Commit graph

4966 commits

Author SHA1 Message Date
Daniel Johnson
52d30813ca Mem: Allow ASID to be set after request is created. 2011-09-13 12:06:13 -05:00
Chander Sudanthi
7c479d7349 CP15 c15: enable execution with accesses to c15 registers
Previously, coprocessor accesses to CP15 c15 would fault.  This patch
enables accesses but prints out a warning, as the registers are not implemented.
2011-09-13 12:06:13 -05:00
Daniel Johnson
09a6e424ec ARM: Implement numcpus bits in L2CTLR register. 2011-09-13 12:06:13 -05:00
Ali Saidi
0c29a97ba9 Prefetch: Don't prefetch if address is in the write queue.
Check that we're not currently writing back an address the prefetcher is trying
to prefetch before issuing it. We previously checked the mshrQueue and the cache
itself, but forgot to check the writeBuffer. This fixes a memory corrucption
issue with an L2 prefetcher.
2011-09-13 12:06:13 -05:00
Ali Saidi
649c239cee LSQ: Only trigger a memory violation with a load/load if the value changes.
Only create a memory ordering violation when the value could have changed
between two subsequent loads, instead of just when loads go out-of-order
to the same address. While not very common in the case of Alpha, with
an architecture with a hardware table walker this can happen reasonably
frequently beacuse a translation will miss and start a table walk and
before the CPU re-schedules the faulting instruction another one will
pass it to the same address (or cache block depending on the dendency
checking).

This patch has been tested with a couple of self-checking hand crafted
programs to stress ordering between two cores.

The performance improvement on SPEC benchmarks can be substantial (2-10%).
2011-09-13 12:58:08 -04:00
Deyuan Guo
bb921b1459 MIPS: Implement gem5/src/arch/mips/remote_gdb.cc.
So a mips-cross-gdb can connect with gem5(MIPS_SE), and do some remote
debugging.

Testing:

Build gem5 for MIPS_SE and make gem5 wait at beginning:
modify "rgdb_wait = -1" to "rgdb_wait = 0" in src/sim/system.cc;
scons build/MIPS_SE/gem5.opt CPU_MODELS=O3CPU
----
Build GDB-7.3 mips-cross:
./configure --target=mips-linux-gnu --prefix=xxx/gdb-7.3-install/
make
make install
----
Run:
./build/MIPS_SE/gem5.opt configs/example/se.py --detailed --caches
./mips-linux-gnu-gdb xxx/gem5/tests/test-progs/hello/bin/mips/linux/hello
(gdb) target remote :7000
(gdb) info registers
(gdb) disassemble
(gdb) si
(gdb) break main
(gdb) c
(gdb) quit
Testing done.
2011-09-10 03:45:25 -07:00
Gabe Black
6a2b223112 PseudoInst: Add compiler guards to pseudo_inst.hh. 2011-09-10 02:31:15 -07:00
Gabe Black
49a7ed0397 StaticInst: Merge StaticInst and StaticInstBase.
Having two StaticInst classes, one nominally ISA dependent and the other ISA
dependent, has not been historically useful and makes the StaticInst class
more complicated that it needs to be. This change merges StaticInstBase into
StaticInst.
2011-09-09 02:40:11 -07:00
Gabe Black
b7b545bc38 Decode: Pull instruction decoding out of the StaticInst class into its own.
This change pulls the instruction decoding machinery (including caches) out of
the StaticInst class and puts it into its own class. This has a few intrinsic
benefits. First, the StaticInst code, which has gotten to be quite large, gets
simpler. Second, the code that handles decode caching is now separated out
into its own component and can be looked at in isolation, making it easier to
understand. I took the opportunity to restructure the code a bit which will
hopefully also help.

Beyond that, this change also lays some ground work for each ISA to have its
own, potentially stateful decode object. We'd be able to include less
contextualizing information in the ExtMachInst objects since that context
would be applied at the decoder. Also, the decoder could "know" ahead of time
that all the instructions it's going to see are going to be, for instance, 64
bit mode, and it will have one less thing to check when it decodes them.
Because the decode caching mechanism has been separated out, it's now possible
to have multiple caches which correspond to different types of decoding
context. Having one cache for each element of the cross product of different
configurations may become prohibitive, so it may be desirable to clear out the
cache when relatively static state changes and not to have one for each
setting.

