src/cpu/o3/alpha/cpu.hh:
Got rid of some typedefs, and moved the tlbs to the base o3 cpu.
src/cpu/o3/alpha/thread_context.hh:
src/cpu/o3/cpu.cc:
Moved the tlbs to the base o3 cpu.
--HG--
extra : convert_revision : 1805613aa230b8974a226ee3d2584c85f7a578aa
into zower.eecs.umich.edu:/eecshome/m5/newmem
src/cpu/o3/commit_impl.hh:
Hand Merge
--HG--
extra : convert_revision : 6984db90d5b5ec71c31f1c345f5a77eed540059e
src/cpu/o3/thread_context_impl.hh:
Use flattened indices
src/cpu/simple_thread.hh:
Use flattened indices, and pass a thread context to setSyscallReturn rather than a register file.
src/cpu/thread_context.hh:
The SyscallReturn class is no longer in arch/syscallreturn.hh
--HG--
extra : convert_revision : ed84bb8ac5ef0774526ecd0d7270b0c60cd3708e
Protect other pieces of code so that sparc compiles SE again
src/arch/sparc/SConscript:
Add ua2005.cc back into SConscript
src/arch/sparc/miscregfile.hh:
add functions that deal with priv registers so we don't have to have a bunch of if defs and other ugliness
src/arch/sparc/mmaped_ipr.hh:
wrap handleIpr* with if full_system so it compiles under se
src/arch/sparc/ua2005.cc:
reorganize edit fs only miscreg functions
src/cpu/exetrace.cc:
protect legion code so it doesn't try to compile under se
--HG--
extra : convert_revision : 6b3c9f6f95b4da8544525f4f82e92861383ede76
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
into zower.eecs.umich.edu:/eecshome/m5/newmemmid
src/arch/sparc/isa_traits.hh:
src/arch/sparc/miscregfile.hh:
hand merge
--HG--
extra : convert_revision : 34f50dc5e6e22096cb2c08b5888f2b0fcd418f3e
src/arch/SConscript:
add mmaped_ipr.hh to switch headers
src/arch/sparc/asi.hh:
make ASI_IMPLICT=0 so by default nothing needs to be done
src/arch/sparc/miscregfile.hh:
miscregfile no longer needs to include asi.hh
src/arch/sparc/tlb.cc:
src/arch/sparc/tlb.hh:
implement panic instructions for mmaped ipr reads
src/cpu/simple/atomic.cc:
add check for mmaped iprs and handle them if it exists
src/mem/request.hh:
allocate space in the flags for mmaped iprs. Put in in the first 8 bits so that by default its fast. Move the other flags up 8 bits
--HG--
extra : convert_revision : 31255b0494588c4d06a727fe35241121d741b115
Right now this introduces a minor memory leak as old physPorts and virtPorts are not deleted when new ones are created. A flyspray task has been created for this issue. It can not be resolved until we determine how the bus will handle giving out ID's to functional ports that may be deleted.
src/cpu/o3/cpu.cc:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Change the setup of the physPort and virtPort to instead happen every time the CPU has a context activated. This is a little high overhead, but keeps it working correctly when the CPU does not have a physical memory attached to it until it switches in (like the case of switch CPUs).
src/cpu/o3/thread_context.hh:
Change function from being called at init() to just being called whenever the memory ports need to be connected.
src/cpu/o3/thread_context_impl.hh:
Update this to not delete the port if it's the same as the virtPort.
src/cpu/thread_context.hh:
Change function from being called at init() to whenever the memory ports need to be connected.
src/cpu/thread_state.cc:
Instead of initializing the ports, simply connect them, deleting any old ports that might exist. This allows these functions to be called multiple times.
src/cpu/thread_state.hh:
Ports are no longer initialized, but rather connected at context activation time.
--HG--
extra : convert_revision : e399ce5dfbd6ad658c953a7c9c7b69b89a70219e
src/arch/sparc/process.cc:
MachineBytes doesn't exist any more.
src/arch/sparc/regfile.cc:
Add in the miscRegFile for good measure.
src/cpu/o3/isa_specific.hh:
Add in a section for SPARC
src/cpu/o3/sparc/cpu.cc:
src/cpu/o3/sparc/cpu.hh:
src/cpu/o3/sparc/cpu_builder.cc:
src/cpu/o3/sparc/cpu_impl.hh:
src/cpu/o3/sparc/dyn_inst.cc:
src/cpu/o3/sparc/dyn_inst.hh:
src/cpu/o3/sparc/dyn_inst_impl.hh:
src/cpu/o3/sparc/impl.hh:
src/cpu/o3/sparc/params.hh:
src/cpu/o3/sparc/thread_context.cc:
src/cpu/o3/sparc/thread_context.hh:
Sparc version of this file.
--HG--
extra : convert_revision : 34bb5218f802d0a1328132a518cdd769fb59b6a4
src/cpu/o3/alpha/cpu_impl.hh:
Handle the PhysicalPort and VirtualPort in the ThreadState.
src/cpu/o3/cpu.cc:
Initialize the thread context.
src/cpu/o3/thread_context.hh:
Add new function to initialize thread context.
src/cpu/o3/thread_context_impl.hh:
Use code now put into function.
src/cpu/simple_thread.cc:
Move code to ThreadState and use the new helper function.
src/cpu/simple_thread.hh:
Remove init() in this derived class; use init() from ThreadState base class.
src/cpu/thread_state.cc:
Move setting up of Physical and Virtual ports here. Change getMemFuncPort() to connectToMemFunc(), which connects a port to a functional port of the memory object below the CPU.
src/cpu/thread_state.hh:
Update functions.
--HG--
extra : convert_revision : ff254715ef0b259dc80d08f13543b63e4024ca8d
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
src/cpu/simple/timing.cc:
Various updates for deleting requests more properly.
The major change is moving the deletion of the fetch request/packet to after the instruction has executed and completed. This should fix a few bugs because Ron's memory system didn't expect a call for a functional access while a timing access was being processed.
--HG--
extra : convert_revision : c7cf114bb1ff3cdaa7b0a40ed4c5302dc9d3a522
src/cpu/o3/fetch_impl.hh:
Fetch needs to make sure it isn't waiting on an Icache access.
--HG--
extra : convert_revision : b53eb58b9e5a00bdb394134586d1f84f84d1c6e1
src/arch/alpha/interrupts.hh:
No need for this now that the ThreadContext is being used to set these IPRs in interrupts.
