sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/configs/common/Options.py
Dam Sunwoo 1e2a455a23 util: Streamline .apc project convertsion script 
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
2013-10-17 10:20:45 -05:00

254 lines
13 KiB
Python
Raw Blame History

# Copyright (c) 2013 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2008 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Lisa Hsu
import m5
from m5.defines import buildEnv
from m5.objects import *
from Benchmarks import *
import CpuConfig
import MemConfig
def _listCpuTypes(option, opt, value, parser):
CpuConfig.print_cpu_list()
sys.exit(0)
def _listMemTypes(option, opt, value, parser):
MemConfig.print_mem_list()
sys.exit(0)
def addCommonOptions(parser):
# system options
parser.add_option("--list-cpu-types",
action="callback", callback=_listCpuTypes,
help="List available CPU types")
parser.add_option("--cpu-type", type="choice", default="atomic",
choices=CpuConfig.cpu_names(),
help = "type of cpu to run with")
parser.add_option("--checker", action="store_true");
parser.add_option("-n", "--num-cpus", type="int", default=1)
parser.add_option("--sys-voltage", action="store", type="string",
default='1.0V',
help = """Top-level voltage for blocks running at system
power supply""")
parser.add_option("--sys-clock", action="store", type="string",
default='1GHz',
help = """Top-level clock for blocks running at system
speed""")
parser.add_option("--cpu-clock", action="store", type="string",
default='2GHz',
help="Clock for blocks running at CPU speed")
parser.add_option("--smt", action="store_true", default=False,
help = """
Only used if multiple programs are specified. If true,
then the number of threads per cpu is same as the
number of programs.""")
# Memory Options
parser.add_option("--list-mem-types",
action="callback", callback=_listMemTypes,
help="List available memory types")
parser.add_option("--mem-type", type="choice", default="simple_mem",
choices=MemConfig.mem_names(),
help = "type of memory to use")
parser.add_option("--mem-channels", type="int", default=1,
help = "number of memory channels")
parser.add_option("--mem-size", action="store", type="string",
default="512MB",
help="Specify the physical memory size (single memory)")
# Cache Options
parser.add_option("--caches", action="store_true")
parser.add_option("--l2cache", action="store_true")
parser.add_option("--fastmem", action="store_true")
parser.add_option("--num-dirs", type="int", default=1)
parser.add_option("--num-l2caches", type="int", default=1)
parser.add_option("--num-l3caches", type="int", default=1)
parser.add_option("--l1d_size", type="string", default="64kB")
parser.add_option("--l1i_size", type="string", default="32kB")
parser.add_option("--l2_size", type="string", default="2MB")
parser.add_option("--l3_size", type="string", default="16MB")
parser.add_option("--l1d_assoc", type="int", default=2)
parser.add_option("--l1i_assoc", type="int", default=2)
parser.add_option("--l2_assoc", type="int", default=8)
parser.add_option("--l3_assoc", type="int", default=16)
parser.add_option("--cacheline_size", type="int", default=64)
# Enable Ruby
parser.add_option("--ruby", action="store_true")
# Run duration options
parser.add_option("-m", "--abs-max-tick", type="int", default=m5.MaxTick,
metavar="TICKS", help="Run to absolute simulated tick " \
"specified including ticks from a restored checkpoint")
parser.add_option("--rel-max-tick", type="int", default=None,
metavar="TICKS", help="Simulate for specified number of" \
" ticks relative to the simulation start tick (e.g. if " \
"restoring a checkpoint)")
parser.add_option("--maxtime", type="float", default=None,
help="Run to the specified absolute simulated time in " \
"seconds")
parser.add_option("-I", "--maxinsts", action="store", type="int",
default=None, help="""Total number of instructions to
simulate (default: run forever)""")
parser.add_option("--work-item-id", action="store", type="int",
help="the specific work id for exit & checkpointing")
parser.add_option("--work-begin-cpu-id-exit", action="store", type="int",
help="exit when work starts on the specified cpu")
parser.add_option("--work-end-exit-count", action="store", type="int",
help="exit at specified work end count")
parser.add_option("--work-begin-exit-count", action="store", type="int",
help="exit at specified work begin count")
parser.add_option("--init-param", action="store", type="int", default=0,
help="""Parameter available in simulation with m5
initparam""")
# Simpoint options
parser.add_option("--simpoint-profile", action="store_true",
help="Enable basic block profiling for SimPoints")
parser.add_option("--simpoint-interval", type="int", default=10000000,
help="SimPoint interval in num of instructions")
# Checkpointing options
###Note that performing checkpointing via python script files will override
###checkpoint instructions built into binaries.
