^2
//assuming the approximately same scaling factor as seen in processors.
//C_MCB=0.2/1.3/1.3/266/64/0.09*g_ip.F_sz_um;//based on AMD Geode processor which has a very basic mc on chip.
//C_MCB = 1.6/200/1e6/144/1.2/1.2*g_ip.F_sz_um/0.19;//Based on Niagara power numbers.The base power (W) is divided by device frequency and vdd and scale to target process.
//mc_power = 0.0291*2;//29.1mW@200MHz @130nm From Power Analysis of SystemLevel OnChip Communication Architectures by Lahiri et
mc_power = 4.32*0.1;//4.32W@1GhzMHz @65nm Cadence ChipEstimator 10% for backend
C_MCB = mc_power/1e9/72/1.1/1.1*l_ip.F_sz_um/0.065;
power_t.readOp.dynamic = C_MCB*g_tp.peri_global.Vdd*g_tp.peri_global.Vdd*(mcp.dataBusWidth/*+mcp.addressBusWidth*/);//per access energy in memory controller
power_t.readOp.leakage = area.get_area()/2 *(g_tp.scaling_factor.core_tx_density)*cmos_Isub_leakage(g_tp.min_w_nmos_, g_tp.min_w_nmos_*pmos_to_nmos_sizing_r, 1, inv)*g_tp.peri_global.Vdd;//unit W
power_t.readOp.gate_leakage = area.get_area()/2 *(g_tp.scaling_factor.core_tx_density)*cmos_Ig_leakage(g_tp.min_w_nmos_, g_tp.min_w_nmos_*pmos_to_nmos_sizing_r, 1, inv)*g_tp.peri_global.Vdd;//unit W
}
else
{ NMOS_sizing = g_tp.min_w_nmos_;
PMOS_sizing = g_tp.min_w_nmos_*pmos_to_nmos_sizing_r;
area.set_area(0.15*mcp.dataBusWidth/72.0*(l_ip.F_sz_um/0.065)* (l_ip.F_sz_um/0.065)*mcp.num_channels*1e6);//um^2
backend_dyn = 0.9e-9/800e6*mcp.clockRate/12800*mcp.peakDataTransferRate*mcp.dataBusWidth/72.0*g_tp.peri_global.Vdd/1.1*g_tp.peri_global.Vdd/1.1*(l_ip.F_sz_nm/65.0);//Average on DDR2/3 protocol controller and DDRC 1600/800A in Cadence ChipEstimate
//Scaling to technology and DIMM feature. The base IP support DDR3-1600(PC3 12800)
backend_gates = 50000*mcp.dataBusWidth/64.0;//5000 is from Cadence ChipEstimator
power_t.readOp.dynamic = backend_dyn;
power_t.readOp.leakage = (backend_gates)*cmos_Isub_leakage(NMOS_sizing, PMOS_sizing, 2, nand)*g_tp.peri_global.Vdd;//unit W
power_t.readOp.gate_leakage = (backend_gates)*cmos_Ig_leakage(NMOS_sizing, PMOS_sizing, 2, nand)*g_tp.peri_global.Vdd;//unit W
}
}
else
{//skip old model
cout<<"Unknown memory controllers"<<endl;exit(0);
area.set_area(0.243*mcp.dataBusWidth/8);//area based on Cadence ChipEstimator for 8bit bus
//mc_power = 4.32*0.1;//4.32W@1GhzMHz @65nm Cadence ChipEstimator 10% for backend
C_MCB = mc_power/1e9/72/1.1/1.1*l_ip.F_sz_um/0.065;
power_t.readOp.leakage = area.get_area()/2 *(g_tp.scaling_factor.core_tx_density)*cmos_Isub_leakage(g_tp.min_w_nmos_, g_tp.min_w_nmos_*pmos_to_nmos_sizing_r, 1, inv)*g_tp.peri_global.Vdd;//unit W
power_t.readOp.gate_leakage = area.get_area()/2 *(g_tp.scaling_factor.core_tx_density)*cmos_Ig_leakage(g_tp.min_w_nmos_, g_tp.min_w_nmos_*pmos_to_nmos_sizing_r, 1, inv)*g_tp.peri_global.Vdd;//unit W
power_t.readOp.dynamic *= 1.2;
power_t.readOp.leakage *= 1.2;
power_t.readOp.gate_leakage *= 1.2;
//flash controller has about 20% more backend power since BCH ECC in flash is complex and power hungry
}
double long_channel_device_reduction = longer_channel_device_reduction(Uncore_device);