Also split up the interrupt checking from the updating of the IPL and interrupt summary.
src/arch/alpha/tlb.cc:
Check the PC for whether or not it's in PAL mode, not the addr.
src/cpu/o3/alpha/cpu.hh:
Split up getting the interrupt from actually processing the interrupt.
src/cpu/o3/alpha/cpu_impl.hh:
Splut up the processing of interrupts.
src/cpu/o3/commit_impl.hh:
Update for ISA-oriented interrupt changes.
src/cpu/o3/fetch_impl.hh:
Fix broken if statement from PcPAL updates, and properly populate the request fields.
Also more debugging output.
src/cpu/ozone/cpu_impl.hh:
Updates for ISA-oriented interrupt stuff.
src/cpu/ozone/front_end_impl.hh:
Populate request fields properly.
src/cpu/simple/base.cc:
Update for interrupt stuff.
--HG--
extra : convert_revision : 9bac3f9ffed4948ee788699b2fa8419bc1ca647c
src/arch/alpha/faults.hh:
Only use pagetable.hh in FS
src/arch/alpha/pagetable.hh:
pagetable.hh should only be included in FS, so protecting it internally should be unnecessary.
src/cpu/exetrace.cc:
Only use tlb.hh in FS
--HG--
extra : convert_revision : 91ea61f2e7970e7146b6d407ee250fcb20cd4d48
use memcpy instead of bcopy
s/u_int32_t/uint32_t/g
fixup endian code to work with solaris
hack to make sure htole() works... Nate, have a good idea to fix this?
src/arch/sparc/faults.cc:
set the reset address to be 40 bits. Makes PC printing easier at least for now.
src/arch/sparc/isa/base.isa:
fix endian issues with condition codes
src/arch/sparc/tlb.hh:
add implemented physical addres constants
src/arch/sparc/utility.hh:
add tlb.hh to utilities
src/base/loader/raw_object.cc:
add a symbol <filename>_start to the symbol table for binaries files
src/base/remote_gdb.cc:
use memcpy instead of bcopy
src/cpu/exetrace.cc:
clean up printing a bit more
src/cpu/m5legion_interface.h:
add tons to the shared interface
src/dev/ethertap.cc:
s/u_int32_t/uint32_t/g
src/dev/ide_atareg.h:
fixup endian code to work with solaris
src/dev/pcidev.cc:
src/sim/param.hh:
hack to make sure htole() works...
--HG--
extra : convert_revision : 4579392184b40bcc1062671a953c6595c685e9b2
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
src/cpu/o3/cpu.cc:
Handle draining properly when CPU isn't actually being used.
src/cpu/simple/atomic.cc:
Be sure to set status properly when draining.
src/mem/bus.cc:
Fix for draining.
--HG--
extra : convert_revision : d9796e6693e974f022159029fc9743c49a970c8f
src/cpu/o3/mem_dep_unit_impl.hh:
Initialize mem dep unit properly, add debug output.
--HG--
extra : convert_revision : 3c56dedfa57de1edc4b1c8f8d9bc94e18002eff2
src/cpu/base.cc:
Move clock phase drift code to the base CPU so that any CPU model can use it.
src/cpu/base.hh:
Added two functions to help get the next cycle the CPU should be scheduled.
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Use the function now in BaseCPU.
--HG--
extra : convert_revision : 444494b66ffc85fc473c23f57683c5f9458ad80c
SConstruct:
Add check to see if we need to include libsocket
src/arch/sparc/floatregfile.cc:
src/arch/sparc/intregfile.cc:
use memset rather than bzero and include the appropriate headerfile
src/base/pollevent.cc:
If we're compling under solaris we need sys/file.h
src/base/random.cc:
src/base/random.hh:
solaris doesn't have random(), so use rint with the correct rounding mode
if we're compiling on solaris
src/base/stats/flags.hh:
u_int32_t??
src/base/time.hh:
grab the timersub() define from freebsd since it doesn't exist in solaris
src/cpu/inst_seq.hh:
we don't need to include stdint here
src/sim/byteswap.hh:
the method to detect endianness on Solaris is a little more complex...
--HG--
extra : convert_revision : 6b7db0e900e7bccfc250d65c125065f27280dda1
src/cpu/simple_thread.cc:
Fix up port handling to share code.
src/cpu/thread_state.cc:
Separate code off into a function.
src/cpu/thread_state.hh:
Make a separate function that will get the CPU's memory's functional port.
--HG--
extra : convert_revision : 96a9bb3c5e4b9ba5511678c0fd17f0017c8cd312
src/cpu/simple_thread.cc:
This function should have been deleted from an earlier push.
src/cpu/simple_thread.hh:
Delete this function; it's now in thread_state.hh/.cc.
--HG--
extra : convert_revision : f78dcf9c2b388418030d48d0ea4911c8b8b1f5ff
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-busfix
configs/example/fs.py:
configs/example/se.py:
src/mem/tport.hh:
Hand merge.
--HG--
extra : convert_revision : b9df95534d43b3b311f24ae24717371d03d615bf
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
src/cpu/simple/atomic.hh:
Port now takes in the MemObject that owns it.
src/cpu/simple/timing.hh:
Port now takes in MemObject that owns it.
src/dev/io_device.cc:
src/mem/bus.hh:
Ports now take in the MemObject that owns it.
src/mem/cache/base_cache.cc:
Ports now take in the MemObject that own it.
src/mem/port.hh:
src/mem/tport.hh:
Ports now optionally take in the MemObject that owns it.
--HG--
extra : convert_revision : 890a72a871795987c2236c65937e06973412d349
src/cpu/simple/base.cc:
Make a microcoded op start at the current micropc, rather than starting at 0.
src/cpu/thread_state.cc:
Serialize the microPC and nextMicroPC
--HG--
extra : convert_revision : 5302215f17312ecef3ff4c6548acb05297ee4ff6
src/cpu/base_dyn_inst.hh:
Extend BaseDynInst a little bit so it can be use as a TC as well (specifically for ll/sc code).
src/cpu/base_dyn_inst_impl.hh:
Add variable to track if the result of the instruction should be recorded.
src/cpu/o3/alpha/cpu_impl.hh:
Clear lock flag upon hwrei.
src/cpu/o3/lsq_unit.hh:
Use ISA specified handling of locked reads.
src/cpu/o3/lsq_unit_impl.hh:
Use ISA specified handling of locked writes.
