Commit graph

21 commits

Author SHA1 Message Date
Nathan Binkert fa4c3d74fe Get rid of the ConsoleListener SimObject and just fold the
relevant code directly into the SimConsole object.  Now,
you can easily turn off the listen port by just specifying
0 as the port.

--HG--
extra : convert_revision : c8937fa45b429d8a0728e6c720a599e38972aaf0
2007-02-21 22:14:11 -08:00
Ali Saidi 7933aade85 add memory mapped disk device
configs/common/FSConfig.py:
src/python/m5/objects/T1000.py:
    add configuration for memory mapped disk
src/dev/sparc/SConscript:
    add memory mapped disk to sconscript

--HG--
extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
2007-01-09 22:16:49 -05:00
Ali Saidi ecbb8debf6 Many more fixes for SPARC_FS. Gets us to the point where SOFTINT starts
getting touched.

configs/common/FSConfig.py:
    Physical memory on the T1 starts at 1MB, The first megabyte is unmapped to catch bugs
src/arch/isa_parser.py:
    we should readmiscregwitheffect not readmiscreg
src/arch/sparc/asi.cc:
    Fix AsiIsNucleus spelling with respect to header file
    Add ASI_LSU_CONTROL_REG to AsiSiMmu
src/arch/sparc/asi.hh:
    Fix spelling of two ASIs
src/arch/sparc/isa/decoder.isa:
    switch back to defaults letting the isa_parser insert readMiscRegWithEffect
src/arch/sparc/isa/formats/mem/util.isa:
    Flesh out priviledgedString with hypervisor checks
    Make load alternate set the flags correctly
src/arch/sparc/miscregfile.cc:
    insert some forgotten break statements
src/arch/sparc/miscregfile.hh:
    Add some comments to make it easier to find which misc register is which number
src/arch/sparc/tlb.cc:
    flesh out the tlb memory mapped registers a lot more
src/base/traceflags.py:
    add an IPR traceflag
src/mem/request.hh:
    Fix a bad assert() in request

--HG--
extra : convert_revision : 1e11aa004e8f42c156e224c1d30d49479ebeed28
2006-12-06 14:29:10 -05:00
Ali Saidi 92c5a5c8cb More changes to get SPARC fs closer. Now at 1.2M cycles before difference
configs/common/FSConfig.py:
    seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
    change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
    For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
    Use instruction count from cpu rather than cycles because that is what legion does
    we can change it back after were done with legion
src/base/bitfield.hh:
    add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
    add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
    compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
    change asserts of packet success to if panics wrapped with NDEBUG defines
    so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
    expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
    convert some tabs to spaces
src/python/m5/objects/T1000.py:
    add more fake devices for each l1 bank and each memory controller

--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
2006-12-04 00:54:40 -05:00
Ali Saidi 8c4f7a0404 Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it

configs/common/FSConfig.py:
    We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
    Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
    Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
    Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
    fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
    Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
    Let kernel be none
src/sim/system.cc:
    Let the system kernel be none, but warn about it

--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
2006-11-30 15:51:54 -05:00
Gabe Black f85082e0a0 Added a parameter to set memory to zero. This is to support Legion, and once we can make our own hypervisor binary, we probably won't need it.
--HG--
extra : convert_revision : 168883e4a5d3760962cd9759a6f41c66f5a6402a
2006-11-22 23:09:27 -05:00
Gabe Black cd2727694d Add in rom/rams for the nvram, hypervisor description, and partition description.
--HG--
extra : convert_revision : a49de5fcfbea307c971964b8a68b95eb5d9a2bf4
2006-11-20 17:59:35 -05:00
Gabe Black cd5b33b9ff Fixes for SPARC_FS
configs/common/FSConfig.py:
    Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
    Create a T1000 platform
src/arch/sparc/miscregfile.cc:
    Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
    Truncate an ExtMachInst to a MachInst before comparing with Legion.

--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
2006-11-16 12:34:10 -05:00
Ali Saidi cb172d0332 Get SPARC to the point that it starts running. Add ability to load the ROM bin files, cleanup lockstep printing a bit
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.

SConstruct:
    Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
    add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
    add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
    add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
    add option to try raw when nothing works
src/cpu/exetrace.cc:
    cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
    change the instruction to be 32 bits because it is
src/mem/physical.cc:
    fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
    Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
    Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
    add the ability to add Addr() together

--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
2006-11-09 18:22:46 -05:00
Lisa Hsu 697b432ba8 FSConfig.py:
Accidentally committed this last time

configs/common/FSConfig.py:
    Accidentally committed this last time

--HG--
extra : convert_revision : 32d49c17c661b57a9aa9c3b057258f6e037ba745
2006-10-30 16:55:52 -05:00
Lisa Hsu 580c8421ab se.py, fs.py:
import Caches
Simulation.py:
Fix typo - L2Cache --> L1Cache

configs/common/Simulation.py:
    Fix typo - L2Cache --> L1Cache
configs/example/fs.py:
configs/example/se.py:
    import Caches

--HG--
extra : convert_revision : 4292225b322c069665262eab7c83b5341844fba0
2006-10-30 16:51:46 -05:00
Steve Reinhardt 96737c8a9b Rename 'Machine' to 'SysConfig'.
Clean up a little.

--HG--
extra : convert_revision : db5f36776209c76a593205c46b08aa147358f33a
2006-10-17 11:08:49 -07:00
Kevin Lim 8949d813ff Clean up configs.
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
    Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
    Add in default FUPool.
src/python/m5/objects/O3CPU.py:
    Use defaults better.  Also set checker parameters, and fix up a config bug.

