Allow usage of packet class in ruby for convenience purposes. This may be
used to access members of the packet/request class (e.g., via helper
functions) and/or push protocol specific information to the packets
SenderState without needing to modify SLICC types and protocols in multiple
locations.
This patch removes the write-queue entry tracking previously used for
uncacheable writes. The write-queue entry is now deallocated as soon
as the packet is sent. As a result we also forego the stats for
uncacheable writes. Additionally, there is no longer a need to attach
the write-queue entry to the packet.
Ruby's controller block_on behavior aimed to block MessageBuffer requests into
SLICC controllers when a Locked_RMW was in flight. Unfortunately, this
functionality only partially works: When non-Locked_RMW memory accesses are
issued to the sequencer to an address with an in-flight Locked_RMW, the
sequencer may pass those accesses through to the controller. At the controller,
a number of incorrect activities can occur depending on the protocol. In
MOESI_hammer, for example, an intermediate IFETCH will cause an L1D to L2
transfer, which cannot be serviced, because the block_on functionality blocks
the trigger queue, resulting in a deadlock. Further, if an intermediate store
arrives (e.g. from a separate SMT thread), the sequencer allows the request
through to the controller, and the atomicity of the Locked_RMW may be broken.
To avoid these problems, disallow the Sequencer from passing any memory
accesses to the controller besides Locked_RMW_Write when a Locked_RMW is in-
flight.
A few warnings (and thus errors) pop up after being added to -Wall:
1. -Wmisleading-indentation
In the auto-generated code there were instances of if/else blocks that
were not indented to gcc's liking. This is addressed by adding braces.
2. -Wshift-negative-value
gcc is clever enougn to consider ~0 a negative constant, and
rightfully complains. This is addressed by using mask() which
explicitly casts to unsigned before shifting.
That is all. Porting done.
Queued prefetcher entries now count with a priority field. The idea is to
add packets ordered by priority and then by age.
For the existing algorithms in which priority doesn't make sense, it is set
to 0 for all deferred packets in the queue.
Some common functionality added to the base prefetcher, mainly dealing with
extracting the block address, page address, block index inside the page and
some other information that can be inferred from the block address. This is
used for some prefetching algorithms, and having the methods in the base,
as well as the block size and other information is the sensible way.
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.
The following patches had unexpected interactions with the current
upstream code and have been reverted for now:
e07fd01651f3: power: Add support for power models
831c7f2f9e39: power: Low-power idle power state for idle CPUs
4f749e00b667: power: Add power states to ClockedObject
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
--HG--
extra : amend_source : 0b6fb073c6bbc24be533ec431eb51fbf1b269508
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
Add 4 power states to the ClockedObject, provides necessary access functions
to check and update the power state. Default power state is UNDEFINED, it is
responsibility of the respective simulation model to provide the startup state
and any other logic for state change.
Add number of transition stat.
Add distribution of time spent in clock gated state.
Add power state residency stat.
Add dump call back function to allow stats update of distribution and residency
stats.
The cache queue reserve is there as an overflow to give us enough
headroom based on when we block the cache, and how many transactions
we may already have accepted before actually blocking. The previous
values were probably chosen to be "big enough", when we actually know
that we check the MSHRs after every single allocation, and for the
write buffers we know that we implicitly may need one entry for every
outstanding MSHR.
* * *
mem: Adjust cache queue reserve to more conservative values
The cache queue reserve is there as an overflow to give us enough
headroom based on when we block the cache, and how many transactions
we may already have accepted before actually blocking. The previous
values were probably chosen to be "big enough", when we actually know
that we check the MSHRs after every single allocation, and for the
write buffers we know that we implicitly may need one entry for every
outstanding MSHR.
This patch breaks out the cache write buffer into a separate class,
without affecting any stats. The goal of the patch is to avoid
encumbering the much-simpler write queue with the complex MSHR
handling. In a follow on patch this simplification allows us to
implement write combining.
The WriteQueue gets its own class, but shares a common ancestor, the
generic Queue, with the MSHRQueue.
This patch adds assertions that enforce that only invalidating snoops
will ever reach into the logic that tracks in-order load completion and
also invalidation of LL/SC (and MONITOR / MWAIT) monitors. Also adds
some comments to MSHR::replaceUpgrades().
This patch fixes an issue where an InvalidationReq only traversed one
level of the cache hierarchy, and was subsequently turned into a
ReadExReq due to it needing writable, and the command not being
checked for explicitly.
This patch essentially rolls back 10518:30e3715c9405 to make RubyPort the
parent class of DMASequencer. It removes redundant code and restores some
features which were lost when directly inheriting from MemObject. For
example,
DMASequencer can now communicate to other devices using PIO, which is useful
for memmory-mapped communication between multiple DMADevices.
