gem5/dev/ide_disk.cc
Ali Saidi 8f8d09538f Mostly done with all device models for new memory system. Still need to get timing packets working and get sinic working
after merge from head. Checkpointing may need some work now. Endian-happiness still not complete.

SConscript:
    add all devices back into make file
base/inet.hh:
dev/etherbus.cc:
dev/etherbus.hh:
dev/etherdump.cc:
dev/etherdump.hh:
dev/etherint.hh:
dev/etherlink.cc:
dev/etherlink.hh:
dev/etherpkt.cc:
dev/etherpkt.hh:
dev/ethertap.cc:
dev/ethertap.hh:
dev/pktfifo.cc:
dev/pktfifo.hh:
    rename PacketPtr EthPacketPtr so it doesn't conflict with the PacketPtr type in the memory system
configs/test/fs.py:
    add nics to fs.py
cpu/cpu_exec_context.cc:
    remove this check, as it's not valid. We may want to add something else back in to make sure that no one can delete the
    static virtual ports in the exec context
cpu/simple/cpu.cc:
cpu/simple/cpu.hh:
dev/alpha_console.cc:
dev/ide_ctrl.cc:
    use new methods for accessing packet data
dev/ide_disk.cc:
    add some more dprintfs
dev/io_device.cc:
    delete packets when we are done with them. Update for new packet methods to access data
dev/isa_fake.cc:
dev/pciconfigall.cc:
dev/tsunami_cchip.cc:
dev/tsunami_io.cc:
dev/tsunami_pchip.cc:
dev/uart8250.cc:
dev/uart8250.hh:
mem/physical.cc:
mem/port.cc:
    dUpdate for new packet methods to access data
dev/ns_gige.cc:
    Update for new memory system
dev/ns_gige.hh:
python/m5/objects/Ethernet.py:
    update for new memory system
dev/sinic.cc:
dev/sinic.hh:
    Update for new memory system. Untested as need to merge in head because of kernel driver differences between versions
mem/packet.hh:
    Add methods to access data instead of accessing it directly.

--HG--
extra : convert_revision : 223f43876afd404e68337270cd9a5e44d0bf553e
2006-04-24 19:31:50 -04:00

1108 lines
31 KiB
C++

/*
* Copyright (c) 2004-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/** @file
* Device model implementation for an IDE disk
*/
#include <cerrno>
#include <cstring>
#include <deque>
#include <string>
#include "base/chunk_generator.hh"
#include "base/cprintf.hh" // csprintf
#include "base/trace.hh"
#include "dev/disk_image.hh"
#include "dev/ide_disk.hh"
#include "dev/ide_ctrl.hh"
#include "dev/tsunami.hh"
#include "dev/tsunami_pchip.hh"
#include "sim/builder.hh"
#include "sim/sim_object.hh"
#include "sim/root.hh"
#include "arch/isa_traits.hh"
using namespace std;
using namespace TheISA;
IdeDisk::IdeDisk(const string &name, DiskImage *img,
int id, Tick delay)
: SimObject(name), ctrl(NULL), image(img), diskDelay(delay),
dmaTransferEvent(this), dmaReadCG(NULL), dmaReadWaitEvent(this),
dmaWriteCG(NULL), dmaWriteWaitEvent(this), dmaPrdReadEvent(this),
dmaReadEvent(this), dmaWriteEvent(this)
{
// Reset the device state
reset(id);
// fill out the drive ID structure
memset(&driveID, 0, sizeof(struct ataparams));
// Calculate LBA and C/H/S values
uint16_t cylinders;
uint8_t heads;
uint8_t sectors;
uint32_t lba_size = image->size();
if (lba_size >= 16383*16*63) {
cylinders = 16383;
heads = 16;
sectors = 63;
} else {
if (lba_size >= 63)
sectors = 63;
else
sectors = lba_size;
if ((lba_size / sectors) >= 16)
heads = 16;
else
heads = (lba_size / sectors);
cylinders = lba_size / (heads * sectors);
}
// Setup the model name
strncpy((char *)driveID.atap_model, "5MI EDD si k",
sizeof(driveID.atap_model));
// Set the maximum multisector transfer size
driveID.atap_multi = MAX_MULTSECT;
// IORDY supported, IORDY disabled, LBA enabled, DMA enabled
driveID.atap_capabilities1 = 0x7;
// UDMA support, EIDE support
driveID.atap_extensions = 0x6;
// Setup default C/H/S settings
driveID.atap_cylinders = cylinders;
driveID.atap_sectors = sectors;
driveID.atap_heads = heads;
// Setup the current multisector transfer size
driveID.atap_curmulti = MAX_MULTSECT;
driveID.atap_curmulti_valid = 0x1;
// Number of sectors on disk
driveID.atap_capacity = lba_size;
// Multiword DMA mode 2 and below supported
driveID.atap_dmamode_supp = 0x400;
// Set PIO mode 4 and 3 supported
driveID.atap_piomode_supp = 0x3;
// Set DMA mode 4 and below supported
driveID.atap_udmamode_supp = 0x1f;
// Statically set hardware config word
driveID.atap_hwreset_res = 0x4001;
//arbitrary for now...