Because the decode function is no longer universally accessible as a static
member of the StaticInst class, a new function was added to the ThreadContexts
that returns the applicable decode object.
2011-09-09 02:30:01 -07:00
Gabe Black
a1ad9e652a Stack: Tidy up some comments, a warning, and make stack extension consistent.
Do some minor cleanup of some recently added comments, a warning, and change
other instances of stack extension to be like what's now being done for x86.
2011-09-09 01:01:43 -07:00
Gabe Black
f370ac5c18 ISA parser: Don't look for operands in strings. 2011-09-08 03:21:14 -07:00
Gabe Black
f4dc64655f ISA parser: Match /* */ and // style comments.
Comments should not be scanned for operands, and we should look for both /* */
style and // style.
2011-09-08 03:20:05 -07:00
Gabe Black
87d687e242 X86: Make sure instruction flags are set properly even on 32 bit machines.
The way flag bits were being set for microops in x86 ended up implicitly
calling the bitset constructor which was truncating flags beyond the width of
an unsigned long. This change sets the bits in chunks which are always small
enough to avoid being truncated. On 64 bit machines this should reduce to be
the same as before, and on 32 bit machines it should work properly and not be
unreasonably inefficient.
2011-09-05 18:36:26 -07:00
Gabe Black
3bd0b9654c X86,TLB: Make sure the "delayedResponse" variable is always set.
When an instruction is translated in the x86 TLB, a variable called
delayedResponse is passed back and forth which tracks whether a translation
could be completed immediately, or if there's going to be callback that will
finish things up. If a read was to the internal memory space, memory mapped
registers used to implement things like MSRs, the function hadn't yet gotten
to where delayedResponse was set to false, it's default. That meant that the
value was never set, and the TLB could start waiting for a callback that would
never come. This change simply moves the assignment to above where control
can divert to translateInt().
2011-09-05 02:48:57 -07:00
Lisa Hsu
365966304e TLB: comments and a helpful warning.
Nothing big here, but when you have an address that is not in the page table request to be allocated, if it falls outside of the maximum stack range all you get is a page fault and you don't know why.  Add a little warn() to explain it a bit.  Also add some comments and alter logic a little so that you don't totally ignore the return value of checkAndAllocNextPage().
2011-09-02 17:04:00 -07:00
Lisa Hsu
f6a2ef22ff Fix build for gcc-4.2 opt/fast
Even though the code is safe, compiler flags a warning here, which are treated as errors for fast/opt. I know it's redundant but it has no side effects and fixes the compile.
2011-09-01 15:25:54 -07:00
Lisa Hsu
ae12ae3023 Functional Accesses: Update states to support Broadcast/Snooping protocols.
In the current implementation of Functional Accesses, it's very hard to
implement broadcast or snooping protocols where the memory has no idea if it
has exclusive access to a cache block or not. Without this knowledge, making
sure the RW vs. RO permissions are right are next to impossible. So we add a
new state called Backing_Store to enable the conveyance that this is the backup
storage for a block, so that it can be written if it is the only possibly RW
block in the system, or written even if there is another RW block in the
system, without causing problems.

