gem5/configs/ruby/MESI_Two_Level.py
Nilay Vaish 7e27860ef4 ruby: route all packets through ruby port
Currently, the interrupt controller in x86 is connected to the io bus
directly.  Therefore the packets between the io devices and the interrupt
controller do not go through ruby.  This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination.  Note that the patch does not make these packets go through the
ruby network.  That would happen in a subsequent patch.
2014-02-23 19:16:16 -06:00

199 lines
7.8 KiB
Python

# Copyright (c) 2006-2007 The Regents of The University of Michigan
# Copyright (c) 2009 Advanced Micro Devices, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Brad Beckmann
import math
import m5
from m5.objects import *
from m5.defines import buildEnv
from Ruby import create_topology
#
# Note: the L1 Cache latency is only used by the sequencer on fast path hits
#
class L1Cache(RubyCache):
latency = 3
#
# Note: the L2 Cache latency is not currently used
#
class L2Cache(RubyCache):
latency = 15
def define_options(parser):
return
def create_system(options, system, piobus, dma_ports, ruby_system):
if buildEnv['PROTOCOL'] != 'MESI_Two_Level':
fatal("This script requires the MESI_Two_Level protocol to be built.")
cpu_sequencers = []
#
# The ruby network creation expects the list of nodes in the system to be
# consistent with the NetDest list. Therefore the l1 controller nodes must be
# listed before the directory nodes and directory nodes before dma nodes, etc.
#
l1_cntrl_nodes = []
l2_cntrl_nodes = []
dir_cntrl_nodes = []
dma_cntrl_nodes = []
#
# Must create the individual controllers before the network to ensure the
# controller constructors are called before the network constructor
#
l2_bits = int(math.log(options.num_l2caches, 2))
block_size_bits = int(math.log(options.cacheline_size, 2))
for i in xrange(options.num_cpus):
#
# First create the Ruby objects associated with this cpu
#
l1i_cache = L1Cache(size = options.l1i_size,
assoc = options.l1i_assoc,
start_index_bit = block_size_bits,
is_icache = True)
l1d_cache = L1Cache(size = options.l1d_size,
assoc = options.l1d_assoc,
start_index_bit = block_size_bits,
is_icache = False)
prefetcher = RubyPrefetcher.Prefetcher()
l1_cntrl = L1Cache_Controller(version = i,
L1Icache = l1i_cache,
L1Dcache = l1d_cache,
l2_select_num_bits = l2_bits,
send_evictions = (
options.cpu_type == "detailed"),
prefetcher = prefetcher,
ruby_system = ruby_system,
transitions_per_cycle=options.ports,
enable_prefetch = False)
cpu_seq = RubySequencer(version = i,
icache = l1i_cache,
dcache = l1d_cache,
ruby_system = ruby_system)
l1_cntrl.sequencer = cpu_seq
if piobus != None:
cpu_seq.pio_master_port = piobus.slave
cpu_seq.mem_master_port = piobus.slave
cpu_seq.pio_slave_port = piobus.master
exec("ruby_system.l1_cntrl%d = l1_cntrl" % i)
#
# Add controllers and sequencers to the appropriate lists
#
cpu_sequencers.append(cpu_seq)
l1_cntrl_nodes.append(l1_cntrl)
l2_index_start = block_size_bits + l2_bits
for i in xrange(options.num_l2caches):
#
# First create the Ruby objects associated with this cpu
#
l2_cache = L2Cache(size = options.l2_size,
assoc = options.l2_assoc,
start_index_bit = l2_index_start)
l2_cntrl = L2Cache_Controller(version = i,
L2cache = l2_cache,
transitions_per_cycle=options.ports,
ruby_system = ruby_system)
exec("ruby_system.l2_cntrl%d = l2_cntrl" % i)
l2_cntrl_nodes.append(l2_cntrl)
phys_mem_size = sum(map(lambda r: r.size(), system.mem_ranges))
assert(phys_mem_size % options.num_dirs == 0)
mem_module_size = phys_mem_size / options.num_dirs
# Run each of the ruby memory controllers at a ratio of the frequency of
# the ruby system
# clk_divider value is a fix to pass regression.
ruby_system.memctrl_clk_domain = DerivedClockDomain(
clk_domain=ruby_system.clk_domain,
clk_divider=3)
for i in xrange(options.num_dirs):
#
# Create the Ruby objects associated with the directory controller
#
mem_cntrl = RubyMemoryControl(
clk_domain = ruby_system.memctrl_clk_domain,
version = i,
ruby_system = ruby_system)
dir_size = MemorySize('0B')
dir_size.value = mem_module_size
dir_cntrl = Directory_Controller(version = i,
directory = \
RubyDirectoryMemory(version = i,
size = dir_size,
use_map =
options.use_map),
memBuffer = mem_cntrl,
transitions_per_cycle = options.ports,
ruby_system = ruby_system)
exec("ruby_system.dir_cntrl%d = dir_cntrl" % i)
dir_cntrl_nodes.append(dir_cntrl)
for i, dma_port in enumerate(dma_ports):
#
# Create the Ruby objects associated with the dma controller
#
dma_seq = DMASequencer(version = i,
ruby_system = ruby_system)
dma_cntrl = DMA_Controller(version = i,
dma_sequencer = dma_seq,
transitions_per_cycle = options.ports,
ruby_system = ruby_system)
exec("ruby_system.dma_cntrl%d = dma_cntrl" % i)
exec("ruby_system.dma_cntrl%d.dma_sequencer.slave = dma_port" % i)
dma_cntrl_nodes.append(dma_cntrl)
all_cntrls = l1_cntrl_nodes + \
l2_cntrl_nodes + \
dir_cntrl_nodes + \
dma_cntrl_nodes
topology = create_topology(all_cntrls, options)
return (cpu_sequencers, dir_cntrl_nodes, topology)