driveID.atap_ata_major = WDC_VER_ATA7;
}
IdeDisk::~IdeDisk()
{
// destroy the data buffer
delete [] dataBuffer;
}
void
IdeDisk::reset(int id)
{
// initialize the data buffer and shadow registers
dataBuffer = new uint8_t[MAX_DMA_SIZE];
memset(dataBuffer, 0, MAX_DMA_SIZE);
memset(&cmdReg, 0, sizeof(CommandReg_t));
memset(&curPrd.entry, 0, sizeof(PrdEntry_t));
curPrdAddr = 0;
curSector = 0;
cmdBytes = 0;
cmdBytesLeft = 0;
drqBytesLeft = 0;
dmaRead = false;
intrPending = false;
// set the device state to idle
dmaState = Dma_Idle;
if (id == DEV0) {
devState = Device_Idle_S;
devID = DEV0;
} else if (id == DEV1) {
devState = Device_Idle_NS;
devID = DEV1;
} else {
panic("Invalid device ID: %#x\n", id);
}
// set the device ready bit
status = STATUS_DRDY_BIT;
/* The error register must be set to 0x1 on start-up to
indicate that no diagnostic error was detected */
cmdReg.error = 0x1;
}
////
// Utility functions
////
bool
IdeDisk::isDEVSelect()
{
return ctrl->isDiskSelected(this);
}
Addr
IdeDisk::pciToDma(Addr pciAddr)
{
if (ctrl)
return ctrl->plat->pciToDma(pciAddr);
else
panic("Access to unset controller!\n");
}
////
// Device registers read/write
////
void
IdeDisk::read(const Addr &offset, IdeRegType reg_type, uint8_t *data)
{
DevAction_t action = ACT_NONE;
switch (reg_type) {
case COMMAND_BLOCK:
switch (offset) {
// Data transfers occur two bytes at a time
case DATA_OFFSET:
*(uint16_t*)data = cmdReg.data;
action = ACT_DATA_READ_SHORT;
break;
case ERROR_OFFSET:
*data = cmdReg.error;
break;
case NSECTOR_OFFSET:
*data = cmdReg.sec_count;
break;
case SECTOR_OFFSET:
*data = cmdReg.sec_num;
break;
case LCYL_OFFSET:
*data = cmdReg.cyl_low;
break;
case HCYL_OFFSET:
*data = cmdReg.cyl_high;
break;
case DRIVE_OFFSET:
*data = cmdReg.drive;
break;
case STATUS_OFFSET:
*data = status;
action = ACT_STAT_READ;
break;
default:
panic("Invalid IDE command register offset: %#x\n", offset);
}
break;
case CONTROL_BLOCK:
if (offset == ALTSTAT_OFFSET)
*data = status;
else
panic("Invalid IDE control register offset: %#x\n", offset);
break;
default:
panic("Unknown register block!\n");
}
DPRINTF(IdeDisk, "Read to disk at offset: %#x data %#x\n", offset,
(uint32_t)*data);
if (action != ACT_NONE)
updateState(action);
}
void
IdeDisk::write(const Addr &offset, IdeRegType reg_type, const uint8_t *data)
{
DevAction_t action = ACT_NONE;
switch (reg_type) {
case COMMAND_BLOCK:
switch (offset) {
case DATA_OFFSET:
cmdReg.data = *(uint16_t*)data;
action = ACT_DATA_WRITE_SHORT;
break;
case FEATURES_OFFSET:
break;
case NSECTOR_OFFSET:
cmdReg.sec_count = *data;
break;
case SECTOR_OFFSET:
cmdReg.sec_num = *data;
break;
case LCYL_OFFSET:
cmdReg.cyl_low = *data;
break;
case HCYL_OFFSET:
cmdReg.cyl_high = *data;
break;
case DRIVE_OFFSET:
cmdReg.drive = *data;
action = ACT_SELECT_WRITE;
break;
case COMMAND_OFFSET:
cmdReg.command = *data;
action = ACT_CMD_WRITE;
break;
default:
panic("Invalid IDE command register offset: %#x\n", offset);
}
break;
case CONTROL_BLOCK:
if (offset == CONTROL_OFFSET) {
if (*data & CONTROL_RST_BIT) {
// force the device into the reset state
devState = Device_Srst;
action = ACT_SRST_SET;
} else if (devState == Device_Srst && !(*data & CONTROL_RST_BIT))
action = ACT_SRST_CLEAR;
nIENBit = (*data & CONTROL_IEN_BIT) ? true : false;
}
else
panic("Invalid IDE control register offset: %#x\n", offset);
break;
default:
panic("Unknown register block!\n");
}
DPRINTF(IdeDisk, "Write to disk at offset: %#x data %#x\n", offset,
(uint32_t)*data);
if (action != ACT_NONE)
updateState(action);
}
////
// Perform DMA transactions
////
void
IdeDisk::doDmaTransfer()
{
if (dmaState != Dma_Transfer || devState != Transfer_Data_Dma)
panic("Inconsistent DMA transfer state: dmaState = %d devState = %d\n",
dmaState, devState);
if (ctrl->dmaPending()) {
dmaTransferEvent.schedule(curTick + DMA_BACKOFF_PERIOD);
return;
} else
ctrl->dmaRead(curPrdAddr, sizeof(PrdEntry_t), &dmaPrdReadEvent,
(uint8_t*)&curPrd.entry);
}
void
IdeDisk::dmaPrdReadDone()
{
DPRINTF(IdeDisk,
"PRD: baseAddr:%#x (%#x) byteCount:%d (%d) eot:%#x sector:%d\n",
curPrd.getBaseAddr(), pciToDma(curPrd.getBaseAddr()),
curPrd.getByteCount(), (cmdBytesLeft/SectorSize),
curPrd.getEOT(), curSector);
// the prd pointer has already been translated, so just do an increment
curPrdAddr = curPrdAddr + sizeof(PrdEntry_t);
if (dmaRead)
doDmaDataRead();
else
doDmaDataWrite();
}
void
IdeDisk::doDmaDataRead()
{
/** @todo we need to figure out what the delay actually will be */
Tick totalDiskDelay = diskDelay + (curPrd.getByteCount() / SectorSize);
DPRINTF(IdeDisk, "doDmaRead, diskDelay: %d totalDiskDelay: %d\n",
diskDelay, totalDiskDelay);
dmaReadWaitEvent.schedule(curTick + totalDiskDelay);
}
void
IdeDisk::doDmaRead()
{
if (!dmaReadCG) {
// clear out the data buffer
memset(dataBuffer, 0, MAX_DMA_SIZE);
dmaReadCG = new ChunkGenerator(curPrd.getBaseAddr(),
curPrd.getByteCount(), TheISA::PageBytes);
}
if (ctrl->dmaPending()) {
panic("shouldn't be reentant??");
dmaReadWaitEvent.schedule(curTick + DMA_BACKOFF_PERIOD);
return;
} else if (!dmaReadCG->done()) {
assert(dmaReadCG->complete() < MAX_DMA_SIZE);
ctrl->dmaRead(pciToDma(dmaReadCG->addr()), dmaReadCG->size(),
&dmaReadWaitEvent, dataBuffer + dmaReadCG->complete());
dmaReadCG->next();
} else {
assert(dmaReadCG->done());
delete dmaReadCG;
dmaReadCG = NULL;
dmaReadDone();
}
}
void
IdeDisk::dmaReadDone()
{
uint32_t bytesWritten = 0;
// write the data to the disk image
for (bytesWritten = 0; bytesWritten < curPrd.getByteCount();
bytesWritten += SectorSize) {
cmdBytesLeft -= SectorSize;
writeDisk(curSector++, (uint8_t *)(dataBuffer + bytesWritten));
}
// check for the EOT
if (curPrd.getEOT()) {
assert(cmdBytesLeft == 0);
dmaState = Dma_Idle;
updateState(ACT_DMA_DONE);
} else {
doDmaTransfer();
}
}
void
IdeDisk::doDmaDataWrite()
{
/** @todo we need to figure out what the delay actually will be */
Tick totalDiskDelay = diskDelay + (curPrd.getByteCount() / SectorSize);
uint32_t bytesRead = 0;