--HG--
extra : convert_revision : 1f5c789c35deb4b016573c02af4aab60d726c0e5
Fix fixPacket assert function.
Stop timing port from forwarding the request if a response was found in its queue on a read.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/python/m5/objects/MemTest.py:
Add parameter to configure what percentage of mem accesses are functional
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Use fix Packet function
src/mem/packet.cc:
Fix an assert that was checking the wrong thing
src/mem/tport.cc:
Properly detect if we need to do the access to the functional device
--HG--
extra : convert_revision : 447cc1a9a65ddd2a41e937fb09dc0e7c74e9c75e
src/cpu/memtest/memtest.cc:
Fix memtest to do functional accesses
src/mem/cache/cache_impl.hh:
Fix cache to handle functional accesses properly based on memtester changes
Still need to fix functional accesses in timing mode now that the memtester can test it.
--HG--
extra : convert_revision : a6dbca4dc23763ca13560fbf5d41a23ddf021113
?? doesn't compile in warn statements
Should have been false, where I had a true.
src/cpu/o3/lsq_impl.hh:
Apparently you can't have ?? in a warn statement (Something about trigraphs)
src/mem/cache/cache_impl.hh:
Forgot to signal atomic mode in snoopProbe
--HG--
extra : convert_revision : c75cb76e193e852284564993440c8ea39e6de426
src/cpu/exetrace.cc:
Fixed up to deal with microcode, and to make floating point register numbers correlate to the numbers used in SPARC.
util/statetrace/arch/tracechild_sparc.cc:
util/statetrace/arch/tracechild_sparc.hh:
Make floating point register numbers correlate to the numbers used in SPARC.
--HG--
extra : convert_revision : 878897292f696092453cf61d6eac2d1c407ca13b
Still a bug in atomic uni-coherence in FS.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
Make CPU models handle coherence requests
src/mem/cache/base_cache.cc:
Properly signal coherence CSHRs
src/mem/cache/coherence/uni_coherence.cc:
Only deallocate once
--HG--
extra : convert_revision : c4533de421c371c5532ee505e3ecd451511f5c99
src/arch/sparc/isa/formats/blockmem.isa:
Several small and medium bug fixes.
src/cpu/simple/base.cc:
Fixed a few compiler errors and made sure the next micro pc is set to 1 to prevent the first microop from executing twice. Also fixed a fetching bug.
src/cpu/thread_state.cc:
Made sure the microPC and nextMicroPC are initialized properly.
--HG--
extra : convert_revision : a0fc8aa18d1ade916f17c557181a793c6108a8af
src/cpu/o3/fetch_impl.hh:
Move assertion to area where it should really always be true. Sometimes you might recvRetry and not necessarily be blocked (if there was a squash).
--HG--
extra : convert_revision : 76ad35357e7f4c44fa544ffed071096a62053018
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem
src/cpu/simple/timing.cc:
hand merge
--HG--
extra : convert_revision : 083bf102249ad9bc63c447dbf85d3863f935f647
src/cpu/simple/atomic.cc:
memory mode assertion change so that it only goes off if it's supposed to.
src/cpu/simple/timing.cc:
some drain changes (kevin's) and some changes to memoryMode assertions so that they don't go off when they're not supposed to.
--HG--
extra : convert_revision : 007d8610f097e08f01367b905ada49f93cf37ca3
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Make Memtester able to test atomic as well
src/mem/bus.cc:
src/mem/bus.hh:
Handle atomic snoops properly for cache->cache transfers
src/mem/cache/cache_impl.hh:
Debug output.
Clean up memleak in atomic mode.
Set hitLatency.
Still need to send back reasonable number for atomic return value.
src/mem/packet.cc:
Add command strings for new commands
src/python/m5/objects/MemTest.py:
Add param to test atomic memory.
--HG--
extra : convert_revision : 43f880e29215776167c16ea90793ebf8122c785b
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
src/cpu/o3/cpu.cc:
Comment out reseting CPU structures for now. This can be updated to work in the future.
--HG--
extra : convert_revision : bc1a86e2fe47da5acb14ba8b64568b0355431f1c
src/cpu/memtest/memtest.cc:
Fix functional return path
src/cpu/memtest/memtest.hh:
Add snoop ranges in
src/mem/cache/base_cache.cc:
Properly signal NACKED
src/mem/cache/cache_impl.hh:
Catch nacked packet and panic for now
--HG--
extra : convert_revision : 59a64e82254dfa206681c5f987e6939167754d67
src/cpu/checker/thread_context.hh:
Checker's TC should only copy state, and not fully take over from the old context (prevents it from accidentally stealing the quiesce event).
--HG--
extra : convert_revision : 5760f9c5bae749f8d1df35e4c898df13e41b0224
src/cpu/SConscript:
Add memtester to the compilation environment.
Someone who knows this better should make the MemTest a cpu model parameter.
For now attached with the build of o3 cpu.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Update Memtest for new mem system
src/python/m5/objects/MemTest.py:
Update memtest python description
--HG--
extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
src/cpu/simple/atomic.cc:
add in serialization of AtomicSimpleCPU _status. Kev says that this will break uniform serialization across CPUs since each type of CPU has its own "status" enum set. So, the repercussions are that if you serialize in this CPU, you must first unserialize in this CPU before switching to something else you want.
--HG--
extra : convert_revision : 7000f660aecea6fef712bf81853d9a7b90d625ee
If the cpu needs to update any state when it gets a functional write (LSQ??)
then that code needs to be written.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
CPU's can recieve functional accesses, they need to determine if they need to do anything with them.
src/mem/bus.cc:
src/mem/bus.hh:
Make the fuctional path do the correct tye of snoop
--HG--
extra : convert_revision : 70d09f954b907a8aa9b8137579cd2b06e02ae2ff
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.
src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
--HG--
extra : convert_revision : 6ce982d44924cc477e049b9adf359818908e72be
src/cpu/simple/timing.cc:
Record numCycles stat properly.
src/cpu/simple/timing.hh:
Extra variable to help record numCycles stat.
