The DTB expects the correct PC in the ThreadContext
but how if the memory accesses are speculative? Shouldn't
we send along the requestor's PC to the translate functions?
if a faulting instruction reaches an execution unit,
then ignore it and pass it through the pipeline.
Once we recognize the fault in the graduation unit,
dont allow a second fault to creep in on the same cycle.
Before graduating an instruction, explicitly check fault
by making the fault check it's own separate command
that can be put on an instruction schedule.
this always changes the PC and is basically an impromptu branch instruction. why
not speculate on this instead of always be forced to mispredict/squash after the
hwrei gets resolved?
The InOrder model needs this marked as "isControl" so it knows to update the PC
after the ALU executes it. If this isnt marked as control, then it's going to
force the model to check the PC of every instruction at commit (what O3 does?),
and that would be a wasteful check for a very high percentage of instructions.
remove events in the resource pool that can be called from the CPU event, since the CPU
event is scheduled at the same time at the resource pool event.
----
Also, match the resPool event function names to the cpu event function names
----
only update BTB on a taken branch and update branch predictor w/pcstate from instruction
---
only pay attention to branch predictor updates if the the inst. is in fact a branch
formerly, this was implicit when you accessed the execution unit
or the use-def unit but it's better that this just be something
that a user can specify.
Architectures like SPARC need to read the window pointer
in order to figure out it's register dependence. However,
this may not get updated until after an instruction gets
executed, so now we lazily detect the register dependence
in the EXE stage (execution unit or use_def). This
makes sure we get the mapping after the most current change.
Instead of clearing the entire TLB on initialization and flush, the code was
clearing only one element. This patch corrects the memsets in the init and
flush routines.
The code for Set class was written under the assumption that
std::numeric_limits<long>::digits returns the number of bits used for
data type long, which was presumed to be either 32 or 64. But return value
is actually one less, that is, it is either 31 or 63. The value is now
being incremented by 1 so as to correctly set it.
If there's a problem when reading the section names from a supposed ELF file,
this change makes gem5 print an error message as returned by libelf and die.
Previously these sorts of errors would make gem5 segfault when it tried to
access the section name through a NULL pointer.
this flag is only used for early branch resolution in the O3 model (of pc-relative branches)
but this isnt cleanly working even when the branch target code is added for sparc. For now,
we'll ignore this optimization and add a todo in the SPARC ISA for future developers
Add a few constants and functions that the InOrder model wants for SPARC.
* * *
sparc: add eaComp function
InOrder separates the address generation from the actual access so give
Sparc that functionality
* * *
sparc: add control flags for branches
branch predictors and other cpu model functions need to know specific information
about branches, so add the necessary flags here
The access permissions for the directory entries are not being set correctly.
This is because pointers are not used for handling directory entries.
function. get and set functions for access permissions have been added to the
Controller state machine. The changePermission() function provided by the
AbstractEntry and AbstractCacheEntry classes has been exposed to SLICC
code once again. The set_permission() functionality has been removed.
NOTE: Each protocol will have to define these get and set functions in order
to compile successfully.
The regular expressions matching filenames in the ##include directives and the
internally generated ##newfile directives where only looking for filenames
composed of alpha numeric characters, periods, and dashes. In Unix/Linux, the
rules for what characters can be in a filename are much looser than that. This
change replaces those expressions with ones that look for anything other than
a quote character. Technically quote characters are allowed as well so we
should allow escaping them somehow, but the additional complexity probably
isn't worth it.
Currently, the machine name is appended before any of the functions
defined with in the sm files. This is not necessary and it also
means that these functions cannot be used outside the sm files.
This patch does away with the prefixes. Note that the generated
C++ files in which the code for these functions is present are
still named such that the machine name is the prefix.
The default generated binary is now gem5.<type> instead of m5.<type>.
The latter does still work but gem5.<type> will be generated first and
then m5.<type> will be hard linked to it.
The end of the COPYING file was generated with:
% python ./util/find_copyrights.py configs src system tests util
Update -C command line option to spit out COPYING file
We were getting a spurious warning in the regressions that turned
out to be due to having the wrong value for TGT_MAP_ANONYMOUS for
Power Linux, but in the process of tracking it down I ended up
doing some cleanup of the mmap handling in general.
A significant contributor to the need for adoptOrphanParams()
is the practice of appending to SimObjectVectors which have
already been assigned as children. This practice sidesteps the
assignment operation for those appended SimObjects, which is
where parent/child relationships are typically established.