power_t.readOp.longer_channel_leakage = power_t.readOp.leakage * long_channel_device_reduction;
}
void MCBackend::computeEnergy(bool is_tdp)
{
//backend uses internal data buswidth
if (is_tdp)
{
//init stats for Peak
stats_t.readAc.access = 0.5*mcp.num_channels;
stats_t.writeAc.access = 0.5*mcp.num_channels;
tdp_stats = stats_t;
}
else
{
//init stats for runtime power (RTP)
stats_t.readAc.access = mcp.reads;
stats_t.writeAc.access = mcp.writes;
tdp_stats = stats_t;
}
if (is_tdp)
{
power = power_t;
power.readOp.dynamic = (stats_t.readAc.access + stats_t.writeAc.access)*power_t.readOp.dynamic;
}
else
{
rt_power.readOp.dynamic = (stats_t.readAc.access + stats_t.writeAc.access)*mcp.llcBlockSize*8.0/mcp.dataBusWidth*power_t.readOp.dynamic;
rt_power = rt_power + power_t*pppm_lkg;
rt_power.readOp.dynamic = rt_power.readOp.dynamic + power.readOp.dynamic*0.1*mcp.clockRate*mcp.num_mcs*mcp.executionTime;
//Assume 10% of peak power is consumed by routine job including memory refreshing and scrubbing
}
}
MCPHY::MCPHY(InputParameter* interface_ip_, const MCParam & mcp_, enum MemoryCtrl_type mc_type_)
:l_ip(*interface_ip_),
mc_type(mc_type_),
mcp(mcp_)
{
local_result = init_interface(&l_ip);
compute();
}
void MCPHY::compute()
{
//PHY uses internal data buswidth but the actuall off-chip datawidth is 64bits + ecc
double pmos_to_nmos_sizing_r = pmos_to_nmos_sz_ratio() ;
/*
* according to "A 100mW 9.6Gb/s Transceiver in 90nm CMOS for next-generation memory interfaces ," ISSCC 2006;
* From Cadence ChipEstimator for normal I/O around 0.4~0.8 mW/Gb/s
*/
double power_per_gb_per_s, phy_dyn,phy_gates, NMOS_sizing, PMOS_sizing;
if (mc_type == MC)
{
if (mcp.type == 0)
{
power_per_gb_per_s = mcp.LVDS? 0.01:0.04;
//Based on die photos from Niagara 1 and 2.
//TODO merge this into undifferentiated core.PHY only achieves square root of the ideal scaling.
//area = (6.4323*log(peakDataTransferRate)-34.76)*memDataWidth/128.0*(l_ip.F_sz_um/0.09);
area.set_area((6.4323*log(mcp.peakDataTransferRate*2)-48.134)*mcp.dataBusWidth/128.0*(l_ip.F_sz_um/0.09)*mcp.num_channels*1e6/2);//TODO:/2
//This is from curve fitting based on Niagara 1 and 2's PHY die photo.
//This is power not energy, 10mw/Gb/s @90nm for each channel and scaling down
//power.readOp.dynamic = 0.02*memAccesses*llcBlocksize*8;//change from Bytes to bits.
power_t.readOp.dynamic = power_per_gb_per_s*sqrt(l_ip.F_sz_um/0.09)*g_tp.peri_global.Vdd/1.2*g_tp.peri_global.Vdd/1.2;
power_t.readOp.leakage = area.get_area()/2 *(g_tp.scaling_factor.core_tx_density)*cmos_Isub_leakage(g_tp.min_w_nmos_, g_tp.min_w_nmos_*pmos_to_nmos_sizing_r, 1, inv)*g_tp.peri_global.Vdd;//unit W
power_t.readOp.gate_leakage = area.get_area()/2 *(g_tp.scaling_factor.core_tx_density)*cmos_Ig_leakage(g_tp.min_w_nmos_, g_tp.min_w_nmos_*pmos_to_nmos_sizing_r, 1, inv)*g_tp.peri_global.Vdd;//unit W
}
else
{
NMOS_sizing = g_tp.min_w_nmos_;
PMOS_sizing = g_tp.min_w_nmos_*pmos_to_nmos_sizing_r;
//Designware/synopsis 16bit DDR3 PHY is 1.3mm (WITH IOs) at 40nm for upto DDR3 2133 (PC3 17066)
double non_IO_percentage = 0.2;
