/***************************************************************************** * McPAT/CACTI * SOFTWARE LICENSE AGREEMENT * Copyright 2012 Hewlett-Packard Development Company, L.P. * Copyright (c) 2010-2013 Advanced Micro Devices, Inc. * All Rights Reserved * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer; * redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution; * neither the name of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ***************************************************************************/ #ifndef __CONST_H__ #define __CONST_H__ #include #include #include #include #include /* The following are things you might want to change * when compiling */ /* * Address bits in a word, and number of output bits from the cache */ /* was: #define ADDRESS_BITS 32 now: I'm using 42 bits as in the Power4, since that's bigger then the 36 bits on the Pentium 4 and 40 bits on the Opteron */ const int ADDRESS_BITS = 42; /*dt: In addition to the tag bits, the tags also include 1 valid bit, 1 dirty bit, 2 bits for a 4-state cache coherency protocoll (MESI), 1 bit for MRU (change this to log(ways) for full LRU). So in total we have 1 + 1 + 2 + 1 = 5 */ const int EXTRA_TAG_BITS = 5; /* limits on the various N parameters */ const unsigned int MAXDATAN = 512; // maximum for Ndwl and Ndbl const unsigned int MAXSUBARRAYS = 1048576; // maximum subarrays for data and tag arrays const unsigned int MAXDATASPD = 256; // maximum for Nspd const unsigned int MAX_COL_MUX = 256; #define ROUTER_TYPES 3 #define WIRE_TYPES 6 const double Cpolywire = 0; /* Threshold voltages (as a proportion of Vdd) If you don't know them, set all values to 0.5 */ #define VTHFA1 0.452 #define VTHFA2 0.304 #define VTHFA3 0.420 #define VTHFA4 0.413 #define VTHFA5 0.405 #define VTHFA6 0.452 #define VSINV 0.452 #define VTHCOMPINV 0.437 #define VTHMUXNAND 0.548 // TODO : this constant must be revisited #define VTHEVALINV 0.452 #define VTHSENSEEXTDRV 0.438 //WmuxdrvNANDn and WmuxdrvNANDp are no longer being used but it's part of the old //delay_comparator function which we are using exactly as it used to be, so just setting these to 0 const double WmuxdrvNANDn = 0; const double WmuxdrvNANDp = 0; /*===================================================================*/ /* * The following are things you probably wouldn't want to change. */ #define BIGNUM 1e30 #define INF 9999999 #define MAX(a,b) (((a)>(b))?(a):(b)) #define MIN(a,b) (((a)<(b))?(a):(b)) /* Used to communicate with the horowitz model */ #define RISE 1 #define FALL 0 #define NCH 1 #define PCH 0 #define EPSILON 0.5 //v4.1: This constant is being used in order to fix floating point -> integer //conversion problems that were occuring within CACTI. Typical problem that was occuring was //that with different compilers a floating point number like 3.0 would get represented as either //2.9999....or 3.00000001 and then the integer part of the floating point number (3.0) would //be computed differently depending on the compiler. What we are doing now is to replace //int (x) with (int) (x+EPSILON) where EPSILON is 0.5. This would fix such problems. Note that //this works only when x is an integer >= 0. /* * Sheng thinks this is more a solution to solve the simple truncate problem * (http://www.cs.tut.fi/~jkorpela/round.html) rather than the problem mentioned above. * Unfortunately, this solution causes nasty bugs (different results when using O0 and O3). * Moreover, round is not correct in CACTI since when an extra fraction of bit/line is needed, * we need to provide a complete bit/line even the fraction is just 0.01. * So, in later version than 6.5 we use (int)ceil() to get double to int conversion. */ #define EPSILON2 0.1 #define EPSILON3 0.6 #define MINSUBARRAYROWS 16 //For simplicity in modeling, for the row decoding structure, we assume //that each row predecode block is composed of at least one 2-4 decoder. When the outputs