Make sure all command-line targets and EXTRAS directories
are interpreted relative to the launch directory. This
turns out to be very useful when building code from an
EXTRAS directory using SCons's -C option.
We were trying to do this with targets but it didn't actually
work since we didn't update BUILD_TARGETS (so SCons got
confused internally). We weren't even trying with EXTRAS.
To simplify the code, the default target is also interpreted
relative to the launch dir even though it was explicitly
handled as relative to the m5 dir before... I doubt anyone
really uses this anyway so it didn't seem worth the complexity.
(Maybe we should get rid of it?)
Currently the --default= option only looks at the predefined
build configs (in m5/build_opts), so you're limited to basing
a new build config off of those (ALPHA_SE, etc.). If you've
already defined a non-standard build config and want to clone
it or tweak it, you have to start from scratch. This patch
causes --default= to look first among the existing builds
(in build/variables) before looking in build_opts so you
can specify an existing non-standard build config as a
starting point for a new config.
FastAlloc's reuse policies can mask allocation bugs, so
we typically want it disabled when debugging. Set
FORCE_FAST_ALLOC to enable even when debugging, and set
NO_FAST_ALLOC to disable even in non-debug builds.
This causes a lot of rebuilds that could have otherwise possibly been
avoided, and, more annoyingly, a lot of unnecessary rerunning of the
regressions. The benefits of having the revision in the output haven't
materialized, so this change removes it.
The global sticky options were being printed with a heading, and then the
global nonsticky options were being printed immediately after them without a
heading. Because the two lists ran together and the first had its own heading,
it looked like -all- those options where sticky even though some of them
aren't. This change adds a label to the second list so it's clear they're
different.
I've renamed the check_whitespace operation to check_style. You're going to
need to change your .hg/hgrc file. While you're at it, add a pre-qrefresh
hook please.
I like the brevity of Ali's recent change, but the ambiguity of
sometimes showing the source and sometimes the target is a little
confusing. This patch makes scons typically list all sources and
all targets for each action, with the common path prefix factored
out for brevity. It's a little more verbose now but also more
informative.
Somehow Ali talked me into adding colors too, which is a whole
'nother story.
clean up the code a little bit while we're at it.
I recommend that everyone adds the pre-qrefresh hook below since it
will make qref run the style hook and not just commit/qpush
[extensions]
style = <m5 path>/util/style.py
[hooks]
pretxncommit.style = python:style.check_whitespace
pre-qrefresh.style = python:style.check_whitespace
The arguments were added to the global_sticky_vars Variables object after the
basic help text was generated. As a result, the "actual:" value wouldn't
reflect the arguments to scons and wouldn't really be the "actual" value used
by the build. This change fixes that by updating global_sticky_vars slightly
earlier.
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.
--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
Add the PROTOCOL sticky option sets the coherence protocol that slicc
will parse and therefore ruby will use. This whole process was made
difficult by the fact that the set of files that are output by slicc
are not easily known ahead of time. The easiest thing wound up being
to write a parser for slicc that would tell me. Incidentally this
means we now have a slicc grammar written in python.
Start by turning all of the *Source functions into classes
so we can do more calculations and more easily collect the data we need.
Add parameters to the new classes for indicating what sorts of flags the
objects should be compiled with so we can allow certain files to be compiled
without Werror for example.
env is used as a local variable all over the place and sometimes it is
easy to get confused as to whether the global env or local env is being
used. This will become especially important when I change the way we
support our variants.
1) -L is automatically added, so don't do it ourselves
2) prepend the paths for gzstream and libelf so they are certain to
come first. The problem is that python might add /usr/lib to the path
and the user might have a locally installed version of libelf installed.
Add some features to read_command so it works a little bit better
Clean up the mercurial checks.
Filter the user environment and only pick out the useful stuff.
This allows me to clean things up so we are up to date with respect to
deprecated features. There are many features scheduled for permanent failure
in scons 2.0 and 0.98.1 provides the most compatability for that. It
also paves the way for some nice new features that I will add soon
The gzstream package provides an ostream-interface for writing gzipped files.
