gem5/dev/uart.cc
Nathan Binkert 425dda00df Macros are nasty, so let's get rid of them. Convert all
all macros in ev5.hh to inline functions or constant typed
variables and make them follow our style while we're at it.

All of the stuff in this file actually belongs in the ISA
traits code, but this is a first step at getting things done
in the right manner.

arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
arch/alpha/ev5.cc:
arch/alpha/isa_desc:
dev/ns_gige.cc:
kern/tru64/tru64_events.cc:
    deal with changes in ev5.hh
arch/alpha/ev5.hh:
    Macros are nasty, so let's get rid of them.  Convert all
    all macros to inline functions or constant typed variables.
    Make them follow our style while we're at it.

    All of the stuff in this file actually belongs in the ISA
    traits code, but this is a first step at getting things done
    in the right manner.
arch/alpha/isa_traits.hh:
    move some of the ev5 specific code into the isa
arch/alpha/vtophys.cc:
base/remote_gdb.cc:
    deal with isa addition
cpu/exec_context.hh:
    be less isa specific and use the isa traits to figure out
    what we can.
dev/alpha_console.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart.cc:
    deal with changes in ev5.hh
    I don't believe this masking is actually necessary.  We should
    look at removing it later.
dev/ide_ctrl.cc:
    sort #includes
    deal with changes in ev5.hh

--HG--
extra : convert_revision : c8a3adf0a4b1d198aefe38fc38b295abf289b08a
2004-11-13 14:01:38 -05:00

