07ce60bdfa
In case /dev/sda1 is not actually the boot partition for an image, we can override it on the command line or in a benchmark definition.
343 lines
13 KiB
Python
343 lines
13 KiB
Python
# Copyright (c) 2010-2013 ARM Limited
|
|
# All rights reserved.
|
|
#
|
|
# The license below extends only to copyright in the software and shall
|
|
# not be construed as granting a license to any other intellectual
|
|
# property including but not limited to intellectual property relating
|
|
# to a hardware implementation of the functionality of the software
|
|
# licensed hereunder. You may use the software subject to the license
|
|
# terms below provided that you ensure that this notice is replicated
|
|
# unmodified and in its entirety in all distributions of the software,
|
|
# modified or unmodified, in source code or in binary form.
|
|
#
|
|
# Copyright (c) 2012-2014 Mark D. Hill and David A. Wood
|
|
# Copyright (c) 2009-2011 Advanced Micro Devices, Inc.
|
|
# Copyright (c) 2006-2007 The Regents of The University of Michigan
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions are
|
|
# met: redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer;
|
|
# redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution;
|
|
# neither the name of the copyright holders nor the names of its
|
|
# contributors may be used to endorse or promote products derived from
|
|
# this software without specific prior written permission.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
#
|
|
# Authors: Ali Saidi
|
|
# Brad Beckmann
|
|
|
|
import optparse
|
|
import sys
|
|
|
|
import m5
|
|
from m5.defines import buildEnv
|
|
from m5.objects import *
|
|
from m5.util import addToPath, fatal
|
|
|
|
addToPath('../common')
|
|
addToPath('../ruby')
|
|
|
|
import Ruby
|
|
|
|
from FSConfig import *
|
|
from SysPaths import *
|
|
from Benchmarks import *
|
|
import Simulation
|
|
import CacheConfig
|
|
import MemConfig
|
|
from Caches import *
|
|
import Options
|
|
|
|
|
|
# Check if KVM support has been enabled, we might need to do VM
|
|
# configuration if that's the case.
|
|
have_kvm_support = 'BaseKvmCPU' in globals()
|
|
def is_kvm_cpu(cpu_class):
|
|
return have_kvm_support and cpu_class != None and \
|
|
issubclass(cpu_class, BaseKvmCPU)
|
|
|
|
def cmd_line_template():
|
|
if options.command_line and options.command_line_file:
|
|
print "Error: --command-line and --command-line-file are " \
|
|
"mutually exclusive"
|
|
sys.exit(1)
|
|
if options.command_line:
|
|
return options.command_line
|
|
if options.command_line_file:
|
|
return open(options.command_line_file).read().strip()
|
|
return None
|
|
|
|
def build_test_system(np):
|
|
cmdline = cmd_line_template()
|
|
if buildEnv['TARGET_ISA'] == "alpha":
|
|
test_sys = makeLinuxAlphaSystem(test_mem_mode, bm[0], options.ruby,
|
|
cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == "mips":
|
|
test_sys = makeLinuxMipsSystem(test_mem_mode, bm[0], cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == "sparc":
|
|
test_sys = makeSparcSystem(test_mem_mode, bm[0], cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == "x86":
|
|
test_sys = makeLinuxX86System(test_mem_mode, options.num_cpus, bm[0],
|
|
options.ruby, cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == "arm":
|
|
test_sys = makeArmSystem(test_mem_mode, options.machine_type,
|
|
options.num_cpus, bm[0], options.dtb_filename,
|
|
bare_metal=options.bare_metal,
|
|
cmdline=cmdline)
|
|
if options.enable_context_switch_stats_dump:
|
|
test_sys.enable_context_switch_stats_dump = True
|
|
else:
|
|
fatal("Incapable of building %s full system!", buildEnv['TARGET_ISA'])
|
|
|
|
# Set the cache line size for the entire system
|
|
test_sys.cache_line_size = options.cacheline_size
|
|
|
|
# Create a top-level voltage domain
|
|
test_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
|
|
|
|
# Create a source clock for the system and set the clock period
|
|
test_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
|
|
voltage_domain = test_sys.voltage_domain)
|
|
|
|
# Create a CPU voltage domain
|
|
test_sys.cpu_voltage_domain = VoltageDomain()
|
|
|
|
# Create a source clock for the CPUs and set the clock period
|
|
test_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
|
|
voltage_domain =
|
|
test_sys.cpu_voltage_domain)
|
|
|
|
if options.kernel is not None:
|
|
test_sys.kernel = binary(options.kernel)
|
|
|
|
if options.script is not None:
|
|
test_sys.readfile = options.script
|
|
|
|
if options.lpae:
|
|
test_sys.have_lpae = True
|
|
|
|
if options.virtualisation:
|
|
test_sys.have_virtualization = True
|
|
|
|
test_sys.init_param = options.init_param
|
|
|
|
# For now, assign all the CPUs to the same clock domain
|
|
test_sys.cpu = [TestCPUClass(clk_domain=test_sys.cpu_clk_domain, cpu_id=i)
|
|
for i in xrange(np)]
|
|
|
|
if is_kvm_cpu(TestCPUClass) or is_kvm_cpu(FutureClass):
|
|
test_sys.vm = KvmVM()
|
|
|
|
if options.ruby:
|
|
# Check for timing mode because ruby does not support atomic accesses
|
|
if not (options.cpu_type == "detailed" or options.cpu_type == "timing"):
|
|
print >> sys.stderr, "Ruby requires TimingSimpleCPU or O3CPU!!"