The package comes from:
http://www.cs.unc.edu/Research/compgeom/gzstream/
And is distributed under the LGPL license. Both the license and version
information has been preservered, though all other files in the package have
been purged. Minor modifications to the code have been made. The output module
detects when a filename ends in .gz and constructs an ogzstream object instead
of an ofstream object. This works for both the create(...) and find(...)
commands. Additionally, since gzstream objects needs to be closed to ensure
proper file termination, I have the output deconstructor deleting all ostream's
that it manages on behalf of find(...). At the moment, the only output file
that I know this functionality works for is stats, i.e. by specifying
"--stats-file=m5stats.txt.gz" on the command line.
The current EXTRAS will fail if the top level directory pointed to by EXTRAS
has a SConscript file in it. We allow this by including the directory name
of the EXTRA in the build directory which prevents a clash between
src/SConscript and extra/SConscript. Maintain compatibility with older uses
of EXTRAS by adding a -I for each top level extra directory.
This should allow m5 to be more easily embedded into other simulators.
The m5 binary adds a simple main function which then calls into the m5
libarary to start the simulation. In order to make this work
correctly, it was necessary embed python code directly into the
library instead of the zipfile hack. This is because you can't just
append the zipfile to the end of a library the way you can a binary.
As a result, Python files that are part of the m5 simulator are now
compile, marshalled, compressed, and then inserted into the library's
data section with a certain symbol name. Additionally, a new Importer
was needed to allow python to get at the embedded python code.
Small additional changes include:
- Get rid of the PYTHONHOME stuff since I don't think anyone ever used
it, and it just confuses things. Easy enough to add back if I'm wrong.
- Create a few new functions that are key to initializing and running
the simulator: initSignals, initM5Python, m5Main.
The original code for creating libm5 was inspired by a patch Michael
Adler, though the code here was done by me.
Requires pushing source files down into 'src' subdir relative
to directory listed in EXTRAS.
--HG--
extra : convert_revision : ca04adc3e24c60bd3e7b63ca5770b31333d76729
Nag the user during compile if they have an hg cloned copy of M5, have
mercurial installed, but don't have the style hook enabled.
--HG--
extra : convert_revision : 6bcbb67f1a3fcd36db7d3ef16a9ff19680f126f2
remove the old scanner and replace it with ours instead of just adding ours,
this fixes some issues with dependency tracking.
--HG--
extra : convert_revision : 925d42ad024deaea48a243067d0ea9542aeba324
SConstruct:
export env after we've set CC/CXX
ext/libelf/SConscript:
pull in the CC/CXX variables from env. Use gm4 if it exists
ext/libelf/elf_begin.c:
ext/libelf/libelf_allocate.c:
include errno.h instead of sys/errno.h
ext/libelf/elf_common.h:
use the more standard uintX_t
ext/libelf/elf_strptr.c:
ext/libelf/elf_update.c:
include sysmacros.h on Solaris for roundup()
--HG--
extra : convert_revision : ea1aab834029399c445dfa4c9f78febf2c3d8f0c
automatic. The point is that now a subdirectory can be added
to the build process just by creating a SConscript file in it.
The process has two passes. On the first pass, all subdirs
of the root of the tree are searched for SConsopts files.
These files contain any command line options that ought to be
added for a particular subdirectory. On the second pass,
all subdirs of the src directory are searched for SConscript
files. These files describe how to build any given subdirectory.
I have added a Source() function. Any file (relative to the
directory in which the SConscript resides) passed to that
function is added to the build. Clean up everything to take
advantage of Source().
function is added to the list of files to be built.