Also, a small change to actually set the m_name field for each Controller so
that debugging can be easier. Now you can access a controller's name just by
controller->getName().
2011-09-01 11:41:44 -07:00
Nilay Vaish
ebda5c14a5 SLICC: Pass arguments by reference
Arguments to functions were being passed by value. This patch
changes SLICC so that arguments are passed by reference.
2011-08-29 06:34:40 -05:00
Nilay Vaish
1bbca50491 Ruby: Remove some unused code 2011-08-29 05:10:23 -05:00
Nilay Vaish
a08cc94936 Ruby: Eliminate modulo op for computing set size. 2011-08-26 12:27:58 -05:00
Ali Saidi
c9d5985b82 ARM: Mark some variables uncacheable until boot all CPUs are enabled.
There are a set of locations is the linux kernel that are managed via
cache maintence instructions until all processors enable their MMUs & TLBs.
Writes to these locations are manually flushed from the cache to main
memory when the occur so that cores operating without their MMU enabled
and only issuing uncached accesses can receive the correct data. Unfortuantely,
gem5 doesn't support any kind of software directed maintence of the cache.
Until such time as that support exists this patch marks the specific cache blocks
that need to be coherent as non-cacheable until all CPUs enable their MMU and
thus allows gem5 to boot MP systems with caches enabled (a requirement for
booting an O3 cpu and thus an O3 CPU regression).
2011-08-19 15:08:08 -05:00
Ali Saidi
c9c2d979b8 Mem: Put prefetcher notify call before packet is deleted. 2011-08-19 15:08:08 -05:00
Ali Saidi
2fd2b44b86 ARM: Add VExpress_E support with PCIe to gem5 2011-08-19 15:08:08 -05:00
Ali Saidi
d2a0a2ec22 ARM: Add support for Versatile Express boards 2011-08-19 15:08:08 -05:00
Ali Saidi
23755eb434 ARM: Make GIC function that should only be called by GIC protected. 2011-08-19 15:08:08 -05:00
Ali Saidi
243223ae63 IDE: Fix issues with new PIIX kernel driver and our model.
The driver can read the IDE config register as a 32 bit register since
some adapters use bit 18 as a disable channel bit. If the size isn't
set in a PRD it should be 64K according to the SPEC (and driver) not
128K.
2011-08-19 15:08:08 -05:00
Ali Saidi
b94f841969 ARM: Add support for DIV/SDIV instructions. 2011-08-19 15:08:07 -05:00
Ali Saidi
b6203360ef LSQ: Set store predictor to periodically clear itself as recommended in the storesets paper.
This patch improves performance by as much as 10% on some spec benchmarks.
2011-08-19 15:08:07 -05:00
Geoffrey Blake
5f425b8bd1 Fix bugs due to interaction between SEV instructions and O3 pipeline
SEV instructions were originally implemented to cause asynchronous squashes
via the generateTCSquash() function in the O3 pipeline when updating the
SEV_MAILBOX miscReg. This caused race conditions between CPUs in an MP system
that would lead to a pipeline either going inactive indefinitely or not being
able to commit squashed instructions. Fixed SEV instructions to behave like
interrupts and cause synchronous sqaushes inside the pipeline, eliminating
the race conditions. Also fixed up the semantics of the WFE instruction to
behave as documented in the ARMv7 ISA description to not sleep if SEV_MAILBOX=1
or unmasked interrupts are pending.
2011-08-19 15:08:07 -05:00
Mrinmoy Ghosh
d0e0485902 LSQ: Add some better dprintfs for storeset predictor. 2011-08-19 15:08:05 -05:00
Mrinmoy Ghosh
0db95030fc LSQ: Fix a few issues with the storeset predictor.
Two issues are fixed in this patch:
1. The load and store pc passed to the predictor are passed in reverse order.
2. The flag indicating that a barrier is inflight was never cleared when