|
|
sys.exit(1)
|
|
|
|
Ruby.create_system(options, True, test_sys, test_sys.iobus,
|
|
test_sys._dma_ports)
|
|
|
|
# Create a seperate clock domain for Ruby
|
|
test_sys.ruby.clk_domain = SrcClockDomain(clock = options.ruby_clock,
|
|
voltage_domain = test_sys.voltage_domain)
|
|
|
|
# Connect the ruby io port to the PIO bus,
|
|
# assuming that there is just one such port.
|
|
test_sys.iobus.master = test_sys.ruby._io_port.slave
|
|
|
|
for (i, cpu) in enumerate(test_sys.cpu):
|
|
#
|
|
# Tie the cpu ports to the correct ruby system ports
|
|
#
|
|
cpu.clk_domain = test_sys.cpu_clk_domain
|
|
cpu.createThreads()
|
|
cpu.createInterruptController()
|
|
|
|
cpu.icache_port = test_sys.ruby._cpu_ports[i].slave
|
|
cpu.dcache_port = test_sys.ruby._cpu_ports[i].slave
|
|
|
|
if buildEnv['TARGET_ISA'] == "x86":
|
|
cpu.itb.walker.port = test_sys.ruby._cpu_ports[i].slave
|
|
cpu.dtb.walker.port = test_sys.ruby._cpu_ports[i].slave
|
|
|
|
cpu.interrupts.pio = test_sys.ruby._cpu_ports[i].master
|
|
cpu.interrupts.int_master = test_sys.ruby._cpu_ports[i].slave
|
|
cpu.interrupts.int_slave = test_sys.ruby._cpu_ports[i].master
|
|
|
|
else:
|
|
if options.caches or options.l2cache:
|
|
# By default the IOCache runs at the system clock
|
|
test_sys.iocache = IOCache(addr_ranges = test_sys.mem_ranges)
|
|
test_sys.iocache.cpu_side = test_sys.iobus.master
|
|
test_sys.iocache.mem_side = test_sys.membus.slave
|
|
else:
|
|
test_sys.iobridge = Bridge(delay='50ns', ranges = test_sys.mem_ranges)
|
|
test_sys.iobridge.slave = test_sys.iobus.master
|
|
test_sys.iobridge.master = test_sys.membus.slave
|
|
|
|
# Sanity check
|
|
if options.fastmem:
|
|
if TestCPUClass != AtomicSimpleCPU:
|
|
fatal("Fastmem can only be used with atomic CPU!")
|
|
if (options.caches or options.l2cache):
|
|
fatal("You cannot use fastmem in combination with caches!")
|
|
|
|
if options.simpoint_profile:
|
|
if not options.fastmem:
|
|
# Atomic CPU checked with fastmem option already
|
|
fatal("SimPoint generation should be done with atomic cpu and fastmem")
|
|
if np > 1:
|
|
fatal("SimPoint generation not supported with more than one CPUs")
|
|
|
|
for i in xrange(np):
|
|
if options.fastmem:
|
|
test_sys.cpu[i].fastmem = True
|
|
if options.simpoint_profile:
|
|
test_sys.cpu[i].addSimPointProbe(options.simpoint_interval)
|
|
if options.checker:
|
|
test_sys.cpu[i].addCheckerCpu()
|
|
test_sys.cpu[i].createThreads()
|
|
|
|
CacheConfig.config_cache(options, test_sys)
|
|
MemConfig.config_mem(options, test_sys)
|
|
|
|
return test_sys
|
|
|
|
def build_drive_system(np):