--HG--
extra : convert_revision : 103f6b490d2eb224436688c89cdc015211c4fd30
SConstruct:
src/SConscript:
Add flags for Intel CC while i'm at it
src/base/compiler.hh:
the _Pragma stuff needst to be called this way unless someone happens to have a cleaner way
src/base/cprintf_formats.hh:
add std:: where appropriate
src/base/statistics.hh:
use this->map since icc was getting confused about std::map vs the locally defined map
src/cpu/static_inst.hh:
Add some more dummy returns where needed
src/mem/packet.hh:
add more dummy returns where needed
src/sim/host.hh:
use limits to come up with max tick
--HG--
extra : convert_revision : 08e9f7898b29fb9d063136529afb9b6abceab60c
pretty close to compiling w/ suns compiler
briefly:
add dummy return after panic()/fatal()
split out flags by compiler vendor
include cstring and cmath where appropriate
use std namespace for string ops
SConstruct:
Add code to detect compiler and choose cflags based on detected compiler
Fix zlib check to work with suncc
src/SConscript:
split out flags by compiler vendor
src/arch/sparc/isa/decoder.isa:
use correct namespace for sqrt
src/arch/sparc/isa/formats/basic.isa:
add dummy return around panic
src/arch/sparc/isa/formats/integerop.isa:
use correct namespace for stringops
src/arch/sparc/isa/includes.isa:
include cstring and cmath where appropriate
src/arch/sparc/isa_traits.hh:
remove dangling comma
src/arch/sparc/system.cc:
dummy return to make sun cc front end happy
src/arch/sparc/tlb.cc:
src/base/compression/lzss_compression.cc:
use std namespace for string ops
src/arch/sparc/utility.hh:
no reason to say something is unsigned unsigned int
src/base/compression/null_compression.hh:
dummy returns to for suncc front end
src/base/cprintf.hh:
use standard variadic argument syntax instead of gnuc specefic renaming
src/base/hashmap.hh:
don't need to define hash for suncc
src/base/hostinfo.cc:
need stdio.h for sprintf
src/base/loader/object_file.cc:
munmap is in std namespace not null
src/base/misc.hh:
use M5 generic noreturn macros
use standard variadic macro __VA_ARGS__
src/base/pollevent.cc:
we need file.h for file flags
src/base/random.cc:
mess with include files to make suncc happy
src/base/remote_gdb.cc:
malloc memory for function instead of having a non-constant in an array size
src/base/statistics.hh:
use std namespace for floor
src/base/stats/text.cc:
include math.h for rint (cmath won't work)
src/base/time.cc:
use suncc version of ctime_r
src/base/time.hh:
change macro to work with both gcc and suncc
src/base/timebuf.hh:
include cstring from memset and use std::
src/base/trace.hh:
change variadic macros to be normal format
src/cpu/SConscript:
add dummy returns where appropriate
src/cpu/activity.cc:
include cstring for memset
src/cpu/exetrace.hh:
include cstring fro memcpy
src/cpu/simple/base.hh:
add dummy return for panic
src/dev/baddev.cc:
src/dev/pciconfigall.cc:
src/dev/platform.cc:
src/dev/sparc/t1000.cc:
add dummy return where appropriate
src/dev/ide_atareg.h:
make define work for both gnuc and suncc
src/dev/io_device.hh:
add dummy returns where approirate
src/dev/pcidev.hh:
src/mem/cache/cache_impl.hh:
src/mem/cache/miss/blocking_buffer.cc:
src/mem/cache/tags/lru.hh:
src/mem/cache/tags/split.hh:
src/mem/cache/tags/split_lifo.hh:
src/mem/cache/tags/split_lru.hh:
src/mem/dram.cc:
src/mem/packet.cc:
src/mem/port.cc:
include cstring for string ops
src/dev/sparc/mm_disk.cc:
add dummy return where appropriate
include cstring for string ops
src/mem/cache/miss/blocking_buffer.hh:
src/mem/port.hh:
Add dummy return where appropriate
src/mem/cache/tags/iic.cc:
cast hastSets to double for log() call
src/mem/physical.cc:
cast pmemAddr to char* for munmap
src/sim/byteswap.hh:
make define work for suncc and gnuc
--HG--
extra : convert_revision : ef8a1f1064e43b6c39838a85c01aee4f795497bd
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
files so the directories can easily be deleted.
Remove the FullCPU from the ALL_CPU_LIST and only add it if
it exists.
--HG--
extra : convert_revision : b16f56bb92a0063803c5099732dc289fe4363768
SConstruct:
Put the code to make a switching header directory into a function so they are easy to make.
src/arch/SConscript:
Replace switching header code with the new function call.
src/kern/SConscript:
Created a new switching header directory in kern, and moved the declaration of some source files here.
--HG--
rename : src/kern/kernel_stats.cc => src/kern/base_kernel_stats.cc
rename : src/kern/kernel_stats.hh => src/kern/base_kernel_stats.hh
extra : convert_revision : 98f5320a5ade567c3e4f67fef123dfb0c5122545
SConstruct:
Add check to see if we need to include libsocket
src/arch/sparc/floatregfile.cc:
src/arch/sparc/intregfile.cc:
use memset rather than bzero and include the appropriate headerfile
src/base/pollevent.cc:
If we're compling under solaris we need sys/file.h
src/base/random.cc:
src/base/random.hh:
solaris doesn't have random(), so use rint with the correct rounding mode
if we're compiling on solaris
src/base/stats/flags.hh:
u_int32_t??
src/base/time.hh:
grab the timersub() define from freebsd since it doesn't exist in solaris
src/cpu/inst_seq.hh:
we don't need to include stdint here
src/sim/byteswap.hh:
the method to detect endianness on Solaris is a little more complex...
