configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it
configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/arch/sparc/process.cc:
MachineBytes doesn't exist any more.
src/arch/sparc/regfile.cc:
Add in the miscRegFile for good measure.
src/cpu/o3/isa_specific.hh:
Add in a section for SPARC
src/cpu/o3/sparc/cpu.cc:
src/cpu/o3/sparc/cpu.hh:
src/cpu/o3/sparc/cpu_builder.cc:
src/cpu/o3/sparc/cpu_impl.hh:
src/cpu/o3/sparc/dyn_inst.cc:
src/cpu/o3/sparc/dyn_inst.hh:
src/cpu/o3/sparc/dyn_inst_impl.hh:
src/cpu/o3/sparc/impl.hh:
src/cpu/o3/sparc/params.hh:
src/cpu/o3/sparc/thread_context.cc:
src/cpu/o3/sparc/thread_context.hh:
Sparc version of this file.
--HG--
extra : convert_revision : 34bb5218f802d0a1328132a518cdd769fb59b6a4
src/arch/sparc/SConscript:
Add code to serialize/unserialze tlb entries
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
update asi names for how they're listed in the supplement
add asis
add more asi functions
src/arch/sparc/isa_traits.hh:
move the interrupt stuff and some basic address space stuff into isa traits
src/arch/sparc/miscregfile.cc:
src/arch/sparc/miscregfile.hh:
add mmu registers to tlb
get rid of implicit asi stuff... the tlb will handle it
src/arch/sparc/regfile.hh:
make isnt/dataAsid return ints not asis
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
first cut at sparc tlb
src/arch/sparc/vtophys.hh:
pagatable nedes to be included here
src/mem/request.hh:
add asi and if the request is a memory mapped register to the requset object
src/sim/host.hh:
fix incorrect definition of LL
--HG--
extra : convert_revision : 6c85cd1681c62c8cd8eab04f70b1f15a034b0aa3
src/arch/sparc/isa/base.isa:
Fix a constant.
src/arch/sparc/isa/decoder.isa:
Made carry calculation more consistent.
src/arch/sparc/isa/operands.isa:
Use the right constant.
--HG--
extra : convert_revision : 25b3a09ff20d4b8e1a95ee8a983d14ef3cfe73bb
Fix a small writeback bug when missing in the L2 in atomic mode
src/mem/bus.cc:
Fix a comment to make sense
src/mem/cache/cache_impl.hh:
Do a functional access to levels above on a read as a temporary solution for L2's in FS
Also fix a small writeback miss in L2 issue
src/mem/cache/coherence/simple_coherence.hh:
src/mem/cache/coherence/uni_coherence.cc:
src/mem/cache/coherence/uni_coherence.hh:
Do a functional access to levels above on a read as a temporary solution for L2's in FS
tests/quick/00.hello/ref/alpha/linux/o3-timing/m5stats.txt:
tests/quick/00.hello/ref/alpha/linux/simple-timing/m5stats.txt:
tests/quick/01.hello-2T-smt/ref/alpha/linux/o3-timing/m5stats.txt:
Update ref's for writeback changes
--HG--
extra : convert_revision : 937febd577b16b7fd97a5a68acaf53541828a251
src/cpu/o3/alpha/cpu_impl.hh:
Handle the PhysicalPort and VirtualPort in the ThreadState.
src/cpu/o3/cpu.cc:
Initialize the thread context.
src/cpu/o3/thread_context.hh:
Add new function to initialize thread context.
src/cpu/o3/thread_context_impl.hh:
Use code now put into function.
src/cpu/simple_thread.cc:
Move code to ThreadState and use the new helper function.
src/cpu/simple_thread.hh:
Remove init() in this derived class; use init() from ThreadState base class.
src/cpu/thread_state.cc:
Move setting up of Physical and Virtual ports here. Change getMemFuncPort() to connectToMemFunc(), which connects a port to a functional port of the memory object below the CPU.
src/cpu/thread_state.hh:
Update functions.
--HG--
extra : convert_revision : ff254715ef0b259dc80d08f13543b63e4024ca8d
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
src/cpu/simple/timing.cc:
Various updates for deleting requests more properly.
The major change is moving the deletion of the fetch request/packet to after the instruction has executed and completed. This should fix a few bugs because Ron's memory system didn't expect a call for a functional access while a timing access was being processed.