|
|
# driver system CPU is always simple, so is the memory
|
|
# Note this is an assignment of a class, not an instance.
|
|
DriveCPUClass = AtomicSimpleCPU
|
|
drive_mem_mode = 'atomic'
|
|
DriveMemClass = SimpleMemory
|
|
|
|
cmdline = cmd_line_template()
|
|
if buildEnv['TARGET_ISA'] == 'alpha':
|
|
drive_sys = makeLinuxAlphaSystem(drive_mem_mode, bm[1], cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == 'mips':
|
|
drive_sys = makeLinuxMipsSystem(drive_mem_mode, bm[1], cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == 'sparc':
|
|
drive_sys = makeSparcSystem(drive_mem_mode, bm[1], cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == 'x86':
|
|
drive_sys = makeLinuxX86System(drive_mem_mode, np, bm[1],
|
|
cmdline=cmdline)
|
|
elif buildEnv['TARGET_ISA'] == 'arm':
|
|
drive_sys = makeArmSystem(drive_mem_mode, options.machine_type, np,
|
|
bm[1], options.dtb_filename, cmdline=cmdline)
|
|
|
|
# Create a top-level voltage domain
|
|
drive_sys.voltage_domain = VoltageDomain(voltage = options.sys_voltage)
|
|
|
|
# Create a source clock for the system and set the clock period
|
|
drive_sys.clk_domain = SrcClockDomain(clock = options.sys_clock,
|
|
voltage_domain = drive_sys.voltage_domain)
|
|
|
|
# Create a CPU voltage domain
|
|
drive_sys.cpu_voltage_domain = VoltageDomain()
|
|
|
|
# Create a source clock for the CPUs and set the clock period
|
|
drive_sys.cpu_clk_domain = SrcClockDomain(clock = options.cpu_clock,
|
|
voltage_domain =
|
|
drive_sys.cpu_voltage_domain)
|
|
|
|
drive_sys.cpu = DriveCPUClass(clk_domain=drive_sys.cpu_clk_domain,
|
|
cpu_id=0)
|
|
drive_sys.cpu.createThreads()
|
|
drive_sys.cpu.createInterruptController()
|
|
drive_sys.cpu.connectAllPorts(drive_sys.membus)
|
|
if options.fastmem:
|
|
drive_sys.cpu.fastmem = True
|
|
if options.kernel is not None:
|
|
drive_sys.kernel = binary(options.kernel)
|
|
|
|
if is_kvm_cpu(DriveCPUClass):
|
|
drive_sys.vm = KvmVM()
|
|
|
|
drive_sys.iobridge = Bridge(delay='50ns',
|
|
ranges = drive_sys.mem_ranges)
|
|
drive_sys.iobridge.slave = drive_sys.iobus.master
|
|
drive_sys.iobridge.master = drive_sys.membus.slave
|
|
|
|
# Create the appropriate memory controllers and connect them to the
|
|
# memory bus
|
|
drive_sys.mem_ctrls = [DriveMemClass(range = r)
|
|
for r in drive_sys.mem_ranges]
|
|
for i in xrange(len(drive_sys.mem_ctrls)):
|
|
drive_sys.mem_ctrls[i].port = drive_sys.membus.master
|
|
|
|
drive_sys.init_param = options.init_param
|
|
|
|
return drive_sys
|
|
|
|
# Add options
|
|
parser = optparse.OptionParser()
|
|
Options.addCommonOptions(parser)
|
|
Options.addFSOptions(parser)
|
|
|
|
# Add the ruby specific and protocol specific options
|
|
if '--ruby' in sys.argv:
|
|
Ruby.define_options(parser)
|
|
|
|
(options, args) = parser.parse_args()
|
|
|
|
if args:
|
|
print "Error: script doesn't take any positional arguments"
|
|
sys.exit(1)
|
|
|
|
# system under test can be any CPU
|
|
(TestCPUClass, test_mem_mode, FutureClass) = Simulation.setCPUClass(options)
|
|
|
|
# Match the memories with the CPUs, based on the options for the test system
|
|
TestMemClass = Simulation.setMemClass(options)
|
|
|
|
if options.benchmark:
|
|
try:
|
|
bm = Benchmarks[options.benchmark]
|
|
except KeyError:
|
|
print "Error benchmark %s has not been defined." % options.benchmark
|
|
print "Valid benchmarks are: %s" % DefinedBenchmarks
|
|
sys.exit(1)
|
|
else:
|
|
if options.dual:
|
|
bm = [SysConfig(disk=options.disk_image, rootdev=options.root_device,
|
|
mem=options.mem_size),
|
|
SysConfig(disk=options.disk_image, rootdev=options.root_device,
|
|
mem=options.mem_size)]
|
|
else:
|
|
bm = [SysConfig(disk=options.disk_image, rootdev=options.root_device,
|
|
mem=options.mem_size)]
|
|
|
|
np = options.num_cpus
|
|
|
|
test_sys = build_test_system(np)
|
|
if len(bm) == 2:
|
|
drive_sys = build_drive_system(np)
|
|
root = makeDualRoot(True, test_sys, drive_sys, options.etherdump)
|
|
elif len(bm) == 1:
|
|
root = Root(full_system=True, system=test_sys)
|
|
else:
|
|
print "Error I don't know how to create more than 2 systems."
|
|
sys.exit(1)
|
|
|
|
if options.timesync:
|
|
root.time_sync_enable = True
|
|
|
|
if options.frame_capture:
|
|
VncServer.frame_capture = True
|
|
|
|
Simulation.setWorkCountOptions(test_sys, options)
|
|
Simulation.run(options, root, test_sys, FutureClass)
|