--HG--
extra : convert_revision : 6b7db0e900e7bccfc250d65c125065f27280dda1
running SCons, make it into a sticky option that can be
overridden at build time, and set it up before the interpreter
is started. Also, fix the code that turns sticky options into
config/*.hh so that it works with types other than bool.
--HG--
extra : convert_revision : 602398b35d4da4e813f78865678ed348fdea7270
setup is correct and provide meeaningful error messages when it's not.
Also fix for building on Cygwin where python lib is in /bin and not /lib.
--HG--
extra : convert_revision : 7a29ba17463de60c72b3d8b04e4c4f81fc64bf61
Add checks for swig & libz, version check for swig.
Factor out version check code into function, use for mysql too.
SConstruct:
Add checks for swig & libz, version check for swig.
Factor out version check code into function, use for mysql too.
--HG--
extra : convert_revision : a077d961ae52011141fbf5021b167485f8638139
rename build/*/test dir to build/*/tests for consistency
SConstruct:
rename build/*/test dir to build/*/tests for consistency
--HG--
extra : convert_revision : 6af3cf6b2d6582b2c4d2bc9211e44767e0fa494f
SConstruct:
Make test CPUs option non-sticky.
configs/common/FSConfig.py:
Be sure to set the memory mode.
configs/test/fs.py:
Wrong string.
tests/SConscript:
Only test valid CPUs that have been compiled in.
tests/test1/ref/alpha/atomic/config.ini:
tests/test1/ref/alpha/atomic/config.out:
tests/test1/ref/alpha/atomic/m5stats.txt:
tests/test1/ref/alpha/atomic/stdout:
tests/test1/ref/alpha/detailed/config.ini:
tests/test1/ref/alpha/detailed/config.out:
tests/test1/ref/alpha/detailed/m5stats.txt:
tests/test1/ref/alpha/detailed/stdout:
tests/test1/ref/alpha/timing/config.ini:
tests/test1/ref/alpha/timing/config.out:
tests/test1/ref/alpha/timing/m5stats.txt:
tests/test1/ref/alpha/timing/stdout:
Update output.
--HG--
extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
SConstruct:
Include an option to specify the CPUs being tested.
src/cpu/SConscript:
Checker isn't SMT right now, so don't do SMT tests with the O3CPU if we're using the checker.
src/python/m5/objects/O3CPU.py:
Include default options. Unfortunately FullO3Config.py is still needed because it specifies which FUPool is being used.
tests/SConscript:
Several minor updates (sorry for one commit). Updated the copyright and fixed some m5 style issues. Also added the ability to specify which CPUs to run the tests on.
--HG--
extra : convert_revision : b0b801115705544ea02e572e31314f7bb8b5f0f2
Right now only non-SMT SE regression tests have been added back in. The rest are pending getting SMT working, and consolidating the FS configuration files.
Eventually support for different OSs can be added so you can specify which versions of the binary you want to run from one config file.
Note: mp-test1 doesn't have any reference stats because MP mode doesn't currently work. The test itself should probably work once the code is fixed.
SConstruct:
Updates to allow for regression tests to work via the command line "scons build/ALPHA_SE/test/debug/quick" and such once again.
src/cpu/SConscript:
Keep a list of SMT supporting CPUs so that the regression tests can easily specify which CPUs to use if they are SMT only.
--HG--
extra : convert_revision : 34e6286150aae8f316ae694f6c00be8f510522f2
Use O3CPU when building instead of AlphaO3CPU.
I could use some better python magic in the cpu_models.py file!
AUTHORS:
add middle initial
SConstruct:
change from AlphaO3CPU to O3CPU
src/cpu/SConscript:
edits to build O3CPU instead of AlphaO3CPU
src/cpu/cpu_models.py:
change substitution template to use proper CPU EXEC CONTEXT For O3CPU Model...