--HG--
extra : convert_revision : 343311902831820264878aad41dc619999726b6b
src/cpu/o3/commit_impl.hh:
Fixes for compile and sampling.
src/cpu/o3/cpu.cc:
Deallocate and activate threads properly. Also hopefully fix being able to use caches while switching over.
src/cpu/o3/cpu.hh:
Fixes for deallocating and activating threads.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit.hh:
Handle getting back a BadAddress result from the access.
src/cpu/o3/iew_impl.hh:
More debug output.
src/cpu/o3/lsq_unit_impl.hh:
Fixup store conditional handling (still a bit of a hack, but works now).
Also handle getting back a BadAddress result from the access.
src/cpu/o3/thread_context_impl.hh:
Deallocate context now records if the context should be fully removed.
--HG--
extra : convert_revision : 55f81660602d0e25367ce1f5b0b9cfc62abe7bf9
src/SConscript:
Include MemTest for now. It's not complete but it compiles so it shouldn't mess anything else up.
--HG--
extra : convert_revision : 15a610c855b677fdced817850c92e4c911cf6d1c
1) return the periodicity of checkpoints back into the code (i.e. make m5 checkpoint n m meaningful again).
2) to do this, i had to much around with being able to repeatedly schedule and SimLoopExitEvent, which led to changes in how exit simloop events are handled to make this easier.
src/arch/alpha/isa/decoder.isa:
src/mem/cache/cache_impl.hh:
modify arg. order for new calling convention of exitSimLoop.
src/cpu/base.cc:
src/sim/main.cc:
src/sim/pseudo_inst.cc:
src/sim/root.cc:
now, instead of creating a new SimLoopExitEvent, call a wrapper schedExitSimLoop which handles all the default args.
src/sim/sim_events.cc:
src/sim/sim_events.hh:
src/sim/sim_exit.hh:
add the periodicity of checkpointing back into the code.
to facilitate this, there are now two wrappers (instead of just overloading exitSimLoop). exitSimLoop is only for exiting NOW (i.e. at curTick), while schedExitSimLoop schedules and exit event for the future.
--HG--
extra : convert_revision : c61f4bf05517172edd2c83368fd10bb0f0678029
into zeep.eecs.umich.edu:/home/gblack/m5/newmem
src/cpu/ozone/cpu_impl.hh:
Hand merged
--HG--
extra : convert_revision : f8a5b0205bcb78c8f5e109f456fe7bca80a7abac
src/arch/alpha/isa_traits.hh:
This got changed to the wrong version by accident.
src/cpu/base.cc:
Fix up progress event to not schedule itself if the interval is set to 0.
src/cpu/base.hh:
Fix up the CPU Progress Event to not print itself if it's set to 0. Also remove stats_reset_inst (something I added to m5 but isn't necessary here).
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
Remove float variable of instResult; it's always held within the double part now.
src/cpu/checker/cpu_impl.hh:
Use thread and not cpuXC.
src/cpu/o3/alpha/cpu_builder.cc:
src/cpu/o3/checker_builder.cc:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu_builder.cc:
src/python/m5/objects/BaseCPU.py:
Remove stats_reset_inst.
src/cpu/o3/commit_impl.hh:
src/cpu/ozone/lw_back_end_impl.hh:
Get TC, not XCProxy.
src/cpu/o3/cpu.cc:
Switch out updates from the version of m5 I have. Also remove serialize code that got added twice.
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/thread_state.hh:
Remove code that was added twice.
src/cpu/o3/lsq_unit.hh:
Add back in stats that got lost in the merge.
src/cpu/o3/lsq_unit_impl.hh:
Use proper method to get flags. Also wake CPU if we're coming back from a cache miss.
src/cpu/o3/thread_context_impl.hh:
src/cpu/o3/thread_state.hh:
Support profiling.
src/cpu/ozone/cpu.hh:
Update to use proper typename.
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst_impl.hh:
Updates for newmem.
src/cpu/ozone/lw_lsq_impl.hh:
Get flags correctly.
src/cpu/ozone/thread_state.hh:
Reorder constructor initialization, use tc.
src/sim/pseudo_inst.cc:
Allow for loading of symbol file. Be sure to use ThreadContext and not ExecContext.
--HG--
extra : convert_revision : c5657f84155807475ab4a1e20d944bb6f0d79d94
src/cpu/o3/fetch_impl.hh:
Fix ordering so dereference works
src/cpu/o3/lsq_impl.hh:
Check to make sure we didn't squash already
src/cpu/o3/lsq_unit.hh:
Fix for counting squashed retrys in the WB count
src/cpu/o3/lsq_unit_impl.hh:
Make sure to set retryID for stores, and clear it appropriately
--HG--
extra : convert_revision : 689765a1baea7b36f13eb177d65e97b52b6da09f
src/arch/alpha/regfile.hh:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/cpu/exetrace.hh:
Added functions to start to support dumping register values once per cycle.
src/cpu/exetrace.cc:
Added some code to support printing the value of registers after each cycle.
src/python/m5/main.py:
Options to turn on output after every instruction. They are commented out.
--HG--
extra : convert_revision : 168a48a6b98ab6be412a96bdee831c71906958b0
src/arch/mips/isa/base.isa:
special case syscall disasembly... maybe give own instruction class?
src/arch/mips/isa/decoder.isa:
add 'IsSerializeAfter' flag for syscall
src/cpu/o3/commit.hh:
Add skidBuffer to commit
src/cpu/o3/commit_impl.hh:
Use skidbuffer in MIPS ISA
src/cpu/o3/fetch_impl.hh:
Print name out when there is a fault
src/cpu/o3/mips/cpu_impl.hh:
change comment
--HG--
extra : convert_revision : d032549e07102bdd50aa09f044fce8de6f0239b5
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : be1e5dcb1c5025db8526e628c2060b1790d38227
succesfully but there are some minor quirks to iron out. Who would've known a DELAY SLOT introduces that much complexity?! arrgh!