area.set_area(1.3*non_IO_percentage/2133.0e6*mcp.clockRate/17066*mcp.peakDataTransferRate*mcp.dataBusWidth/16.0*(l_ip.F_sz_um/0.040)* (l_ip.F_sz_um/0.040)*mcp.num_channels*1e6);//um^2
phy_gates = 200000*mcp.dataBusWidth/64.0;
power_per_gb_per_s = 0.01;
//This is power not energy, 10mw/Gb/s @90nm for each channel and scaling down
power_t.readOp.dynamic = power_per_gb_per_s*(l_ip.F_sz_um/0.09)*g_tp.peri_global.Vdd/1.2*g_tp.peri_global.Vdd/1.2;
power_t.readOp.leakage = (mcp.withPHY? phy_gates:0)*cmos_Isub_leakage(NMOS_sizing, PMOS_sizing, 2, nand)*g_tp.peri_global.Vdd;//unit W
power_t.readOp.gate_leakage = (mcp.withPHY? phy_gates:0)*cmos_Ig_leakage(NMOS_sizing, PMOS_sizing, 2, nand)*g_tp.peri_global.Vdd;//unit W
}
}
else
{
area.set_area(0.4e6/2*mcp.dataBusWidth/8);//area based on Cadence ChipEstimator for 8bit bus
}
// double phy_factor = (int)ceil(mcp.dataBusWidth/72.0);//Previous phy power numbers are based on 72 bit DIMM interface
// power_t.readOp.dynamic *= phy_factor;
// power_t.readOp.leakage *= phy_factor;
// power_t.readOp.gate_leakage *= phy_factor;
double long_channel_device_reduction = longer_channel_device_reduction(Uncore_device);
power_t.readOp.longer_channel_leakage = power_t.readOp.leakage * long_channel_device_reduction;
}
void MCPHY::computeEnergy(bool is_tdp)
{
if (is_tdp)
{
//init stats for Peak
stats_t.readAc.access = 0.5*mcp.num_channels; //time share on buses
stats_t.writeAc.access = 0.5*mcp.num_channels;
tdp_stats = stats_t;
}
else
{
//init stats for runtime power (RTP)
stats_t.readAc.access = mcp.reads;
stats_t.writeAc.access = mcp.writes;
tdp_stats = stats_t;
}
if (is_tdp)
{
double data_transfer_unit = (mc_type == MC)? 72:16;/*DIMM data width*/
power = power_t;
power.readOp.dynamic = power.readOp.dynamic * (mcp.peakDataTransferRate*8*1e6/1e9/*change to Gbs*/)*mcp.dataBusWidth/data_transfer_unit*mcp.num_channels/mcp.clockRate;
// divide by clock rate is for match the final computation where *clock is used
//(stats_t.readAc.access*power_t.readOp.dynamic+
// stats_t.writeAc.access*power_t.readOp.dynamic);
}
else
{
rt_power = power_t;
// rt_power.readOp.dynamic = (stats_t.readAc.access*power_t.readOp.dynamic+
// stats_t.writeAc.access*power_t.readOp.dynamic);
rt_power.readOp.dynamic=power_t.readOp.dynamic*(stats_t.readAc.access + stats_t.writeAc.access)*(mcp.llcBlockSize)*8/1e9/mcp.executionTime*(mcp.executionTime);
rt_power.readOp.dynamic = rt_power.readOp.dynamic + power.readOp.dynamic*0.1*mcp.clockRate*mcp.num_mcs*mcp.executionTime;
}
}
MCFrontEnd::MCFrontEnd(ParseXML *XML_interface,InputParameter* interface_ip_, const MCParam & mcp_, enum MemoryCtrl_type mc_type_)
:XML(XML_interface),
interface_ip(*interface_ip_),
mc_type(mc_type_),
mcp(mcp_),
MC_arb(0),
frontendBuffer(0),
readBuffer(0),
writeBuffer(0)
{
/* All computations are for a single MC
*
*/
int tag, data;
bool is_default =true;//indication for default setup
/* MC frontend engine channels share the same engines but logically partitioned
* For all hardware inside MC. different channels do not share resources.
* TODO: add docodeing/mux stage to steer memory requests to different channels.
