gem5/sim/main.cc
Nathan Binkert e0b065ff7c Separate the stuff for SimObject from SimObject builder.
This makes testing a bit easier.

arch/alpha/alpha_memory.cc:
cpu/intr_control.cc:
cpu/memtest/memtest.cc:
cpu/simple_cpu/simple_cpu.cc:
dev/alpha_console.cc:
dev/console.cc:
dev/disk_image.cc:
dev/etherbus.cc:
dev/etherdump.cc:
dev/etherlink.cc:
dev/ethertap.cc:
dev/simple_disk.cc:
kern/tru64/tru64_system.cc:
sim/main.cc:
sim/prog.cc:
    Need to include builder.hh
    sort #includes
sim/sim_object.cc:
sim/sim_object.hh:
    Separate the SimObjectBuilder stuff into its own file

--HG--
extra : convert_revision : e8395e0cc6ae1f180f9cd6f100795a1ac44aeed5
2003-10-20 20:17:01 -04:00

426 lines
13 KiB
C++

/*
* Copyright (c) 2003 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
///
/// @file sim/main.cc
///
#include <sys/types.h>
#include <sys/stat.h>
#include <stdlib.h>
#include <signal.h>
#include <string>
#include <vector>
#include "base/copyright.hh"
#include "base/inifile.hh"
#include "base/misc.hh"
#include "base/pollevent.hh"
#include "base/statistics.hh"
#include "cpu/base_cpu.hh"
#include "cpu/full_cpu/smt.hh"
#include "sim/async.hh"
#include "sim/builder.hh"
#include "sim/configfile.hh"
#include "sim/host.hh"
#include "sim/sim_events.hh"
#include "sim/sim_exit.hh"
#include "sim/sim_object.hh"
#include "sim/sim_stats.hh"
#include "sim/sim_time.hh"
using namespace std;
// See async.h.
volatile bool async_event = false;
volatile bool async_dump = false;
volatile bool async_exit = false;
volatile bool async_io = false;
volatile bool async_alarm = false;
/// Stats signal handler.
void
dumpStatsHandler(int sigtype)
{
async_event = true;
async_dump = true;
}
/// Exit signal handler.
void
exitNowHandler(int sigtype)
{
async_event = true;
async_exit = true;
}
/// Simulator executable name
const char *myProgName = "";
/// Show brief help message.
static void
showBriefHelp(ostream &out)
{
out << "Usage: " << myProgName
<< " [-hn] [-Dname[=def]] [-Uname] [-I[dir]] "
<< "[--<section>:<param>=<value>] [<config file> ...]" << endl
<< " -h: print long help (including parameter listing)" << endl
<< " -n: don't load default.ini" << endl
<< " -u: don't quit on unreferenced parameters" << endl
<< " -D,-U,-I: passed to cpp for preprocessing .ini files" << endl;
}
/// Show verbose help message. Includes parameter listing from
/// showBriefHelp(), plus an exhaustive list of ini-file parameters
/// and SimObjects (with their parameters).
static void
showLongHelp(ostream &out)
{
showBriefHelp(out);
out << endl
<< endl
<< "-----------------" << endl
<< "Global Parameters" << endl
<< "-----------------" << endl
<< endl;
ParamContext::describeAllContexts(out);
out << endl
<< endl
<< "-----------------" << endl
<< "Simulator Objects" << endl
<< "-----------------" << endl
<< endl;
SimObjectClass::describeAllClasses(out);
}
/// Print welcome message.
static void
sayHello(ostream &out)
{
extern const char *compileDate; // from date.cc
ccprintf(out, "M5 Simulator System\n");
// display copyright
ccprintf(out, "%s\n", briefCopyright);
ccprintf(out, "M5 compiled on %d\n", compileDate);
char *host = getenv("HOSTNAME");
if (!host)
host = getenv("HOST");
if (host)
ccprintf(out, "M5 executing on %s\n", host);
ccprintf(out, "M5 simulation started %s\n", Time::start);
}
///
/// Echo the command line for posterity in such a way that it can be
/// used to rerun the same simulation (given the same .ini files).
