Commit graph

231 commits

Author SHA1 Message Date
Dam Sunwoo
ca3513d630 cpu: use probes infrastructure to do simpoint profiling
Instead of having code embedded in cpu model to do simpoint profiling use
the probes infrastructure to do it.
2014-09-20 17:17:43 -04:00
Emilio Castillo ext:(%2C%20Nilay%20Vaish%20%3Cnilay%40cs.wisc.edu%3E)
01f792a367 ruby: Fixes clock domains in configuration files
This patch fixes scripts related to ruby by adding the ruby clock domain.
Now the L1 controllers and  the Sequencer shares the cpu clock domain,
while the rest of the components use the ruby clock domain.

Before this patch, running simulations with the cpu clock set at 2GHz or
1GHz will output the same time results and could distort power measurements.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2014-09-01 16:55:30 -05:00
Radhika Jagtap
860f00228b config: Fix cache latency param in mem test
This patch fixes the cache latency in mem test which is split into two params,
hit and response latency as per BaseCache.
2014-08-10 05:39:40 -04:00
Nilay Vaish
d6542d7758 configs: use SimpleMemory when using ruby in se mode
A recent changeset altered the default memory class to DRAMCtrl.  In se mode,
ruby uses the physical memory to check if a given address is within the bounds
of the physical memory.  SimpleMemory is enough for this.  Moreover,
SimpleMemory does not check whether it is connected or not, something which
DRAMCtrl does.
2014-04-01 11:17:46 -05:00
Nilay Vaish
b5cc4c7604 config: ruby: rename _cpu_ruby_ports to _cpu_ports 2014-03-20 09:14:14 -05:00
Nilay Vaish
f2059f8399 config: fs.py: move creating of test/drive systems to functions
The code that creates test and drive systems is being moved to separate
functions so as to make the code more readable.  Ultimately the two
functions would be combined so that the replicated code is eliminated.
2014-03-20 09:14:08 -05:00
Nilay Vaish
d5b5d89b34 config: remove ruby_fs.py
The patch removes the ruby_fs.py file.  The functionality is being moved to
fs.py.  This would being ruby fs simulations in line with how ruby se
simulations are started (using --ruby option).  The alpha fs config functions
are being combined for classing and ruby memory systems.  This required
renaming the piobus in ruby to iobus.  So, we will have stats being renamed
in the stats file for ruby fs regression.
2014-03-20 08:03:09 -05:00
Nilay Vaish
9b3418d163 ruby: no piobus in se mode
Piobus was recently added to se scripts for ruby so that the interrupt
controller can be connected to something (required since the interrupt
controller sends address range messages).  This patch removes the piobus
and instead, the pio port of ruby port will now ignore the range change
messages in se mode.
2014-03-20 08:03:09 -05:00
Nilay Vaish
8504b079b8 ruby: correct errors in changeset 4eec7bdde5b0
Couple of errors were discovered in 4eec7bdde5b0 which necessitated this patch.
Firstly, we create interrupt controllers in the se mode, but no piobus was
being created.  RubyPort, which earlier used to ignore range changes now
forwards those to the piobus.  The lack of piobus resulted in segmentation
fault.  This patch creates a piobus even in se mode.  It is not created only
when some tester is running.  Secondly,  I had missed out on modifying port
connections for other coherence protocols.
2014-02-24 20:50:05 -06:00
Nilay Vaish
7e27860ef4 ruby: route all packets through ruby port
Currently, the interrupt controller in x86 is connected to the io bus
directly.  Therefore the packets between the io devices and the interrupt
controller do not go through ruby.  This patch changes ruby port so that
these packets arrive at the ruby port first, which then routes them to their
destination.  Note that the patch does not make these packets go through the
ruby network.  That would happen in a subsequent patch.
2014-02-23 19:16:16 -06:00
Nilay Vaish
385e542c5a config: ruby_random_test: updates due to recent unrelated changes 2014-02-21 08:02:06 -06:00
Nilay Vaish
3526676165 config: correct bug in x86 drive sys instantiation 2014-01-31 15:35:45 -06:00
Nilay Vaish
95b782f600 config: allow more than 3GB of memory for x86 simulations
This patch edits the configuration files so that x86 simulations can have
more than 3GB of memory.  It also corrects a bug in the MemConfig.py script.
2014-01-27 18:50:51 -06:00
ARM gem5 Developers
612f8f074f arm: Add support for ARMv8 (AArch64 & AArch32)
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.

Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.

Contributors:
Giacomo Gabrielli    (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt       (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole           (AArch64 NEON, validation)
Ali Saidi            (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang         (AArch64 Linux support)
Rene De Jong         (AArch64 Linux support, performance opt.)
Matt Horsnell        (AArch64 MP, validation)
Matt Evans           (device models, code integration, validation)
Chris Adeniyi-Jones  (AArch64 syscall-emulation)
Prakash Ramrakhyani  (validation)
Dam Sunwoo           (validation)
Chander Sudanthi     (validation)
Stephan Diestelhorst (validation)
Andreas Hansson      (code integration, performance opt.)
Eric Van Hensbergen  (performance opt.)
Gabe Black
2014-01-24 15:29:34 -06:00
Dam Sunwoo
1e2a455a23 util: Streamline .apc project convertsion script
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
2013-10-17 10:20:45 -05:00
Ali Saidi
21f1e16763 config: Fix memtest example script 2013-10-17 10:20:45 -05:00
Nilay Vaish
dbc3b2e86a config: correct example ruby scripts
A couple of recent changesets added/deleted/edited some variables
that are needed for running the example ruby scripts. This changeset
edits these scripts to bring them to a working state.
2013-10-09 17:28:14 -05:00
Nilay Vaish
2dec06a57b config: set cwd for processes in se.py 2013-10-07 18:05:50 -05:00
Joel Hestness
30c588a483 configs: Fix ruby_fs.py cache line size
Recent changes added setting of system-wide cache line size and these settings
occur in the top-level configs (se.py and fs.py). This setting also needs to
take place in ruby_fs.py. This change sets the cache line size as appropriate.
2013-09-17 19:39:11 -05:00
Andreas Hansson
c9e45f01e4 config: Add voltage domain to Ruby example scripts
This patch adds the minimum required voltage domain configuration to
the Ruby example scripts.
2013-09-12 17:49:12 -04:00
Andreas Hansson
c26911013c config: Command line support for multi-channel memory
This patch adds support for specifying multi-channel memory
configurations on the command line, e.g. 'se/fs.py
--mem-type=ddr3_1600_x64 --mem-channels=4'. To enable this, it
enhances the functionality of MemConfig and moves the existing
makeMultiChannel class method from SimpleDRAM to the support scripts.

The se/fs.py example scripts are updated to make use of the new
feature.
2013-08-19 03:52:34 -04:00
Andreas Hansson
49d88f08b0 mem: Change AbstractMemory defaults to match the common case
This patch changes the default parameter value of conf_table_reported
to match the common case. It also simplifies the regression and config
scripts to reflect this change.
2013-08-19 03:52:33 -04:00
Akash Bagdia
e7e17f92db power: Add voltage domains to the clock domains
This patch adds the notion of voltage domains, and groups clock
domains that operate under the same voltage (i.e. power supply) into
domains. Each clock domain is required to be associated with a voltage
domain, and the latter requires the voltage to be explicitly set.

A voltage domain is an independently controllable voltage supply being
provided to section of the design. Thus, if you wish to perform
dynamic voltage scaling on a CPU, its clock domain should be
associated with a separate voltage domain.

The current implementation of the voltage domain does not take into
consideration cases where there are derived voltage domains running at
ratio of native voltage domains, as with the case where there can be
on-chip buck/boost (charge pumps) voltage regulation logic.

The regression and configuration scripts are updated with a generic
voltage domain for the system, and one for the CPUs.
2013-08-19 03:52:28 -04:00
Andreas Hansson
a8480fe1c3 config: Move the memory instantiation outside FSConfig
This patch moves the instantiation of the memory controller outside
FSConfig and instead relies on the mem_ranges to pass the information
to the caller (e.g. fs.py or one of the regression scripts). The main
motivation for this change is to expose the structural composition of
the memory system and allow more tuning and configuration without
adding a large number of options to the makeSystem functions.

The patch updates the relevant example scripts to maintain the current
functionality. As the order that ports are connected to the memory bus
changes (in certain regresisons), some bus stats are shuffled
around. For example, what used to be layer 0 is now layer 1.