   the barrier was squashed instead of committed. This made all load insts
   dependent on a non-existent barrier in-flight.
2011-08-19 15:08:05 -05:00
Thomas Grass
3f1ae35c6d Stats: Add a sparse histogram stat object. 2011-08-19 15:08:05 -05:00
Giacomo Gabrielli
676a530b77 O3: Squash the violator and younger instructions instead not all insts.
Change the way instructions are squashed on memory ordering violations
to squash the violator and younger instructions, not all instructions
that are younger than the instruction they violated (no reason to throw
away valid work).
2011-08-19 15:08:05 -05:00
Geoffrey Blake
f778c46b5e ARM: Add per-cpu local timers for ARM.
Cortex-A9 processors can have a local timer and watchdog counter. It
is enabled by default in Linux and up to this point we've had to disable
them since a model wasn't available. This change allows a default
MP ARM Linux configuration to boot.
2011-08-19 15:08:05 -05:00
Prakash Ramrakhani
efd91d2237 ARM: Add per-processor interrupt support to GIC. 2011-08-19 15:08:05 -05:00
Ali Saidi
9b356adf54 ARM: Fix a memory leak with the table walker. 2011-08-19 15:08:05 -05:00
Ali Saidi
6779bd3e5d Prefetcher: Fix some memory leaks with the prefetcher. 2011-08-19 15:08:05 -05:00
Ali Saidi
b3a058f220 ARM: quiet what can be a very noise CLCD controller. 2011-08-19 15:08:05 -05:00
Gabe Black
f2c89a01d1 InOrder: Make cache_unit.hh include hashmap.hh explicitly, not transitively. 2011-08-16 02:47:15 -07:00
Gabe Black
78a4636a13 O3: Make lsq_unit.hh include arch/isa_traits.hh directly, not transitively. 2011-08-16 02:46:57 -07:00
Nilay Vaish
769c1844f0 Ruby: Initialize some variables. 2011-08-15 12:56:47 -05:00
Gabe Black
0e6dc00497 O3: When squashing, restore the macroop that should be used for fetching. 2011-08-14 17:41:34 -07:00
Gabe Black
ec204f003c O3: Add a pointer to the macroop for a microop in the dyninst. 2011-08-14 04:08:14 -07:00
Gabe Black
1b9de61a71 X86: Use IsSquashAfter if an instruction could affect fetch translation.
Control register operands are set up so that writing to them is serialize
after, serialize before, and non-speculative. These are probably overboard,
but they should usually be safe. Unfortunately there are times when even these
aren't enough. If an instruction modifies state that affects fetch, later
serialized instructions which come after it might have already gone through
fetch and decode by the time it commits. These instructions may have been
translated incorrectly or interpretted incorrectly and need to be destroyed.
This change modifies instructions which will or may have this behavior so that
they use the IsSquashAfter flag when necessary.
2011-08-13 23:03:11 -07:00
Gabe Black
e0043f8dbe O3: At the end of an instruction, force fetchAddr to something sensible.
It's possible (though until now very unlikely) for fetchAddr to get out of
sync with the actual PC of the current instruction. This change forcefull
resets fetchAddr at the end of every instruction.
2011-08-13 13:36:37 -07:00
Gabe Black
96df6bedb7 O3: Stop using the current macroop no matter why you're leaving it.
Until now, the only reason a macroop would be left was because it ended at a
microop marked as the last microop. In O3 with branch prediction, it's
possible for the branch predictor to have entries which originally came from
different instructions which happened to have the same RIP. This could
theoretically happen in many ways, but it was encountered specifically when
different programs in different address spaces ran one after the other in
X86_FS.

