The SymbolTable class currently assumes that at most one symbol can
point to a given address. If multiple symbols point to the same
address, only the first one gets added to the internal symbol table
since there is already a match in the address table.
This changeset converts the address table from a map into a multimap
to be able to handle cases where an address maps to multiple
symbols. Additionally, the insert method is changed to not fail if
there is a match in the address table.
Change-Id: I6b4f1d5560c21e49a4af33220efb2a8302961768
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
There is a mismatch between DataType and SrcDataType in constructing
Atomic ST instruction. The mismatch causes atomic_store and
atomic_store_explicit function to store incorrect value in memory.
Eliminate the VSZ constant that defined the Wavefront size (in numbers of work
items); replaced it with a parameter in the GPU.py configuration script.
Changed all data structures dependent on the Wavefront size to be dynamically
sized. Legal values of Wavefront size are 16, 32, 64 for now and checked at
initialization time.
This patch fixes the order that packets gets pushed into the output fifo
of etherswitch. If two packets arrive at the same tick to the etherswitch,
we sort and push them based on their source port id.
In dist-gem5 simulations, if there is no ordering inforced while two
packets arrive at the same tick, it can lead to non-deterministic simulations
Committed by Jason Lowe-Power <power.jg@gmail.com>
mathexpr.hh uses std::function<> but was not including the appropriate
header, which resulted in an error
build/ARM/sim/mathexpr.hh:51:18: error: 'function' in namespace 'std'
does not name a template type
typedef std::function<double(std::string)> EvalCallback;
This commit adds the missing include.
Change-Id: I6c01d77d4354c6de838538f137a38f75f9866166
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
A lot of objects seem to request no-op power transitions which
currently results in large amounts of warnings. These warnings are
benign and risk hiding more serious warnings. Make the warning a
warn_once to prevent console flooding.
Change-Id: I86c74b4224b167f14469250ef86ab69fde7a227e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
This patch makes thermal models use the power figures
calculated by power models. Since there is a circular
dependency between power and thermal (and thermal was
pushed before) this patch closes that loop.
Change-Id: I8bd5acf6a5026fdbbcfac47e33d27397f24a6f7d
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
This patch adds some basic support for power models in gem5.
The power interface is defined so it can interact with thermal
models as well. It implements a simple power evaluator that
can be used for simple power models that express power in the
form of a math expression. These expressions can use stats
within the same SimObject (or down its hierarchy) and some
magic variables such as "temp" for temperature.
In future patches we will extend this functionality to allow
slightly more complex expressions.
The model allows it to be extended to use other kinds of models.
Change-Id: I76752f9638b6815e229fd74cdcb7721a305cbc4b
Add functionality to the BaseCPU that will put the entire CPU
into a low-power idle state whenever all threads in it are idle.
Change-Id: I984d1656eb0a4863c87ceacd773d2d10de5cfd2b
The power stats are currently very noisy even if no power model has
been loaded. Silence stats that are either zero or nan.
Change-Id: I7d0220c2fcf01131084a219228f140cfaddaf95b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Add 4 power states to the ClockedObject, provides necessary access
functions to check and update the power state. Default power state
is UNDEFINED, it is responsibility of the respective simulation
model to provide the startup state and any other logic for state
change. Add number of transition stat. Add distribution of time
spent in clock gated state. Add power state residency stat. Add
dump call back function to allow stats update of distribution
and residency stats.
Change-Id: Id086090a2ed720c9fcb37812a3c98f0f724907c6
Fixing an issue with regStats not calling the parent class method
for most SimObjects in Gem5. This causes issues if one adds new
stats in the base class (since they are never initialized properly!).
Change-Id: Iebc5aa66f58816ef4295dc8e48a357558d76a77c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
We want to extend the stats of objects hierarchically and thus it is necessary
to register the statistics of the base-class(es), as well. For now, these are
empty, but generic stats will be added there.
Patch originally provided by Akash Bagdia at ARM Ltd.
This implements SwapReq for Ruby memory.
A SwapReq should be treated like a write, except that the response
packet contains the overwritten data.
Note that, in particular, the conditional checking for isStore/isLoad
needs to be reversed, as a SwapReq is both.
In particular, when EL0 is in AArch32 but EL1 is AArch64, AArch64
memory translation must be used. This is essential for typical
AArch64/32 interworking use cases.
The ERET instruction doesn't set PSTATE correctly in some cases
(particularly when returning to aarch32 code). Among other things,
this breaks EL0 thumb code when using a 64-bit kernel. This changeset
updates the ERET implementation to match the ARM ARM.
Change-Id: I408e7c69a23cce437859313dfe84e68744b07c98
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
The current implementation of aarch32 FP/SIMD in gem5 assumes that EL1
and higher are all 32-bit. This breaks interprocessing since an
aarch64 EL1 uses different enable/disable bits. This change updates
the permission checks to according to what is prescribed by the ARM
ARM.
Change-Id: Icdcef31b00644cfeebec00216b3993aa1de12b88
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
LPAE has been tested with Linux 4.4 and seems to work just fine. Let's
enable it by default.
Change-Id: Id88c6e3c91ae9c353279d42f2aa1f8a78485bd32
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabor Dozsa <gabor.dozsa@arm.com>
According to the ARM ARM (see AArch32.TranslateAddress in the
pseudocode library), the TLB should be operating in aarch64 mode if
the EL0 is aarch32 and EL1 is aarch64. This is currently not the case
in gem5, which breaks 64/32 interprocessing. Update the check to match
the reference manual.
Change-Id: I6f1444d57c0e2eb5f8880f513f33a9197b7cb2ce
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
After reaching consensus on the mailing list, this patch officially
makes gcc 4.8 the minimum.