--HG--
extra : convert_revision : c7cf114bb1ff3cdaa7b0a40ed4c5302dc9d3a522
src/mem/bus.cc:
Make it so that invalidates being sent from the responder up don't call the responder
but they should also not Panic.
src/mem/packet.hh:
If we don't have data in the packet, don't call deleteData:
Example: InvalidateRequests never have data.
--HG--
extra : convert_revision : 18766bc9f3bb4d852ac651d094254d347abd1634
make a likewise updateIntrInfo for Sparc that's blank so it doesn't fart on build
src/arch/sparc/interrupts.hh:
make a likewise updateIntrInfo for Sparc that's blank so it doesn't fart on build
--HG--
extra : convert_revision : 5f469d0cf897479b42703104cd801a8ef923fcae
src/mem/bridge.cc:
Update brdiges, now that snoop addresses are properly forwarded.
Bus bridge should only handle snoops on the second phase (SNOOP_COMMIT)
src/mem/bus.cc:
src/mem/bus.hh:
Make sure if a busBridge has access to both things that snoop and things that respond it only takes the request once
--HG--
extra : convert_revision : 26cc9ee4429be45d4476fa435e0e9a54843c2509
src/mem/cache/base_cache.cc:
Sometimes a functional access comes while waiting on a outstanding packet being sent.
This could be because Timing CPU does some post processing on the recvTiming which send functional access.
Either the CPU should leave the pkt/req around (so They can be referenced in the mem system). Or the mem
system should remove them from outstanding lists and reinsert them if they fail in the sendTiming.
I did the later, eventually we should consider doing the former if that is the correct behavior.
--HG--
extra : convert_revision : be41e0d2632369dca9d7c15e96e5576d7583fe6a
src/mem/bus.cc:
Only call snoop once per port, need to fix it so snoop ranges that overlap aren't added to list
Functional accesses that call snoop and it goes to a higher bus may change the src, reset it after each snoop.
--HG--
extra : convert_revision : 7276059c798a85cb9d138ccc5531298ecd055c13
src/mem/bus.cc:
Actually return the snoop list when asked for it.
Don't get stuck in infinite functional loops
--HG--
extra : convert_revision : 8e6dafbd10b30d48d28b6b5d4b464e8e8f6a3ddc
src/cpu/o3/fetch_impl.hh:
Fetch needs to make sure it isn't waiting on an Icache access.
--HG--
extra : convert_revision : b53eb58b9e5a00bdb394134586d1f84f84d1c6e1
src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.
Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
--HG--
extra : convert_revision : 9bac3f9ffed4948ee788699b2fa8419bc1ca647c
Fixes for Mem Leak associated with Writebacks.
src/mem/cache/miss/mshr_queue.cc:
Fixes for Mem Leak associated with Writebacks. (Double Delete removed)
--HG--
extra : convert_revision : 7a52ddd57da35995896f2c4438a58aa53f762416
src/mem/cache/cache_impl.hh:
When upgrades change to readEx make sure to allocate the block
Fix dprintf
--HG--
extra : convert_revision : 8700a7e47ad042c8708302620b907849c4bfdded
src/mem/cache/base_cache.cc:
On a delayed response, be sure to call the fixPacket wrapper to toggle hasData flag.
src/mem/packet.cc:
src/mem/packet.hh:
Create a wrapper to toggle the hasData flag on delayed responses
--HG--
extra : convert_revision : 1ced8d4e3dc12a059fb7636d59e429cd3dd46901
src/arch/alpha/faults.hh:
Only use pagetable.hh in FS
src/arch/alpha/pagetable.hh:
pagetable.hh should only be included in FS, so protecting it internally should be unnecessary.
src/cpu/exetrace.cc:
Only use tlb.hh in FS
--HG--
extra : convert_revision : 91ea61f2e7970e7146b6d407ee250fcb20cd4d48
Working on that now.
src/mem/cache/base_cache.cc:
Keep a list of the responders so we can search them on functional accesses.
src/mem/cache/base_cache.hh:
Properly put things on a list for responses so we can search the list.
Also, be sure to check the outgoing ports lists on a functional access (factor some common code out there)
src/mem/cache/cache_impl.hh:
Properly return when the first read hit on a functional access.
Make sure to call to check the other ports list of packets before forwarding it out.
--HG--
extra : convert_revision : 1d21cb55ff29c15716617efc48441329707c088a
src/mem/packet.cc:
Make sure to copy the whole data (we were one byte short)
src/mem/tport.cc:
Fix for the proper semantics of fixPacket
--HG--
extra : convert_revision : 215e05db9099d427afd4994f5b29079354c847d8
