configs/common/FSConfig.py:
src/python/m5/objects/T1000.py:
add configuration for memory mapped disk
src/dev/sparc/SConscript:
add memory mapped disk to sconscript
--HG--
extra : convert_revision : d8df4a455cf48000042d0ff93a274985f4dbe905
formats for time (strings, datetime objects, etc.)
Advance system time to 1/1/2009
Clean up time management code a little bit
--HG--
extra : convert_revision : 28ebecc7ea6b12f4345c77a9a6b4bdf2e752c4f8
Make our replacement algorithm same as legion (although not same as the spec)
itb should be 64 entries not 48
src/arch/sparc/tlb.cc:
Bug fixes in the TLB
Make our replacement algorithm same as legion (although not same as the spec)
src/arch/sparc/tlb.hh:
Make our replacement algorithm same as legion (although not same as the spec)
src/python/m5/objects/SparcTLB.py:
itb should be 64 entries too
--HG--
extra : convert_revision : 1b5cb3597091e3cfe293e94f6f2219b1e621c35f
src/arch/sparc/asi.cc:
src/arch/sparc/asi.hh:
add sparc error asi
src/arch/sparc/faults.cc:
put a panic in if TL == MaxTL
src/arch/sparc/isa/decoder.isa:
Hpstate needs to be updated on a done too
src/arch/sparc/miscregfile.cc:
warn istead of panicing of fprs/fsr accesses
src/arch/sparc/tlb.cc:
add sparc error register code that just does nothing
fix a couple of other tlb bugs
src/arch/sparc/ua2005.cc:
fix implementation of HPSTATE write
src/cpu/exetrace.cc:
let exectrate mess up a couple of times before dying
src/python/m5/objects/T1000.py:
add l2 error status register fake devices
--HG--
extra : convert_revision : ed5dfdfb28633bf36e5ae07d244f7510a02874ca
configs/common/FSConfig.py:
seperate the hypervisor memory and the guest0 memory. In reality we're going to need a better way to do this at some point. Perhaps auto generating the hv-desc image based on the specified config.
src/arch/sparc/isa/decoder.isa:
change reads/writes to the [hs]tick(cmpr) registers to use readmiscregwitheffect
src/arch/sparc/miscregfile.cc:
For niagra stick and tick are aliased to one value (if we end up doing mps we might not want this).
Use instruction count from cpu rather than cycles because that is what legion does
we can change it back after were done with legion
src/base/bitfield.hh:
add a new function mbits() that just masks off bits of interest but doesn't shift
src/cpu/base.cc:
src/cpu/base.hh:
add instruction count to cpu
src/cpu/exetrace.cc:
src/cpu/m5legion_interface.h:
compare instruction count between legion and m5 too
src/cpu/simple/atomic.cc:
change asserts of packet success to if panics wrapped with NDEBUG defines
so we can get some more useful information when we have a bad address
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
src/python/m5/objects/Device.py:
expand isa fake a bit more having data for each size request, the ability to have writes update the data and to warn on accesses
src/python/m5/objects/System.py:
convert some tabs to spaces
src/python/m5/objects/T1000.py:
add more fake devices for each l1 bank and each memory controller
--HG--
extra : convert_revision : 8024ae07b765a04ff6f600e5875b55d8a7d3d276
Add the ability to use an address mask for symbol loading
Rather then silently failing on platform accesses panic
Move BadAddr/IsaFake no Device from Tsunami
Let the system kernel be none, but warn about it
configs/common/FSConfig.py:
We don't have a kernel for sparc yet
src/arch/sparc/system.cc:
Load the hypervisor symbols twice, once with an address mask so that we can get symbols for where it's copied to in memory
src/base/loader/aout_object.cc:
src/base/loader/aout_object.hh:
src/base/loader/ecoff_object.cc:
src/base/loader/ecoff_object.hh:
src/base/loader/elf_object.cc:
src/base/loader/elf_object.hh:
src/base/loader/object_file.hh:
src/base/loader/raw_object.cc:
src/base/loader/raw_object.hh:
Add the ability to use an address mask for symbol loading
src/dev/sparc/t1000.cc:
Rather then silently failing on platform accesses panic
src/dev/sparc/t1000.hh:
fix up a couple of platform comments
src/python/m5/objects/Bus.py:
src/python/m5/objects/Device.py:
src/python/m5/objects/T1000.py:
src/python/m5/objects/Tsunami.py:
Move BadAddr/IsaFake no Device from Tsunami
src/python/m5/objects/System.py:
Let kernel be none
src/sim/system.cc:
Let the system kernel be none, but warn about it
--HG--
extra : convert_revision : 92f6afef599a3d3c7c5026d03434102c41c7b5f4
configs/common/FSConfig.py:
Make a SPARC system create an IO bus.
src/python/m5/objects/T1000.py:
Create a T1000 platform
src/arch/sparc/miscregfile.cc:
Initialize the strand status register to the value legion provides.
src/cpu/exetrace.cc:
Truncate an ExtMachInst to a MachInst before comparing with Legion.