DPRINTF(IdeDisk, "doDmaWrite, diskDelay: %d totalDiskDelay: %d\n",
diskDelay, totalDiskDelay);
memset(dataBuffer, 0, MAX_DMA_SIZE);
assert(cmdBytesLeft <= MAX_DMA_SIZE);
while (bytesRead < curPrd.getByteCount()) {
readDisk(curSector++, (uint8_t *)(dataBuffer + bytesRead));
bytesRead += SectorSize;
cmdBytesLeft -= SectorSize;
}
dmaWriteWaitEvent.schedule(curTick + totalDiskDelay);
}
void
IdeDisk::doDmaWrite()
{
if (!dmaWriteCG) {
// clear out the data buffer
dmaWriteCG = new ChunkGenerator(curPrd.getBaseAddr(),
curPrd.getByteCount(), TheISA::PageBytes);
}
if (ctrl->dmaPending()) {
panic("shouldn't be reentant??");
dmaWriteWaitEvent.schedule(curTick + DMA_BACKOFF_PERIOD);
return;
} else if (!dmaWriteCG->done()) {
assert(dmaWriteCG->complete() < MAX_DMA_SIZE);
ctrl->dmaWrite(pciToDma(dmaWriteCG->addr()), dmaWriteCG->size(),
&dmaWriteWaitEvent, dataBuffer + dmaWriteCG->complete());
dmaWriteCG->next();
} else {
assert(dmaWriteCG->done());
delete dmaWriteCG;
dmaWriteCG = NULL;
dmaWriteDone();
}
}
void
IdeDisk::dmaWriteDone()
{
// check for the EOT
if (curPrd.getEOT()) {
assert(cmdBytesLeft == 0);
dmaState = Dma_Idle;
updateState(ACT_DMA_DONE);
} else {
doDmaTransfer();
}
}
////
// Disk utility routines
///
void
IdeDisk::readDisk(uint32_t sector, uint8_t *data)
{
uint32_t bytesRead = image->read(data, sector);
if (bytesRead != SectorSize)
panic("Can't read from %s. Only %d of %d read. errno=%d\n",
name(), bytesRead, SectorSize, errno);
}
void
IdeDisk::writeDisk(uint32_t sector, uint8_t *data)
{
uint32_t bytesWritten = image->write(data, sector);
if (bytesWritten != SectorSize)
panic("Can't write to %s. Only %d of %d written. errno=%d\n",
name(), bytesWritten, SectorSize, errno);
}
////
// Setup and handle commands
////
void
IdeDisk::startDma(const uint32_t &prdTableBase)
{
if (dmaState != Dma_Start)
panic("Inconsistent DMA state, should be in Dma_Start!\n");
if (devState != Transfer_Data_Dma)
panic("Inconsistent device state for DMA start!\n");
// PRD base address is given by bits 31:2
curPrdAddr = pciToDma((Addr)(prdTableBase & ~ULL(0x3)));
dmaState = Dma_Transfer;
// schedule dma transfer (doDmaTransfer)
dmaTransferEvent.schedule(curTick + 1);
}
void
IdeDisk::abortDma()
{
if (dmaState == Dma_Idle)
panic("Inconsistent DMA state, should be Start or Transfer!");
if (devState != Transfer_Data_Dma && devState != Prepare_Data_Dma)
panic("Inconsistent device state, should be Transfer or Prepare!\n");
updateState(ACT_CMD_ERROR);
}
void
IdeDisk::startCommand()
{
DevAction_t action = ACT_NONE;
uint32_t size = 0;
dmaRead = false;
// Decode commands
switch (cmdReg.command) {
// Supported non-data commands
case WDSF_READ_NATIVE_MAX:
size = image->size() - 1;
cmdReg.sec_num = (size & 0xff);
cmdReg.cyl_low = ((size & 0xff00) >> 8);
cmdReg.cyl_high = ((size & 0xff0000) >> 16);
cmdReg.head = ((size & 0xf000000) >> 24);
devState = Command_Execution;
action = ACT_CMD_COMPLETE;
break;
case WDCC_RECAL:
case WDCC_IDP:
case WDCC_STANDBY_IMMED:
case WDCC_FLUSHCACHE:
case WDSF_VERIFY:
case WDSF_SEEK:
case SET_FEATURES:
case WDCC_SETMULTI:
devState = Command_Execution;
action = ACT_CMD_COMPLETE;
break;
// Supported PIO data-in commands
case WDCC_IDENTIFY:
cmdBytes = cmdBytesLeft = sizeof(struct ataparams);
devState = Prepare_Data_In;
action = ACT_DATA_READY;
break;
case WDCC_READMULTI:
case WDCC_READ:
if (!(cmdReg.drive & DRIVE_LBA_BIT))
panic("Attempt to perform CHS access, only supports LBA\n");
if (cmdReg.sec_count == 0)
cmdBytes = cmdBytesLeft = (256 * SectorSize);
else
cmdBytes = cmdBytesLeft = (cmdReg.sec_count * SectorSize);
curSector = getLBABase();
/** @todo make this a scheduled event to simulate disk delay */
devState = Prepare_Data_In;
action = ACT_DATA_READY;
break;
// Supported PIO data-out commands
case WDCC_WRITEMULTI:
case WDCC_WRITE:
if (!(cmdReg.drive & DRIVE_LBA_BIT))
panic("Attempt to perform CHS access, only supports LBA\n");
if (cmdReg.sec_count == 0)
cmdBytes = cmdBytesLeft = (256 * SectorSize);
else
cmdBytes = cmdBytesLeft = (cmdReg.sec_count * SectorSize);
curSector = getLBABase();
devState = Prepare_Data_Out;
action = ACT_DATA_READY;
break;
// Supported DMA commands
case WDCC_WRITEDMA:
dmaRead = true; // a write to the disk is a DMA read from memory
case WDCC_READDMA:
if (!(cmdReg.drive & DRIVE_LBA_BIT))
panic("Attempt to perform CHS access, only supports LBA\n");
if (cmdReg.sec_count == 0)
cmdBytes = cmdBytesLeft = (256 * SectorSize);
else
cmdBytes = cmdBytesLeft = (cmdReg.sec_count * SectorSize);
curSector = getLBABase();
devState = Prepare_Data_Dma;
action = ACT_DMA_READY;
break;
default:
panic("Unsupported ATA command: %#x\n", cmdReg.command);
}
if (action != ACT_NONE) {
// set the BSY bit
status |= STATUS_BSY_BIT;
// clear the DRQ bit
status &= ~STATUS_DRQ_BIT;
// clear the DF bit
status &= ~STATUS_DF_BIT;
updateState(action);
}
}
////
// Handle setting and clearing interrupts
////
void
IdeDisk::intrPost()
{
DPRINTF(IdeDisk, "Posting Interrupt\n");
if (intrPending)
panic("Attempt to post an interrupt with one pending\n");
intrPending = true;
// talk to controller to set interrupt
if (ctrl) {
ctrl->bmi_regs.bmis0 |= IDEINTS;
ctrl->intrPost();
}
}
void
IdeDisk::intrClear()
{
DPRINTF(IdeDisk, "Clearing Interrupt\n");
if (!intrPending)
panic("Attempt to clear a non-pending interrupt\n");
intrPending = false;
// talk to controller to clear interrupt
if (ctrl)
ctrl->intrClear();
}
////
// Manage the device internal state machine
////
void
IdeDisk::updateState(DevAction_t action)
{
switch (devState) {
case Device_Srst:
if (action == ACT_SRST_SET) {
// set the BSY bit
status |= STATUS_BSY_BIT;
} else if (action == ACT_SRST_CLEAR) {
// clear the BSY bit
status &= ~STATUS_BSY_BIT;
// reset the device state
reset(devID);
}
break;
case Device_Idle_S:
if (action == ACT_SELECT_WRITE && !isDEVSelect()) {
devState = Device_Idle_NS;
} else if (action == ACT_CMD_WRITE) {
startCommand();
}
break;
case Device_Idle_SI:
if (action == ACT_SELECT_WRITE && !isDEVSelect()) {