Anyways, a lot of this stuff had to do with my project at MIPS and me needing to know how I was going to get this working for the MIPS
ISA. So I figured I would try to touch it up and throw it in here (I hate to introduce non-completely working components... )
src/arch/alpha/isa/mem.isa:
spacing
src/arch/mips/faults.cc:
src/arch/mips/faults.hh:
Gabe really authored this
src/arch/mips/isa/decoder.isa:
add StoreConditional Flag to instruction
src/arch/mips/isa/formats/basic.isa:
Steven really did this file
src/arch/mips/isa/formats/branch.isa:
fix bug for uncond/cond control
src/arch/mips/isa/formats/mem.isa:
Adjust O3CPU memory access to use new memory model interface.
src/arch/mips/isa/formats/util.isa:
update LoadStoreBase template
src/arch/mips/isa_traits.cc:
update SERIALIZE partially
src/arch/mips/process.cc:
src/arch/mips/process.hh:
no need for this for NOW. ASID/Virtual addressing handles it
src/arch/mips/regfile/misc_regfile.hh:
add in clear() function and comments for future usage of special misc. regs
src/cpu/base_dyn_inst.hh:
add in nextNPC variable and supporting functions.
add isCondDelaySlot function
Update predTaken and mispredicted functions
src/cpu/base_dyn_inst_impl.hh:
init nextNPC
src/cpu/o3/SConscript:
add MIPS files to compile
src/cpu/o3/alpha/thread_context.hh:
no need for my name on this file
src/cpu/o3/bpred_unit_impl.hh:
Update RAS appropriately for MIPS
src/cpu/o3/comm.hh:
add some extra communication variables to aid in handling the
delay slots
src/cpu/o3/commit.hh:
minor name fix for nextNPC functions.
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rename_impl.hh:
Fix necessary variables and functions for squashes with delay slots
src/cpu/o3/cpu.cc:
Update function interface ...
adjust removeInstsNotInROB function to recognize delay slots insts
src/cpu/o3/cpu.hh:
update removeInstsNotInROB
src/cpu/o3/decode.hh:
declare necessary variables for handling delay slot
src/cpu/o3/dyn_inst.hh:
Add in MipsDynInst
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/rename.hh:
declare necessary variables and adjust functions for handling delay slot
src/cpu/o3/inst_queue.hh:
src/cpu/simple/base.cc:
no need for my name here
src/cpu/o3/isa_specific.hh:
add in MIPS files
src/cpu/o3/scoreboard.hh:
dont include alpha specific isa traits!
src/cpu/o3/thread_context.hh:
no need for my name here, i just rearranged where the file goes
src/cpu/static_inst.hh:
add isCondDelaySlot function
src/cpu/o3/mips/cpu.cc:
src/cpu/o3/mips/cpu.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/mips/dyn_inst.cc:
src/cpu/o3/mips/dyn_inst.hh:
src/cpu/o3/mips/dyn_inst_impl.hh:
src/cpu/o3/mips/impl.hh:
src/cpu/o3/mips/params.hh:
src/cpu/o3/mips/thread_context.cc:
src/cpu/o3/mips/thread_context.hh:
MIPS file for O3CPU...mirrors ALPHA definition
--HG--
extra : convert_revision : 9bb199b4085903e49ffd5a4c8ac44d11460d988c
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/fs.py:
Hand merge.
--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
SConstruct:
Include an option to specify the CPUs being tested.
src/cpu/SConscript:
Checker isn't SMT right now, so don't do SMT tests with the O3CPU if we're using the checker.
src/python/m5/objects/O3CPU.py:
Include default options. Unfortunately FullO3Config.py is still needed because it specifies which FUPool is being used.
tests/SConscript:
Several minor updates (sorry for one commit). Updated the copyright and fixed some m5 style issues. Also added the ability to specify which CPUs to run the tests on.
--HG--
extra : convert_revision : b0b801115705544ea02e572e31314f7bb8b5f0f2
Add a max time option in seconds and a single system root clock be 1THz
configs/test/fs.py:
Add a max time option in seconds and a single system root clock be 1THz
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Enforce the timing cpu ticking at it's clock rate
--HG--
extra : convert_revision : a1b0de27abde867f9c3da5bec11639e3d82a95f5
src/cpu/checker/cpu.hh:
Don't count checker's instructions towards total instructions committed.
src/python/m5/objects/Root.py:
Set default clock to 1 THz.
--HG--
extra : convert_revision : 0b5eaa197c860c361a3b00087e45ddc249ff1918
Right now only non-SMT SE regression tests have been added back in. The rest are pending getting SMT working, and consolidating the FS configuration files.
Eventually support for different OSs can be added so you can specify which versions of the binary you want to run from one config file.
Note: mp-test1 doesn't have any reference stats because MP mode doesn't currently work. The test itself should probably work once the code is fixed.
SConstruct:
Updates to allow for regression tests to work via the command line "scons build/ALPHA_SE/test/debug/quick" and such once again.
src/cpu/SConscript:
Keep a list of SMT supporting CPUs so that the regression tests can easily specify which CPUs to use if they are SMT only.
--HG--
extra : convert_revision : 34e6286150aae8f316ae694f6c00be8f510522f2
src/cpu/o3/lsq_unit.hh:
LSQ needs to decrement the WB counter if the load is going to be replayed.
src/cpu/o3/lsq_unit_impl.hh:
LSQ needs to decrement the WB counter if the load is squashed.
--HG--
extra : convert_revision : 20a10baf0d6ab46065e561ddba231251865ebdbd
src/arch/SConscript:
Fixes for including the CheckerCPU if it's specified via command line. Previously the env variable was actually being modified.
src/cpu/SConscript:
Copy the CPU_MODELS from the env, don't create a proxy to it.
--HG--
extra : convert_revision : 7d069bd93a6834ccaa1c378b2bc76dce76745c19
suspend context will now take the thread off the activeThread list.
src/arch/mips/isa_traits.cc:
add in copy MiscRegs unimplemented function
--HG--
extra : convert_revision : 3ed5320b3786f84d4bb242e3a32b6f415339c3ba
src/cpu/o3/lsq.hh:
Update to have LSQ work with only one dcache port for all LSQ Units. LSQ has the dcache port, and the LSQ Units must tell the LSQ if the cache has become blocked.
src/cpu/o3/lsq_impl.hh:
Updates to have the LSQ work with only one dcache port for all LSQUnits.
src/cpu/o3/lsq_unit.hh:
src/cpu/o3/lsq_unit_impl.hh:
Update for LSQ to create dcache port instead of LSQUnits. Now LSQUnits are given the dcache port from the LSQ, and also must check the LSQ if the cache is blocked prior to accessing the cache.