parser.add_option("--take-checkpoints", action="store", type="string",
help="<M,N> take checkpoints at tick M and every N ticks thereafter")
parser.add_option("--max-checkpoints", action="store", type="int",
help="the maximum number of checkpoints to drop", default=5)
parser.add_option("--checkpoint-dir", action="store", type="string",
help="Place all checkpoints in this absolute directory")
parser.add_option("-r", "--checkpoint-restore", action="store", type="int",
help="restore from checkpoint <N>")
parser.add_option("--checkpoint-at-end", action="store_true",
help="take a checkpoint at end of run")
parser.add_option("--work-begin-checkpoint-count", action="store", type="int",
help="checkpoint at specified work begin count")
parser.add_option("--work-end-checkpoint-count", action="store", type="int",
help="checkpoint at specified work end count")
parser.add_option("--work-cpus-checkpoint-count", action="store", type="int",
help="checkpoint and exit when active cpu count is reached")
parser.add_option("--restore-with-cpu", action="store", type="choice",
default="atomic", choices=CpuConfig.cpu_names(),
help = "cpu type for restoring from a checkpoint")
# CPU Switching - default switch model goes from a checkpoint
# to a timing simple CPU with caches to warm up, then to detailed CPU for
# data measurement
parser.add_option("--repeat-switch", action="store", type="int",
default=None,
help="switch back and forth between CPUs with period <N>")
parser.add_option("-s", "--standard-switch", action="store", type="int",
default=None,
help="switch from timing to Detailed CPU after warmup period of <N>")
parser.add_option("-p", "--prog-interval", type="str",
help="CPU Progress Interval")
# Fastforwarding and simpoint related materials
parser.add_option("-W", "--warmup-insts", action="store", type="int",
default=None,
help="Warmup period in total instructions (requires --standard-switch)")
parser.add_option("--bench", action="store", type="string", default=None,
help="base names for --take-checkpoint and --checkpoint-restore")
parser.add_option("-F", "--fast-forward", action="store", type="string",
default=None,
help="Number of instructions to fast forward before switching")
parser.add_option("-S", "--simpoint", action="store_true", default=False,
help="""Use workload simpoints as an instruction offset for
--checkpoint-restore or --take-checkpoint.""")
parser.add_option("--at-instruction", action="store_true", default=False,
help="""Treat value of --checkpoint-restore or --take-checkpoint as a
number of instructions.""")
def addSEOptions(parser):
# Benchmark options
parser.add_option("-c", "--cmd", default="",
help="The binary to run in syscall emulation mode.")
parser.add_option("-o", "--options", default="",
help="""The options to pass to the binary, use " "
around the entire string""")
parser.add_option("-i", "--input", default="",
help="Read stdin from a file.")
parser.add_option("--output", default="",
help="Redirect stdout to a file.")
parser.add_option("--errout", default="",
help="Redirect stderr to a file.")
def addFSOptions(parser):
# Simulation options
parser.add_option("--timesync", action="store_true",
help="Prevent simulated time from getting ahead of real time")
# System options
parser.add_option("--kernel", action="store", type="string")
parser.add_option("--script", action="store", type="string")
parser.add_option("--frame-capture", action="store_true",
help="Stores changed frame buffers from the VNC server to compressed "\
"files in the gem5 output directory")
if buildEnv['TARGET_ISA'] == "arm":
parser.add_option("--bare-metal", action="store_true",
help="Provide the raw system without the linux specific bits")
parser.add_option("--machine-type", action="store", type="choice",
choices=ArmMachineType.map.keys(), default="RealView_PBX")
parser.add_option("--dtb-filename", action="store", type="string",
help="Specifies device tree blob file to use with device-tree-"\
"enabled kernels")
parser.add_option("--enable-context-switch-stats-dump", \
action="store_true", help="Enable stats dump at context "\
"switches and dump tasks file (required for Streamline)")
# Benchmark options
parser.add_option("--dual", action="store_true",
help="Simulate two systems attached with an ethernet link")
parser.add_option("-b", "--benchmark", action="store", type="string",
dest="benchmark",
help="Specify the benchmark to run. Available benchmarks: %s"\
% DefinedBenchmarks)
# Metafile options
parser.add_option("--etherdump", action="store", type="string", dest="etherdump",
help="Specify the filename to dump a pcap capture of the" \
"ethernet traffic")
# Disk Image Options
parser.add_option("--disk-image", action="store", type="string", default=None,
help="Path to the disk image to use.")
Reference in a new issue View git blame Copy permalink