gem5/src/base/remote_gdb.hh
Boris Shingarov d765dbf22c arm: remote GDB: rationalize structure of register offsets
Currently, the wire format of register values in g- and G-packets is
modelled using a union of uint8/16/32/64 arrays.  The offset positions
of each register are expressed as a "register count" scaled according
to the width of the register in question.  This results in counter-
intuitive and error-prone "register count arithmetic", and some
formats would even be altogether unrepresentable in such model, e.g.
a 64-bit register following a 32-bit one would have a fractional index
in the regs64 array.
Another difficulty is that the array is allocated before the actual
architecture of the workload is known (and therefore before the correct
size for the array can be calculated).

With this patch I propose a simpler mechanism for expressing the
register set structure.  In the new code, GdbRegCache is an abstract
class; its subclasses contain straightforward structs reflecting the
register representation.  The determination whether to use e.g. the
AArch32 vs. AArch64 register set (or SPARCv8 vs SPARCv9, etc.) is made
by polymorphically dispatching getregs() to the concrete subclass.
The subclass is not instantiated until it is needed for actual
g-/G-packet processing, when the mode is already known.

This patch is not meant to be merged in on its own, because it changes
the contract between src/base/remote_gdb.* and src/arch/*/remote_gdb.*,
so as it stands right now, it would break the other architectures.
In this patch only the base and the ARM code are provided for review;
once we agree on the structure, I will provide src/arch/*/remote_gdb.*
for the other architectures; those patches could then be merged in
together.

Review Request: http://reviews.gem5.org/r/3207/
Pushed by Joel Hestness <jthestness@gmail.com>
2015-12-18 15:12:07 -06:00