--HG--
extra : convert_revision : 2708adbf323f4e7647dc0c1e31ef5bb4596b89f8
States are now running, draining, or drained. memory state information moved into system object
system parameter is not fs only for cpus
Implement drain() support in devices
Update for drain() call that returns number of times drain_event->process() will be called
Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
Since se mode has a system, allow access to it
Verify that the atomic cpu is connected to an atomic system on resume
src/cpu/simple/base.cc:
Since se mode has a system, allow access to it
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system
Since se mode has a system, allow access to it
Verify that the timing cpu is connected to an timing system on resume
src/dev/ide_disk.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
src/dev/sinic.hh:
Implement drain() support in devices
src/python/m5/config.py:
Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times
src/python/m5/objects/BaseCPU.py:
move system parameter out of fs to everyone
src/sim/sim_object.cc:
src/sim/sim_object.hh:
States are now running, draining, or drained. memory state information moved into system object
src/sim/system.cc:
src/sim/system.hh:
memory mode information now contained in system object
--HG--
extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/test.py:
Hand merge.
--HG--
extra : convert_revision : e3fce9cf50a65a9400cd3ec887b13e4765274ec2
src/cpu/o3/commit_impl.hh:
Always set instruction. This is necessary for serialization as the instruction is also serialized.
src/cpu/o3/cpu.cc:
Change serialization so it matches other CPU's output. Also fix up some indexing.
--HG--
extra : convert_revision : 52f6e183132d177bed6e29dd7cf0c10aed6d8534
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem
src/cpu/o3/fetch_impl.hh:
Hand merge.
--HG--
extra : convert_revision : 820dab2bc921cbadecaca51cd069327f984f5c74
Now hello world works with 2 levels of cache with O3 CPU(multiple outstanding requests).
src/cpu/o3/fetch_impl.hh:
Fix ordering issue with squashed Icache Fetches and Static data in packet.
--HG--
extra : convert_revision : a6adb87540b007ead0b4982cb3f31da8199fb5ca
src/cpu/SConscript:
Change the error message to be slightly nicer.
src/cpu/o3/commit.hh:
Remove old code.
src/cpu/o3/commit_impl.hh:
Remove old unused code.
--HG--
extra : convert_revision : 48aa430e1f3554007dd5e4f3d9e89b5e4f124390
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 9098d989832e2a5818b80771e3c02170c5c8cd5b
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_back_end.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/python/m5/objects/OzoneCPU.py:
Support Ron's recent port changes.
src/cpu/ozone/lw_back_end_impl.hh:
Support Ron's recent port changes. Also support handling faults in SE.
--HG--
extra : convert_revision : aa1ba5111b70199c052da3e13bae605525a69891
src/cpu/checker/cpu.hh:
Now that BaseCPU is a MemObject, the checker must define this function.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/lsq.hh:
src/cpu/o3/lsq_unit.hh:
Implement getPort function so the connector can connect the ports properly.
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/lsq_unit_impl.hh:
The connector handles connecting the ports now.
src/python/m5/objects/O3CPU.py:
Add ports to the parameters.
--HG--
extra : convert_revision : 0b1a216b9a5d0574e62165d7c6c242498104d918
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : f97469b7d19c82deb3d068f80546d729757c25e3
Still, there is a problem with the LSQ and indexing out of range in the buffer.
I havent nailed down the fix yet, but it's coming ...
src/cpu/o3/commit_impl.hh:
add space to DPRINT
src/cpu/o3/cpu.cc:
add newline to DPRINT
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
Each thread needs it's own squashedSeqNum for the case where they are both squashing at the same time and they dont
write over each other's squash number.
--HG--
extra : convert_revision : 2155421a8b5b20e4544eea3d3c53d3e715465fa6
src/cpu/o3/cpu.cc:
Fix up keeping proper state when switched out and drained.
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Keep track of the event we use to schedule fetch initially and upon resume. We may have to cancel the event if the CPU is switched out.
--HG--
extra : convert_revision : 60a2a1bd2cdc67bd53ca4a67aa77166c826a4c8c
configs/test/test.py:
Update to use new cpu getPort functionality
src/cpu/base.cc:
Make cpu's a memObject to expose getPort interface
src/cpu/base.hh:
Make cpu's a memObject to export getPort interface
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Now use the connector via getPort interface
src/mem/cache/base_cache.cc:
Make sure the cache recognizes all port names
--HG--
extra : convert_revision : dbfefa978ec755bc8aa6f962ae158acf32dafe61
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 90717b492139428e0c48be35a6bda45960c61086
Major thing was to not execute commit if there are no active threads in CPU.
src/cpu/o3/alpha/thread_context.hh:
call deallocate instead of deallocateContext
src/cpu/o3/commit_impl.hh:
dont run commit stage if there are no instructions
src/cpu/o3/cpu.cc:
add deallocate event, deactivateThread function, and edit deallocateContext.
src/cpu/o3/cpu.hh:
add deallocate event and add optional delay to deallocateContext
src/cpu/o3/thread_context.hh:
optional delay for deallocate
src/cpu/o3/thread_context_impl.hh:
edit DPRINTFs to say Thread Context instead of Alpha TC
src/cpu/thread_context.hh:
optional delay
src/sim/syscall_emul.hh:
name stuff
--HG--
extra : convert_revision : f4033e1f66b3043d30ad98dcc70d8b193dea70b6
src/cpu/o3/commit_impl.hh:
Fix to clear drainPending variable on call to resume.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
Support serializing and unserializing in the O3 CPU.
src/cpu/o3/lsq_impl.hh:
Be sure to say we have no stores to write back if the active thread list is empty.
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
Slightly change how SimpleThread is used to copy from other ThreadContexts.
--HG--
extra : convert_revision : 92a5109b3783a989d5b451036061ef82c56d3121
src/cpu/o3/commit.hh:
src/cpu/o3/commit_impl.hh:
src/cpu/o3/decode.hh:
src/cpu/o3/decode_impl.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/iew.hh:
src/cpu/o3/iew_impl.hh:
src/cpu/o3/rename.hh:
src/cpu/o3/rename_impl.hh:
Return a value so that the CPU can instantly return from draining if the pipeline is already drained.
src/cpu/o3/cpu.cc:
Use values returned from pipeline stages so that the CPU can instantly return from draining if the pipeline is already drained.
--HG--
extra : convert_revision : d8ef6b811644ea67c8b40c4719273fa224105811
src/arch/alpha/regfile.hh:
Define serialize/unserialize functions on MiscRegFile itself.
src/cpu/o3/regfile.hh:
Remove old commented code.
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
Push common serialization code to ThreadState level. Also allow the SimpleThread to be used for checkpointing by other models.
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
Move common serialization code into ThreadState.