///
static void
echoCommandLine(int argc, char **argv, ostream &out)
{
out << "command line: " << argv[0];
for (int i = 1; i < argc; i++) {
string arg(argv[i]);
out << ' ';
// If the arg contains spaces, we need to quote it.
// The rest of this is overkill to make it look purty.
// print dashes first outside quotes
int non_dash_pos = arg.find_first_not_of("-");
out << arg.substr(0, non_dash_pos); // print dashes
string body = arg.substr(non_dash_pos); // the rest
// if it's an assignment, handle the lhs & rhs separately
int eq_pos = body.find("=");
if (eq_pos == string::npos) {
out << quote(body);
}
else {
string lhs(body.substr(0, eq_pos));
string rhs(body.substr(eq_pos + 1));
out << quote(lhs) << "=" << quote(rhs);
}
}
out << endl << endl;
}
///
/// The simulator configuration database. This is the union of all
/// specified .ini files. This shouldn't need to be visible outside
/// this file, as it is passed as a parameter to all the param-parsing
/// routines.
///
static IniFile simConfigDB;
/// Check for a default.ini file and load it if necessary.
static void
handleDefaultIni(bool &loadIt, vector<char *> &cppArgs)
{
struct stat sb;
if (loadIt) {
if (stat("default.ini", &sb) == 0) {
if (!simConfigDB.loadCPP("default.ini", cppArgs)) {
cout << "Error processing file default.ini" << endl;
exit(1);
}
}
// set this whether it actually was found or not, so we don't
// bother to check again next time
loadIt = false;
}
}
/// M5 entry point.
int
main(int argc, char **argv)
{
// Save off program name
myProgName = argv[0];
signal(SIGFPE, SIG_IGN); // may occur on misspeculated paths
signal(SIGPIPE, SIG_IGN);
signal(SIGTRAP, SIG_IGN);
signal(SIGUSR1, dumpStatsHandler); // dump intermediate stats
signal(SIGINT, exitNowHandler); // dump final stats and exit
sayHello(cerr);
// Initialize statistics database
initBaseStats();
vector<char *> cppArgs;
// Should we use default.ini if it exists? By default, yes. (Use
// -n to override.)
bool loadDefaultIni = true;
// Should we quit if there are unreferenced parameters? By
// default, yes... it's a good way of catching typos in
// section/parameter names (which otherwise go by silently). Use
// -u to override.
bool quitOnUnreferenced = true;
// Parse command-line options. The tricky part here is figuring
// out whether to look for & load default.ini, and if needed,
// doing so at the right time w.r.t. processing the other
// parameters.
//
// Since most of the complex options are handled through the
// config database, we don't mess with getopts, and just parse
// manually.
for (int i = 1; i < argc; ++i) {
char *arg_str = argv[i];
// if arg starts with '-', parse as option,
// else treat it as a configuration file name and load it
if (arg_str[0] == '-') {
// switch on second char
switch (arg_str[1]) {
case 'h':
// -h: show help
showLongHelp(cerr);
exit(1);
case 'n':
// -n: don't load default.ini
if (!loadDefaultIni) {
cerr << "Warning: -n option needs to precede any "
<< "explicit configuration file name " << endl
<< " or command-line configuration parameter."