460 lines
13 KiB
C++

/*
* Copyright (c) 2004 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* @file
* Implements a 8250 UART
*/
#include <string>
#include <vector>
#include "base/inifile.hh"
#include "base/str.hh" // for to_number
#include "base/trace.hh"
#include "dev/simconsole.hh"
#include "dev/uart.hh"
#include "dev/platform.hh"
#include "mem/bus/bus.hh"
#include "mem/bus/pio_interface.hh"
#include "mem/bus/pio_interface_impl.hh"
#include "mem/functional_mem/memory_control.hh"
#include "sim/builder.hh"
using namespace std;
Uart::IntrEvent::IntrEvent(Uart *u, int bit)
: Event(&mainEventQueue), uart(u)
{
DPRINTF(Uart, "UART Interrupt Event Initilizing\n");
intrBit = bit;
}
const char *
Uart::IntrEvent::description()
{
return "uart interrupt delay event";
}
void
Uart::IntrEvent::process()
{
if (intrBit & uart->IER) {
DPRINTF(Uart, "UART InterEvent, interrupting\n");
uart->platform->postConsoleInt();
uart->status |= intrBit;
}
else
DPRINTF(Uart, "UART InterEvent, not interrupting\n");
}
void
Uart::IntrEvent::scheduleIntr()
{
DPRINTF(Uart, "Scheduling IER interrupt for %#x, at cycle %lld\n", intrBit,
curTick + (ticksPerSecond/2000) * 350);
if (!scheduled())
/* @todo Make this cleaner, will be much easier with
* nanosecond time everywhere. Hint hint Nate. */
schedule(curTick + (ticksPerSecond/2000000000) * 450);
else
reschedule(curTick + (ticksPerSecond/2000000000) * 450);
}
Uart::Uart(const string &name, SimConsole *c, MemoryController *mmu, Addr a,
Addr s, HierParams *hier, Bus *bus, Tick pio_latency, Platform *p)
: PioDevice(name), addr(a), size(s), cons(c), txIntrEvent(this, TX_INT),
rxIntrEvent(this, RX_INT), platform(p)
{
mmu->add_child(this, RangeSize(addr, size));
if (bus) {
pioInterface = newPioInterface(name, hier, bus, this,
&Uart::cacheAccess);
pioInterface->addAddrRange(RangeSize(addr, size));
pioLatency = pio_latency * bus->clockRatio;
}
readAddr = 0;
IER = 0;
DLAB = 0;
LCR = 0;
MCR = 0;
status = 0;
// set back pointers
cons->uart = this;
platform->uart = this;
}
Fault
Uart::read(MemReqPtr &req, uint8_t *data)
{
Addr daddr = req->paddr - (addr & EV5::PAddrImplMask);
DPRINTF(Uart, " read register %#x\n", daddr);
#ifdef ALPHA_TLASER
switch (req->size) {
case sizeof(uint64_t):
*(uint64_t *)data = 0;
break;
case sizeof(uint32_t):
*(uint32_t *)data = 0;
break;
case sizeof(uint16_t):
*(uint16_t *)data = 0;
break;
case sizeof(uint8_t):
*(uint8_t *)data = 0;
break;
}
switch (daddr) {
case 0x80: // Status Register
if (readAddr == 3) {
readAddr = 0;
if (status & TX_INT)
*data = (1 << 4);
else if (status & RX_INT)
*data = (1 << 5);
else
DPRINTF(Uart, "spurious read\n");
} else {
*data = (1 << 2);
if (status & RX_INT)
*data |= (1 << 0);
}
break;
case 0xc0: // Data register (RX)
if (!cons->dataAvailable())
panic("No data to read");
cons->in(*data);
if (!cons->dataAvailable()) {
platform->clearConsoleInt();
status &= ~RX_INT;
}
DPRINTF(Uart, "read data register \'%c\' %2x\n",
isprint(*data) ? *data : ' ', *data);
break;
}
#else
assert(req->size == 1);
switch (daddr) {
case 0x0:
if (!(LCR & 0x80)) { // read byte
if (cons->dataAvailable())
cons->in(*data);
else {
*(uint8_t*)data = 0;
// A limited amount of these are ok.
DPRINTF(Uart, "empty read of RX register\n");
}
status &= ~RX_INT;
platform->clearConsoleInt();
if (cons->dataAvailable() && (IER & UART_IER_RDI))
rxIntrEvent.scheduleIntr();
} else { // dll divisor latch
;
}
break;
case 0x1:
if (!(LCR & 0x80)) { // Intr Enable Register(IER)
*(uint8_t*)data = IER;
} else { // DLM divisor latch MSB
;
}
break;
case 0x2: // Intr Identification Register (IIR)
DPRINTF(Uart, "IIR Read, status = %#x\n", (uint32_t)status);
if (status)
*(uint8_t*)data = 0;
else
*(uint8_t*)data = 1;
break;
case 0x3: // Line Control Register (LCR)
*(uint8_t*)data = LCR;
break;
case 0x4: // Modem Control Register (MCR)
break;
case 0x5: // Line Status Register (LSR)
uint8_t lsr;
lsr = 0;
// check if there are any bytes to be read
if (cons->dataAvailable())
lsr = UART_LSR_DR;
lsr |= UART_LSR_TEMT | UART_LSR_THRE;
*(uint8_t*)data = lsr;
break;
case 0x6: // Modem Status Register (MSR)
*(uint8_t*)data = 0;
break;
case 0x7: // Scratch Register (SCR)
*(uint8_t*)data = 0; // doesn't exist with at 8250.
break;
default:
panic("Tried to access a UART port that doesn't exist\n");
break;
}
#endif
return No_Fault;
}
Fault
Uart::write(MemReqPtr &req, const uint8_t *data)