Actually, some Python expertise could be used here. The 'env' variable is not
passed to this file, so I had to parse through the ARGV to find the ISA...
src/cpu/o3/base_dyn_inst.cc:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.cc:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.cc:
src/cpu/o3/fetch.cc:
src/cpu/o3/iew.cc:
src/cpu/o3/inst_queue.cc:
src/cpu/o3/lsq.cc:
src/cpu/o3/lsq_unit.cc:
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/rename.cc:
src/cpu/o3/rob.cc:
use isa_specific.hh
src/sim/process.cc:
only initi NextNPC if not ALPHA
src/cpu/o3/alpha/cpu.cc:
alphao3cpu impl
src/cpu/o3/alpha/cpu.hh:
move AlphaTC to it's own file
src/cpu/o3/alpha/cpu_impl.hh:
Move AlphaTC to it's own file ...
src/cpu/o3/alpha/dyn_inst.cc:
src/cpu/o3/alpha/dyn_inst.hh:
src/cpu/o3/alpha/dyn_inst_impl.hh:
include paths
src/cpu/o3/alpha/impl.hh:
include paths, set default MaxThreads to 2 instead of 4
src/cpu/o3/alpha/params.hh:
set Alpha Specific Params here
src/python/m5/objects/O3CPU.py:
add O3CPU class
src/cpu/o3/SConscript:
include isa-specific build files
src/cpu/o3/alpha/thread_context.cc:
NEW HOME of AlphaTC
src/cpu/o3/alpha/thread_context.hh:
new home of AlphaTC
src/cpu/o3/isa_specific.hh:
includes ISA specific files
src/cpu/o3/params.hh:
base o3 params
src/cpu/o3/thread_context.hh:
base o3 thread context
src/cpu/o3/thread_context_impl.hh:
base o3 thead context impl
--HG--
rename : src/cpu/o3/alpha_cpu.cc => src/cpu/o3/alpha/cpu.cc
rename : src/cpu/o3/alpha_cpu.hh => src/cpu/o3/alpha/cpu.hh
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_cpu_impl.hh => src/cpu/o3/alpha/cpu_impl.hh
rename : src/cpu/o3/alpha_dyn_inst.cc => src/cpu/o3/alpha/dyn_inst.cc
rename : src/cpu/o3/alpha_dyn_inst.hh => src/cpu/o3/alpha/dyn_inst.hh
rename : src/cpu/o3/alpha_dyn_inst_impl.hh => src/cpu/o3/alpha/dyn_inst_impl.hh
rename : src/cpu/o3/alpha_impl.hh => src/cpu/o3/alpha/impl.hh
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : d377d6417452ac337bc502f28b2fde907d6b340e
The changes largely are fixing up the memory accesses to use ports/Requests/Packets, supporting the splitting off of instantiation of template classes, and handling some of the reorganization that happened.
OzoneCPU is untested for now but at least compiles. Fixes will be coming shortly.
SConstruct:
Remove OzoneSimpleCPU from list of CPUs.
src/cpu/SConscript:
Leave out OzoneSimpleCPU.
src/cpu/ozone/bpred_unit.cc:
Fixes to get OzoneCPU to compile.
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu.cc:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst.hh:
src/cpu/ozone/dyn_inst_impl.hh:
src/cpu/ozone/front_end.cc:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_back_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/ozone_impl.hh:
src/cpu/ozone/rename_table.cc:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
Fixes to get OzoneCPU back to compiling.
--HG--
extra : convert_revision : 90ffb397263bcf9fea3987317272c64f2b20f7e6
SConstruct:
Remove check for Checker from this SConstruct
src/arch/SConscript:
Specific check if CheckerCPU is being used. Not the cleanest, but works for now.
src/cpu/SConscript:
Code to handle using the CheckerCPU a little better. Allows -c to be used normally.
--HG--
extra : convert_revision : 0a82f16db0f38e5ce114d08368477bd211331fa3
SConstruct:
Fix paths in comments and other minor comment edits.
src/cpu/SConscript:
Fix path in comment.
--HG--
extra : convert_revision : c02aa9cefd8c5ad791ad2f1653c1554a4aa8ffbd
First: Rename FullCPU and its variants in the o3 directory to O3CPU to differentiate from the old model, and also to specify it's an out of order model.
Second: Include build options for selecting the Checker to be used. These options make sure if the Checker is being used there is a CPU that supports it also being compiled.
