mappings (writes still unverified, and read could probably be looked over
a bit more too)
dev/ide_disk.cc:
dev/ide_disk.hh:
Major changes to fix bogus handling of dma transfers. The read seems to
work pretty well, but the write is unverfied until we can get a disk
image that actually tries to write.
dev/tsunami_pchip.cc:
Change mask to properly mask 13 bits not 12
--HG--
extra : convert_revision : 08fe9bc32970e449cd045de479553a96a4e389d6
(Still not perfect though.)
arch/alpha/isa_desc:
Do a better job of factoring out CPU model. (Still not perfect though.)
Pull execute() methods out of class declarations into separate section
of file, allowing (1) easier replication for different CPU models and
(2) a path to putting them all in a separate file. Force all instruction
execution context into a single model-dependent class (SimpleCPU itself
for SimpleCPU, DynInst for FullCPU).
arch/isa_parser.py:
Do a better job of factoring out CPU model. (Still not perfect though.)
Pull execute() methods out of class declarations into separate section
of file, allowing (1) easier replication for different CPU models and
(2) a path to putting them all in a separate file.
Also restructure top level to allow parser to run under interactive
interpreter session for easier debugging.
cpu/exec_context.hh:
Add a few new methods to clean up isa_desc.
cpu/simple_cpu/simple_cpu.cc:
cpu/static_inst.hh:
StaticInst::execute no longer takes a CPU and an ExecContext,
just a unified FooCPUExecContext.
cpu/simple_cpu/simple_cpu.hh:
Add methods to redirect calls to ExecContext so SimpleCPU
can act as sole instruction execution context for itself.
Typedef SimpleCPU to SimpleCPUExecContext.
--HG--
extra : convert_revision : ecc445503bc585585da5663fe61796580e744da6
Added function to skip determine_cpu_caches(). We may have to update this in the
future: see note below.
arch/alpha/alpha_memory.cc:
dev/ide_ctrl.cc:
dev/tsunamireg.h:
Added ULL for 64bit ints
kern/linux/linux_system.cc:
Added a function to skip determine_cpu_caches, right now it is only used for
printing in proc, however in the future we may either want to implement the SC_CTL
IPR register or manually set alpha_l1i_cacheshape, alpha_l1d_cacheshape,
alpha_l2_cacheshape, alpha_l3_cacheshape to ((size << 10) | (linesize>>1)<<4 | way)
kern/linux/linux_system.hh:
added event to skip determine_cpu_caches()
--HG--
extra : convert_revision : 1065f2091bbe6832b730af490f5b4672c2afedce
arch/alpha/vtophys.cc:
Removed buggy code that tries to fix PAL addresses (may cause problems
while trying to debug in PAL code, but that should do this fix outside
of vtophys)
base/loader/symtab.cc:
base/loader/symtab.hh:
cpu/exetrace.cc:
Changed InstExec traces to always print a symbol name
dev/ide_ctrl.cc:
dev/ide_disk.cc:
Tabs
dev/ide_disk.hh:
Change buffer size
dev/tsunami_pchip.cc:
Fix translatePciToDma to support scatter gather mapping
kern/linux/linux_system.cc:
Force simulator to wait until remote debugger attaches (should be removed
or turned on/off with a flag)
--HG--
extra : convert_revision : 1d08aebe3f448c87a963dd613de3e2e0cff0d48d
instead of with the source code. This will hopefully be especially
useful when we're generating dozens of files when we flesh out the
object description stuff.
remove generated files from the source tree. python is required
to build now.
base/trace.hh:
no need for the underscore in the name
base/traceflags.py:
clean up code
--HG--
extra : convert_revision : f68af8c3460eb7e73a1defaea3081a02ad7db33c
Add support for generic visitors for stats and use them
to implement independent output functions.
Support for mysql output and some initial code for hacking
on mysql output with python
arch/alpha/pseudo_inst.cc:
base/hybrid_pred.cc:
base/hybrid_pred.hh:
base/sat_counter.cc:
base/sat_counter.hh:
cpu/simple_cpu/simple_cpu.cc:
kern/tru64/tru64_events.cc:
sim/main.cc:
sim/process.cc:
sim/process.hh:
sim/sim_events.cc:
sim/sim_object.cc:
sim/system.hh:
update for changes in stats package
base/statistics.cc:
move the python output code to base/stats/puthon.(cc|hh)
and reimplement it as a visitor.
move the text output code to base/stats/text.(cc|hh) and
reimplement it as a visitor.
move the database stuff into base/stats/statdb.(cc|hh) and
get rid of the class. Put everything as globals in the
Statistics::Database namespace.
allocate unique ids for all stats.
directly implement the check routine and get rid of the
various dumping routines since they're now in separate files.
make sure that no two stats have the same name
clean up some loops
base/statistics.hh:
major changes to the statistics package again
lots of code was factored out of statistics.hh into several
separate files in base/stats/ (this will continue)
There are now two Stat package types Result and Counter that
are specified to allow the user to keep the counted type
separate from the result type. They are currently both doubles
but that's an experiment. There is no more per stat ability to
set the type. Statistics::Counter is not the same as Counter!
