Commit graph

177 commits

Author SHA1 Message Date
Wendy Elsasser
ca0fd665dc mem: Update DRAM configuration names
Names of DRAM configurations were updated to reflect both
the channel and device data width.

Previous naming format was:
	<DEVICE_TYPE>_<DATA_RATE>_<CHANNEL_WIDTH>

The following nomenclature is now used:
	<DEVICE_TYPE>_<DATA_RATE>_<n>x<w>
where n = The number of devices per rank on the channel
      x = Device width

Total channel width can be calculated by n*w

Example:
A 64-bit DDR4, 2400 channel consisting of 4-bit devices:
	n = 16
	w = 4
The resulting configuration name is:
	DDR4_2400_16x4

Updated scripts to match new naming convention.

Added unique configurations for DDR4 for:
1) 16x4
2) 8x8
3) 4x16

Change-Id: Ibd7f763b7248835c624309143cb9fc29d56a69d1
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
2017-02-14 15:09:18 -06:00
Andreas Sandberg
2974dc7a37 python: Move native wrappers to the _m5 namespace
Swig wrappers for native objects currently share the _m5.internal name
space with Python code. This is undesirable if we ever want to switch
from Swig to some other framework for native binding (e.g., PyBind11
or Boost::Python). This changeset moves all of such wrappers to the
_m5 namespace, which is now reserved for native code.

Change-Id: I2d2bc12dbc05b57b7c5a75f072e08124413d77f3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
2017-01-27 12:40:01 +00:00
Andreas Hansson
2a56260d5d tests: Check for TrafficGen as part of memcheck regression
Since protobuf is still considered optional we do not always have the
TrafficGen. Check before running the memcheck regression.
2016-11-30 11:15:21 -05:00
Andreas Hansson
4cf7f6c4ca tests, ruby: Move rubytests from ALPHA (linux) to NULL (none)
This patch avoids compiling ALPHA six times as part of running
'util/regress', and instead relis on NULL with different protocols to
run the rubytest. All we need is the memory system, so there is really
no need to compile the ISA over and over again.

The one downside is the removal of running 'hello' for the variuos
ALPHA and protocol combinations, but if this is a concern we should
rather beef up the synthetic tests for the variuos protocols.

--HG--
rename : build_opts/NULL => build_opts/NULL_MESI_Two_Level
rename : build_opts/NULL => build_opts/NULL_MOESI_CMP_directory
rename : build_opts/NULL => build_opts/NULL_MOESI_CMP_token
rename : build_opts/NULL => build_opts/NULL_MOESI_hammer
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/config.ini => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MESI_Two_Level/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simerr => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MESI_Two_Level/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/simout => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MESI_Two_Level/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MESI_Two_Level/stats.txt => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MESI_Two_Level/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_directory/config.ini => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_directory/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_directory/simerr => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_directory/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_directory/simout => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_directory/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_directory/stats.txt => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_directory/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_token/config.ini => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_token/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_token/simerr => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_token/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_token/simout => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_token/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_CMP_token/stats.txt => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_CMP_token/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_hammer/config.ini => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_hammer/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_hammer/simerr => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_hammer/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_hammer/simout => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_hammer/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby-MOESI_hammer/stats.txt => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby-MOESI_hammer/stats.txt
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby/config.ini => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby/config.ini
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby/simerr => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby/simerr
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby/simout => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby/simout
rename : tests/quick/se/60.rubytest/ref/alpha/linux/rubytest-ruby/stats.txt => tests/quick/se/60.rubytest/ref/null/none/rubytest-ruby/stats.txt
2016-11-17 04:54:16 -05:00
Andreas Hansson
2f5262eb67 config: Make configs/common a Python package
Continue along the same line as the recent patch that made the
Ruby-related config scripts Python packages and make also the
configs/common directory a package.

All affected config scripts are updated (hopefully).

Note that this change makes it apparent that the current organisation
and naming of the config directory and its subdirectories is rather
chaotic. We mix scripts that are directly invoked with scripts that
merely contain convenience functions. While it is not addressed in
this patch we should follow up with a re-organisation of the
config structure, and renaming of some of the packages.
2016-10-14 10:37:38 -04:00
Andreas Hansson
68fdccb30b ruby: Fix regressions and make Ruby configs Python packages
This patch moves the addition of network options into the Ruby module
to avoid the regressions all having to add it explicitly. Doing this
exposes an issue in our current config system though, namely the fact
that addtoPath is relative to the Python script being executed. Since
both example and regression scripts use the Ruby module we would end
up with two different (relative) paths being added. Instead we take a
first step at turning the config modules into Python packages, simply
by adding a __init__.py in the configs/ruby, configs/topologies and
configs/network subdirectories.

