Commit graph

14 commits

Author SHA1 Message Date
Nilay Vaish
a60a93eb05 ruby: specify number of vnets for each protocol
The default value for number of virtual networks is being removed.  Each protocol
should now specify the value it needs.
2015-08-30 12:24:18 -05:00
Joel Hestness
905c0b347c ruby: Protocol changes for SimObject MessageBuffers 2015-08-14 00:19:45 -05:00
Joel Hestness
9567c839fe ruby: Remove the RubyCache/CacheMemory latency
The RubyCache (CacheMemory) latency parameter is only used for top-level caches
instantiated for Ruby coherence protocols. However, the top-level cache hit
latency is assessed by the Sequencer as accesses flow through to the cache
hierarchy. Further, protocol state machines should be enforcing these cache hit
latencies, but RubyCaches do not expose their latency to any existng state
machines through the SLICC/C++ interface. Thus, the RubyCache latency parameter
is superfluous for all caches. This is confusing for users.

As a step toward pushing L0/L1 cache hit latency into the top-level cache
controllers, move their latencies out of the RubyCache declarations and over to
their Sequencers. Eventually, these Sequencer parameters should be exposed as
parameters to the top-level cache controllers, which should assess the latency.
NOTE: Assessing these latencies in the cache controllers will require modifying
each to eliminate instantaneous Ruby hit callbacks in transitions that finish
accesses, which is likely a large undertaking.
2015-08-14 00:19:37 -05:00
Nilay Vaish
3d782f8df7 ruby: correctly number the sequencer in MESI_Three_Level.py 2015-08-03 22:44:27 -05:00
David Hashe
1850ed410f ruby: initialize replacement policies with their own simobjs
this is in preparation for other replacement policies that take additional
parameters.
2015-07-20 09:15:18 -05:00
Malek Musleh
be3a952394 config, ruby: connect dma to network
DMA Controller was not being connected to the network for the MESI_Three_Level
protocol as was being done in the other protocol config files. Without this
patch, this protocol segfaults during startup.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-01-20 14:15:28 -06:00
Marc Orr
bf80734b2c x86 isa: This patch attempts an implementation at mwait.
Mwait works as follows:
1. A cpu monitors an address of interest (monitor instruction)
2. A cpu calls mwait - this loads the cache line into that cpu's cache.
3. The cpu goes to sleep.
4. When another processor requests write permission for the line, it is
   evicted from the sleeping cpu's cache. This eviction is forwarded to the
   sleeping cpu, which then wakes up.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-11-06 05:42:22 -06:00
Nilay Vaish
3022d463fb ruby: interface with classic memory controller
This patch is the final in the series.  The whole series and this patch in
particular were written with the aim of interfacing ruby's directory controller
with the memory controller in the classic memory system.  This is being done
since ruby's memory controller has not being kept up to date with the changes
going on in DRAMs.  Classic's memory controller is more up to date and
supports multiple different types of DRAM.  This also brings classic and
ruby ever more close.  The patch also changes ruby's memory controller to
expose the same interface.
2014-11-06 05:42:21 -06:00
Nilay Vaish
95a0b18431 ruby: single physical memory in fs mode
Both ruby and the system used to maintain memory copies.  With the changes
carried for programmed io accesses, only one single memory is required for
fs simulations.  This patch sets the copy of memory that used to reside
with the system to null, so that no space is allocated, but address checks
can still be carried out.  All the memory accesses now source and sink values
to the memory maintained by ruby.
2014-11-06 05:41:44 -06:00
Nilay Vaish
7a0d5aafe4 ruby: message buffers: significant changes
This patch is the final patch in a series of patches.  The aim of the series
is to make ruby more configurable than it was.  More specifically, the
connections between controllers are not at all possible (unless one is ready
to make significant changes to the coherence protocol).  Moreover the buffers
themselves are magically connected to the network inside the slicc code.
These connections are not part of the configuration file.

This patch makes changes so that these connections will now be made in the
python configuration files associated with the protocols.  This requires
each state machine to expose the message buffers it uses for input and output.
So, the patch makes these buffers configurable members of the machines.

The patch drops the slicc code that usd to connect these buffers to the
network.  Now these buffers are exposed to the python configuration system
as Master and Slave ports.  In the configuration files, any master port
can be connected any slave port.  The file pyobject.cc has been modified to
take care of allocating the actual message buffer.  This is inline with how
other port connections work.
2014-09-01 16:55:47 -05:00
Emilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
01f792a367 ruby: Fixes clock domains in configuration files
This patch fixes scripts related to ruby by adding the ruby clock domain.
Now the L1 controllers and  the Sequencer shares the cpu clock domain,
while the rest of the components use the ruby clock domain.

Before this patch, running simulations with the cpu clock set at 2GHz or
1GHz will output the same time results and could distort power measurements.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-01 16:55:30 -05:00
Nilay Vaish
a20fbdfc23 config: ruby: remove piobus from protocols
This patch removes the piobus from the protocol config files.  The ports
are now connected to the piobus in the Ruby.py file.
2014-03-17 17:40:15 -05:00
Nilay Vaish
8504b079b8 ruby: correct errors in changeset 4eec7bdde5b0
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created.  RubyPort, which earlier used to ignore range changes now
forwards those to the piobus.  The lack of piobus resulted in segmentation
fault.  This patch creates a piobus even in se mode.  It is not created only
when some tester is running.  Secondly,  I had missed out on modifying port
connections for other coherence protocols.
2014-02-24 20:50:05 -06:00
Nilay Vaish
4070b00875 ruby: add a three level MESI protocol.
The first two levels (L0, L1) are private to the core, the third level (L2)is
possibly shared. The protocol supports clustered designs.  For example, one
can have two sets of two cores. Each core has an L0 and L1 cache. There are
two L2 controllers where each set accesses only one of the L2 controllers.
2014-01-04 00:03:34 -06:00