This patch reworks the config scripts that use append() on
SimObjectVectors, which all happen to be in the x86 system
configuration. At some point in the future, I hope to make
SimObjectVectors immutable (by deriving from tuple rather than
list), at which time this patch will be necessary for correct
operation. For now, it just avoids some of the warning
messages that get printed in adoptOrphanParams().
Re-enabling implicit parenting (see previous patch) causes current
Ruby config scripts to create some strange hierarchies and generate
several warnings. This patch makes three general changes to address
these issues.
1. The order of object creation in the ruby config files makes the L1
caches children of the sequencer rather than the controller; these
config ciles are rewritten to assign the L1 caches to the
controller first.
2. The assignment of the sequencer list to system.ruby.cpu_ruby_ports
causes the sequencers to be children of system.ruby, generating
warnings because they are already parented to their respective
controllers. Changing this attribute to _cpu_ruby_ports fixes this
because the leading underscore means this is now treated as a plain
Python attribute rather than a child assignment. As a result, the
configuration hierarchy changes such that, e.g.,
system.ruby.cpu_ruby_ports0 becomes system.l1_cntrl0.sequencer.
3. In the topology classes, the routers become children of some random
internal link node rather than direct children of the topology.
The topology classes are rewritten to assign the routers to the
topology object first.
Last summer's big rewrite of the initialization code (in
particular cset 6efc3672733b) got rid of the implicit parenting
that used to occur when an unparented SimObject was assigned as
a parameter value to another SimObject. The idea was that the
new adoptOrphanParams() step would catch these anyway so it was
unnecessary.
Unfortunately it turns out that adoptOrphanParams() has some
inherent instability in that the parent that does the adoption
depends on the config tree traversal order. Even making this
order deterministic (e.g., by traversing children in
alphabetical order) can introduce unwanted and unexpected
hierarchy changes between similar configs (e.g., when adding a
switch_cpu in place of a cpu), causing problems when trying to
restore checkpoints across similar configs. The hierarchy
created by implicit parenting is more stable and more
controllable, so this patch turns that behavior back on.
This patch also cleans up some long-standing holes regarding
parenting of SimObjects that are created in class definitions
(either in the body of the class, or as default parameters).
To avoid breaking some existing config files, this necessitated
changing the error on reparenting children to a warning. This
change fixes another bug where attempting to print the prior
error message would fail on reparenting SimObjectVectors
because they lack a _parent attribute. Some further issues
with SimObjectVectors were cleaned up by getting rid of the
get_parent() call (which could cause errors with some
SimObjectVectors where there was no single parent to return)
with has_parent() (since all the uses of get_parent() were just
boolean tests anyway).
Finally, since the adoptOrphanParam() step turned out to be so
problematic, we now issue a warning when it actually has to do
an adoption. Future cleanup of config files will get rid of
current warnings.
Calculation of offset to copy from storeQueue[idx].data structure for load to
store forwarding fixed to be difference in bytes between store and load virtual
addresses. Previous method would induce bug where a load would index into
buffer at the wrong location.
If a split load fails on a blocked cache wbOutstanding can be decremented
twice if the first part of the split load succeeds and the second part fails.
Condition the decrementing on not having completed the first part of the load.
This patch fixes two problems with the O3 cpu model. The first is an issue
with an instruction fetch causing a fault on the next address while the
current macro-op is being issued. This happens when the micro-ops exceed
the fetch bandwdith and then on the next cycle the fetch stage attempts
to issue a request to the next line while it still has micro-ops to issue
if the next line faults a fault is attached to a micro-op in the currently
executing macro-op rather than a "nop" from the next instruction block.
This leads to an instruction incorrectly faulting when on fetch when
it had no reason to fault.
A similar problem occurs with interrupts. When an interrupt occurs the
fetch stage nominally stops issuing instructions immediately. This is incorrect
in the case of a macro-op as the current location might not be interruptable.
The virtual channels within "response" vnets are made buffers_per_data_vc
deep (default=4), while virtual channels within other vnets are made
buffers_per_ctrl_vc deep (default = 1). This is for accurate power estimates.
Identifying response vnets versus other vnets will allow garnet to
determine which vnets will carry data packets, and which will carry
ctrl packets, and use appropriate buffer sizes (since data packets are larger
than ctrl packets). This in turn allows the orion power model to accurately
estimate buffer power.
Renamed (message) class to vnet for consistency with rest of ruby.
Moved some parameters specific to fixed/flexible garnet networks into their
corresponding py files.