As a result, we can now add the top-level configs directory to the
Python search path, and then use the package names in the various
modules. The example scripts are also updated, and the messy
path-deducing variations in the scripts are unified.
2016-10-13 03:17:19 -04:00
Andreas Hansson
080d4e08d6 mem: Add snoop filter to SystemXBar by default
This patch changes the default behaviour of the SystemXBar, adding a
snoop filter. With the recent updates to the snoop filter allocation
behaviour this change no longer causes problems for the regressions
without caches.

Change-Id: Ibe0cd437b71b2ede9002384126553679acc69cc1
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2016-08-12 14:11:45 +01:00
Andreas Sandberg
1a65e94636 tests: Remove working dir assumption in tgen tests
The traffic generator tests currently assume that they are run from
the root of the source directory. This sometimes breaks tests when
they are run using the new test framework.

Change-Id: I6538a7902694c5d2c980295e076ea1c09acc4291
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
2016-06-02 15:20:24 +01:00
Stephan Diestelhorst
71a02f624e mem, config: Selective use of snoop filter
Disable the default snoop filter in the SystemXBar so that the
typical membus does not have a snoop filter by default. Instead,
add the snoop filter only when there are caches added to the system
(with the caches / l2cache options).

The underlying problem is that the snoop filter grows without
bounds (for now) if there are no caches to tell it that lines have
been evicted. This causes slow regression runs for all the atomic
regressions. This patch fixes this behaviour.

--HG--
extra : source : f97c20511828209757440839ed48d741d02d428f
2016-05-27 17:05:58 +01:00
Andreas Sandberg
8b412fcfd6 tests: Enable test running outside of gem5's source tree
The learning gem5 scripts currently assumes that the current working
directory is the root of gem5's source tree. This isn't necessarily
the case when running the tests using gem5's new test runner.

Change-Id: Ief569bbe77b1b3e2b0fb0e6c575fb0705bbba9b3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
2016-05-09 11:32:07 +01:00
Andreas Hansson
8845aae4da tests: Add a basic memcheck regression
This patch adds a simple regression that calls the existing
memcheck.py script.

--HG--
rename : tests/configs/learning-gem5-p1-simple.py => tests/configs/memcheck.py
rename : tests/quick/se/70.tgen/test.py => tests/quick/se/51.memcheck/test.py
2016-04-25 03:46:12 -04:00
Jason Power
bf7e27fe45 tests: Update learning gem5 tests scripts with copyright 2016-04-21 17:25:31 -05:00
Steve Reinhardt
dc8018a5c3 style: remove trailing whitespace
Result of running 'hg m5style --skip-all --fix-white -a'.
2016-02-06 17:21:18 -08:00
Brad Beckmann
97a5e5b25e ruby: changed all references to numCPs to num-cp 2016-01-22 10:42:12 -05:00
Tony Gutierrez
1a7d3f9fcb gpu-compute: AMD's baseline GPU model 2016-01-19 14:28:22 -05:00
Brad Beckmann
634f34d3f2 regress: updates required for the compute-gpu patches 2015-12-11 16:07:01 -05:00
Andreas Sandberg
17dbb49294 tests: Update SMT tests to correctly configure CPUs
The 01.hello-2T-smt test case for the O3 CPU didn't correctly setup
the number of threads before creating interrupt controllers, which
confused the constructor in BaseCPU. This changeset adds SMT support
to the test configuration infrastructure.

--HG--
rename : tests/configs/o3-timing.py => tests/configs/o3-timing-mt.py
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/config.ini => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/config.ini
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/simerr => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/simerr
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/simout => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/simout
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/stats.txt => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/stats.txt
2015-10-05 13:13:23 -05:00
Mitch Hayenga
a5c4eb3de9 isa,cpu: Add support for FS SMT Interrupts
Adds per-thread interrupt controllers and thread/context logic
so that interrupts properly get routed in SMT systems.
2015-09-30 11:14:19 -05:00
Jason Lowe-Power
29dd04cfe9 tests: Add tests for the Learning gem5 scripts
These tests will ensure that Learning gem5 scripts are always up to date with
the changes in the mainline of gem5.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-09-16 09:35:36 -05:00
Andreas Sandberg
a3f49f60c7 mem: Move trace functionality from the CommMonitor to a probe
This changeset moves the access trace functionality from the
CommMonitor into a separate probe. The probe can be hooked up to any
component that exports probe points of the type ProbePoints::Packet.