--HG--
extra : convert_revision : e4189b572a5297e8362f5bd26d87b74736c8e5f1
Since we don't have a platform yet, you need to comment out the default responder stuff in Bus.py to make it work.
SConstruct:
Add TARGET_ISA to the list of environment variables that end up in the build_env for python
configs/common/FSConfig.py:
add a simple SPARC system to being testing with, you'll need to change makeLinuxAlphaSystem to makeSparcSystem in fs.py for now
src/SConscript:
add a raw file object, at least until we get more info about how to compile openboot properly
src/arch/sparc/system.cc:
src/arch/sparc/system.hh:
add parameters for ROM files (OBP/Reset/Hypervisor), a ROM, load files into ROM
src/base/loader/object_file.cc:
src/base/loader/object_file.hh:
add option to try raw when nothing works
src/cpu/exetrace.cc:
cleanup lockstep printing a little bit
src/cpu/m5legion_interface.h:
change the instruction to be 32 bits because it is
src/mem/physical.cc:
fix assert that doesn't work if memory starts somewhere above 0
src/python/m5/objects/BaseCPU.py:
Add if statement to choose between sparc tlbs and alpha tlbs
src/python/m5/objects/System.py:
Add a sparc system that sets the rom addresses correctly
src/python/m5/params.py:
add the ability to add Addr() together
--HG--
extra : convert_revision : bbbd8a56134f2dda2728091f740e2f7119b0c4af
configs/common/Simulation.py:
simplify maxtick code a little bit - instead of checking for -1, just set it at MaxTick.
src/python/m5/__init__.py:
make a new m5 param called MaxTick.
src/sim/host.hh:
fix the M5 def. of MaxTick
src/sim/main.cc:
Simplify the MaxTick/num_cycles parsing within main.cc
--HG--
extra : convert_revision : f800addfbc1323591c2e05b892276b439b671668
src/python/m5/objects/BaseCPU.py:
These parameters should have been removed in an earlier push.
--HG--
extra : convert_revision : 781b39ca370361e9568b1af0be96ff5848b1f3f4
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
No need for specialized init() function any more.
src/python/m5/objects/Tsunami.py:
Override responder when set by user. This avoids having bus.responder floating around and not doing anything when the user has specified their own default responder.
--HG--
extra : convert_revision : c547daf15b23a889c98e62bfd53c293c85d7a041
src/SConscript:
remove pcifake and tsunami fake from sconscript
src/dev/isa_fake.cc:
src/dev/isa_fake.hh:
combine badaddr and isa fake into one
src/python/m5/objects/Pci.py:
remove pcifake
src/python/m5/objects/Tsunami.py:
make badaddr derive from isafake
--HG--
extra : convert_revision : 91470db60aa1de6b85827304e27bd3414cc9d8d1
src/mem/bus.cc:
src/mem/bus.hh:
Bus now will be setup with a default responder, unless the user overrides it. This default responder should return BadAddress if no matching port is found.
src/python/m5/objects/Bus.py:
Bus now has a default responder for FS mode if the user doesn't override it. It returns BadAddress if no matching port is found.
src/python/m5/objects/Tsunami.py:
Add bad address device. Also record when the user has specified their own default responder.
--HG--
extra : convert_revision : 59070477ae313ee711b2d59baa2369c9a91c5b85
Fix fixPacket assert function.
Stop timing port from forwarding the request if a response was found in its queue on a read.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/python/m5/objects/MemTest.py:
Add parameter to configure what percentage of mem accesses are functional
src/mem/cache/base_cache.cc:
src/mem/cache/cache_impl.hh:
Use fix Packet function
src/mem/packet.cc:
Fix an assert that was checking the wrong thing
src/mem/tport.cc:
Properly detect if we need to do the access to the functional device
--HG--
extra : convert_revision : 447cc1a9a65ddd2a41e937fb09dc0e7c74e9c75e
src/python/m5/SimObject.py:
how did i not commit this already? the other way doesn't seem to work.
