Port proxies are used to replace non-structural ports, and thus enable
all ports in the system to correspond to a structural entity. This has
the advantage of accessing memory through the normal memory subsystem
and thus allowing any constellation of distributed memories, address
maps, etc. Most accesses are done through the "system port" that is
used for loading binaries, debugging etc. For the entities that belong
to the CPU, e.g. threads and thread contexts, they wrap the CPU data
port in a port proxy.
The following replacements are made:
FunctionalPort > PortProxy
TranslatingPort > SETranslatingPortProxy
VirtualPort > FSTranslatingPortProxy
--HG--
rename : src/mem/vport.cc => src/mem/fs_translating_port_proxy.cc
rename : src/mem/vport.hh => src/mem/fs_translating_port_proxy.hh
rename : src/mem/translating_port.cc => src/mem/se_translating_port_proxy.cc
rename : src/mem/translating_port.hh => src/mem/se_translating_port_proxy.hh
There are two lines in O3CPU.py that set the dcache and icache
tgts_per_mshr to 20, ignoring any pre-configured value of tgts_per_mshr.
This patch removes these hardcoded lines from O3CPU.py and sets the default
L1 cache mshr targets to 20.
--HG--
extra : rebase_source : 6f92d950e90496a3102967442814e97dc84db08b
This patch updates reference statistics for the regression tests. This
update was necessitated by a recent change in behavior of some instructions
in the x86 architecture.
This patch replaces RUBY with PROTOCOL in all the SConscript files as
the environment variable that decides whether or not certain components
of the simulator are compiled.
This patch drops RUBY as a compile time option. Instead the PROTOCOL option
is used to figure out whether or not to build Ruby. If the specified protocol
is 'None', then Ruby is not compiled.
This patch updates the regression outputs for Ruby memtest. This was
required because of the changes carried out by the addition of functional
access support to Ruby.
This patch rpovides functional access support in Ruby. Currently only
the M5Port of RubyPort supports functional accesses. The support for
functional through the PioPort will be added as a separate patch.
A few prior changesets have changed the gem5 output in a way that wont cause
errors but may be confusing for someone trying to debug the regressions. Ones that I caught
were:
- no more "warn: <hash address"
- typo in the ALPHA Prefetch unimplemented warning
Additionaly, the last updated stats changes rearrange the ordering of the stats output even though
they are still correct stats (gem5 is smart enough to detect this). All the regressions pass
w/the same stats even though it looks like they are being changed.
Re-enabling implicit parenting (see previous patch) causes current
Ruby config scripts to create some strange hierarchies and generate
several warnings. This patch makes three general changes to address
these issues.
1. The order of object creation in the ruby config files makes the L1
caches children of the sequencer rather than the controller; these
config ciles are rewritten to assign the L1 caches to the
controller first.
2. The assignment of the sequencer list to system.ruby.cpu_ruby_ports
causes the sequencers to be children of system.ruby, generating
warnings because they are already parented to their respective
controllers. Changing this attribute to _cpu_ruby_ports fixes this
because the leading underscore means this is now treated as a plain
Python attribute rather than a child assignment. As a result, the
configuration hierarchy changes such that, e.g.,
system.ruby.cpu_ruby_ports0 becomes system.l1_cntrl0.sequencer.
3. In the topology classes, the routers become children of some random
internal link node rather than direct children of the topology.
The topology classes are rewritten to assign the routers to the
topology object first.
This change fixes the problem for all the cases we actively use. If you want to try
more creative I/O device attachments (E.g. sharing an L2), this won't work. You
would need another level of caching between the I/O device and the cache
(which you actually need anyway with our current code to make sure writes
propagate). This is required so that you can mark the cache in between as
top level and it won't try to send ownership of a block to the I/O device.
Asserts have been added that should catch any issues.
makeArmSystem creates both bare-metal and Linux systems more cleanly.
machine_type was never optional though listed as an optional argument; a system
such as "RealView_PBX" must now be explicitly specified. Now that it is a
required argument, the placement of the arguments has changed slightly
requiring some changes to calls that create ARM systems.
previous changesets took a closer look at memory mgmt in the inorder model and sought to avoid
dynamic memory mgmt (for access to pipeline resources) as much as possible. For the regressions
that were run, the sims are about 2x speedup from changeset 7726 which is the last change
since the recent commits in Feb. (note: these regressions now are 4-issue CPUs instead of just 1-issue)
there are still only a few inorder benchmark but for the lengthier benchmarks (twolf and vortext)
the latest changes to how instruction scheduling (how instructions figure out what they want to
do on each pipeline stage in the inorder model) were able to improve performance by a nice
amount... The latest results for the inorder model process about 100k insts/second
(note: 58% is over the last time run on 64-bit pool machines at UM)
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
This patch updates the output for regression tests that are carried out on
MESI_CMP_directory protocol. The changes made to the protocol in order to
remove the bugs present result in regression failure for the 60.rubytest.
Since the earlier protocol was incorrect, so we certainly cannot relay on the
earlier reference output. Hence, the update.
Make diff-out sort stats changes by percentage
by default, with '-a' to use current alpha sort
(instead of requiring '-p' to sort by percentage).
Other minor options cleanup too.
Because the handling of the E state for multilevel caches
has changed, stats are affected for any non-ruby config
with caches, even uniprocessor simple CPU.
Orphan SimObjects (not in the config hierarchy) could get
created implicitly if they have a port connection to a SimObject
that is in the hierarchy. This means that there are objects on
the C++ SimObject list (created via the C++ SimObject
constructor call) that are unknown to Python and will get
skipped if we walk the hierarchy from the Python side (as we are
about to do). This patch detects this situation and prints an
error message.
Also fix the rubytester config script which happened to rely on
this behavior.
Enforce that the Python Root SimObject is instantiated only
once. The C++ Root object already panics if more than one is
created. This change avoids the need to track what the root
object is, since it's available from Root.getInstance() (if it
exists). It's now redundant to have the user pass the root
object to functions like instantiate(), checkpoint(), and
restoreCheckpoint(), so that arg is gone. Users who use
configs/common/Simulate.py should not notice.
Previously the return value ignored missing/added stats,
making the regressions not tell you when you needed to
update the reference stats because of these changes.
Also stop filtering distributions when reporting these;
not sure why we did that in the first place.
Also get rid of obsolete hacks for the "fetch-loss" stats
that have been gone for a long time.
On the config end, if a shared L2 is created for the system, it is
parameterized to have n sharers as defined by option.num_cpus. In addition to
making the cache sharing aware so that discriminating tag policies can make use
of context_ids to make decisions, I added an occupancy AverageStat and an occ %
stat to each cache so that you could know which contexts are occupying how much
cache on average, both in terms of blocks and percentage. Note that since
devices have context_id -1, having an array of occ stats that correspond to
each context_id will break here, so in FS mode I add an extra bucket for device
blocks. This bucket is explicitly not added in SE mode in order to not only
avoid ugliness in the stats.txt file, but to avoid broken stats (some formulas
break when a bucket is 0).