This patch moves the dependency on Google's Protocol Buffers library
from the CommMonitor to the MemTraceProbe, which means that the
CommMonitor (including stack distance profiling) no long depends on
it.
2015-08-04 10:29:13 +01:00
Andreas Sandberg
022e69e6de mem: Redesign the stack distance calculator as a probe
This changeset removes the stack distance calculator hooks from the
CommMonitor class and implements a stack distance calculator as a
memory system probe instead. The probe can be hooked up to any
component that exports probe points of the type ProbePoints::Packet.
2015-08-04 10:29:13 +01:00
Andreas Sandberg
decd6b958e tests: Add Minor to the ARM full switcheroo tests
Add the Minor CPU to the RealView and RealView64 full switcheroo
tests.
2015-07-30 10:16:28 +01:00
Andreas Sandberg
f16c0a4a90 sim: Decouple draining from the SimObject hierarchy
Draining is currently done by traversing the SimObject graph and
calling drain()/drainResume() on the SimObjects. This is not ideal
when non-SimObjects (e.g., ports) need draining since this means that
SimObjects owning those objects need to be aware of this.

This changeset moves the responsibility for finding objects that need
draining from SimObjects and the Python-side of the simulator to the
DrainManager. The DrainManager now maintains a set of all objects that
need draining. To reduce the overhead in classes owning non-SimObjects
that need draining, objects inheriting from Drainable now
automatically register with the DrainManager. If such an object is
destroyed, it is automatically unregistered. This means that drain()
and drainResume() should never be called directly on a Drainable
object.

While implementing the new functionality, the DrainManager has now
been made thread safe. In practice, this means that it takes a lock
whenever it manipulates the set of Drainable objects since SimObjects
in different threads may create Drainable objects
dynamically. Similarly, the drain counter is now an atomic_uint, which
ensures that it is manipulated correctly when objects signal that they
are done draining.

A nice side effect of these changes is that it makes the drain state
changes stricter, which the simulation scripts can exploit to avoid
redundant drains.
2015-07-07 09:51:05 +01:00
Andreas Sandberg
d7a56ee524 tests: Skip SPARC tests if the required binaries are missing
The full-system SPARC tests depend on several binaries that aren't
generally available to the wider community. Flag the tests as skipped
instead of failed if these binaries can't be found.
2015-07-07 09:51:03 +01:00
Andreas Hansson
893533a126 mem: Allow read-only caches and check compliance
This patch adds a parameter to the BaseCache to enable a read-only
cache, for example for the instruction cache, or table-walker cache
(not for x86). A number of checks are put in place in the code to
ensure a read-only cache does not end up with dirty data.

A follow-on patch adds suitable read requests to allow a read-only
cache to explicitly ask for clean data.
2015-07-03 10:14:39 -04:00
Andreas Sandberg
877435950c test, arm: Add scripts to test checkpoints
Add a set of scripts to automatically test checkpointing in the
regression framework. The checkpointing tests are similar to the
switcheroo tests, but instead of switching between CPUs, they
checkpoint the system and restore from the checkpoint again. This is
done at regular intervals, typically while booting Linux.

The implementation is fairly straight forward, with the exception that
we have to work around gem5's inability to restore from a checkpoint
after a system has been instantiated. We work around this by forking
off child processes that does the actual simulation and never
instantiate a system in the parent process unless a maximum checkpoint
count is reached (in which case we just simulate the system to
completion in the parent).

Checkpoint testing is currently only enabled 32- and 64-bit ARM
systems using atomic CPUs.

Note: An unfortunate side-effect of forking is that every new process
will overwrite the stats and terminal output from the previous
process. This means that the output directory only contains data from
the last checkpoint.
2015-03-19 04:06:20 -04:00
Andreas Hansson
36dc93a5fa mem: Move crossbar default latencies to subclasses
This patch introduces a few subclasses to the CoherentXBar and
NoncoherentXBar to distinguish the different uses in the system. We
use the crossbar in a wide range of places: interfacing cores to the
L2, as a system interconnect, connecting I/O and peripherals,
etc. Needless to say, these crossbars have very different performance,
and the clock frequency alone is not enough to distinguish these
scenarios.

