gem5/build/SConstruct
Ali Saidi f4e2f0ea33 undoing change per nates request
--HG--
extra : convert_revision : c5c2fd88dfd8d893da51c2b80907260ec14a7593
2005-02-14 20:47:05 -05:00

295 lines
11 KiB
Python

# -*- mode:python -*-
# Copyright (c) 2004 The Regents of The University of Michigan
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
###################################################
#
# SCons top-level build description (SConstruct) file.
#
# To build M5, you need a directory with three things:
# 1. A copy of this file (named SConstruct).
# 2. A link named 'm5' to the top of the M5 simulator source tree.
# 3. A link named 'ext' to the top of the M5 external source tree.
#
# Then type 'scons' to build the default configuration (see below), or
# 'scons <CONFIG>/<binary>' to build some other configuration (e.g.,
# 'KERNEL/m5.opt' for the optimized full-system version).
#
###################################################
# Python library imports
import sys
import os
# The absolute path to the current directory (where this file lives).
ROOT = Dir('.').abspath
# Paths to the M5 and external source trees (local symlinks).
SRCDIR = os.path.join(ROOT, 'm5')
EXT_SRCDIR = os.path.join(ROOT, 'ext')
# Check for 'm5' and 'ext' links, die if they don't exist.
if not os.path.isdir(SRCDIR):
print "Error: '%s' must be a link to the M5 source tree." % SRCDIR
sys.exit(1)
if not os.path.isdir('ext'):
print "Error: '%s' must be a link to the M5 external source tree." \
% EXT_SRCDIR
sys.exit(1)
###################################################
#
# Define Configurations
#
# The build system infers the build options from the subdirectory name
# that the simulator is built under. The subdirectory name must be of
# the form <CONFIG>[.<OPT>]*, where <CONFIG> is a base configuration
# (e.g., ALPHA or KERNEL) and OPT is an option (e.g., MYSQL). The
# following code defines the standard configurations and options.
# Additional local configurations and options are read from the file
# 'local_configs' if it exists.
#
# Each base configuration or option is defined in two steps: a
# function that takes an SCons build environment and modifies it
# appropriately for that config or option, and an entry in the
# 'configs_map' or 'options_map' dictionary that maps the directory
# name string to the function. (The directory names are all upper
# case, by convention.)
#
###################################################
# Base non-full-system Alpha ISA configuration.
def AlphaConfig(env):
env.Replace(TARGET_ISA = 'alpha')
env.Append(CPPDEFINES = 'SS_COMPATIBLE_FP')
# Base full-system configuration.
def KernelConfig(env):
env.Replace(TARGET_ISA = 'alpha')
env.Replace(FULL_SYSTEM = True)
env.Append(CPPDEFINES = ['FULL_SYSTEM'])
# Base configurations map.
configs_map = {
'ALPHA' : AlphaConfig,
'KERNEL' : KernelConfig
}
# Enable detailed full-system binning.
def MeasureOpt(env):
env.Replace(USE_MYSQL = True)
env.Append(CPPDEFINES = 'FS_MEASURE')
# Enable MySql database output for stats.
def MySqlOpt(env):
env.Replace(USE_MYSQL = True)
# Disable FastAlloc object allocation.
def NoFastAllocOpt(env):
env.Append(CPPDEFINES = 'NO_FAST_ALLOC')
# Configuration options map.
options_map = {
'MEASURE' : MeasureOpt,
'MYSQL' : MySqlOpt,
'NO_FAST_ALLOC' : NoFastAllocOpt
}
# The 'local_configs' file can be used to define additional base
# configurations and/or options without changing this file.
if os.path.isfile('local_configs'):
SConscript('local_configs', exports = ['configs_map', 'options_map'])
# This function parses a directory name of the form <CONFIG>[.<OPT>]*
# and sets up the build environment appropriately. Returns True if
# successful, False if the base config or any of the options were not
# defined.
def set_dir_options(dir, env):
parts = dir.split('.')
config = parts[0]
opts = parts[1:]
try:
configs_map[config](env)
map(lambda opt: options_map[opt](env), opts)
return True
except KeyError, key:
print "Config/option '%s' not found." % key
return False
# Set the default configuration and binary. The default target (if
# scons is invoked at the top level with no command-line targets) is
# 'ALPHA/m5.debug'. If scons is invoked in a subdirectory with no
# command-line targets, the configuration
###################################################
#
# Figure out which configurations to set up.
#
#
# It's prohibitive to do all the combinations of base configurations
# and options, so we have to infer which ones the user wants.
#
# 1. If there are command-line targets, the configuration(s) are inferred
# from the directories of those targets. If scons was invoked from a
# subdirectory (using 'scons -u'), those targets have to be
# interpreted relative to that subdirectory.
#
# 2. If there are no command-line targets, and scons was invoked from a
# subdirectory (using 'scons -u'), the configuration is inferred from
# the name of the subdirectory.
#
# 3. If there are no command-line targets and scons was invoked from
# the root build directory, a default configuration is used. The
# built-in default is ALPHA, but this can be overridden by setting the
# M5_DEFAULT_CONFIG shell environment veriable.
#
# In cases 2 & 3, the specific file target defaults to 'm5.debug', but
# this can be overridden by setting the M5_DEFAULT_BINARY shell
# environment veriable.
#
###################################################
# Find default configuration & binary.
default_config = os.environ.get('M5_DEFAULT_CONFIG', 'ALPHA')
default_binary = os.environ.get('M5_DEFAULT_BINARY', 'm5.debug')
# Ask SCons which directory it was invoked from. If you invoke SCons
# from a subdirectory you must use the '-u' flag.
launch_dir = GetLaunchDir()
# Build a list 'my_targets' of all the targets relative to ROOT.
if launch_dir == ROOT:
# invoked from root build dir
if len(COMMAND_LINE_TARGETS) != 0:
# easy: use specified targets as is
my_targets = COMMAND_LINE_TARGETS
else:
# default target (ALPHA/m5.debug, unless overridden)
target = os.path.join(default_config, default_binary)
my_targets = [target]
Default(target)
else:
# invoked from subdirectory
if not launch_dir.startswith(ROOT):
print "Error: launch dir (%s) not a subdirectory of ROOT (%s)!" \
(launch_dir, ROOT)
sys.exit(1)
# make launch_dir relative to ROOT (strip ROOT plus slash off front)
launch_dir = launch_dir[len(ROOT)+1:]
if len(COMMAND_LINE_TARGETS) != 0:
# make specified targets relative to ROOT
my_targets = map(lambda x: os.path.join(launch_dir, x),
COMMAND_LINE_TARGETS)
else:
# build default binary (m5.debug, unless overridden) using the
# config inferred by the invocation directory (the first
# subdirectory after ROOT)
target = os.path.join(launch_dir.split('/')[0], default_binary)
my_targets = [target]
Default(target)
# Normalize target paths (gets rid of '..' in the middle, etc.)
my_targets = map(os.path.normpath, my_targets)
# Generate a list of the unique configs that the collected targets reference.
build_dirs = []
for t in my_targets:
dir = t.split('/')[0]
if dir not in build_dirs:
build_dirs.append(dir)
###################################################
#
# Set up the default build environment. This environment is copied
# and modified according to each selected configuration.
#
###################################################
default_env = Environment(ENV = os.environ, # inherit user's enviroment vars
ROOT = ROOT,
SRCDIR = SRCDIR,
EXT_SRCDIR = EXT_SRCDIR,
CPPDEFINES = [],
FULL_SYSTEM = False,
USE_MYSQL = False)
default_env.SConsignFile("sconsign")
# For some reason, the CC and CXX variables don't get passed into the
# environment correctly. This is probably some sort of scons bug that
# will eventually be fixed.
if os.environ.has_key('CC'):
default_env.Replace(CC=os.environ['CC'])
if os.environ.has_key('CXX'):
default_env.Replace(CXX=os.environ['CXX'])
# M5_EXT is used by isa_parser.py to find the PLY package.
default_env.Append(ENV = { 'M5_EXT' : EXT_SRCDIR })
default_env.Append(CCFLAGS='-pipe')
default_env.Append(CCFLAGS='-fno-strict-aliasing')
default_env.Append(CCFLAGS=Split('-Wall -Wno-sign-compare -Werror -Wundef'))
default_env.Append(CPPPATH=[os.path.join(EXT_SRCDIR + '/dnet')])
# libelf build is described in its own SConscript file. Using a
# dictionary for exports lets us export "default_env" so the
# SConscript will see it as "env". SConscript-global is the build in
# build/libelf shared among all configs.
default_env.SConscript('m5/libelf/SConscript-global',
exports={'env' : default_env})
###################################################
#
# Define build environments for selected configurations.
#
###################################################
for build_dir in build_dirs:
# Make a copy of the default environment to use for this config.
env = default_env.Copy()
# Modify 'env' according to the build directory config.
print "Configuring options for directory '%s'." % build_dir
if not set_dir_options(build_dir, env):
print "Skipping directory '%s'." % build_dir
continue
# The m5/SConscript file sets up the build rules in 'env' according
# to the configured options.
SConscript('m5/SConscript', build_dir = build_dir, exports = 'env',
duplicate=0)
###################################################
#
# Let SCons do its thing. At this point SCons will use the defined
# build enviornments to build the requested targets.
#
###################################################