What would happen in that case was that the macroop would continue to be
looped over and microops fetched from it until it reached the last microop
even though the macropc had moved out from under it. If things lined up
properly, this could mean that the end bytes of an instruction actually fell
into the instruction sized block of memory after the one in the predecoder.
The fetch loop implicitly assumes that the last instruction sized chunk of
memory processed was the last one needed for the instruction it just finished
executing. It would then tell the predecoder to move to an offset within the
bytes it was given that is larger than those bytes, and that would trip an
assert in the x86 predecoder.

This change fixes this problem by making fetch stop processing the current
macroop if the address it should be fetching from changed when the PC is
updated. That happens when the last microop was reached because the instruction
handled it properly, and it also catches the case where the branch predictor
makes fetch do a macro level branch when it shouldn't.

The check of isLastMicroop is retained because otherwise, a macroop that
branches back to itself would act like a single, long macroop instead of
multiple instances of the same microop. There may be situations (which may
turn out to be purely hypothetical) where that matters.

This also fixes a relatively minor issue where the curMacroop variable would
be set to NULL immediately after seeing that a microop was the last one before
curMacroop was used to build the dyninst. The traceData structure would have a
NULL pointer to the macroop for that microop.
2011-08-09 11:30:43 -07:00
Gabe Black
3989f41261 O3: When waiting to handle an interrupt, let everything drain out.
Before this change, the commit stage would wait until the ROB and store queue
were empty before recognizing an interrupt. The fetch stage would stop
generating instructions at an appropriate point, so commit would then wait
until a valid time to interrupt the instruction stream. Instructions might be
in flight after fetch but not the in the ROB or store queue (in rename, for
instance), so this change makes commit wait until all in flight instructions
are finished.
2011-08-09 03:37:43 -07:00
Nilay Vaish
821dfc1289 BuildEnv: Eliminate RUBY as build environment variable
This patch replaces RUBY with PROTOCOL in all the SConscript files as
the environment variable that decides whether or not certain components
of the simulator are compiled.
2011-08-08 10:50:13 -05:00
Gabe Black
5c0e6e6092 O3: Get rid of the unused addToRemoveList function. 2011-08-07 15:41:10 -07:00
Gabe Black
a9b7931156 O3: Let squashed and deferred instructions issue.
Let squahsed and deferred instructions issue so they don't accumulate and clog
up the CPU.
2011-08-07 15:41:07 -07:00
Ali Saidi
4d83b8a799 O3: Fix uninitialized variable in the tournament branch predictor. 2011-08-07 09:21:49 -07:00
Gabe Black
16882b0483 Translation: Use a pointer type as the template argument.
This allows regular pointers and reference counted pointers without having to
use any shim structures or other tricks.
2011-08-07 09:21:48 -07:00
Nilay Vaish
720c0be620 Ruby: Remove files and includes not in use 2011-08-03 18:25:30 -05:00
Gabe Black
6230668f5e O3: Get rid of the raw ExtMachInst constructor on DynInsts.
This constructor assumes that the ExtMachInst can be decoded directly into a
StaticInst that's useful to execute. With the advent of microcoded
instructions that's no longer true.
2011-08-02 11:51:16 -07:00
Gabe Black
1c68c32cc9 Scons: Make some Action objects fit the abreviated output format. 2011-08-02 03:22:11 -07:00
Nilay Vaish
1b49c56679 Scons: Drop RUBY as compile time option.
This patch drops RUBY as a compile time option. Instead the PROTOCOL option
is used to figure out whether or not to build Ruby. If the specified protocol
is 'None', then Ruby is not compiled.
2011-08-02 00:10:08 -05:00
Gabe Black
206c2e9a0e O3: Implement memory mapped IPRs for O3. 2011-07-31 19:21:17 -07:00
Gabe Black
a42c6ae48d O3: Fix corner case squashing into the microcode ROM.
When fetching from the microcode ROM, if the PC is set so that it isn't in the
cache block that's been fetched the CPU will get stuck. The fetch stage
notices that it's in the ROM so it doesn't try to fetch from the current PC.
It then later notices that it's outside of the current cache block so it skips
generating instructions expecting to continue once the right bytes have been
fetched. This change lets the fetch stage attempt to generate instructions,
and only checks if the bytes it's going to use are valid if it's really going
to use them.
2011-07-30 23:22:53 -07:00
Nilay Vaish
b4152e250d SLICC: Put functions of a controller in its .cc file
Currently, functions associated with a controller go into separate files.
This patch puts all the functions in the controller's .cc file. This should
hopefully take away some time from compilation.
2011-07-27 20:20:53 -05:00
Ali Saidi
147095cb08 Mem: Fix issue with prefetches originating at non-L1 caches getting stale data
Prefetch requests issued from the L2 or below wouldn't check if valid data is
present higher in the system. If a prefetch into the L2 occured at the same
time as writeback from a higher-level cache the dirty data could be replaced
in by unmodified data in memory.
2011-07-15 11:53:35 -05:00
Giacomo Gabrielli
69ef57fd0f O3: Create a pipeline activity viewer for the O3 CPU model.
Implemented a pipeline activity viewer as a python script (util/o3-pipeview.py)
and modified O3 code base to support an extra trace flag (O3PipeView) for
generating traces to be used as inputs by the tool.
2011-07-15 11:53:35 -05:00
Wade Walker
8870a5820a ARM: Fix SWP/SWPB undefined instruction behavior
SWP and SWPB now throw an undefined instruction exception if
SCTLR.SW == 0. This also required the MIDR to be changed
slightly so programs can correctly determine that gem5 supports
the ARM v7 behavior of SWP/SWPB (in ARM v6, SWP/SWPB were
deprecated, but not disabled at CPU startup).
2011-07-15 11:53:34 -05:00
Wade Walker
e6672d1f29 ARM: Add two unimplemented miscellaneous registers.
Adds MISCREG_ID_MMFR2 and removes break on access to MISCREG_CLIDR. Both
registers now return values that are consistent with current ARM
implementations.
2011-07-15 11:53:34 -05:00
Nilay Vaish
dbde1502cd X86: implements copyRegs() function
This patch implements the copyRegs() function for the x86 architecture.
The patch assumes that no side effects other than TLB invalidation need
to be considered while copying the registers. This may not hold true in
future.
2011-07-11 16:52:52 -05:00
Gabe Black
a7dcd19fa0 ISA: Get rid of the unused mem_acc_type template parameter. 2011-07-11 04:47:06 -07:00
Mrinmoy Ghosh
3396fd9e84 Branch predictor: Fixes the tournament branch predictor.
Branch predictor could not predict a branch in a nested loop because:
 1. The global history was not updated after a mispredict squash.
 2. The global history was updated in the fetch stage. The choice predictors
    that were updated  used the changed global history. This is incorrect, as
    it incorporates the state of global history after the branch in
    encountered. Fixed update to choice predictor using the global history
    state before the branch happened.
 3. The global predictor table was also updated using the global history state
    before the branch happened as above.