devState = Device_Idle_NS;
intrClear();
} else if (action == ACT_STAT_READ || isIENSet()) {
devState = Device_Idle_S;
intrClear();
} else if (action == ACT_CMD_WRITE) {
intrClear();
startCommand();
}
break;
case Device_Idle_NS:
if (action == ACT_SELECT_WRITE && isDEVSelect()) {
if (!isIENSet() && intrPending) {
devState = Device_Idle_SI;
intrPost();
}
if (isIENSet() || !intrPending) {
devState = Device_Idle_S;
}
}
break;
case Command_Execution:
if (action == ACT_CMD_COMPLETE) {
// clear the BSY bit
setComplete();
if (!isIENSet()) {
devState = Device_Idle_SI;
intrPost();
} else {
devState = Device_Idle_S;
}
}
break;
case Prepare_Data_In:
if (action == ACT_CMD_ERROR) {
// clear the BSY bit
setComplete();
if (!isIENSet()) {
devState = Device_Idle_SI;
intrPost();
} else {
devState = Device_Idle_S;
}
} else if (action == ACT_DATA_READY) {
// clear the BSY bit
status &= ~STATUS_BSY_BIT;
// set the DRQ bit
status |= STATUS_DRQ_BIT;
// copy the data into the data buffer
if (cmdReg.command == WDCC_IDENTIFY) {
// Reset the drqBytes for this block
drqBytesLeft = sizeof(struct ataparams);
memcpy((void *)dataBuffer, (void *)&driveID,
sizeof(struct ataparams));
} else {
// Reset the drqBytes for this block
drqBytesLeft = SectorSize;
readDisk(curSector++, dataBuffer);
}
// put the first two bytes into the data register
memcpy((void *)&cmdReg.data, (void *)dataBuffer,
sizeof(uint16_t));
if (!isIENSet()) {
devState = Data_Ready_INTRQ_In;
intrPost();
} else {
devState = Transfer_Data_In;
}
}
break;
case Data_Ready_INTRQ_In:
if (action == ACT_STAT_READ) {
devState = Transfer_Data_In;
intrClear();
}
break;
case Transfer_Data_In:
if (action == ACT_DATA_READ_BYTE || action == ACT_DATA_READ_SHORT) {
if (action == ACT_DATA_READ_BYTE) {
panic("DEBUG: READING DATA ONE BYTE AT A TIME!\n");
} else {
drqBytesLeft -= 2;
cmdBytesLeft -= 2;
// copy next short into data registers
if (drqBytesLeft)
memcpy((void *)&cmdReg.data,
(void *)&dataBuffer[SectorSize - drqBytesLeft],
sizeof(uint16_t));
}
if (drqBytesLeft == 0) {
if (cmdBytesLeft == 0) {
// Clear the BSY bit
setComplete();
devState = Device_Idle_S;
} else {
devState = Prepare_Data_In;
// set the BSY_BIT
status |= STATUS_BSY_BIT;
// clear the DRQ_BIT
status &= ~STATUS_DRQ_BIT;
/** @todo change this to a scheduled event to simulate
disk delay */
updateState(ACT_DATA_READY);
}
}
}
break;
case Prepare_Data_Out:
if (action == ACT_CMD_ERROR || cmdBytesLeft == 0) {
// clear the BSY bit
setComplete();
if (!isIENSet()) {
devState = Device_Idle_SI;
intrPost();
} else {
devState = Device_Idle_S;
}
} else if (action == ACT_DATA_READY && cmdBytesLeft != 0) {
// clear the BSY bit
status &= ~STATUS_BSY_BIT;
// set the DRQ bit
status |= STATUS_DRQ_BIT;
// clear the data buffer to get it ready for writes
memset(dataBuffer, 0, MAX_DMA_SIZE);
// reset the drqBytes for this block
drqBytesLeft = SectorSize;
if (cmdBytesLeft == cmdBytes || isIENSet()) {
devState = Transfer_Data_Out;
} else {
devState = Data_Ready_INTRQ_Out;
