gem5/configs/ruby/Ruby.py
Nilay Vaish fe47f0a72f ruby: remove random seed
We no longer use the C library based random number generator: random().
Instead we use the C++ library provided rng.  So setting the random seed for
the RubySystem class has no effect.  Hence the variable and the corresponding
option are being dropped.
2015-09-01 15:50:33 -05:00

249 lines
9.8 KiB
Python

# Copyright (c) 2012 ARM Limited
# All rights reserved.
#
# The license below extends only to copyright in the software and shall
# not be construed as granting a license to any other intellectual
# property including but not limited to intellectual property relating
# to a hardware implementation of the functionality of the software
# licensed hereunder. You may use the software subject to the license
# terms below provided that you ensure that this notice is replicated
# unmodified and in its entirety in all distributions of the software,
# modified or unmodified, in source code or in binary form.
#
# Copyright (c) 2006-2007 The Regents of The University of Michigan
# Copyright (c) 2009 Advanced Micro Devices, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met: redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer;
# redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution;
# neither the name of the copyright holders nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# Authors: Brad Beckmann
import math
import m5
from m5.objects import *
from m5.defines import buildEnv
from m5.util import addToPath, fatal
import MemConfig
addToPath('../topologies')
def define_options(parser):
# By default, ruby uses the simple timing cpu
parser.set_defaults(cpu_type="timing")
parser.add_option("--ruby-clock", action="store", type="string",
default='2GHz',
help="Clock for blocks running at Ruby system's speed")
parser.add_option("--access-backing-store", action="store_true", default=False,
help="Should ruby maintain a second copy of memory")
# Options related to cache structure
parser.add_option("--ports", action="store", type="int", default=4,
help="used of transitions per cycle which is a proxy \
for the number of ports.")
# ruby network options
parser.add_option("--topology", type="string", default="Crossbar",
help="check configs/topologies for complete set")
parser.add_option("--mesh-rows", type="int", default=1,
help="the number of rows in the mesh topology")
parser.add_option("--garnet-network", type="choice",
choices=['fixed', 'flexible'], help="'fixed'|'flexible'")
parser.add_option("--network-fault-model", action="store_true", default=False,
help="enable network fault model: see src/mem/ruby/network/fault_model/")
# ruby mapping options
parser.add_option("--numa-high-bit", type="int", default=0,
help="high order address bit to use for numa mapping. " \
"0 = highest bit, not specified = lowest bit")
parser.add_option("--recycle-latency", type="int", default=10,
help="Recycle latency for ruby controller input buffers")
protocol = buildEnv['PROTOCOL']
exec "import %s" % protocol
eval("%s.define_options(parser)" % protocol)
def setup_memory_controllers(system, ruby, dir_cntrls, options):
ruby.block_size_bytes = options.cacheline_size
ruby.memory_size_bits = 48
block_size_bits = int(math.log(options.cacheline_size, 2))
if options.numa_high_bit:
numa_bit = options.numa_high_bit
else:
# if the numa_bit is not specified, set the directory bits as the
# lowest bits above the block offset bits, and the numa_bit as the
# highest of those directory bits
dir_bits = int(math.log(options.num_dirs, 2))
numa_bit = block_size_bits + dir_bits - 1
index = 0
mem_ctrls = []
crossbars = []
# Sets bits to be used for interleaving. Creates memory controllers
# attached to a directory controller. A separate controller is created
# for each address range as the abstract memory can handle only one
# contiguous address range as of now.
for dir_cntrl in dir_cntrls:
dir_cntrl.directory.numa_high_bit = numa_bit
crossbar = None
if len(system.mem_ranges) > 1:
crossbar = IOXBar()
crossbars.append(crossbar)
dir_cntrl.memory = crossbar.slave
for r in system.mem_ranges:
mem_ctrl = MemConfig.create_mem_ctrl(
MemConfig.get(options.mem_type), r, index, options.num_dirs,
int(math.log(options.num_dirs, 2)), options.cacheline_size)
mem_ctrls.append(mem_ctrl)
if crossbar != None:
mem_ctrl.port = crossbar.master
else:
mem_ctrl.port = dir_cntrl.memory
index += 1
system.mem_ctrls = mem_ctrls
if len(crossbars) > 0:
ruby.crossbars = crossbars
def create_topology(controllers, options):
""" Called from create_system in configs/ruby/<protocol>.py
Must return an object which is a subclass of BaseTopology
found in configs/topologies/BaseTopology.py
This is a wrapper for the legacy topologies.