Instead of trying to capture every possible case, this patch
introduces dedicated subclasses for the three primary use-cases:
L2XBar, SystemXBar and IOXbar. More can be added if needed, and the
defaults can be overridden.
2015-03-02 04:00:47 -05:00
Andreas Hansson
6563ec8634 cpu: Tidy up the MemTest and make false sharing more obvious
The MemTest class really only tests false sharing, and as such there
was a lot of old cruft that could be removed. This patch cleans up the
tester, and also makes it more clear what the assumptions are. As part
of this simplification the reference functional memory is also
removed.

The regression configs using MemTest are updated to reflect the
changes, and the stats will be bumped in a separate patch. The example
config will be updated in a separate patch due to more extensive
re-work.

In a follow-on patch a new tester will be introduced that uses the
MemChecker to implement true sharing.
2015-02-11 10:23:28 -05:00
Andreas Hansson
de162ad968 tests: Remove deprecated InOrderCPU tests
This patch removes the three MIPS and SPARC regressions that use the
deprecated InOrderCPU.

This is the first step in completely removing the code from the tree,
avoiding confusion, and focusing all development efforts on the
MinorCPU. Brave new world.
2015-01-20 08:12:02 -05:00
Andreas Hansson
e76e8e28a3 tests: Add a regression for the stack distance calculator
Re-use the existing traffic generator regression, and enable the stack
distance calculation in the comm monitor, along with the verification
stack.

The traffic generator config is also tuned to not increase the
run-time too much (and actually have some address re-use).
2014-12-23 09:31:18 -05:00
Nilay Vaish
3022d463fb ruby: interface with classic memory controller
This patch is the final in the series.  The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system.  This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs.  Classic's memory controller is more up to date and
supports multiple different types of DRAM.  This also brings classic and
ruby ever more close.  The patch also changes ruby's memory controller to
expose the same interface.
2014-11-06 05:42:21 -06:00
Nilay Vaish
95a0b18431 ruby: single physical memory in fs mode
Both ruby and the system used to maintain memory copies.  With the changes
carried for programmed io accesses, only one single memory is required for
fs simulations.  This patch sets the copy of memory that used to reside
with the system to null, so that no space is allocated, but address checks
can still be carried out.  All the memory accesses now source and sink values
to the memory maintained by ruby.
2014-11-06 05:41:44 -06:00
Ali Saidi
f2db2a96d1 arm, tests: Update config files to more recent kernels and create 64-bit regressions.
This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.

In addition a set of 64-bit ARM regressions have been added to the regression system.
2014-10-29 23:18:27 -05:00
Andreas Hansson
2b0438a11e tests: Use more representative configs for ARM tests
This patch changes the CPU and cache configurations used in the ARM SE and FS
regressions to make them more representative, and also get better code
coverage by exercising different replacement policies and use an L2
prefetcher.
2014-09-20 17:18:33 -04:00
Andreas Hansson
1f6d5f8f84 mem: Rename Bus to XBar to better reflect its behaviour
This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.

As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.

--HG--
rename : src/mem/Bus.py => src/mem/XBar.py
rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc
rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh
rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc
rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh
rename : src/mem/bus.cc => src/mem/xbar.cc
rename : src/mem/bus.hh => src/mem/xbar.hh
2014-09-20 17:18:32 -04:00
Andreas Hansson
1884bcc03b tests: Add a memtest version using the ideal SnoopFilter
This patch adds a basic regression test for the snoop filter.

--HG--
rename : tests/configs/memtest.py => tests/configs/memtest-filter.py
2014-09-20 17:18:30 -04:00
Andreas Hansson
351e146b37 alpha: Stop using 'inorder' and rely entirely on 'minor'
This patch avoids building the 'inorder' CPU model for any permutation
of ALPHA, and also removes the ALPHA regressions using the 'inorder'
CPU. The 'minor' CPU is already providing a broader test coverage.
2014-09-03 07:42:56 -04:00
Andreas Hansson
ee68c2b302 tests: Use O3_ARM_v7a config for full-system ARM regressions
This patch changes the CPU configuration used for the full-system ARM
regressions to increase the test coverage. Note that it is only the
core configuration, and not the caches etc.
2014-09-03 07:42:41 -04:00
Emilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
01f792a367 ruby: Fixes clock domains in configuration files
This patch fixes scripts related to ruby by adding the ruby clock domain.
Now the L1 controllers and  the Sequencer shares the cpu clock domain,
while the rest of the components use the ruby clock domain.