--HG--
extra : convert_revision : 55737d3d10742a1913a376d1febbc5809f2fab8f
configs/example/fs.py:
Add flag for MP server systems.
src/python/m5/objects/AlphaConsole.py:
src/python/m5/objects/IntrControl.py:
Change CPU from 'any' to 'cpu[0]' to work better with MP sytems.
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-timing-dual.py:
Don't need to set console & intrcontrol cpu
params anymore (default is fixed now).
--HG--
extra : convert_revision : 9417b12b1b395ff7d6a9f2894e4123923c754daf
into zed.eecs.umich.edu:/z/hsul/work/m5/newmem
src/cpu/simple/timing.cc:
hand merge
--HG--
extra : convert_revision : 083bf102249ad9bc63c447dbf85d3863f935f647
src/python/m5/SimObject.py:
now that setMemoryMode is a method in System, need to convert the SimObject * _ccObject into a system ptr to call setMemoryMode.
src/sim/main.cc:
need this conversion now.
src/sim/sim_object.hh:
put the enum back into SimObject.
src/sim/system.hh:
memoryMode is now a part of SimObject, need the ::'s
--HG--
extra : convert_revision : 0ade06957fa57b497798e1f50c237ca1badc821d
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Make Memtester able to test atomic as well
src/mem/bus.cc:
src/mem/bus.hh:
Handle atomic snoops properly for cache->cache transfers
src/mem/cache/cache_impl.hh:
Debug output.
Clean up memleak in atomic mode.
Set hitLatency.
Still need to send back reasonable number for atomic return value.
src/mem/packet.cc:
Add command strings for new commands
src/python/m5/objects/MemTest.py:
Add param to test atomic memory.
--HG--
extra : convert_revision : 43f880e29215776167c16ea90793ebf8122c785b
into zamp.eecs.umich.edu:/z/ktlim2/clean/o3-merge/newmem
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
src/cpu/simple/timing.hh:
tests/configs/o3-timing-mp.py:
Hand merge.
--HG--
extra : convert_revision : a58cc439eb5e8f900d175ed8b5a85b6c8723e558
src/mem/physical.cc:
Update comment to match memtest use
src/python/m5/objects/PhysicalMemory.py:
Make memtester have a way to connect functionally
tests/configs/memtest.py:
Properly create 8 memtesters and connect them to the memory system
--HG--
extra : convert_revision : e5a2dd9c8918d58051b553b5c6a14785d48b34ca
src/cpu/SConscript:
Add memtester to the compilation environment.
Someone who knows this better should make the MemTest a cpu model parameter.
For now attached with the build of o3 cpu.
src/cpu/memtest/memtest.cc:
src/cpu/memtest/memtest.hh:
Update Memtest for new mem system
src/python/m5/objects/MemTest.py:
Update memtest python description
--HG--
extra : convert_revision : d6a63e08fda0975a7abfb23814a86a0caf53e482
into zeep.eecs.umich.edu:/home/gblack/m5/newmem_bus
src/mem/bus.cc:
Hand merged. Needs to be fixed
--HG--
extra : convert_revision : df03219ccfd18431cc726a063bd29d30554944a1
src/mem/bus.cc:
src/mem/bus.hh:
minor fix and some formatting changes
src/python/m5/objects/Bus.py:
changed bits to bytes
--HG--
extra : convert_revision : dcd22205604b7a2727eaf2094084c4858f3589c5
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.
src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
--HG--
extra : convert_revision : 6ce982d44924cc477e049b9adf359818908e72be
configs/common/FSConfig.py:
configs/common/SysPaths.py:
configs/example/fs.py:
configs/example/se.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
Clean up configs by removing FullO3Config and instead using default values.
src/python/m5/objects/FUPool.py:
Add in default FUPool.
src/python/m5/objects/O3CPU.py:
Use defaults better. Also set checker parameters, and fix up a config bug.
--HG--
extra : convert_revision : 5fd0c000143f4881f10a9a575c3810dc97cb290b
src/arch/alpha/isa_traits.hh:
This got changed to the wrong version by accident.
src/cpu/base.cc:
Fix up progress event to not schedule itself if the interval is set to 0.
src/cpu/base.hh:
Fix up the CPU Progress Event to not print itself if it's set to 0. Also remove stats_reset_inst (something I added to m5 but isn't necessary here).
src/cpu/base_dyn_inst.hh:
src/cpu/checker/cpu.hh:
Remove float variable of instResult; it's always held within the double part now.
src/cpu/checker/cpu_impl.hh:
Use thread and not cpuXC.