*/
//memory request reorder buffer
tag = mcp.addressBusWidth + EXTRA_TAG_BITS + mcp.opcodeW;
data = int(ceil((XML->sys.physical_address_width + mcp.opcodeW)/8.0));
interface_ip.cache_sz = data*XML->sys.mc.req_window_size_per_channel;
interface_ip.line_sz = data;
interface_ip.assoc = 0;
interface_ip.nbanks = 1;
interface_ip.out_w = interface_ip.line_sz*8;
interface_ip.specific_tag = 1;
interface_ip.tag_w = tag;
interface_ip.access_mode = 0;
interface_ip.throughput = 1.0/mcp.clockRate;
interface_ip.latency = 1.0/mcp.clockRate;
interface_ip.is_cache = true;
interface_ip.pure_cam = false;
interface_ip.pure_ram = false;
interface_ip.obj_func_dyn_energy = 0;
interface_ip.obj_func_dyn_power = 0;
interface_ip.obj_func_leak_power = 0;
interface_ip.obj_func_cycle_t = 1;
interface_ip.num_rw_ports = 0;
interface_ip.num_rd_ports = XML->sys.mc.memory_channels_per_mc;
interface_ip.num_wr_ports = interface_ip.num_rd_ports;
interface_ip.num_se_rd_ports = 0;
interface_ip.num_search_ports = XML->sys.mc.memory_channels_per_mc;
frontendBuffer = new ArrayST(&interface_ip, "MC ReorderBuffer", Uncore_device);
frontendBuffer->area.set_area(frontendBuffer->area.get_area()+ frontendBuffer->local_result.area*XML->sys.mc.memory_channels_per_mc);
area.set_area(area.get_area()+ frontendBuffer->local_result.area*XML->sys.mc.memory_channels_per_mc);
//selection and arbitration logic
MC_arb = new selection_logic(is_default, XML->sys.mc.req_window_size_per_channel,1,&interface_ip, Uncore_device);
//read buffers.
data = (int)ceil(mcp.dataBusWidth/8.0);//Support key words first operation //8 means converting bit to Byte
interface_ip.cache_sz = data*XML->sys.mc.IO_buffer_size_per_channel;//*llcBlockSize;
interface_ip.line_sz = data;
interface_ip.assoc = 1;
interface_ip.nbanks = 1;
interface_ip.out_w = interface_ip.line_sz*8;
interface_ip.access_mode = 1;
interface_ip.throughput = 1.0/mcp.clockRate;
interface_ip.latency = 1.0/mcp.clockRate;
interface_ip.is_cache = false;
interface_ip.pure_cam = false;
interface_ip.pure_ram = true;
interface_ip.obj_func_dyn_energy = 0;
interface_ip.obj_func_dyn_power = 0;
interface_ip.obj_func_leak_power = 0;
interface_ip.obj_func_cycle_t = 1;
interface_ip.num_rw_ports = 0;//XML->sys.mc.memory_channels_per_mc*2>2?2:XML->sys.mc.memory_channels_per_mc*2;
interface_ip.num_rd_ports = XML->sys.mc.memory_channels_per_mc;
interface_ip.num_wr_ports = interface_ip.num_rd_ports;
interface_ip.num_se_rd_ports = 0;
readBuffer = new ArrayST(&interface_ip, "MC ReadBuffer", Uncore_device);
readBuffer->area.set_area(readBuffer->area.get_area()+ readBuffer->local_result.area*XML->sys.mc.memory_channels_per_mc);
area.set_area(area.get_area()+ readBuffer->local_result.area*XML->sys.mc.memory_channels_per_mc);
//write buffer
data = (int)ceil(mcp.dataBusWidth/8.0);//Support key words first operation //8 means converting bit to Byte
interface_ip.cache_sz = data*XML->sys.mc.IO_buffer_size_per_channel;//*llcBlockSize;
interface_ip.line_sz = data;
interface_ip.assoc = 1;
interface_ip.nbanks = 1;
interface_ip.out_w = interface_ip.line_sz*8;
interface_ip.access_mode = 0;
interface_ip.throughput = 1.0/mcp.clockRate;
interface_ip.latency = 1.0/mcp.clockRate;
interface_ip.obj_func_dyn_energy = 0;
interface_ip.obj_func_dyn_power = 0;
interface_ip.obj_func_leak_power = 0;
interface_ip.obj_func_cycle_t = 1;
interface_ip.num_rw_ports = 0;
interface_ip.num_rd_ports = XML->sys.mc.memory_channels_per_mc;
interface_ip.num_wr_ports = interface_ip.num_rd_ports;
interface_ip.num_se_rd_ports = 0;
writeBuffer = new ArrayST(&interface_ip, "MC writeBuffer", Uncore_device);
writeBuffer->area.set_area(writeBuffer->area.get_area()+ writeBuffer->local_result.area*XML->sys.mc.memory_channels_per_mc);
area.set_area(area.get_area()+ writeBuffer->local_result.area*XML->sys.mc.memory_channels_per_mc);
}
void MCFrontEnd::computeEnergy(bool is_tdp)
{
if (is_tdp)
{
//init stats for Peak
frontendBuffer->stats_t.readAc.access = frontendBuffer->l_ip.num_search_ports;
frontendBuffer->stats_t.writeAc.access = frontendBuffer->l_ip.num_wr_ports;
frontendBuffer->tdp_stats = frontendBuffer->stats_t;
readBuffer->stats_t.readAc.access = readBuffer->l_ip.num_rd_ports*mcp.frontend_duty_cycle;
readBuffer->stats_t.writeAc.access = readBuffer->l_ip.num_wr_ports*mcp.frontend_duty_cycle;
readBuffer->tdp_stats = readBuffer->stats_t;
writeBuffer->stats_t.readAc.access = writeBuffer->l_ip.num_rd_ports*mcp.frontend_duty_cycle;
writeBuffer->stats_t.writeAc.access = writeBuffer->l_ip.num_wr_ports*mcp.frontend_duty_cycle;
writeBuffer->tdp_stats = writeBuffer->stats_t;
}
else
{
//init stats for runtime power (RTP)
frontendBuffer->stats_t.readAc.access = XML->sys.mc.memory_reads *mcp.llcBlockSize*8.0/mcp.dataBusWidth*mcp.dataBusWidth/72;
//For each channel, each memory word need to check the address data to achieve best scheduling results.