intrPost();
}
}
break;
case Data_Ready_INTRQ_Out:
if (action == ACT_STAT_READ) {
devState = Transfer_Data_Out;
intrClear();
}
break;
case Transfer_Data_Out:
if (action == ACT_DATA_WRITE_BYTE ||
action == ACT_DATA_WRITE_SHORT) {
if (action == ACT_DATA_READ_BYTE) {
panic("DEBUG: WRITING DATA ONE BYTE AT A TIME!\n");
} else {
// copy the latest short into the data buffer
memcpy((void *)&dataBuffer[SectorSize - drqBytesLeft],
(void *)&cmdReg.data,
sizeof(uint16_t));
drqBytesLeft -= 2;
cmdBytesLeft -= 2;
}
if (drqBytesLeft == 0) {
// copy the block to the disk
writeDisk(curSector++, dataBuffer);
// set the BSY bit
status |= STATUS_BSY_BIT;
// set the seek bit
status |= STATUS_SEEK_BIT;
// clear the DRQ bit
status &= ~STATUS_DRQ_BIT;
devState = Prepare_Data_Out;
/** @todo change this to a scheduled event to simulate
disk delay */
updateState(ACT_DATA_READY);
}
}
break;
case Prepare_Data_Dma:
if (action == ACT_CMD_ERROR) {
// clear the BSY bit
setComplete();
if (!isIENSet()) {
devState = Device_Idle_SI;
intrPost();
} else {
devState = Device_Idle_S;
}
} else if (action == ACT_DMA_READY) {
// clear the BSY bit
status &= ~STATUS_BSY_BIT;
// set the DRQ bit
status |= STATUS_DRQ_BIT;
devState = Transfer_Data_Dma;
if (dmaState != Dma_Idle)
panic("Inconsistent DMA state, should be Dma_Idle\n");
dmaState = Dma_Start;
// wait for the write to the DMA start bit
}
break;
case Transfer_Data_Dma:
if (action == ACT_CMD_ERROR || action == ACT_DMA_DONE) {
// clear the BSY bit
setComplete();
// set the seek bit
status |= STATUS_SEEK_BIT;
// clear the controller state for DMA transfer
ctrl->setDmaComplete(this);
if (!isIENSet()) {
devState = Device_Idle_SI;
intrPost();
} else {
devState = Device_Idle_S;
}
}
break;
default:
panic("Unknown IDE device state: %#x\n", devState);
}
}
void
IdeDisk::serialize(ostream &os)
{
// Check all outstanding events to see if they are scheduled
// these are all mutually exclusive
Tick reschedule = 0;
Events_t event = None;
int eventCount = 0;
if (dmaTransferEvent.scheduled()) {
reschedule = dmaTransferEvent.when();
event = Transfer;
eventCount++;
}
if (dmaReadWaitEvent.scheduled()) {
reschedule = dmaReadWaitEvent.when();
event = ReadWait;
eventCount++;
}
if (dmaWriteWaitEvent.scheduled()) {
reschedule = dmaWriteWaitEvent.when();
event = WriteWait;
eventCount++;
}
if (dmaPrdReadEvent.scheduled()) {
reschedule = dmaPrdReadEvent.when();
event = PrdRead;
eventCount++;
}
if (dmaReadEvent.scheduled()) {
reschedule = dmaReadEvent.when();
event = DmaRead;
eventCount++;
}
if (dmaWriteEvent.scheduled()) {
reschedule = dmaWriteEvent.when();
event = DmaWrite;
eventCount++;
}
assert(eventCount <= 1);
SERIALIZE_SCALAR(reschedule);
SERIALIZE_ENUM(event);
// Serialize device registers
SERIALIZE_SCALAR(cmdReg.data);
SERIALIZE_SCALAR(cmdReg.sec_count);
SERIALIZE_SCALAR(cmdReg.sec_num);
SERIALIZE_SCALAR(cmdReg.cyl_low);
SERIALIZE_SCALAR(cmdReg.cyl_high);
SERIALIZE_SCALAR(cmdReg.drive);
SERIALIZE_SCALAR(cmdReg.command);