Implement a visitor for statistics output so that new output
types can be implemented independently from the stats package
itself.
Add a unique id to each stat so that it can be used to keep
track of stats more simply. This number can also be used in
debugging problems with stats.
Tweak the bucket size stuff a bit to make it work better.
fixed VectorDist size bug
cpu/memtest/memtest.cc:
Fix up for changes in stats package
Don't use value() since it doesn't work with binning. If you
want a number as a stat, and to use it in the program itself,
you really want two separate variables, one that's a stat,
and one that's not.
cpu/memtest/memtest.hh:
Fix up for changes in stats package
test/Makefile:
Try to build stuff now that directories matter
test/stattest.cc:
test all new output types
choose which one with command line options
--HG--
extra : convert_revision : e3a3f5f0828c67c0e2de415d936ad240adaddc89
Turbolaser)
base/range.hh:
Change semantics of range to be inclusive of the end value, may need to
check other users of range to make sure they are semantically correct.
This was needed for access of last byte in range of address on IDE and
makes sense for case of range from 0 to all f
dev/ide_ctrl.cc:
dev/ide_ctrl.hh:
dev/ide_disk.cc:
dev/ide_disk.hh:
Whole mess of changes.. at current state simulator will boot and read
partition table and then have a bunch of errors and panic
dev/pciconfigall.cc:
dev/pciconfigall.hh:
dev/platform.hh:
Changes to work with platform separation
dev/tsunami.cc:
dev/tsunami.hh:
Change to work with platform separation
--HG--
extra : convert_revision : e1de22b54df7fdcf391efc2a8555ada93f46beab
- Add support for assigning NULL to SimObject pointers. In Python,
this is a special value, distinct from None.
- Initial, incomplete pass at regenerating C++ parameter code (declarations
and INIT_PARAM macros) from .odesc files.
util/config/m5config.py:
- Add support for assigning NULL to SimObject pointers. In Python,
this is a special value, distinct from None.
- Initial, incomplete pass at regenerating C++ parameter code (declarations
and INIT_PARAM macros) from .odesc files.
--HG--
extra : convert_revision : d7ae8f32e30b3c0829fd1a60589dd998e2e0d0d7
base/range.hh:
andrew thought this might be a bug.
dev/etherpkt.cc:
don't need std:: since there is a using directive
dev/ns_gige.cc:
update to new PIO and PCI system
dev/ns_gige.hh:
update to deal with new PIO and PCI setup
dev/ns_gige_reg.h:
Add some new #defines that I ended up needing
dev/pcidev.cc:
some changes to the debugging printfs of pci device
--HG--
extra : convert_revision : 955ba8e8e1c418cfe1c6549dc3451ea091541556
and 'type') to be specified via instance name and not just
config class. Old code only did instance-name lookup for
SimObject parameters. This feature makes life easier for
transitioning to the Python script-based config.
sim/builder.cc:
Use ConfigNode::find to look for "type" parameter so it can
be found if set under instance name (not config class).
sim/param.cc:
Make Param<bool> accept "1" for true and "0" for false.
--HG--
extra : convert_revision : f40d0878d0f03b2e216f0506c05d0e52db608cca
Also missed renames in a bunch of config files somehow.
(See previous changeset for list of renames.)
arch/alpha/alpha_memory.cc:
arch/alpha/ev5.cc:
arch/alpha/faults.hh:
cpu/exec_context.cc:
cpu/exec_context.hh:
cpu/simple_cpu/simple_cpu.hh:
More {Itb,Dtb} -> {ITB,DTB} renames (forgot to test build KERNEL).
--HG--
extra : convert_revision : b2c6ca0916b72b59895520fcacaf028667560a0d
configuration unnecessarily awkward. Biggest changes are:
- External and internal object names now match in all cases. The
macros still allow them to be different; the only reason I didn't
get rid of that is that the macros themselves should be going away
soon. In the few conflicting cases, I sometimes renamed the C++ object
and sometimes renamed the config object. The latter sets of substitions
are:
s/BaseBus/Bus/;
s/MemoryObject/FunctionalMemory/;
s/MemoryControl/MemoryController/;
s/FUPool/FuncUnitPool/;
- SamplingCPU is temporarily broken... we need to change the model
of how this works in the .ini file. Having it as a CPU proxy is
really awkward.
arch/alpha/alpha_memory.cc:
arch/alpha/alpha_memory.hh:
cpu/simple_cpu/simple_cpu.cc:
sim/process.cc:
Rename objects to match config name.
cpu/base_cpu.cc:
Uncomment SimObject define since SamplingCPU no longer
does this for us.
dev/ethertap.cc:
Use unsigned instead of uint16_t for params.
kern/tru64/tru64_system.cc:
Use unsigned instead of uint64_t for init_param param.
test/paramtest.cc:
Fix old SimObjectParam.
--HG--
extra : convert_revision : 378ebbc6a71ad0694501d09979a44d111a59e8dc