//and this need to be done on all physical DIMMs in each logical memory DIMM *mcp.dataBusWidth/72
frontendBuffer->stats_t.writeAc.access = XML->sys.mc.memory_writes*mcp.llcBlockSize*8.0/mcp.dataBusWidth*mcp.dataBusWidth/72;
frontendBuffer->rtp_stats = frontendBuffer->stats_t;
readBuffer->stats_t.readAc.access = XML->sys.mc.memory_reads*mcp.llcBlockSize*8.0/mcp.dataBusWidth;//support key word first
readBuffer->stats_t.writeAc.access = XML->sys.mc.memory_reads*mcp.llcBlockSize*8.0/mcp.dataBusWidth;//support key word first
readBuffer->rtp_stats = readBuffer->stats_t;
writeBuffer->stats_t.readAc.access = XML->sys.mc.memory_writes*mcp.llcBlockSize*8.0/mcp.dataBusWidth;
writeBuffer->stats_t.writeAc.access = XML->sys.mc.memory_writes*mcp.llcBlockSize*8.0/mcp.dataBusWidth;
writeBuffer->rtp_stats = writeBuffer->stats_t;
}
frontendBuffer->power_t.reset();
readBuffer->power_t.reset();
writeBuffer->power_t.reset();
// frontendBuffer->power_t.readOp.dynamic += (frontendBuffer->stats_t.readAc.access*
// (frontendBuffer->local_result.power.searchOp.dynamic+frontendBuffer->local_result.power.readOp.dynamic)+
// frontendBuffer->stats_t.writeAc.access*frontendBuffer->local_result.power.writeOp.dynamic);
frontendBuffer->power_t.readOp.dynamic += (frontendBuffer->stats_t.readAc.access +
frontendBuffer->stats_t.writeAc.access)*frontendBuffer->local_result.power.searchOp.dynamic
+ frontendBuffer->stats_t.readAc.access * frontendBuffer->local_result.power.readOp.dynamic
+ frontendBuffer->stats_t.writeAc.access*frontendBuffer->local_result.power.writeOp.dynamic;
readBuffer->power_t.readOp.dynamic += (readBuffer->stats_t.readAc.access*
readBuffer->local_result.power.readOp.dynamic+
readBuffer->stats_t.writeAc.access*readBuffer->local_result.power.writeOp.dynamic);
writeBuffer->power_t.readOp.dynamic += (writeBuffer->stats_t.readAc.access*
writeBuffer->local_result.power.readOp.dynamic+
writeBuffer->stats_t.writeAc.access*writeBuffer->local_result.power.writeOp.dynamic);
if (is_tdp)
{
power = power + frontendBuffer->power_t + readBuffer->power_t + writeBuffer->power_t +
(frontendBuffer->local_result.power +
readBuffer->local_result.power +
writeBuffer->local_result.power)*pppm_lkg;
}
else
{
rt_power = rt_power + frontendBuffer->power_t + readBuffer->power_t + writeBuffer->power_t +
(frontendBuffer->local_result.power +
readBuffer->local_result.power +
writeBuffer->local_result.power)*pppm_lkg;
rt_power.readOp.dynamic = rt_power.readOp.dynamic + power.readOp.dynamic*0.1*mcp.clockRate*mcp.num_mcs*mcp.executionTime;
}
}
void MCFrontEnd::displayEnergy(uint32_t indent,int plevel,bool is_tdp)
{
string indent_str(indent, ' ');
string indent_str_next(indent+2, ' ');
if (is_tdp)
{
cout << indent_str << "Front End ROB:" << endl;
cout << indent_str_next << "Area = " << frontendBuffer->area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << frontendBuffer->power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << frontendBuffer->power.readOp.leakage <<" W" << endl;
cout << indent_str_next << "Gate Leakage = " << frontendBuffer->power.readOp.gate_leakage << " W" << endl;
cout << indent_str_next << "Runtime Dynamic = " << frontendBuffer->rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout <<endl;
cout << indent_str<< "Read Buffer:" << endl;
cout << indent_str_next << "Area = " << readBuffer->area.get_area()*1e-6 << " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << readBuffer->power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << readBuffer->power.readOp.leakage << " W" << endl;
cout << indent_str_next << "Gate Leakage = " << readBuffer->power.readOp.gate_leakage << " W" << endl;
cout << indent_str_next << "Runtime Dynamic = " << readBuffer->rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout <<endl;
cout << indent_str << "Write Buffer:" << endl;