src/cpu/o3/alpha/cpu_builder.cc:
src/cpu/o3/checker_builder.cc:
src/cpu/ozone/checker_builder.cc:
src/cpu/ozone/cpu_builder.cc:
src/python/m5/objects/BaseCPU.py:
Remove stats_reset_inst.
src/cpu/o3/commit_impl.hh:
src/cpu/ozone/lw_back_end_impl.hh:
Get TC, not XCProxy.
src/cpu/o3/cpu.cc:
Switch out updates from the version of m5 I have. Also remove serialize code that got added twice.
src/cpu/o3/iew_impl.hh:
src/cpu/o3/lsq_impl.hh:
src/cpu/thread_state.hh:
Remove code that was added twice.
src/cpu/o3/lsq_unit.hh:
Add back in stats that got lost in the merge.
src/cpu/o3/lsq_unit_impl.hh:
Use proper method to get flags. Also wake CPU if we're coming back from a cache miss.
src/cpu/o3/thread_context_impl.hh:
src/cpu/o3/thread_state.hh:
Support profiling.
src/cpu/ozone/cpu.hh:
Update to use proper typename.
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/dyn_inst_impl.hh:
Updates for newmem.
src/cpu/ozone/lw_lsq_impl.hh:
Get flags correctly.
src/cpu/ozone/thread_state.hh:
Reorder constructor initialization, use tc.
src/sim/pseudo_inst.cc:
Allow for loading of symbol file. Be sure to use ThreadContext and not ExecContext.
--HG--
extra : convert_revision : c5657f84155807475ab4a1e20d944bb6f0d79d94
src/SConscript:
add intel nic to sconscript
src/dev/pcidev.cc:
fix bug with subsystemid value
src/python/m5/objects/Ethernet.py:
add intel nic to ethernet.py
src/python/m5/objects/Ide.py:
src/python/m5/objects/Pci.py:
Move config_latency into pci where it belogs
--HG--
extra : convert_revision : 7163aaf7b4098496518b0910cef62f2ce3dd574d
Includes support for printing readable VectorPort and Proxy names
(via __str__).
--HG--
extra : convert_revision : c48534a498b3036fe6ac45ff1606656546c79afb
Significant revamp of Port code.
Some cleanup of SimObject code too, particularly to
make the SimObject and MetaSimObject implementations of
__setattr__ more consistent.
Unproxy code split out of print_ini().
src/python/m5/multidict.py:
Make get() return None by default, to match semantics
of built-in dictionary objects.
--HG--
extra : convert_revision : db73b6cdd004a82a08b2402afd1e16544cb902a4
Some tweaking to deal with mutually recursive imports.
--HG--
rename : src/python/m5/config.py => src/python/m5/SimObject.py
extra : convert_revision : 166f7bfabfd20100e93d26a89382469465859988
Import of changes for auto-generation of C++ param structs
from my old m5 working directory.
This code is *broken* because pieces need to be shuffled around
to satisfy name dependencies, but that really messes up the
diff, so I want to make an intermediate commit here.
src/python/m5/config.py:
Import of changes for auto-generation of C++ param structs
from my old m5 working directory.
This code is *broken* because pieces need to be shuffled around
to satisfy name dependencies, but that really messes up the
diff, so I want to make an intermediate commit here.
--HG--
extra : convert_revision : cb25ee1f4f77d1902511ee9aa766403733dd8841
src/python/m5/objects/BaseCPU.py:
Make mem parameter a MemObject, not just a PhysicalMemory
Fix a reference not using self
tests/configs/simple-atomic.py:
Set the mem paramter
tests/configs/simple-timing.py:
Set the mem parameter
--HG--
extra : convert_revision : 6bd9df36831a1c5bafc9e88ab945c2ebe91db785
Kinda port DRAM to new memory system. The code is *really* ugly (not my fault) and right now something about the stats it uses
causes a simulator segfault.
src/SConscript:
Add dram.cc to sconscript
src/mem/physical.cc:
src/mem/physical.hh:
Add params struct to physical memory, use params, make latency function be virtual
src/python/m5/objects/PhysicalMemory.py:
Add DRAMMemory python class
--HG--
extra : convert_revision : 5bd9f2e071c62da89e8efa46fa016f342c01535d
src/arch/alpha/regfile.hh:
src/arch/mips/regfile/float_regfile.hh:
src/arch/mips/regfile/int_regfile.hh:
src/arch/mips/regfile/misc_regfile.hh:
src/cpu/exetrace.hh:
Added functions to start to support dumping register values once per cycle.
src/cpu/exetrace.cc:
Added some code to support printing the value of registers after each cycle.
src/python/m5/main.py:
Options to turn on output after every instruction. They are commented out.