--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
2006-10-08 01:12:42 -04:00
Steve Reinhardt 545cbec5f7 Enable proxies (Self/Parent) for specifying ports.
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().

src/python/m5/multidict.py:
    Make get() return None by default, to match semantics
    of built-in dictionary objects.

--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
2006-09-05 22:04:34 -07:00
Ali Saidi 76ab1c466c add etherdump file option
--HG--
extra : convert_revision : 6b62398778208bc4e64582e06fb73b71a94f3014
2006-08-16 22:17:23 -04:00
Steve Reinhardt bd4ccd6e39 Finish test clean-up & reorg.
configs/common/FSConfig.py:
    Add default Machine() param
configs/example/fs.py:
configs/example/se.py:
    make it work again
src/python/m5/objects/BaseCPU.py:
    Make mem PhysicalMemory so that a Parent.any proxy works well
src/sim/process.cc:
    Increase default stack size so we don't get an
    'increasing stack' message on 'hello world'
tests/SConscript:
    Add full list of current configs.
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
    don't need SEConfig anymore
tests/quick/00.hello/test.py:
tests/quick/20.eio-short/test.py:
    fix
tests/run.py:
    move configs to separate dir

--HG--
rename : configs/test/fs.py => configs/example/fs.py
rename : configs/test/test.py => configs/example/se.py
rename : tests/simple-atomic.py => tests/configs/simple-atomic.py
rename : tests/simple-timing.py => tests/configs/simple-timing.py
rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out
rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr
rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout
rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini
rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out
rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console
rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt
rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr
rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout
rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out
rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr
rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout
rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello
rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello
extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
2006-08-16 14:42:44 -04:00
Steve Reinhardt 2552e68eb6 More restructuring of regression tests.
Moving work back to zizzer...

configs/common/FSConfig.py:
configs/test/fs.py:
    Move CPU connections out of makeLinuxAlphaSystem()
src/python/m5/objects/BaseCPU.py:
    Create default TLBs in full system.
    Move utility cache functions here.
src/python/m5/objects/O3CPU.py:
    Add _mem_ports
tests/run.py:
    Add binpath()
    Change maxtick default to 'forever'
tests/simple-atomic.py:
    Use connectmemPorts()
tests/simple-timing.py:
    Fix up.

--HG--
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.ini => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.ini
rename : tests/quick/eio1/ref/alpha/eio/detailed/config.out => tests/quick/20.eio-short/ref/alpha/eio/detailed/config.out
rename : tests/quick/eio1/ref/alpha/eio/detailed/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/detailed/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/detailed/stderr => tests/quick/20.eio-short/ref/alpha/eio/detailed/stderr
rename : tests/quick/eio1/ref/alpha/eio/detailed/stdout => tests/quick/20.eio-short/ref/alpha/eio/detailed/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-atomic/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-atomic/stdout
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.ini => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.ini
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/config.out => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/config.out
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/m5stats.txt => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/m5stats.txt
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stderr => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stderr
rename : tests/quick/eio1/ref/alpha/eio/simple-timing/stdout => tests/quick/20.eio-short/ref/alpha/eio/simple-timing/stdout
rename : tests/quick/eio1/test.py => tests/quick/20.eio-short/test.py
rename : configs/test/hello => tests/test-progs/hello/bin/alpha/linux/hello
rename : configs/test/hello_mips => tests/test-progs/hello/bin/mips/linux/hello_mips
rename : configs/test/sparc_tests/hello_sparc => tests/test-progs/hello/bin/sparc/bin
extra : convert_revision : 1f891392ecc11ffcc3b3182fa673c401c0efc8a5
2006-08-16 09:52:05 -07:00
Ali Saidi de29f555c4 implement benchmark selection code
--HG--
extra : convert_revision : 84632fdad7019e177e61c56ae30ea2f3fdbc0995
2006-08-15 19:12:19 -04:00
Kevin Lim 08c0919b43 Clean up some more config stuff.
configs/common/FSConfig.py:
    Clean up some code to make functions look less like classes.  Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
    Update for changed code.
src/python/m5/__init__.py:
    Put makeList into m5.

--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
2006-07-27 17:49:00 -04:00
Kevin Lim 7ccdb7accc Last minute check in. Very few functional changes other than some minor config updates. Also include some recently generated stats.
SConstruct:
    Make test CPUs option non-sticky.
configs/common/FSConfig.py:
    Be sure to set the memory mode.
configs/test/fs.py:
    Wrong string.
tests/SConscript:
    Only test valid CPUs that have been compiled in.
tests/test1/ref/alpha/atomic/config.ini:
tests/test1/ref/alpha/atomic/config.out:
tests/test1/ref/alpha/atomic/m5stats.txt:
tests/test1/ref/alpha/atomic/stdout:
tests/test1/ref/alpha/detailed/config.ini:
tests/test1/ref/alpha/detailed/config.out:
tests/test1/ref/alpha/detailed/m5stats.txt:
tests/test1/ref/alpha/detailed/stdout:
tests/test1/ref/alpha/timing/config.ini:
tests/test1/ref/alpha/timing/config.out:
tests/test1/ref/alpha/timing/m5stats.txt:
tests/test1/ref/alpha/timing/stdout:
    Update output.

--HG--
extra : convert_revision : 6eee2a5eae0291b5121b41bcd7021179cdd520a3
2006-07-22 15:50:39 -04:00
Kevin Lim a6c2e5cca0 Rearrange the FS configs to be more shared. Also check in the full-system tests. Reference stats coming soon.
configs/test/fs.py:
    Pull out a lot of common code and put it into configs/common/FSConfig.py.

--HG--
extra : convert_revision : 175b18d75f82ddecbcc9a6418fe40df314db55d5
2006-07-21 15:56:35 -04:00