This change further eliminates cases where condition codes were being read
just so they could be written without change because the instruction in
question was supposed to preserve them. This is done by creating the condition
code code based on the input rather than just doing a simple substitution.
If one of the condition codes isn't being used in the execution we should only
read it if the instruction might be dependent on it. With the preeceding changes
there are several more cases where we should dynamically pick instead of assuming
as we did before.
Break up the condition code bits into NZ, C, V registers. These are individually
written and this removes some incorrect dependencies between instructions.
Move the saturating bit (which is also saturating) from the renamed register
that holds the flags to the CPSR miscreg and adds a allows setting it in a
similar way to the FP saturating registers. This removes a dependency in
instructions that don't write, but need to preserve the Q bit.
This change splits out the condcodes from being one monolithic register
into three blocks that are updated independently. This allows CPUs
to not have to do RMW operations on the flags registers for instructions
that don't write all flags.
Debug flags are ExecUser, ExecKernel, and ExecAsid. ExecUser and
ExecKernel are set by default when Exec is specified. Use minus
sign with ExecUser or ExecKernel to remove user or kernel tracing
respectively.
Add registers and components to better support the VersatileEB board.
Made the MIDR and SYS_ID register parameters to ArmSystem and RealviewCtrl
respectively.
Instructions that load an address and are control instructions can
execute down the wrong path if they were predicted correctly and then
instructions following them are squashed. If an instruction is a
memory and control op use the predicted address for the next PC instead
of just advancing the PC. Without this change NPC is used for the next
instruction, but predPC is used to verify that the branch was successful
so the wrong path is silently executed.
The network tester terminates after injecting for sim_cycles
(default=1000), instead of having to explicitly pass --maxticks from the
command line as before. If fixed_pkts is enabled, the tester only
injects maxpackets number of packets, else it keeps injecting till sim_cycles.
The tester also works with zero command line arguments now.
The RubyMemory flag wasnt used in the code, creating large gaps in trace output. Replace cprintfs w/dprintfs
using RubyMemory in memory controller. DPRINTF also deprecate the usage of the setDebug() pure virtual
function in the AbstractMemoryOrCache Class as well the m_debug/cprintf functions in MemoryControl.hh/cc
The simple network's endpoint bandwidth value is used to adjust the overall
bandwidth of the network. Specifically, the ration between endpoint bandwidth
and the MESSAGE_SIZE_MULTIPLIER determines the increase. By setting the value
to 1000, that means the bandwdith factor specified in the links translates to
the link bandwidth in bytes. Previously, it was increasing that value by 10.
This patch will likely require a reset of the ruby regression tester stats.
Moved the buffer_size, endpoint_bandwidth, and adaptive_routing params out of
the top-level parent network object and to only those networks that actually
use those parameters.
This patch ensures that both Garnet and the simple networks use the bw value
specified in the topology. To do so, the patch generalizes the specification
of bw for basic links. This value is then translated to the specific value
used by the simple and Garnet networks. Since Garent does not support
non-uniformed link bandwidth, the patch also adds a check to ensure all bws are
equal.
--HG--
rename : src/mem/ruby/network/BasicLink.cc => src/mem/ruby/network/simple/SimpleLink.cc
rename : src/mem/ruby/network/BasicLink.hh => src/mem/ruby/network/simple/SimpleLink.hh
rename : src/mem/ruby/network/BasicLink.py => src/mem/ruby/network/simple/SimpleLink.py
This patch converts links and switches from second class simobjects that were
virtually ignored by the networks (both simple and Garnet) to first class
simobjects that directly correspond to c++ ojbects manipulated by the
topology and network classes. This is especially true for Garnet, where the
links and switches directly correspond to specific C++ objects.
By making this change, many aspects of the Topology class were simplified.
--HG--
rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/BasicLink.cc
rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/BasicLink.hh
rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.cc
rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.hh
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.py
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetRouter_d.py
rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.cc
rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.hh
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.py
rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetRouter.py
Moved the Topology class to the top network directory because it is shared by
both the simple and Garnet networks.
--HG--
rename : src/mem/ruby/network/simple/Topology.cc => src/mem/ruby/network/Topology.cc
rename : src/mem/ruby/network/simple/Topology.hh => src/mem/ruby/network/Topology.hh
Due to certain changes made via changeset 8229, the compilation was failing
in certain cases. The compiler pointed to base/stats/mysql.hh for not naming
a certain types like uint64_t. To rectify this, base/types.hh is being
included in base/stats/mysql.hh.