{
Addr daddr = req->paddr - (addr & EV5::PAddrImplMask);
DPRINTF(Uart, " write register %#x value %#x\n", daddr, *(uint8_t*)data);
#ifdef ALPHA_TLASER
switch (daddr) {
case 0x80:
readAddr = *data;
switch (*data) {
case 0x28: // Ack of TX
if ((status & TX_INT) == 0)
panic("Ack of transmit, though there was no interrupt");
status &= ~TX_INT;
platform->clearConsoleInt();
break;
case 0x00:
case 0x01:
case 0x03: // going to read RR3
case 0x12:
break;
default:
DPRINTF(Uart, "writing status register %#x \n",
*(uint64_t *)data);
break;
}
break;
case 0xc0: // Data register (TX)
cons->out(*(uint64_t *)data);
platform->postConsoleInt();
status |= TX_INT;
break;
}
#else
switch (daddr) {
case 0x0:
if (!(LCR & 0x80)) { // write byte
cons->out(*(uint8_t *)data);
platform->clearConsoleInt();
status &= ~TX_INT;
if (UART_IER_THRI & IER)
txIntrEvent.scheduleIntr();
} else { // dll divisor latch
;
}
break;
case 0x1:
if (!(LCR & 0x80)) { // Intr Enable Register(IER)
IER = *(uint8_t*)data;
if (UART_IER_THRI & IER)
{
DPRINTF(Uart, "IER: IER_THRI set, scheduling TX intrrupt\n");
txIntrEvent.scheduleIntr();
}
else
{
DPRINTF(Uart, "IER: IER_THRI cleared, descheduling TX intrrupt\n");
if (txIntrEvent.scheduled())
txIntrEvent.deschedule();
if (status & TX_INT)
platform->clearConsoleInt();
status &= ~TX_INT;
}
if ((UART_IER_RDI & IER) && cons->dataAvailable()) {
DPRINTF(Uart, "IER: IER_RDI set, scheduling RX intrrupt\n");
rxIntrEvent.scheduleIntr();
} else {
DPRINTF(Uart, "IER: IER_RDI cleared, descheduling RX intrrupt\n");
if (rxIntrEvent.scheduled())
rxIntrEvent.deschedule();
if (status & RX_INT)
platform->clearConsoleInt();
status &= ~RX_INT;
}
} else { // DLM divisor latch MSB
;
}
break;
case 0x2: // FIFO Control Register (FCR)
break;
case 0x3: // Line Control Register (LCR)
LCR = *(uint8_t*)data;
break;
case 0x4: // Modem Control Register (MCR)
if (*(uint8_t*)data == (UART_MCR_LOOP | 0x0A))
MCR = 0x9A;
break;
case 0x7: // Scratch Register (SCR)
// We are emulating a 8250 so we don't have a scratch reg
break;
default:
panic("Tried to access a UART port that doesn't exist\n");
break;
}
#endif
return No_Fault;
}
void
Uart::dataAvailable()
{
#ifdef ALPHA_TLASER
platform->postConsoleInt();
status |= RX_INT;
#else
// if the kernel wants an interrupt when we have data
if (IER & UART_IER_RDI)
{
platform->postConsoleInt();
status |= RX_INT;
}
#endif
}
Tick
Uart::cacheAccess(MemReqPtr &req)
{
return curTick + pioLatency;
}
void
Uart::serialize(ostream &os)
{
#ifdef ALPHA_TLASER
SERIALIZE_SCALAR(readAddr);
SERIALIZE_SCALAR(status);
#else
SERIALIZE_SCALAR(status);
SERIALIZE_SCALAR(IER);
SERIALIZE_SCALAR(DLAB);
SERIALIZE_SCALAR(LCR);
SERIALIZE_SCALAR(MCR);
Tick rxintrwhen;
if (rxIntrEvent.scheduled())
rxintrwhen = rxIntrEvent.when();
else
rxintrwhen = 0;
Tick txintrwhen;
if (txIntrEvent.scheduled())
txintrwhen = txIntrEvent.when();
else
txintrwhen = 0;
SERIALIZE_SCALAR(rxintrwhen);
SERIALIZE_SCALAR(txintrwhen);
#endif
}
void
Uart::unserialize(Checkpoint *cp, const std::string &section)
{
#ifdef ALPHA_TLASER
UNSERIALIZE_SCALAR(readAddr);
UNSERIALIZE_SCALAR(status);
#else
UNSERIALIZE_SCALAR(status);
UNSERIALIZE_SCALAR(IER);
UNSERIALIZE_SCALAR(DLAB);
UNSERIALIZE_SCALAR(LCR);
UNSERIALIZE_SCALAR(MCR);
Tick rxintrwhen;
Tick txintrwhen;
UNSERIALIZE_SCALAR(rxintrwhen);
UNSERIALIZE_SCALAR(txintrwhen);
if (rxintrwhen != 0)
rxIntrEvent.schedule(rxintrwhen);
if (txintrwhen != 0)
txIntrEvent.schedule(txintrwhen);
#endif
}
BEGIN_DECLARE_SIM_OBJECT_PARAMS(Uart)
SimObjectParam<SimConsole *> console;
SimObjectParam<MemoryController *> mmu;
SimObjectParam<Platform *> platform;
Param<Addr> addr;
Param<Addr> size;
SimObjectParam<Bus*> io_bus;
Param<Tick> pio_latency;
SimObjectParam<HierParams *> hier;
END_DECLARE_SIM_OBJECT_PARAMS(Uart)
BEGIN_INIT_SIM_OBJECT_PARAMS(Uart)
INIT_PARAM(console, "The console"),
INIT_PARAM(mmu, "Memory Controller"),
INIT_PARAM(platform, "Pointer to platfrom"),
INIT_PARAM(addr, "Device Address"),
INIT_PARAM_DFLT(size, "Device size", 0x8),
INIT_PARAM_DFLT(io_bus, "The IO Bus to attach to", NULL),
INIT_PARAM_DFLT(pio_latency, "Programmed IO latency in bus cycles", 1),
INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)
END_INIT_SIM_OBJECT_PARAMS(Uart)
CREATE_SIM_OBJECT(Uart)
{
return new Uart(getInstanceName(), console, mmu, addr, size, hier, io_bus,
pio_latency, platform);
}
REGISTER_SIM_OBJECT("Uart", Uart)