--HG--
extra : convert_revision : ef64ef515355437439af967eda2e610e8c1b658b
Still need
1) detailed CPU (blocking ability in cache)
1a) Multiple outstanding requests (need to keep track of times for events)
2)Multi-level support
3)MP coherece support
4)LL/SC support
5)Functional path needs to be correctly implemented (temporarily works without multiple outstanding requests (simple cpu))
src/cpu/simple/timing.cc:
Temp hack because timing cpu doesn't export ports properly so single I/D cache communicates only through the Icache port.
src/mem/cache/base_cache.cc:
Handle marking MSHR's in service
Add support for getting CSHR's
src/mem/cache/base_cache.hh:
Make these functions visible at the base cache level
src/mem/cache/cache.hh:
make the functions virtual
src/mem/cache/cache_impl.hh:
Rename the function to make sense
src/mem/packet.hh:
Accidentally clearing the needsResponse field when sending a response back.
--HG--
extra : convert_revision : 2325d4e0b77e470fa9da91490317dc8ed88b17e2
src/cpu/simple/timing.cc:
Update for changed return values.
src/python/m5/__init__.py:
Loop in order to make sure all objects are really drained. Objects may become undrained as other objects become drained (e.g. a bus-bridge has a packet, while a bus is empty, and the first drain() will cause the bus-bridge to give the packet to the bus).
The only case we know every object is actually drained is if they all return immediately that they are drained.
--HG--
extra : convert_revision : 80057a1d6d30381bd0b67b23549bd202f447c5cb
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 2f08ea52ef54118d42aa590c0d86aa0cc7988713
src/cpu/cpu_models.py:
Use O3DynInst
src/cpu/o3/dyn_inst.hh:
declare O3DynInst here based off of ISA ... this must be updated for each ISA.
src/cpu/static_inst.hh:
take out O3 forward declarations here and include header file to keep this file clean
--HG--
extra : convert_revision : 0d65463479c3cfc2d1154935b1032dae32c5efd0
src/arch/mips/isa/formats/fp.isa:
Adjust for newmem
src/cpu/cpu_models.py:
Use O3DynInst instead of convoluted way
src/cpu/o3/alpha/impl.hh:
take out O3DynInst typedef here ...
src/cpu/o3/cpu.cc:
open up the SMT functions in the O3CPU
src/cpu/static_inst.hh:
Add O3DynInst
src/cpu/o3/dyn_inst.hh:
Use to get ISA-specific O3DynInst
--HG--
extra : convert_revision : 3713187ead93e336e80889e23a1f1d2f36d664fe
src/cpu/checker/cpu_impl.hh:
The only fault we handle in SE causes troubles when invoked with the Checker. This is because it changes state within the process, and not the checker, so the state isn't correct when the main CPU calls invoke. It's safe to just ignore the fault in the Checker and continue.
--HG--
extra : convert_revision : 5000d763a75009c7a6011646a6790ac5b23df6bb
src/base/traceflags.py:
Remove BaseCPU traceflag.
src/cpu/o3/alpha/params.hh:
Move non-Alpha specific parameters out of this params class.
src/cpu/o3/params.hh:
Move non-Alpha specific params into this params class.
--HG--
extra : convert_revision : e5b652adb47a240376733400e6054c66c50bd514
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
src/base/traceflags.py:
src/cpu/SConscript:
Hand merge.
src/cpu/o3/alpha/params.hh:
Hand merge. This needs to get changed.
--HG--
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : 581f338f5bce35288f7d15d95cbd0ac3a9135e6a
src/cpu/o3/alpha_cpu_builder.cc:
src/cpu/o3/alpha_params.hh:
Add in dispatchWidth, wbWidth, wbDepth parameters. wbDepth is the number of cycles of wbWidth instructions that can be buffered.
src/cpu/o3/iew.hh:
Include separate parameter for dispatch width.
Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed. The IQ must make sure with the IEW stage that it can issue instructions prior to issuing.
src/cpu/o3/iew_impl.hh:
Include separate parameter for dispatch width.
Also limit the number of outstanding writebacks so the writeback buffer isn't overflowed.
src/cpu/o3/inst_queue_impl.hh:
IQ needs to check with the IEW to make sure it can issue instructions, and increments the IEW wb counter each time there is an outstanding instruction that will writeback.
src/cpu/o3/lsq_unit_impl.hh:
Be sure to decrement the writeback counter if there's a squashed load that returned.
src/python/m5/objects/AlphaO3CPU.py:
Change the parameters to include dispatch width, writeback width, and writeback depth.
--HG--
extra : convert_revision : 31c8cc495273e3c481b79055562fc40f71291fc4
Properly implement the MSHR allocate function.
src/cpu/simple/timing.cc:
Set the thread context in the CPU.
Need to do this properly, currently I just set it to Cpu=0 Thread=0. This will just cause all the stats in the cache based on these to just yield totals and not a distribution.
src/mem/cache/miss/mshr.cc:
Properly implement the allocate function for the MSHR.
--HG--
extra : convert_revision : bcece518e54ed1404db3196f996a77b4dd5c1c1e
src/cpu/o3/alpha/thread_context.hh:
Use 'this' when accessing cpu
src/cpu/o3/cpu.hh:
add numActiveThreds function
src/cpu/o3/thread_context.hh:
forward class declarations
src/cpu/o3/thread_context_impl.hh:
add quiesce event header file
src/cpu/thread_context.hh:
add exit() function to thread context (read comments in file)
src/sim/syscall_emul.cc:
adjust exitFunc syscall
--HG--
extra : convert_revision : 323dc871e2b4f4ee5036be388ceb6634cd85a83e
Edit Test3 for newmem
src/base/traceflags.py:
Add O3CPU flag
src/cpu/base.cc:
for some reason adding a BaseCPU flag doesnt work so just go back to old way...
src/cpu/o3/alpha/cpu_builder.cc:
Determine number threads by workload size instead of solely by parameter.