Avoid being overly conservative in clearing load locks in the cache,
and allow writes to the line if they are from the same context. This
is in line with ALPHA and ARM.
This patch introduces the ability of making the coherent crossbar the
point of coherency. If so, the crossbar does not forward packets where
a cache with ownership has already committed to responding, and also
does not forward any coherency-related packets that are not intended
for a downstream memory controller. Thus, invalidations and upgrades
are turned around in the crossbar, and the memory controller only sees
normal reads and writes.
In addition this patch moves the express snoop promotion of a packet
to the crossbar, thus allowing the downstream cache to check the
express snoop flag (as it should) for bypassing any blocking, rather
than relying on whether a cache is responding or not.
Adopt the same flow as in timing mode, where the caches on the path to
memory get to keep the line (if present), and we use the
responderHadWritable flag to determine if we need to forward the
(invalidating) packet or not.
This patch unifies the snoop handling in case of hitting writebacks
with how we handle snoops hitting in the tags. As a result, we end up
using the same optimisation as the normal snoops, where we inform the
downstream cache if we encounter a line in Modified (writable and
dirty) state, which enables us to avoid sending out express snoops to
invalidate any Shared copies of the line. A few regressions
consequently change, as some transactions are sunk higher up in the
cache hierarchy.
This patch changes how the cache determines if snoops should be
forwarded from the memory side to the CPU side. Instead of having a
parameter, the cache now looks at the port connected on the CPU side,
and if it is a snooping port, then snoops are forwarded. Less error
prone, and less parameters to worry about.
The patch also tidies up the CPU classes to ensure that their I-side
port is not snooping by removing overrides to the snoop request
handler, such that snoop requests will panic via the default
MasterPort implement
Result of running 'hg m5style --skip-all --fix-control -a' to get
rid of '== true' comparisons, plus trivial manual edits to get
rid of '== false'/'== False' comparisons.
Left a couple of explicit comparisons in where they didn't seem
unreasonable:
invalid boolean comparison in src/arch/mips/interrupts.cc:155
>> DPRINTF(Interrupt, "Interrupts OnCpuTimerINterrupt(tc) == true\n");<<
invalid boolean comparison in src/unittest/unittest.hh:110
>> "EXPECT_FALSE(" #expr ")", (expr) == false)<<
mem: support for gpu-style RMWs in ruby
This patch adds support for GPU-style read-modify-write (RMW) operations in
ruby. Such atomic operations are traditionally executed at the memory controller
(instead of through an L1 cache using cache-line locking).
Currently, this patch works by propogating operation functors through the memory
system.
The new Packet::setRaw() method incorrectly still contained
an htog() conversion. As a result, calls to the old set()
method (now defined as setRaw(htog(v))) underwent two htog
conversions, which breaks things when htog() is not a no-op.
Interestingly the only test that caught this was a SPARC
boot test, where an IsaFake device with a non-zero return
value was getting swapped twice resulting in a register
getting loaded with 0x100000000000000 instead of 1.
(Good reason for keeping SPARC around, perhaps?)
Some of the DPRINTFs added to the classic cache in cset 45df88079f04,
while useful to those unfamiliar with the cache code, end up being
noise when you're familiar with the code but are trying to debug tricky
protocol issues. (Particularly getting two messages from each cache
as it receives a snoop request then declares that there was no match.)
This patch introduces a CacheVerbose debug flag, and moves a subset of
the added DPRINTFs into that category, so that Cache by itself returns
to being a more succinct summary of cache activity.
Also added a CacheAll compound flag to turn on all the cache-related
debug flags (other than CacheTags, which you *really* have to want badly
to turn it on, IMO).
This patch removes the NeedsWritable flag for all responses, as it is
really only the request that needs a writable response. The response,
on the other hand, should in these cases always provide the line in a
writable state, as indicated by the hasSharers flag not being set.
When we send requests that has NeedsWritable set, the response will
always have the hasSharers flag not set. Additionally, there are cases
where the request did not have NeedsWritable set, and we still get a
writable response with the hasSharers flag not set. This never happens
on snoops, but is used by downstream caches to pass ownership
upstream.
As part of this patch, the affected response types are updated, and
the snoop filter is similarly modified to check only the hasSharers
flag (as it should). A sanity check is also added to the packet class,
asserting that we never look at the NeedsWritable flag for responses.
No regressions are affected.
This patch looks at the request and response command to determine if
either actually has any data payload, and if not, we do not allocate
any space for packet data.
The only tricky case is where the command type is changed as part of
the MSHR functionality. In these cases where the original packet had
no data, but the new packet does, we need to explicitly call
allocate().