<< endl;
}
loadDefaultIni = false;
break;
case 'u':
// -u: don't quit on unreferenced parameters
quitOnUnreferenced = false;
break;
case 'D':
case 'U':
case 'I':
// cpp options: record & pass to cpp. Note that these
// cannot have spaces, i.e., '-Dname=val' is OK, but
// '-D name=val' is not. I don't consider this a
// problem, since even though gnu cpp accepts the
// latter, other cpp implementations do not (Tru64,
// for one).
cppArgs.push_back(arg_str);
break;
case '-':
// command-line configuration parameter:
// '--<section>:<parameter>=<value>'
// Load default.ini if necessary -- see comment in
// else clause below.
handleDefaultIni(loadDefaultIni, cppArgs);
if (!simConfigDB.add(arg_str + 2)) {
// parse error
ccprintf(cerr,
"Could not parse configuration argument '%s'\n"
"Expecting --<section>:<parameter>=<value>\n",
arg_str);
exit(0);
}
break;
default:
showBriefHelp(cerr);
ccprintf(cerr, "Fatal: invalid argument '%s'\n", arg_str);
exit(0);
}
}
else {
// no '-', treat as config file name
// If we haven't loaded default.ini yet, and we want to,
// now is the time. Can't do it sooner because we need to
// look for '-n', can't do it later since we want
// default.ini loaded first (so that any other settings
// override it).
handleDefaultIni(loadDefaultIni, cppArgs);
if (!simConfigDB.loadCPP(arg_str, cppArgs)) {
cprintf("Error processing file %s\n", arg_str);
exit(1);
}
}
}
// Final check for default.ini, in case no config files or
// command-line config parameters were given.
handleDefaultIni(loadDefaultIni, cppArgs);
// The configuration database is now complete; start processing it.
// Parse and check all non-config-hierarchy parameters.
ParamContext::parseAllContexts(simConfigDB);
ParamContext::checkAllContexts();
// Print header info into stats file. Can't do this sooner since
// the stat file name is set via a .ini param... thus it just got
// opened above during ParamContext::checkAllContexts().
// Print hello message to stats file if it's actually a file. If
// it's not (i.e. it's cout or cerr) then we already did it above.
if (statStreamIsFile)
sayHello(*statStream);
// Echo command line and all parameter settings to stats file as well.
echoCommandLine(argc, argv, *statStream);
ParamContext::showAllContexts(*statStream);
// Now process the configuration hierarchy and create the SimObjects.
ConfigHierarchy configHierarchy(simConfigDB);
configHierarchy.build();
configHierarchy.createSimObjects();
// Restore checkpointed state, if any.
configHierarchy.unserializeSimObjects();
// Done processing the configuration database.
// Check for unreferenced entries.
if (simConfigDB.printUnreferenced() && quitOnUnreferenced) {
cerr << "Fatal: unreferenced .ini sections/entries." << endl
<< "If this is not an error, add 'unref_section_ok=y' or "
<< "'unref_entries_ok=y' to the appropriate sections "
<< "to suppress this message." << endl;
exit(1);
}
SimObject::regAllStats();
// uncomment the following to get PC-based execution-time profile
#ifdef DO_PROFILE
init_profile((char *)&_init, (char *)&_fini);
#endif
// Check to make sure that the stats package is properly initialized
Statistics::check();
// Nothing to simulate if we don't have at least one CPU somewhere.
if (BaseCPU::numSimulatedCPUs() == 0) {
cerr << "Fatal: no CPUs to simulate." << endl;
exit(1);
}
while (!mainEventQueue.empty()) {
assert(curTick <= mainEventQueue.nextTick() &&
"event scheduled in the past");
// forward current cycle to the time of the first event on the
// queue
curTick = mainEventQueue.nextTick();
mainEventQueue.serviceOne();
if (async_event) {
async_event = false;
if (async_dump) {
async_dump = false;
new DumpStatsEvent();
}
if (async_exit) {
async_exit = false;
new SimExitEvent("User requested STOP");
}
if (async_io || async_alarm) {
async_io = false;
async_alarm = false;
pollQueue.service();
}
}
}
// This should never happen... every conceivable way for the
// simulation to terminate (hit max cycles/insts, signal,
// simulated system halts/exits) generates an exit event, so we
// should never run out of events on the queue.
exitNow("improperly exited event loop!", 1);
return 0;
}