A few checks in the SConstruct are cleaned up as a result. This patch
also adds "-fno-omit-frame-pointer" when using ASAN (which is part of
the gcc/clang recommended flags).
We currently check the current state instead of the state of the
target EL when determining how we report a fault. This breaks
interprocessing since EL0 in aarch32 would report its fault status
using the aarch32 registers even if EL1 is in aarch64. Fix this to
report the fault using the format of the target EL.
Change-Id: Ic080267ac210783d1e01c722a4ddaa687dce280e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Mitch Hayenga <mitch.hayenga@arm.com>
The TLB currently assumes that the pxn bit in an LPAE page descriptor
disables execution from unprivileged mode. However, according to the
architecture manual, this bit should disable execution from privileged
modes. Update the TLB implementation to reflect this behavior.
Change-Id: I7f1bb232d7a94a93fd601a9230223195ac952947
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
A lot of code assumes that it is possible to test what the highest EL
is and if it is 64 bit. These calls currently don't work in SE mode
since they rely on an instance of an ArmSystem.
Change-Id: I0d1f261926a66ce3dc4fa116845ffb2a081446f2
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
This patch fixes a memory leak where deferred snoop packets never got
deallocated. On the call to MSHR::handleSnoop these snoops were
treated as if a response will be sent, as the MSHR was
pendingModified. Consequently, a copy of the packet was created and
added to the MSHR targets. However, an preceeding target to the same
MSHR, originally from a CPU, was serviced before the snoop, and caused
the block to be invalidated. This happens for ReadExReq and
UpgradeReq.
Note that the original snoop will receive a response, just not from
the cache in question, but instead from the cache upstream that issued
the ReadExReq or UpgradeReq.
Change-Id: I4ac012fbc8a46cf693ca390fe9476105d444e6f4
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Make it possible to disable gem5 gic extensions by setting the
gem5_extensions param to False from Python.
Change-Id: Icb255105925ef49891d69cc9fe5cc55578ca066d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Geoffrey Blake <geoffrey.blake@arm.com>
This patch adds a progress check to the TrafficGen so that it is
easier to detect deadlock scenarios where the generator gets stuck
waiting for a retry, and makes no further progress.
Change-Id: Ifb8779ad0939f52c0518d0e867bac73f99b82e2b
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
This patch changes the flow control for HSHR::handleSnoop to ensure
that we only set cacheResponding on the snoop packet if we are
actually responding. This avoids situations where a responder is
stalling indefinitely on a response that never arrives.
Change-Id: I691dd01755b614b30203581aa74fc743b350eacc
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This patch fixes the type of the unique_ptr instances, to ensure that
the data that is allocated with new[] is also deleted with
delete[]. The issue was highlighted by ASAN.
Change-Id: I2c5510424959d862a9954d83e728d901bb18d309
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com>
This patch fixes an issue identified by ASAN where the Neon64Load
operation assumes the packet always contains 16 bytes.
Change-Id: If24a7e461d60cb80970dfbe61d923d7d56926698
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
As identified by clang-3.8, there was a superfluous loop increment in
the flash device which is now removed.
Change-Id: If46a1c4f72d3d4c9f219124030894ca433c790af
Reviewed-by: Rene De Jong <rene.dejong@arm.com>
According to the Intel Multi Processor Specification rev 1.4 (-006) (*),
section 4.3.2 Bus Entries, Bus type strings are >>6-character ASCII
(blank-filled) strings<<.
This patch properly pads the entries with the missing spaces at the end.
(*) http://www.intel.com/design/pentium/datashts/24201606.pdf
Committed by Jason Lowe-Power <power.jg@gmail.com>
Given we do not simulate a FIFO currently there are only two states
we can be in upon read: empty or full. Properly signal the latter.
Add and sort constants for states in the header file.
Committed by Jason Lowe-Power <power.jg@gmail.com>
Registers are 0x10 and not 0x8 apart. The latter leads to invalid
calculations of index in array which in turn means that we will not
find the interrupt we were looking (been notified) for in the OS.
Committed by Jason Lowe-Power <power.jg@gmail.com>
VirtIO spec < 1.0 demands IOREG to be used on PCI and not memory mapped.
Set the correct bit on the PCI address accordingly.
Committed by Jason Lowe-Power <power.jg@gmail.com>
the n_reg field in the GPUDynInst is not currently set in the constructor.
if it is not set externally, there are assertion failures that may occur
if the random value it gets is just right. here we set it to 0 by default.
The GICv2 has a new and slightly more consistent register
naming. Update gem5's GIC register names to match the new
documentation.
Change-Id: I8ef114eee8a95bf0b88b37c18a18e137be78675a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
The LinuxArmSystem class normally provides support for panicing gem5
if the simulated kernel panics. When this is turned off (default),
gem5 uses a BreakPCEvent to provide a debugger hook into the simulator
when the kernel crashes. This hook unconditionally kills gem5 with a
SIGTRAP unless gem5 is compiled in fast mode. This is undesirable
since the panic_on_panic param already provides similar functionality.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Add support for overriding the number of interrupt lines in the ARM
KvmGic.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Factor out the kernel device wrapper from the KvmGIC and put it in a
separate class. This will simplify a future kernel/gem5 hybrid GIC.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
The Terminal device currently uses the peek functionality in gem5's
circular buffer implementation to send existing buffered content on
the terminal when a new client attaches. This functionallity is
however not implemented correctly and re-sends the same block multiple
time.
Add the required functionality to peek with an offset into the
circular buffer and change the Terminal::accept() implementation to
send the buffered contents.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>