from the //row predecode blocks are combined this means that there are at least 4*4=16 row decode outputs #define MAXSUBARRAYROWS 262144 //Each row predecode block produces a max of 2^9 outputs. So //the maximum number of row decode outputs will be 2^9*2^9 #define MINSUBARRAYCOLS 2 #define MAXSUBARRAYCOLS 262144 #define INV 0 #define NOR 1 #define NAND 2 #define NUMBER_TECH_FLAVORS 4 #define NUMBER_INTERCONNECT_PROJECTION_TYPES 2 //aggressive and conservative //0 = Aggressive projections, 1 = Conservative projections #define NUMBER_WIRE_TYPES 4 //local, semi-global and global //1 = 'Semi-global' wire type, 2 = 'Global' wire type const int dram_cell_tech_flavor = 3; #define VBITSENSEMIN 0.08 //minimum bitline sense voltage is fixed to be 80 mV. #define fopt 4.0 #define INPUT_WIRE_TO_INPUT_GATE_CAP_RATIO 0 #define BUFFER_SEPARATION_LENGTH_MULTIPLIER 1 #define NUMBER_MATS_PER_REDUNDANT_MAT 8 #define NUMBER_STACKED_DIE_LAYERS 1 // this variable can be set to carry out solution optimization for // a maximum area allocation. #define STACKED_DIE_LAYER_ALLOTED_AREA_mm2 0 //6.24 //6.21//71.5 // this variable can also be employed when solution optimization // with maximum area allocation is carried out. #define MAX_PERCENT_AWAY_FROM_ALLOTED_AREA 50 // this variable can also be employed when solution optimization // with maximum area allocation is carried out. #define MIN_AREA_EFFICIENCY 20 // this variable can be employed when solution with a desired // aspect ratio is required. #define STACKED_DIE_LAYER_ASPECT_RATIO 1 // this variable can be employed when solution with a desired // aspect ratio is required. #define MAX_PERCENT_AWAY_FROM_ASPECT_RATIO 101 // this variable can be employed to carry out solution optimization // for a certain target random cycle time. #define TARGET_CYCLE_TIME_ns 1000000000 #define NUMBER_PIPELINE_STAGES 4 // this can be used to model the length of interconnect // between a bank and a crossbar #define LENGTH_INTERCONNECT_FROM_BANK_TO_CROSSBAR 0 //3791 // 2880//micron #define IS_CROSSBAR 0 #define NUMBER_INPUT_PORTS_CROSSBAR 8 #define NUMBER_OUTPUT_PORTS_CROSSBAR 8 #define NUMBER_SIGNALS_PER_PORT_CROSSBAR 256 #define MAT_LEAKAGE_REDUCTION_DUE_TO_SLEEP_TRANSISTORS_FACTOR 1 #define LEAKAGE_REDUCTION_DUE_TO_LONG_CHANNEL_HP_TRANSISTORS_FACTOR 1 #define PAGE_MODE 0 #define MAIN_MEM_PER_CHIP_STANDBY_CURRENT_mA 60 // We are actually not using this variable in the CACTI code. We just want to acknowledge that // this current should be multiplied by the DDR(n) system VDD value to compute the standby power // consumed during precharge. const double VDD_STORAGE_LOSS_FRACTION_WORST = 0.125; const double CU_RESISTIVITY = 0.022; //ohm-micron const double BULK_CU_RESISTIVITY = 0.018; //ohm-micron const double PERMITTIVITY_FREE_SPACE = 8.854e-18; //F/micron const static uint32_t sram_num_cells_wl_stitching_ = 16; const static uint32_t dram_num_cells_wl_stitching_ = 64; const static uint32_t comm_dram_num_cells_wl_stitching_ = 256; const static double num_bits_per_ecc_b_ = 8.0; const double bit_to_byte = 8.0; #define MAX_NUMBER_GATES_STAGE 20 #define MAX_NUMBER_HTREE_NODES 20 #define NAND2_LEAK_STACK_FACTOR 0.2 #define NAND3_LEAK_STACK_FACTOR 0.2 #define NOR2_LEAK_STACK_FACTOR 0.2 #define INV_LEAK_STACK_FACTOR 0.5 #define MAX_NUMBER_ARRAY_PARTITIONS 1000000 // abbreviations used in this project // ---------------------------------- // // num : number // rw : read/write // rd : read // wr : write // se : single-ended // sz : size // F : feature // w : width // h : height or horizontal // v : vertical or velocity enum ram_cell_tech_type_num { itrs_hp = 0, itrs_lstp = 1, itrs_lop = 2, lp_dram = 3, comm_dram = 4 }; const double pppm[4] = {1, 1, 1, 1}; const double pppm_lkg[4] = {0, 1, 1, 0}; const double pppm_dyn[4] = {1, 0, 0, 0}; const double pppm_Isub[4] = {0, 1, 0, 0}; const double pppm_Ig[4] = {0, 0, 1, 0}; const double pppm_sc[4] = {0, 0, 0, 1}; #endif