"""
exec "import %s as Topo" % options.topology
topology = eval("Topo.%s(controllers)" % options.topology)
return topology
def create_system(options, full_system, system, piobus = None, dma_ports = []):
system.ruby = RubySystem()
ruby = system.ruby
# Set the network classes based on the command line options
if options.garnet_network == "fixed":
NetworkClass = GarnetNetwork_d
IntLinkClass = GarnetIntLink_d
ExtLinkClass = GarnetExtLink_d
RouterClass = GarnetRouter_d
InterfaceClass = GarnetNetworkInterface_d
elif options.garnet_network == "flexible":
NetworkClass = GarnetNetwork
IntLinkClass = GarnetIntLink
ExtLinkClass = GarnetExtLink
RouterClass = GarnetRouter
InterfaceClass = GarnetNetworkInterface
else:
NetworkClass = SimpleNetwork
IntLinkClass = SimpleIntLink
ExtLinkClass = SimpleExtLink
RouterClass = Switch
InterfaceClass = None
# Instantiate the network object so that the controllers can connect to it.
network = NetworkClass(ruby_system = ruby, topology = options.topology,
routers = [], ext_links = [], int_links = [], netifs = [])
ruby.network = network
protocol = buildEnv['PROTOCOL']
exec "import %s" % protocol
try:
(cpu_sequencers, dir_cntrls, topology) = \
eval("%s.create_system(options, full_system, system, dma_ports,\
ruby)"
% protocol)
except:
print "Error: could not create sytem for ruby protocol %s" % protocol
raise
# Create a port proxy for connecting the system port. This is
# independent of the protocol and kept in the protocol-agnostic
# part (i.e. here).
sys_port_proxy = RubyPortProxy(ruby_system = ruby)
# Give the system port proxy a SimObject parent without creating a
# full-fledged controller
system.sys_port_proxy = sys_port_proxy
# Connect the system port for loading of binaries etc
system.system_port = system.sys_port_proxy.slave
# Create the network topology
topology.makeTopology(options, network, IntLinkClass, ExtLinkClass,
RouterClass)
if options.garnet_network is None:
assert(NetworkClass == SimpleNetwork)
assert(RouterClass == Switch)
network.setup_buffers()
if InterfaceClass != None:
netifs = [InterfaceClass(id=i) for (i,n) in enumerate(network.ext_links)]
network.netifs = netifs
if options.network_fault_model:
assert(options.garnet_network == "fixed")
network.enable_fault_model = True
network.fault_model = FaultModel()
setup_memory_controllers(system, ruby, dir_cntrls, options)
# Connect the cpu sequencers and the piobus
if piobus != None:
for cpu_seq in cpu_sequencers:
cpu_seq.pio_master_port = piobus.slave
cpu_seq.mem_master_port = piobus.slave
if buildEnv['TARGET_ISA'] == "x86":
cpu_seq.pio_slave_port = piobus.master
ruby._cpu_ports = cpu_sequencers
ruby.num_of_sequencers = len(cpu_sequencers)
# Create a backing copy of physical memory in case required
if options.access_backing_store:
ruby.access_backing_store = True
ruby.phys_mem = SimpleMemory(range=system.mem_ranges[0],
in_addr_map=False)
def send_evicts(options):
# currently, 2 scenarios warrant forwarding evictions to the CPU:
# 1. The O3 model must keep the LSQ coherent with the caches
# 2. The x86 mwait instruction is built on top of coherence invalidations
if options.cpu_type == "detailed" or buildEnv['TARGET_ISA'] == 'x86':
return True
return False