SConstruct:
Add in option USE_CHECKER to allow for not compiling in checker code. The checker is enabled through this option instead of through the CPU_MODELS list. However it's still necessary to treat the Checker like a CPU model, so it is appended onto the CPU_MODELS list if enabled.
configs/test/test.py:
Name change for DetailedCPU to DetailedO3CPU. Also include option for max tick.
src/base/traceflags.py:
Add in O3CPU trace flag.
src/cpu/SConscript:
Rename AlphaFullCPU to AlphaO3CPU.
Only include checker sources if they're necessary. Also add a list of CPUs that support the Checker, and only allow the Checker to be compiled in if one of those CPUs are also being included.
src/cpu/base_dyn_inst.cc:
src/cpu/base_dyn_inst.hh:
Rename typedef to ImplCPU instead of FullCPU, to differentiate from the old FullCPU.
src/cpu/cpu_models.py:
src/cpu/o3/alpha_cpu.cc:
src/cpu/o3/alpha_cpu.hh:
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_cpu_impl.hh:
Rename AlphaFullCPU to AlphaO3CPU to differentiate from old FullCPU model.
src/cpu/o3/alpha_dyn_inst.hh:
src/cpu/o3/alpha_dyn_inst_impl.hh:
src/cpu/o3/alpha_impl.hh:
src/cpu/o3/alpha_params.hh:
src/cpu/o3/commit.hh:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/regfile.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
src/cpu/o3/thread_state.hh:
src/python/m5/objects/AlphaO3CPU.py:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/cpu.cc:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
Rename FullCPU to O3CPU to differentiate from old FullCPU model.
Also #ifdef the checker code so it doesn't need to be included if it's not selected.
--HG--
rename : src/cpu/checker/o3_cpu_builder.cc => src/cpu/checker/o3_builder.cc
rename : src/cpu/checker/cpu_builder.cc => src/cpu/checker/ozone_builder.cc
rename : src/python/m5/objects/AlphaFullCPU.py => src/python/m5/objects/AlphaO3CPU.py
extra : convert_revision : 86619baf257b8b7c8955efd447eba56e0d7acd6a
into vm1.(none):/home/stever/bk/newmem-py
src/python/m5/__init__.py:
src/sim/syscall_emul.cc:
Hand merge.
--HG--
extra : convert_revision : e2542735323e648383c89382421d98a7d1d761bf
User script now invokes initialization and
simulation loop after building configuration.
These functions are exported from C++ to Python
using SWIG.
SConstruct:
Set up SWIG builder & scanner.
Set up symlinking of source files into build directory
(by not disabling the default behavior).
configs/test/test.py:
Rewrite to use new script-driven interface.
Include a sample option.
src/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
Add SWIG-generated main_wrap.cc to source list.
src/arch/SConscript:
Set up symlinking of source files into build directory
(by not disabling the default behavior).
src/arch/alpha/ev5.cc:
src/arch/alpha/isa/decoder.isa:
src/cpu/o3/alpha_cpu_impl.hh:
src/cpu/trace/opt_cpu.cc:
src/cpu/trace/trace_cpu.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
src/sim/serialize.cc:
src/sim/syscall_emul.cc:
SimExit() is now exitSimLoop().
src/cpu/base.cc:
SimExitEvent is now SimLoopExitEvent
src/python/SConscript:
Add SWIG build command for main.i.
Use python/m5 in build dir as source for zip archive...
easy now with file duplication enabled.
src/python/m5/__init__.py:
- Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
- Get rid of argument parsing code; just provide default
option descriptors for user script to call optparse with.
- Don't clutter m5 namespace by sucking in all of m5.config
and m5.objects.
- Move instantiate() function here from config.py.
src/python/m5/config.py:
- Move instantiate() function to __init__.py.
- Param.Foo deferred type lookups must use m5.objects
namespace now (not m5).
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/AlphaFullCPU.py:
src/python/m5/objects/AlphaTLB.py:
src/python/m5/objects/BadDevice.py:
src/python/m5/objects/BaseCPU.py:
src/python/m5/objects/BaseCache.py:
src/python/m5/objects/Bridge.py:
src/python/m5/objects/Bus.py:
src/python/m5/objects/CoherenceProtocol.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/DiskImage.py:
src/python/m5/objects/Ethernet.py:
src/python/m5/objects/Ide.py:
src/python/m5/objects/IntrControl.py:
src/python/m5/objects/MemObject.py:
src/python/m5/objects/MemTest.py:
src/python/m5/objects/Pci.py:
src/python/m5/objects/PhysicalMemory.py:
src/python/m5/objects/Platform.py:
src/python/m5/objects/Process.py:
src/python/m5/objects/Repl.py:
src/python/m5/objects/Root.py:
src/python/m5/objects/SimConsole.py:
src/python/m5/objects/SimpleDisk.py:
src/python/m5/objects/System.py:
src/python/m5/objects/Tsunami.py:
src/python/m5/objects/Uart.py:
Fix up imports (m5 namespace no longer includes m5.config).