--HG--
extra : convert_revision : 168a48a6b98ab6be412a96bdee831c71906958b0
configs/common/FSConfig.py:
Clean up some code to make functions look less like classes. Also put makeList function (formerly listWrapper) into m5 itself.
configs/test/fs.py:
Update for changed code.
src/python/m5/__init__.py:
Put makeList into m5.
--HG--
extra : convert_revision : 731806a7486f9abf986f52926126df666b024b1d
into zamp.eecs.umich.edu:/z/ktlim2/clean/newmem-merge
configs/test/fs.py:
Hand merge.
--HG--
extra : convert_revision : 78f7c46084f66d52ddfe0386fd7c08de8017331e
SConstruct:
Include an option to specify the CPUs being tested.
src/cpu/SConscript:
Checker isn't SMT right now, so don't do SMT tests with the O3CPU if we're using the checker.
src/python/m5/objects/O3CPU.py:
Include default options. Unfortunately FullO3Config.py is still needed because it specifies which FUPool is being used.
tests/SConscript:
Several minor updates (sorry for one commit). Updated the copyright and fixed some m5 style issues. Also added the ability to specify which CPUs to run the tests on.
--HG--
extra : convert_revision : b0b801115705544ea02e572e31314f7bb8b5f0f2
src/python/m5/objects/Device.py:
src/python/m5/objects/Pci.py:
Change the default here to a latency rather than a Tick
--HG--
extra : convert_revision : b9366dd89646cea27a836baf249ac2da38c1809f
src/cpu/checker/cpu.hh:
Don't count checker's instructions towards total instructions committed.
src/python/m5/objects/Root.py:
Set default clock to 1 THz.
--HG--
extra : convert_revision : 0b5eaa197c860c361a3b00087e45ddc249ff1918
src/python/m5/config.py:
Formatting.
src/python/m5/main.py:
Slightly more useful output when you don't enter in a valid script file.
--HG--
extra : convert_revision : 5a71a6c94dbedeb000f83f57b0b575c2df924509
update scripts acordingly
configs/test/SysPaths.py:
new syspaths from nate, this one allows you to set script, binary, and disk paths like
system.dir = 'aouaou' in your script
configs/test/fs.py:
update for system mem_mode
Put small checkpoint example
Make clock 1THz
configs/test/test.py:
src/arch/alpha/freebsd/system.cc:
src/arch/alpha/linux/system.cc:
src/arch/alpha/system.cc:
src/arch/alpha/tru64/system.cc:
src/arch/sparc/system.cc:
src/python/m5/objects/System.py:
src/sim/system.cc:
src/sim/system.hh:
update for system mem_mode
src/dev/io_device.cc:
Use time returned from sendAtomic to delay
--HG--
extra : convert_revision : 67eedb3c84ab2584613faf88a534e793926fc92f
States are now running, draining, or drained. memory state information moved into system object
system parameter is not fs only for cpus
Implement drain() support in devices
Update for drain() call that returns number of times drain_event->process() will be called
Break O3 CPU! No sense in putting in a hack change that kevin is going to remove in a few minutes i imagine
src/cpu/simple/atomic.cc:
src/cpu/simple/atomic.hh:
Since se mode has a system, allow access to it
Verify that the atomic cpu is connected to an atomic system on resume
src/cpu/simple/base.cc:
Since se mode has a system, allow access to it
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
Update for new drain() call that returns number of times drain_event->process() will be called and memory state being moved into the system
Since se mode has a system, allow access to it
Verify that the timing cpu is connected to an timing system on resume
src/dev/ide_disk.cc:
src/dev/io_device.cc:
src/dev/io_device.hh:
src/dev/ns_gige.cc:
src/dev/ns_gige.hh:
src/dev/pcidev.cc:
src/dev/pcidev.hh:
src/dev/sinic.cc:
src/dev/sinic.hh:
Implement drain() support in devices
src/python/m5/config.py:
Allow drain to return number of times drain_event->process() will be called. Normally 0 or 1 but things like O3 cpu or devices with multiple ports may want to call it many times
src/python/m5/objects/BaseCPU.py:
move system parameter out of fs to everyone
src/sim/sim_object.cc:
src/sim/sim_object.hh:
States are now running, draining, or drained. memory state information moved into system object
src/sim/system.cc:
src/sim/system.hh:
memory mode information now contained in system object
--HG--
extra : convert_revision : 1389c77e66ee6d9710bf77b4306fb47e107b21cf