cout << indent_str_next << "Area = " << writeBuffer->area.get_area() *1e-6 << " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << writeBuffer->power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << writeBuffer->power.readOp.leakage << " W" << endl;
cout << indent_str_next << "Gate Leakage = " << writeBuffer->power.readOp.gate_leakage << " W" << endl;
cout << indent_str_next << "Runtime Dynamic = " << writeBuffer->rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout <<endl;
}
else
{
cout << indent_str << "Front End ROB:" << endl;
cout << indent_str_next << "Area = " << frontendBuffer->area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << frontendBuffer->rt_power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << frontendBuffer->rt_power.readOp.leakage <<" W" << endl;
cout << indent_str_next << "Gate Leakage = " << frontendBuffer->rt_power.readOp.gate_leakage << " W" << endl;
cout <<endl;
cout << indent_str<< "Read Buffer:" << endl;
cout << indent_str_next << "Area = " << readBuffer->area.get_area()*1e-6 << " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << readBuffer->rt_power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << readBuffer->rt_power.readOp.leakage << " W" << endl;
cout << indent_str_next << "Gate Leakage = " << readBuffer->rt_power.readOp.gate_leakage << " W" << endl;
cout <<endl;
cout << indent_str << "Write Buffer:" << endl;
cout << indent_str_next << "Area = " << writeBuffer->area.get_area() *1e-6 << " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << writeBuffer->rt_power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << writeBuffer->rt_power.readOp.leakage << " W" << endl;
cout << indent_str_next << "Gate Leakage = " << writeBuffer->rt_power.readOp.gate_leakage << " W" << endl;
}
}
MemoryController::MemoryController(ParseXML *XML_interface,InputParameter* interface_ip_, enum MemoryCtrl_type mc_type_)
:XML(XML_interface),
interface_ip(*interface_ip_),
mc_type(mc_type_),
frontend(0),
transecEngine(0),
PHY(0),
pipeLogic(0)
{
/* All computations are for a single MC
*
*/
interface_ip.wire_is_mat_type = 2;
interface_ip.wire_os_mat_type = 2;
interface_ip.wt =Global;
set_mc_param();
frontend = new MCFrontEnd(XML, &interface_ip, mcp, mc_type);
area.set_area(area.get_area()+ frontend->area.get_area());
transecEngine = new MCBackend(&interface_ip, mcp, mc_type);
area.set_area(area.get_area()+ transecEngine->area.get_area());
if (mcp.type==0 || (mcp.type==1&&mcp.withPHY))
{
PHY = new MCPHY(&interface_ip, mcp, mc_type);
area.set_area(area.get_area()+ PHY->area.get_area());
}
//+++++++++Transaction engine +++++++++++++++++ ////TODO needs better numbers, Run the RTL code from OpenSparc.
// transecEngine.initialize(&interface_ip);
// transecEngine.peakDataTransferRate = XML->sys.mem.peak_transfer_rate;
// transecEngine.memDataWidth = dataBusWidth;
// transecEngine.memRank = XML->sys.mem.number_ranks;
// //transecEngine.memAccesses=XML->sys.mc.memory_accesses;
// //transecEngine.llcBlocksize=llcBlockSize;
// transecEngine.compute();
// transecEngine.area.set_area(XML->sys.mc.memory_channels_per_mc*transecEngine.area.get_area()) ;
// area.set_area(area.get_area()+ transecEngine.area.get_area());
// ///cout<<"area="<<area<<endl;
////
// //++++++++++++++PHY ++++++++++++++++++++++++++ //TODO needs better numbers
// PHY.initialize(&interface_ip);
// PHY.peakDataTransferRate = XML->sys.mem.peak_transfer_rate;
// PHY.memDataWidth = dataBusWidth;
// //PHY.memAccesses=PHY.peakDataTransferRate;//this is the max power
// //PHY.llcBlocksize=llcBlockSize;
// PHY.compute();
// PHY.area.set_area(XML->sys.mc.memory_channels_per_mc*PHY.area.get_area()) ;
// area.set_area(area.get_area()+ PHY.area.get_area());
///cout<<"area="<<area<<endl;
//
// interface_ip.pipeline_stages = 5;//normal memory controller has five stages in the pipeline.