345 lines
9.5 KiB
C++

/*
* Copyright 2015 LabWare
* Copyright 2014 Google, Inc.
* Copyright (c) 2002-2005 The Regents of The University of Michigan
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Nathan Binkert
* Boris Shingarov
*/
#ifndef __REMOTE_GDB_HH__
#define __REMOTE_GDB_HH__
#include <sys/signal.h>
#include <map>
#include "arch/types.hh"
#include "base/intmath.hh"
#include "base/pollevent.hh"
#include "base/socket.hh"
#include "cpu/pc_event.hh"
class System;
class ThreadContext;
class GDBListener;
enum GDBCommands
{
GDBSignal = '?', // last signal
GDBSetBaud = 'b', // set baud (depracated)
GDBSetBreak = 'B', // set breakpoint (depracated)
GDBCont = 'c', // resume
GDBAsyncCont = 'C', // continue with signal
GDBDebug = 'd', // toggle debug flags (deprecated)
GDBDetach = 'D', // detach remote gdb
GDBRegR = 'g', // read general registers
GDBRegW = 'G', // write general registers
GDBSetThread = 'H', // set thread
GDBCycleStep = 'i', // step a single cycle
GDBSigCycleStep = 'I', // signal then cycle step
GDBKill = 'k', // kill program
GDBMemR = 'm', // read memory
GDBMemW = 'M', // write memory
GDBReadReg = 'p', // read register
GDBSetReg = 'P', // write register
GDBQueryVar = 'q', // query variable
GDBSetVar = 'Q', // set variable
GDBReset = 'r', // reset system. (Deprecated)
GDBStep = 's', // step
GDBAsyncStep = 'S', // signal and step
GDBThreadAlive = 'T', // find out if the thread is alive
GDBTargetExit = 'W', // target exited
GDBBinaryDload = 'X', // write memory
GDBClrHwBkpt = 'z', // remove breakpoint or watchpoint
GDBSetHwBkpt = 'Z' // insert breakpoint or watchpoint
};
const char GDBStart = '$';
const char GDBEnd = '#';
const char GDBGoodP = '+';
const char GDBBadP = '-';
const int GDBPacketBufLen = 1024;
class BaseRemoteGDB
{
private:
friend void debugger();
friend class GDBListener;
//Helper functions
protected:
int digit2i(char);
char i2digit(int);
Addr hex2i(const char **);
//Address formats, break types, and gdb commands may change
//between architectures, so they're defined as virtual
//functions.
virtual void mem2hex(char *, const char *, int);
virtual const char * hex2mem(char *, const char *, int);
virtual const char * break_type(char c);
virtual const char * gdb_command(char cmd);
protected:
class InputEvent : public PollEvent
{
protected:
BaseRemoteGDB *gdb;
public:
InputEvent(BaseRemoteGDB *g, int fd, int e);
void process(int revent);
};
class TrapEvent : public Event
{
protected:
int _type;
BaseRemoteGDB *gdb;
public:
TrapEvent(BaseRemoteGDB *g) : gdb(g)
{}
void type(int t) { _type = t; }
void process();
};
friend class InputEvent;
InputEvent *inputEvent;
TrapEvent trapEvent;
GDBListener *listener;
int number;
protected:
//The socket commands come in through
int fd;
protected:
#ifdef notyet
label_t recover;
#endif
bool active;
bool attached;
System *system;
ThreadContext *context;
protected:
/**
* Concrete subclasses of this abstract class represent how the
* register values are transmitted on the wire. Usually each
* architecture should define one subclass, but there can be more
* if there is more than one possible wire format. For example,
* ARM defines both AArch32GdbRegCache and AArch64GdbRegCache.
*/
class BaseGdbRegCache
{
public:
/**
* Return the pointer to the raw bytes buffer containing the
* register values. Each byte of this buffer is literally
* encoded as two hex digits in the g or G RSP packet.
*/
virtual char *data() const = 0;
/**
* Return the size of the raw buffer, in bytes
* (i.e., half of the number of digits in the g/G packet).
*/
virtual size_t size() const = 0;
/**
* Fill the raw buffer from the registers in the ThreadContext.
*/
virtual void getRegs(ThreadContext*) = 0;
/**
* Set the ThreadContext's registers from the values
* in the raw buffer.
*/
virtual void setRegs(ThreadContext*) const = 0;
/**
* Return the name to use in places like DPRINTF.
* Having each concrete superclass redefine this member
* is useful in situations where the class of the regCache
* can change on the fly.
*/
virtual const std::string name() const = 0;
BaseGdbRegCache(BaseRemoteGDB *g) : gdb(g)
{}
protected:
BaseRemoteGDB *gdb;
};
protected:
uint8_t getbyte();
void putbyte(uint8_t b);
int recv(char *data, int len);
void send(const char *data);
protected:
// Machine memory
virtual bool read(Addr addr, size_t size, char *data);
virtual bool write(Addr addr, size_t size, const char *data);
template <class T> T read(Addr addr);
template <class T> void write(Addr addr, T data);
public:
BaseRemoteGDB(System *system, ThreadContext *context);
virtual ~BaseRemoteGDB();
virtual BaseGdbRegCache *gdbRegs() = 0;
void replaceThreadContext(ThreadContext *tc) { context = tc; }
void attach(int fd);
void detach();
bool isattached();
virtual bool acc(Addr addr, size_t len) = 0;
bool trap(int type);
virtual bool breakpoint()
{
return trap(SIGTRAP);
}
protected:
class SingleStepEvent : public Event
{
protected:
BaseRemoteGDB *gdb;
public:
SingleStepEvent(BaseRemoteGDB *g) : gdb(g)
{}
void process();
};
SingleStepEvent singleStepEvent;
void clearSingleStep();
void setSingleStep();
PCEventQueue *getPcEventQueue();
EventQueue *getComInstEventQueue();
/// Schedule an event which will be triggered "delta" instructions later.
void scheduleInstCommitEvent(Event *ev, int delta);
/// Deschedule an instruction count based event.
void descheduleInstCommitEvent(Event *ev);
protected:
virtual bool checkBpLen(size_t len);
class HardBreakpoint : public PCEvent
{
private:
BaseRemoteGDB *gdb;
public:
int refcount;
public:
HardBreakpoint(BaseRemoteGDB *_gdb, Addr addr);
const std::string name() const { return gdb->name() + ".hwbkpt"; }
virtual void process(ThreadContext *tc);
};
friend class HardBreakpoint;
typedef std::map<Addr, HardBreakpoint *> break_map_t;
typedef break_map_t::iterator break_iter_t;
break_map_t hardBreakMap;
bool insertSoftBreak(Addr addr, size_t len);
bool removeSoftBreak(Addr addr, size_t len);
virtual bool insertHardBreak(Addr addr, size_t len);
bool removeHardBreak(Addr addr, size_t len);
protected:
void clearTempBreakpoint(Addr &bkpt);
void setTempBreakpoint(Addr bkpt);
public:
std::string name();
};
template <class T>
inline T
BaseRemoteGDB::read(Addr addr)
{
T temp;
read(addr, sizeof(T), (char *)&temp);
return temp;
}
template <class T>
inline void
BaseRemoteGDB::write(Addr addr, T data)
{ write(addr, sizeof(T), (const char *)&data); }
class GDBListener
{
protected:
class InputEvent : public PollEvent
{
protected:
GDBListener *listener;
public:
InputEvent(GDBListener *l, int fd, int e);
void process(int revent);
};
friend class InputEvent;
InputEvent *inputEvent;
protected:
ListenSocket listener;
BaseRemoteGDB *gdb;
int port;
public:
GDBListener(BaseRemoteGDB *g, int p);
~GDBListener();
void accept();
void listen();
std::string name();
};
#endif /* __REMOTE_GDB_H__ */