Additionally, parameters to initialize ctr and history size were reversed.
2011-07-10 12:56:08 -05:00
Geoffrey Blake
c7e7b89058 O3: Fix up pipelining icache accesses in fetch stage to function properly
Fixed up the patch from Yasuko Watanabe that enabled pipelining of fetch accessess to
icache to work with recent changes to main repository.
Also added in ability for fetch stage to delay issuing the fault carrying
nop when a pipeline fetch causes a fault and no fetch bandwidth is available
until the next cycle.
2011-07-10 12:56:08 -05:00
Ali Saidi
f8538f7456 IO: Handle case where ISA Fake device is being used as a fake memory. 2011-07-10 12:56:08 -05:00
Ali Saidi
60579e8d74 O3: Make sure fetch doesn't go off into the weeds during speculation. 2011-07-10 12:56:08 -05:00
Ali Saidi
9751a1d3e7 Config: Add support for a Self.all proxy object 2011-07-10 12:56:08 -05:00
Daniel Johnson
83f91db2cc ARM: Fix mp interrupt bug in GIC.
Missing "!" made multiprocessor interrupts operate incorrectly.
2011-07-10 12:56:08 -05:00
Korey Sewell
678376f0ba alpha:hwrei:rollback for o3
change hwrei back to being a non-control instruction so O3-FS mode will work
add squash in inorder that will catch a hwrei (or any other genric instruction)
that isnt a control inst but changes the PC. Additional testing still needs to be done
for inorder-FS mode but this change will free O3 development back up in the interim
2011-07-07 21:32:49 -04:00
Brad Beckmann
255f82a783 ruby: added generic dma machine 2011-07-06 18:45:15 -07:00
Brad Beckmann
4f83390781 MOESI_hammer: Fixed uniprocessor DMA bug 2011-07-06 18:44:42 -07:00
Nathan Binkert
da1eaaca0e slicc: add a protocol statement and an include statement
All protocols must specify their name
The include statement allows any file to include another file.
2011-07-05 18:30:05 -07:00
Nathan Binkert
831e9b3b7a slicc: cleanup slicc code and make it less verbose 2011-07-05 18:30:05 -07:00
Nathan Binkert
3d252f8e5f grammar: better encapsulation of a grammar and parsing
This makes it possible to use the grammar multiple times and use the multiple
instances concurrently.  This makes implementing an include statement as part
of a grammar possible.
2011-07-05 18:30:04 -07:00
Gabe Black
87b657278d ISAs: Streamline some spots where Mem is used in the ISA descriptions. 2011-07-05 16:52:57 -07:00
Gabe Black
63a934d152 ISA parser: Define operand types with a ctype directly. 2011-07-05 16:52:15 -07:00
Gabe Black
f16179eb21 ISA parser: Simplify operand type handling.
This change simplifies the code surrounding operand type handling and makes it
depend only on the ctype that goes with each operand type. Future changes will
allow defining operand types by their ctypes directly, convert the ISAs over
to that style of definition, and then remove support for the old style. These
changes are to make it easier to use non-builtin types like classes or
structures as the type for operands.
2011-07-05 16:48:18 -07:00
Nilay Vaish
9b85b4b19a Merged with Gabe's recent changes. 2011-07-03 11:38:25 -05:00
Nilay Vaish
5e0851d554 Network_test: Conform it with functional access changes in Ruby
Addition of functional access support to Ruby necessitated some changes to
the way coherence protocols are written. I had forgotten to update the
Network_test protocol. This patch makes those updates.