// interface_ip.per_stage_vector = addressBusWidth + XML->sys.core[0].opcode_width + dataBusWidth;
// pipeLogic = new pipeline(is_default, &interface_ip);
// //pipeLogic.init_pipeline(is_default, &interface_ip);
// pipeLogic->compute_pipeline();
// area.set_area(area.get_area()+ pipeLogic->area.get_area()*1e-6);
// area.set_area((area.get_area()+mc_area*1e-6)*1.1);//placement and routing overhead
//
//
//// //clock
//// clockNetwork.init_wire_external(is_default, &interface_ip);
//// clockNetwork.clk_area =area*1.1;//10% of placement overhead. rule of thumb
//// clockNetwork.end_wiring_level =5;//toplevel metal
//// clockNetwork.start_wiring_level =5;//toplevel metal
//// clockNetwork.num_regs = pipeLogic.tot_stage_vector;
//// clockNetwork.optimize_wire();
}
void MemoryController::computeEnergy(bool is_tdp)
{
frontend->computeEnergy(is_tdp);
transecEngine->computeEnergy(is_tdp);
if (mcp.type==0 || (mcp.type==1&&mcp.withPHY))
{
PHY->computeEnergy(is_tdp);
}
if (is_tdp)
{
power = power + frontend->power + transecEngine->power;
if (mcp.type==0 || (mcp.type==1&&mcp.withPHY))
{
power = power + PHY->power;
}
}
else
{
rt_power = rt_power + frontend->rt_power + transecEngine->rt_power;
if (mcp.type==0 || (mcp.type==1&&mcp.withPHY))
{
rt_power = rt_power + PHY->rt_power;
}
}
}
void MemoryController::displayEnergy(uint32_t indent,int plevel,bool is_tdp)
{
string indent_str(indent, ' ');
string indent_str_next(indent+2, ' ');
bool long_channel = XML->sys.longer_channel_device;
if (is_tdp)
{
cout << "Memory Controller:" << endl;
cout << indent_str<< "Area = " << area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str << "Peak Dynamic = " << power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str<< "Subthreshold Leakage = "
<< (long_channel? power.readOp.longer_channel_leakage:power.readOp.leakage) <<" W" << endl;
//cout << indent_str<< "Subthreshold Leakage = " << power.readOp.longer_channel_leakage <<" W" << endl;
cout << indent_str<< "Gate Leakage = " << power.readOp.gate_leakage << " W" << endl;
cout << indent_str << "Runtime Dynamic = " << rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout<<endl;
cout << indent_str << "Front End Engine:" << endl;
cout << indent_str_next << "Area = " << frontend->area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << frontend->power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = "
<< (long_channel? frontend->power.readOp.longer_channel_leakage:frontend->power.readOp.leakage) <<" W" << endl;
cout << indent_str_next << "Gate Leakage = " << frontend->power.readOp.gate_leakage << " W" << endl;
cout << indent_str_next << "Runtime Dynamic = " << frontend->rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout <<endl;
if (plevel >2){
frontend->displayEnergy(indent+4,is_tdp);
}
cout << indent_str << "Transaction Engine:" << endl;
cout << indent_str_next << "Area = " << transecEngine->area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << transecEngine->power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = "
<< (long_channel? transecEngine->power.readOp.longer_channel_leakage:transecEngine->power.readOp.leakage) <<" W" << endl;
cout << indent_str_next << "Gate Leakage = " << transecEngine->power.readOp.gate_leakage << " W" << endl;
cout << indent_str_next << "Runtime Dynamic = " << transecEngine->rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout <<endl;
if (mcp.type==0 || (mcp.type==1&&mcp.withPHY))
{
cout << indent_str << "PHY:" << endl;
cout << indent_str_next << "Area = " << PHY->area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << PHY->power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = "
<< (long_channel? PHY->power.readOp.longer_channel_leakage:PHY->power.readOp.leakage) <<" W" << endl;
cout << indent_str_next << "Gate Leakage = " << PHY->power.readOp.gate_leakage << " W" << endl;