Before this patch, running simulations with the cpu clock set at 2GHz or
1GHz will output the same time results and could distort power measurements.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-01 16:55:30 -05:00
Andrew Bardsley
5d0b25ba3f cpu: Minor CPU add regression tests for ARM and ALPHA
This patch adds regression tests results and test harnesses
for the Minor CPU on ARM and ALPHA.
2014-07-23 16:09:05 -05:00
Andreas Hansson
64806c4c13 tests: Reflect name change in DRAM tests
This patch reflects the recent name change in the DRAM TrafficGen
tests and also tidies up the test directory.

--HG--
rename : tests/configs/tgen-simple-dram.py => tests/configs/tgen-dram-ctrl.py
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/config.ini => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/config.ini
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simerr => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simerr
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/simout => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/simout
rename : tests/quick/se/70.tgen/ref/null/none/tgen-simple-dram/stats.txt => tests/quick/se/70.tgen/ref/null/none/tgen-dram-ctrl/stats.txt
rename : tests/quick/se/70.tgen/tgen-simple-dram.cfg => tests/quick/se/70.tgen/tgen-dram-ctrl.cfg
2014-05-09 18:58:49 -04:00
Sascha Bischoff
e940bac278 mem: Auto-generate CommMonitor trace file names
Splits the CommMonitor trace_file parameter into three parameters. Previously,
the trace was only enabled if the trace_file parameter was set, and would be
written to this file. This patch adds in a trace_enable and trace_compress
parameter to the CommMonitor.

No trace is generated if trace_enable is set to False. If it is set to True, the
trace is written to a file based on the name of the SimObject in the simulation
hierarchy. For example, system.cluster.il1_commmonitor.trc. This filename can be
overridden by additionally specifying a file name to the trace_file parameter
(more on this later).

The trace_compress parameter will append .gz to any filename if set to True.
This enables compression of the generated traces. If the file name already ends
in .gz, then no changes are made.

The trace_file parameter will override the name set by the trace_enable
parameter. In the case that the specified name does not end in .gz but
trace_compress is set to true, .gz is appended to the supplied file name.
2014-05-09 18:58:46 -04:00
Nilay Vaish
b5cc4c7604 config: ruby: rename _cpu_ruby_ports to _cpu_ports 2014-03-20 09:14:14 -05:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Nilay Vaish
9b3418d163 ruby: no piobus in se mode
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages).  This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
2014-03-20 08:03:09 -05:00
Nilay Vaish
8504b079b8 ruby: correct errors in changeset 4eec7bdde5b0
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created.  RubyPort, which earlier used to ignore range changes now
forwards those to the piobus.  The lack of piobus resulted in segmentation
fault.  This patch creates a piobus even in se mode.  It is not created only
when some tester is running.  Secondly,  I had missed out on modifying port
connections for other coherence protocols.
2014-02-24 20:50:05 -06:00
Nilay Vaish
7e27860ef4 ruby: route all packets through ruby port
Currently, the interrupt controller in x86 is connected to the io bus
directly.  Therefore the packets between the io devices and the interrupt
controller do not go through ruby.  This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination.  Note that the patch does not make these packets go through the
ruby network.  That would happen in a subsequent patch.
2014-02-23 19:16:16 -06:00
Steve Reinhardt
a212844f67 config, x86: move kernel specification from tests to FSConfig.py
For some reason, the default x86 kernel is specified in
tests/configs/x86_generic.py and not in configs/common/FSConfig.py,
where the kernels for all the other ISAs are.  This means that
running configs/example/fs.py for x86 fails because no kernel
is specified.  Moving the specification over fixes this problem.

There is another problem that this uncovers, which is that going
past the init stage (i.e., past where the regression test stops)
fails because the fsck test on the disk device fails, but that's
a separate issue.
2014-01-03 17:08:44 -08:00
Steve Reinhardt
a2c21d47a8 tests: suppress output on switcheroo tests
The output from the switcheroo tests is voluminous and
(because it includes timestamps) highly sensitive to
minor changes, leading to extremely large updates to the
reference outputs.  This patch addresses this problem
by suppressing output from the tests.  An internal
parameter can be set to enable the output.  Wiring that
up to a command-line flag (perhaps even the rudimantary
-v/-q options in m5/main.py) is left for future work.
2013-11-14 15:03:42 -08:00
Andreas Hansson
9145e2cfd4 test: Use SimpleMemory for atomic full-system tests
Keep it simple and use the SimpleMemory rather than the DRAM
controller model for atomic full-system tests.
2013-11-01 11:56:14 -04:00