src/sim/eventq.cc:
src/sim/eventq.hh:
Support for Python-called simulate() function:
- Use IsExitEvent flag to signal events that want
to exit the simulation loop gracefully (instead of
calling exit() to terminate the process).
- Modify interface to hand exit event object back to
caller so it can be inspected for cause.
src/sim/host.hh:
Add MaxTick constant.
src/sim/main.cc:
Move copyright notice back to C++ so we can print
it right away, even for interactive sessions.
Use PYTHONPATH environment var to set module path
(instead of clunky code injection method).
Move main control from here into Python:
- Separate initialization code and simulation loop
into separate functions callable from Python.
- Make Python interpreter invocation more pure (more
like directly invoking interpreter).
Add -i and -p flags (only options on binary itself;
other options processed by Python).
Import readline package when using interactive mode.
src/sim/sim_events.cc:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
src/sim/sim_events.hh:
SimExitEvent is now SimLoopExitEvent, and uses
IsSimExit flag to terminate loop (instead of
exiting simulator process).
Get rid of a few unused constructors.
src/sim/sim_exit.hh:
SimExit() is now exitSimLoop().
Get rid of unused functions.
Add comments.
--HG--
extra : convert_revision : 280b0d671516b25545a6f24cefa64a68319ff3d4
is currently in /usr/local instead of /usr).
SConstruct:
Use information from the Python interpreter used to run scons
to find the version & paths for include & library files.
This means that linking with a different interpreter requires
invoking scons with that interpreter... add comment to that effect.
src/sim/main.cc:
Check return codes of Python interpreter calls for errors.
Get rid of include of obsolete header.
--HG--
extra : convert_revision : 90916bd8690fe1e6c9afdb0dfa1aa0d352a73a46
Use embedded zip archive to carry Python code instead
of homegrown embedded string/file mechanism.
Do argument parsing in Python instead of C++.
SConstruct:
Add Python interpreter include path & library.
Define two new simple builders which copy &
concatenate files, respectively, for use by
the Python embedded zipfile code.
src/SConscript:
Encapsulate environment creation in a function.
Add code to append Python zip archive to final executable.
Eliminate references to obsolete files.
src/python/SConscript:
Rewrite to generate embedded zip archive of Python code
(replacing old "embedded string" mechanism).
src/python/m5/__init__.py:
Move main arg-parsing loop here (out of C++ main()).
src/python/m5/config.py:
Minor fix (version incompatibility?).
src/sim/main.cc:
Invoke embedded Python interpreter to parse args
and generate config.ini, replacing C++ arg parsing code.
--HG--
extra : convert_revision : 72d21236b2bee139ff39ba4cf031a4a1f8560029
SConstruct:
Handle SCons version check error when running
on SCons 0.96 and previous.
--HG--
extra : convert_revision : 37595a468a9b56336c3f88a1057706f89bee9157
Undo changes to allow multiple build roots in a single
invocation... this would have been too messy to maintain
with the auto-configure stuff, and probably isn't useful anyway.
--HG--
extra : convert_revision : 32a2d9d7fc980911acc3e7b9430df1ba5a0ee68e
It doesn't compile, and if we really want this we should
start over from scratch and see if we can reuse parts from
BaseSimpleCPU (e.g., derive a FastSimpleCPU).
SConstruct:
src/arch/SConscript:
src/cpu/cpu_models.py:
Get rid of FastCPU model.
--HG--
extra : convert_revision : f3f0362f7292bf21e8e0d4d84c475be8a9789a0c
SConstruct:
Clean up libelf handling. Required better handling of
per-build-root stuff in general (though libelf is the
only thing in that category currently).
src/SConscript:
No libelf-specific stuff in here anymore.
src/base/loader/elf_object.cc:
Just need to include gelf.h... it includes libelf.h.
--HG--
extra : convert_revision : 3d6bdcf8233bda0ac8d08ff777de323df8aa45ae