SERIALIZE_SCALAR(status);
SERIALIZE_SCALAR(nIENBit);
SERIALIZE_SCALAR(devID);
// Serialize the PRD related information
SERIALIZE_SCALAR(curPrd.entry.baseAddr);
SERIALIZE_SCALAR(curPrd.entry.byteCount);
SERIALIZE_SCALAR(curPrd.entry.endOfTable);
SERIALIZE_SCALAR(curPrdAddr);
/** @todo need to serialized chunk generator stuff!! */
// Serialize current transfer related information
SERIALIZE_SCALAR(cmdBytesLeft);
SERIALIZE_SCALAR(cmdBytes);
SERIALIZE_SCALAR(drqBytesLeft);
SERIALIZE_SCALAR(curSector);
SERIALIZE_SCALAR(dmaRead);
SERIALIZE_SCALAR(intrPending);
SERIALIZE_ENUM(devState);
SERIALIZE_ENUM(dmaState);
SERIALIZE_ARRAY(dataBuffer, MAX_DMA_SIZE);
}
void
IdeDisk::unserialize(Checkpoint *cp, const string &section)
{
// Reschedule events that were outstanding
// these are all mutually exclusive
Tick reschedule = 0;
Events_t event = None;
UNSERIALIZE_SCALAR(reschedule);
UNSERIALIZE_ENUM(event);
switch (event) {
case None : break;
case Transfer : dmaTransferEvent.schedule(reschedule); break;
case ReadWait : dmaReadWaitEvent.schedule(reschedule); break;
case WriteWait : dmaWriteWaitEvent.schedule(reschedule); break;
case PrdRead : dmaPrdReadEvent.schedule(reschedule); break;
case DmaRead : dmaReadEvent.schedule(reschedule); break;
case DmaWrite : dmaWriteEvent.schedule(reschedule); break;
}
// Unserialize device registers
UNSERIALIZE_SCALAR(cmdReg.data);
UNSERIALIZE_SCALAR(cmdReg.sec_count);
UNSERIALIZE_SCALAR(cmdReg.sec_num);
UNSERIALIZE_SCALAR(cmdReg.cyl_low);
UNSERIALIZE_SCALAR(cmdReg.cyl_high);
UNSERIALIZE_SCALAR(cmdReg.drive);
UNSERIALIZE_SCALAR(cmdReg.command);
UNSERIALIZE_SCALAR(status);
UNSERIALIZE_SCALAR(nIENBit);
UNSERIALIZE_SCALAR(devID);
// Unserialize the PRD related information
UNSERIALIZE_SCALAR(curPrd.entry.baseAddr);
UNSERIALIZE_SCALAR(curPrd.entry.byteCount);
UNSERIALIZE_SCALAR(curPrd.entry.endOfTable);
UNSERIALIZE_SCALAR(curPrdAddr);
/** @todo need to serialized chunk generator stuff!! */
// Unserialize current transfer related information
UNSERIALIZE_SCALAR(cmdBytes);
UNSERIALIZE_SCALAR(cmdBytesLeft);
UNSERIALIZE_SCALAR(drqBytesLeft);
UNSERIALIZE_SCALAR(curSector);
UNSERIALIZE_SCALAR(dmaRead);
UNSERIALIZE_SCALAR(intrPending);
UNSERIALIZE_ENUM(devState);
UNSERIALIZE_ENUM(dmaState);
UNSERIALIZE_ARRAY(dataBuffer, MAX_DMA_SIZE);
}
#ifndef DOXYGEN_SHOULD_SKIP_THIS
enum DriveID { master, slave };
static const char *DriveID_strings[] = { "master", "slave" };
BEGIN_DECLARE_SIM_OBJECT_PARAMS(IdeDisk)
SimObjectParam<DiskImage *> image;
SimpleEnumParam<DriveID> driveID;
Param<int> delay;
END_DECLARE_SIM_OBJECT_PARAMS(IdeDisk)
BEGIN_INIT_SIM_OBJECT_PARAMS(IdeDisk)
INIT_PARAM(image, "Disk image"),
INIT_ENUM_PARAM(driveID, "Drive ID (0=master 1=slave)", DriveID_strings),
INIT_PARAM_DFLT(delay, "Fixed disk delay in microseconds", 1)
END_INIT_SIM_OBJECT_PARAMS(IdeDisk)
CREATE_SIM_OBJECT(IdeDisk)
{
return new IdeDisk(getInstanceName(), image, driveID, delay);
}
REGISTER_SIM_OBJECT("IdeDisk", IdeDisk)
#endif //DOXYGEN_SHOULD_SKIP_THIS