2011-07-03 11:33:46 -05:00
Gabe Black
3a1428365a ExecContext: Rename the readBytes/writeBytes functions to readMem and writeMem.
readBytes and writeBytes had the word "bytes" in their names because they
accessed blobs of bytes. This distinguished them from the read and write
functions which handled higher level data types. Because those functions don't
exist any more, this change renames readBytes and writeBytes to more general
names, readMem and writeMem, which reflect the fact that they are how you read
and write memory. This also makes their names more consistent with the
register reading/writing functions, although those are still read and set for
some reason.
2011-07-02 22:35:04 -07:00
Gabe Black
2e7426664a ExecContext: Get rid of the now unused read/write templated functions. 2011-07-02 22:34:58 -07:00
Gabe Black
aade13769f ISA: Use readBytes/writeBytes for all instruction level memory operations. 2011-07-02 22:34:29 -07:00
Gabe Black
2f72d6a1f4 X86: Fix store microops so they don't drop faults in timing mode.
If a fault was returned by the CPU when a store initiated it's write, the
store instruction would ignore the fault. This change fixes that.
2011-07-02 22:31:22 -07:00
Nilay Vaish
45b411fc5f Ruby: Commit files missing from previous commit
The previous commit on functional access support in Ruby did not have
some of the files required. This patch adds those files to the repository.
2011-07-01 16:29:33 -05:00
Brad Beckmann ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
c86f849d5a Ruby: Add support for functional accesses
This patch rpovides functional access support in Ruby. Currently only
the M5Port of RubyPort supports functional accesses. The support for
functional through the PioPort will be added as a separate patch.
2011-06-30 19:49:26 -05:00
Nilay Vaish
f4cfd65d29 arch: print next upc correctly
The patch corrects the print statement which prints the current and
the next pc. Instead of the next upc, the next pc was being printed.
2011-06-28 18:27:38 -05:00
Joel Hestness
d50aec8d9a Ruby: remove unused functions in CacheMemory: get/setMemoryValue 2011-06-24 15:47:35 -05:00
Deyaun Guo
5aaddc129e mips: fix nmsub and nmadd definitions
the -/+ signs were flipped for nmsub_s, nmsub_d, and nmadd_d
2011-06-22 23:35:21 -04:00
Gabe Black
efb9f7c2ae X86: Eliminate an unused argument for building store microops. 2011-06-21 19:28:14 -07:00
Gabe Black
affad29932 InOder: Fix a compile error. 2011-06-20 02:29:14 -07:00
Korey Sewell
477e7039b3 inorder: clear reg. dep entry after removing from list
this will safeguard future code from trying to remove
from the list twice. That code wouldnt break but would
waste time.
2011-06-19 21:43:42 -04:00
Korey Sewell
b963b339b9 inorder: se: squash after syscalls 2011-06-19 21:43:42 -04:00
Korey Sewell
eedd04e894 inorder: cleanup dprintfs in cache unit 2011-06-19 21:43:42 -04:00
Korey Sewell
078f914e69 inorder: SE mode TLB faults
handle them like we do in FS mode, by blocking the TLB until the fault
is handled by the fault->invoke()
2011-06-19 21:43:42 -04:00
Korey Sewell
3cb23bd3a2 inorder:tracing: fix fault tracing bug 2011-06-19 21:43:42 -04:00
Korey Sewell
fe3a2aa4a3 inorder: se compile fixes 2011-06-19 21:43:42 -04:00
Korey Sewell
e572c01120 inorder: add necessary debug flag header files 2011-06-19 21:43:41 -04:00