Default SMT fetch policy to RoundRobin if it's not specified in Config file
src/cpu/o3/commit.hh:
only use nextNPC for !ALPHA
src/cpu/o3/commit_impl.hh:
add FetchTrapPending as condition for commit
src/cpu/o3/cpu.cc:
panic if active threads is more than Impl::MaxThreads
src/cpu/o3/fetch.hh:
src/cpu/o3/inst_queue.hh:
src/cpu/o3/inst_queue_impl.hh:
src/cpu/o3/rob.hh:
src/cpu/o3/rob_impl.hh:
name stuff
src/cpu/o3/fetch_impl.hh:
fatal if try to use SMT branch count, that's unimplemented right now
src/python/m5/config.py:
make it clearer that a parameter is not valid within a configuration class
--HG--
extra : convert_revision : 55069847304e40e257f9225f0dc3894ce6491b34
src/base/traceflags.py:
add BaseCPU flag, O3CPUAll flag grouping
src/cpu/base.cc:
Use BaseCPU flag instead of FullCPU flag
--HG--
extra : convert_revision : 32f737a2f58eb936634799f1f809e07cbba90179
add activateThread event and functions
src/cpu/o3/alpha/cpu_builder.cc:
Have CPU builder build a DerivO3CPU not a DerivAlphaO3CPU
src/cpu/o3/cpu.cc:
add activateThread Event
add activateThread function
adjust activateContext to schedule a thread to activate within the
CPU instead of activating thread right away. This will lead to stages
trying to use threads that arent ready yet and wasting execution time & possibly
performance.
src/cpu/o3/cpu.hh:
add activateThread Event
add activateThread function
add schedule/descheculed activate thread event
--HG--
extra : convert_revision : 236d30dc160910507ad36f7f527ab185ed38dc04
into zizzer.eecs.umich.edu:/.automount/zooks/y/ksewell/research/m5-sim/newmem-o3
--HG--
extra : convert_revision : 3c1405d8b4831c6240e02ba65a72043ca55f4a46
Use O3CPU when building instead of AlphaO3CPU.
I could use some better python magic in the cpu_models.py file!
AUTHORS:
add middle initial
SConstruct:
change from AlphaO3CPU to O3CPU
src/cpu/SConscript:
edits to build O3CPU instead of AlphaO3CPU
src/cpu/cpu_models.py:
change substitution template to use proper CPU EXEC CONTEXT For O3CPU Model...
Actually, some Python expertise could be used here. The 'env' variable is not
passed to this file, so I had to parse through the ARGV to find the ISA...
src/cpu/o3/base_dyn_inst.cc:
src/cpu/o3/bpred_unit.cc:
src/cpu/o3/commit.cc:
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/decode.cc:
src/cpu/o3/fetch.cc:
src/cpu/o3/iew.cc:
src/cpu/o3/inst_queue.cc:
src/cpu/o3/lsq.cc:
src/cpu/o3/lsq_unit.cc:
src/cpu/o3/mem_dep_unit.cc:
src/cpu/o3/rename.cc:
src/cpu/o3/rob.cc:
use isa_specific.hh
src/sim/process.cc:
only initi NextNPC if not ALPHA
src/cpu/o3/alpha/cpu.cc:
alphao3cpu impl
src/cpu/o3/alpha/cpu.hh:
move AlphaTC to it's own file
src/cpu/o3/alpha/cpu_impl.hh:
Move AlphaTC to it's own file ...
src/cpu/o3/alpha/dyn_inst.cc:
src/cpu/o3/alpha/dyn_inst.hh:
src/cpu/o3/alpha/dyn_inst_impl.hh:
include paths
src/cpu/o3/alpha/impl.hh:
include paths, set default MaxThreads to 2 instead of 4
src/cpu/o3/alpha/params.hh:
set Alpha Specific Params here
src/python/m5/objects/O3CPU.py:
add O3CPU class
src/cpu/o3/SConscript:
include isa-specific build files
src/cpu/o3/alpha/thread_context.cc:
NEW HOME of AlphaTC
src/cpu/o3/alpha/thread_context.hh:
new home of AlphaTC
src/cpu/o3/isa_specific.hh:
includes ISA specific files
src/cpu/o3/params.hh:
base o3 params
src/cpu/o3/thread_context.hh:
base o3 thread context
src/cpu/o3/thread_context_impl.hh:
base o3 thead context impl
--HG--
rename : src/cpu/o3/alpha_cpu.cc => src/cpu/o3/alpha/cpu.cc
rename : src/cpu/o3/alpha_cpu.hh => src/cpu/o3/alpha/cpu.hh
rename : src/cpu/o3/alpha_cpu_builder.cc => src/cpu/o3/alpha/cpu_builder.cc
rename : src/cpu/o3/alpha_cpu_impl.hh => src/cpu/o3/alpha/cpu_impl.hh
rename : src/cpu/o3/alpha_dyn_inst.cc => src/cpu/o3/alpha/dyn_inst.cc
rename : src/cpu/o3/alpha_dyn_inst.hh => src/cpu/o3/alpha/dyn_inst.hh
rename : src/cpu/o3/alpha_dyn_inst_impl.hh => src/cpu/o3/alpha/dyn_inst_impl.hh
rename : src/cpu/o3/alpha_impl.hh => src/cpu/o3/alpha/impl.hh
rename : src/cpu/o3/alpha_params.hh => src/cpu/o3/alpha/params.hh
rename : src/python/m5/objects/AlphaO3CPU.py => src/python/m5/objects/O3CPU.py
extra : convert_revision : d377d6417452ac337bc502f28b2fde907d6b340e
Need to clean up a bunch of flags/hacks in the code. Then onto Timming mode.
Functional accesses also work properly, although not exactly how we wanted them. I'll need to clean that up as well.
src/cpu/simple/atomic.cc:
Atomic CPU needs to set thread context so stats work in cache. Temporarily just use CPU=0 ThreadID=0
src/mem/cache/cache_impl.hh:
Need to return success/failure properly still
Physical memory object doesn't assert SATISFIED anymore, need to remove that flag
src/mem/cache/tags/lru.cc:
Doesn't work if the REQ doesn't set it's ASID. Temporary fix use 0 always
--HG--
extra : convert_revision : d06a39684af593db699b64df9a29f80c61d8d050
src/cpu/base.cc:
src/cpu/base.hh:
src/cpu/simple/atomic.hh:
Switching out no longer takes a sampler.
src/cpu/simple/atomic.cc:
Fix up switching out. Also fix up serialization; the nameOut() was messing up the ordering.
src/cpu/simple/timing.cc:
Add in quiesce, fix up serialization.
src/cpu/simple/timing.hh:
Add in queisce, fix up serialization.
--HG--
extra : convert_revision : 9d59d53bdf269d4d82fb119e5ae7c8a5d475880b