cout << indent_str_next << "Runtime Dynamic = " << PHY->rt_power.readOp.dynamic/mcp.executionTime << " W" << endl;
cout <<endl;
}
}
else
{
cout << "Memory Controller:" << endl;
cout << indent_str_next << "Area = " << area.get_area()*1e-6<< " mm^2" << endl;
cout << indent_str_next << "Peak Dynamic = " << power.readOp.dynamic*mcp.clockRate << " W" << endl;
cout << indent_str_next << "Subthreshold Leakage = " << power.readOp.leakage <<" W" << endl;
cout << indent_str_next << "Gate Leakage = " << power.readOp.gate_leakage << " W" << endl;
cout<<endl;
}
}
void MemoryController::set_mc_param()
{
if (mc_type==MC)
{
mcp.clockRate =XML->sys.mc.mc_clock*2;//DDR double pumped
mcp.clockRate *= 1e6;
mcp.executionTime = XML->sys.total_cycles/(XML->sys.target_core_clockrate*1e6);
mcp.llcBlockSize =int(ceil(XML->sys.mc.llc_line_length/8.0))+XML->sys.mc.llc_line_length;//ecc overhead
mcp.dataBusWidth =int(ceil(XML->sys.mc.databus_width/8.0)) + XML->sys.mc.databus_width;
mcp.addressBusWidth =int(ceil(XML->sys.mc.addressbus_width));//XML->sys.physical_address_width;
mcp.opcodeW =16;
mcp.num_mcs = XML->sys.mc.number_mcs;
mcp.num_channels = XML->sys.mc.memory_channels_per_mc;
mcp.reads = XML->sys.mc.memory_reads;
mcp.writes = XML->sys.mc.memory_writes;
//+++++++++Transaction engine +++++++++++++++++ ////TODO needs better numbers, Run the RTL code from OpenSparc.
mcp.peakDataTransferRate = XML->sys.mc.peak_transfer_rate;
mcp.memRank = XML->sys.mc.number_ranks;
//++++++++++++++PHY ++++++++++++++++++++++++++ //TODO needs better numbers
//PHY.memAccesses=PHY.peakDataTransferRate;//this is the max power
//PHY.llcBlocksize=llcBlockSize;
mcp.frontend_duty_cycle = 0.5;//for max power, the actual off-chip links is bidirectional but time shared
mcp.LVDS = XML->sys.mc.LVDS;
mcp.type = XML->sys.mc.type;
mcp.withPHY = XML->sys.mc.withPHY;
}
// else if (mc_type==FLASHC)
// {
// mcp.clockRate =XML->sys.flashc.mc_clock*2;//DDR double pumped
// mcp.clockRate *= 1e6;
// mcp.executionTime = XML->sys.total_cycles/(XML->sys.target_core_clockrate*1e6);
//
// mcp.llcBlockSize =int(ceil(XML->sys.flashc.llc_line_length/8.0))+XML->sys.flashc.llc_line_length;//ecc overhead
// mcp.dataBusWidth =int(ceil(XML->sys.flashc.databus_width/8.0)) + XML->sys.flashc.databus_width;
// mcp.addressBusWidth =int(ceil(XML->sys.flashc.addressbus_width));//XML->sys.physical_address_width;
// mcp.opcodeW =16;
// mcp.num_mcs = XML->sys.flashc.number_mcs;
// mcp.num_channels = XML->sys.flashc.memory_channels_per_mc;
// mcp.reads = XML->sys.flashc.memory_reads;
// mcp.writes = XML->sys.flashc.memory_writes;
// //+++++++++Transaction engine +++++++++++++++++ ////TODO needs better numbers, Run the RTL code from OpenSparc.
// mcp.peakDataTransferRate = XML->sys.flashc.peak_transfer_rate;
// mcp.memRank = XML->sys.flashc.number_ranks;
// //++++++++++++++PHY ++++++++++++++++++++++++++ //TODO needs better numbers
// //PHY.memAccesses=PHY.peakDataTransferRate;//this is the max power
// //PHY.llcBlocksize=llcBlockSize;
// mcp.frontend_duty_cycle = 0.5;//for max power, the actual off-chip links is bidirectional but time shared
// mcp.LVDS = XML->sys.flashc.LVDS;
// mcp.type = XML->sys.flashc.type;
// }
else
{
cout<<"Unknown memory controller type: neither DRAM controller nor Flash controller" <<endl;
exit(0);
}
}
MCFrontEnd ::~MCFrontEnd(){
if(MC_arb) {delete MC_arb; MC_arb = 0;}
if(frontendBuffer) {delete frontendBuffer; frontendBuffer = 0;}
if(readBuffer) {delete readBuffer; readBuffer = 0;}
if(writeBuffer) {delete writeBuffer; writeBuffer = 0;}
}
MemoryController ::~MemoryController(){
if(frontend) {delete frontend; frontend = 0;}
if(transecEngine) {delete transecEngine; transecEngine = 0;}
if(PHY) {delete PHY; PHY = 0;}
if(pipeLogic) {delete pipeLogic; pipeLogic = 0;}
}