This change makes the decoder figure out if an instruction that only supports
memory is using a register encoding and decodes directly to "Unknown" which will
behave appropriately. This prevents other parts of the instruction creation
process from seeing the mismatch and asserting.
This is similar to guards on mercurial queues and they're used for selecting
which files are compiled into some given object. We already do something
similar, but it's mostly hard coded for the m5 binary and the m5 library
and I'd like to make it more flexible to better support the unittests
At the same time, rename the trace flags to debug flags since they
have broader usage than simply tracing. This means that
--trace-flags is now --debug-flags and --trace-help is now --debug-help
This is basically like the range_map stuff in src/base (range already
exists in Python). This code is like a set of ranges. I'm using it
to keep track of changed lines in source code, but it could be use to
keep track of memory ranges and holes in memory regions. It could
also be used in memory allocation type stuff. (Though it's not at all
optimized.)
Frame buffer and boot linux:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxFrameBuf --kernel=vmlinux.touchkit
Linux from a CF card:
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.touchkit
Run Android
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmAndroid --kernel=vmlinux.android
Run MP
./build/ARM_FS/m5.opt configs/example/fs.py --benchmark=ArmLinuxCflash --kernel=vmlinux.mp-2.6.38
This change fixes a small bug in the arm copyRegs() code where some registers
wouldn't be copied if the processor was in a mode other than MODE_USER.
Additionally, this change simplifies the way the O3 switchCpu code works by
utilizing TheISA::copyRegs() to copy the required context information
rather than the adhoc copying that goes on in the CPU model. The current code
makes assumptions about the visibility of int and float registers that aren't
true for all architectures in FS mode.
The comment in the code suggests that the checking granularity should be 16
bytes, however in reality the shift by 8 is 256 bytes which seems much
larger than required.
Fixed an error reguarding DMA for uninprocessor systems. Basically removed an
overly agressive optimization that lead to inconsistent state between the
cache and the directory.
This function duplicates the functionality of allocate() exactly, except that it does not return
a return value. In protocols where you just want to allocate a block
but do not want that block to be your implicitly passed cache_entry, use this function.
Otherwise, SLICC will complain if you do not consume the pointer returned by allocate(),
and if you do a dummy assignment Entry foo := cache.allocate(address), the C++
compiler will complain of an unused variable. This is kind of a hack to get around
those issues, but suggestions welcome.
Before this changeset, all local variables of type Entry and TBE were considered
to be pointers, but an immediate use of said variables would not be automatically
deferenced in SLICC-generated code. Instead, deferences occurred when such
variables were passed to functions, and were automatically dereferenced in
the bodies of the functions (e.g. the implicitly passed cache_entry).
This is a more general way to do it, which leaves in place the
assumption that parameters to functions and local variables of type AbstractCacheEntry
and TBE are always pointers, but instead of dereferencing to access member variables
on a contextual basis, the dereferencing automatically occurs on a type basis at the
moment a member is being accessed. So, now, things you can do that you couldn't before
include:
Entry foo := getCacheEntry(address);
cache_entry.DataBlk := foo.DataBlk;
or
cache_entry.DataBlk := getCacheEntry(address).DataBlk;
or even
cache_entry.DataBlk := static_cast(Entry, pointer, cache.lookup(address)).DataBlk;
This is a substitute for MessageBuffers between controllers where you don't
want messages to actually go through the Network, because requests/responses can
always get reordered wrt to one another (even if you turn off Randomization and turn on Ordered)
because you are, after all, going through a network with contention. For systems where you model
multiple controllers that are very tightly coupled and do not actually go through a network,
it is a pain to have to write a coherence protocol to account for mixed up request/response orderings
despite the fact that it's completely unrealistic. This is *not* meant as a substitute for real
MessageBuffers when messages do in fact go over a network.
It is useful for Ruby to understand from whence request packets came.
This has all request packets going into Ruby pass the contextId value, if
it exists. This supplants the old libruby proc_id value passed around in
all the Messages, so I've also removed the unused unsigned proc_id; member
generated by SLICC for all Message types.
***
(1): get rid of expandForMT function
MIPS is the only ISA that cares about having a piece of ISA state integrate
multiple threads so add constants for MIPS and relieve the other ISAs from having
to define this. Also, InOrder was the only core that was actively calling
this function
* * *
(2): get rid of corespecific type
The CoreSpecific type was used as a proxy to pass in HW specific params to
a MIPS CPU, but since MIPS FS hasnt been touched for awhile, it makes sense
to not force every other ISA to use CoreSpecific as well use a special
reset function to set it. That probably should go in a PowerOn reset fault
anyway.