Going forward, options will be added to support the addition of
multi-channel memory controllers.
2013-08-19 03:52:27 -04:00
Andreas Hansson
c20105c2ff config: Update script to set cache line size on system
This patch changes the config scripts such that they do not set the
cache line size per cache instance, but rather for the system as a
whole.
2013-07-18 08:31:19 -04:00
Nilay Vaish
516b7849e8 configs: rearrange the available options in Options.py
It also changes the instantiation of physmem in se.py so as to make
use of the memory size supplied by the mem_size option.
2013-06-28 21:42:26 -05:00
Akash Bagdia
7d7ab73862 sim: Add the notion of clock domains to all ClockedObjects
This patch adds the notion of source- and derived-clock domains to the
ClockedObjects. As such, all clock information is moved to the clock
domain, and the ClockedObjects are grouped into domains.

The clock domains are either source domains, with a specific clock
period, or derived domains that have a parent domain and a divider
(potentially chained). For piece of logic that runs at a derived clock
(a ratio of the clock its parent is running at) the necessary derived
clock domain is created from its corresponding parent clock
domain. For now, the derived clock domain only supports a divider,
thus ensuring a lower speed compared to its parent. Multiplier
functionality implies a PLL logic that has not been modelled yet
(create a separate clock instead).

The clock domains should be used as a mechanism to provide a
controllable clock source that affects clock for every clocked object
lying beneath it. The clock of the domain can (in a future patch) be
controlled by a handler responsible for dynamic frequency scaling of
the respective clock domains.

All the config scripts have been retro-fitted with clock domains. For
the System a default SrcClockDomain is created. For CPUs that run at a
different speed than the system, there is a seperate clock domain
created. This domain incorporates the CPU and the associated
caches. As before, Ruby runs under its own clock domain.

The clock period of all domains are pre-computed, such that no virtual
functions or multiplications are needed when calling
clockPeriod. Instead, the clock period is pre-computed when any
changes occur. For this to be possible, each clock domain tracks its
children.
2013-06-27 05:49:49 -04:00
Akash Bagdia
076d04a653 config: Add a system clock command-line option
This patch adds a 'sys_clock' command-line option and use it to assign
clocks to the system during instantiation.

As part of this change, the default clock in the System class is
removed and whenever a system is instantiated a system clock value
must be set. A default value is provided for the command-line option.

The configs and tests are updated accordingly.
2013-06-27 05:49:49 -04:00
Akash Bagdia
4459b30525 config: Add a CPU clock command-line option
This patch adds a 'cpu_clock' command-line option and uses the value
to assign clocks to components running at the CPU speed (L1 and L2
including the L2-bus). The configuration scripts are updated
accordingly.

The 'clock' option is left unchanged in this patch as it is still used
by a number of components. In follow-on patches the latter will be
disambiguated further.
2013-06-27 05:49:49 -04:00
Akash Bagdia
7eccb1b779 config: Remove redundant explicit setting of default clocks
This patch removes the explicit setting of the clock period for
certain instances of CoherentBus, NonCoherentBus and IOCache where the
specified clock is same as the default value of the system clock. As
all the values used are the defaults, there are no performance
changes. There are similar cases where the toL2Bus is set to use the
parent CPU clock which is already the default behaviour.

The main motivation for these simplifications is to ease the
introduction of clock domains.
2013-06-27 05:49:49 -04:00
Nilay Vaish
be981772b9 config: Do not instantiate membus when using ruby
This patch moves the instantiation of system.membus in se.py to the area of
code where classic memory system has been dealt with. Ruby does not require
this bus and hence it should not be instantiated.
2013-06-13 07:24:25 -05:00
Marco Elver
0c57194a09 config: Fix mem-type option not used in ruby_fs script
This fixes missing mem-type arguments to makeLinuxAlphaRubySystem and
makeLinuxX86System after a recent changeset allowing mem-type to be
configured via options missed fixing these calls.

Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2013-04-23 11:56:48 -05:00
Andreas Hansson
3477d60d5c config: Add a mem-type config option to se/fs scripts
This patch enables selection of the memory controller class through a
mem-type command-line option. Behind the scenes, this option is
treated much like the cpu-type, and a similar framework is used to
resolve the valid options, and translate the short-hand description to
a valid class.

The regression scripts are updated with a hardcoded memory class for
the moment. The best solution going forward is probably to get the
memory out of the makeSystem functions, but Ruby complicates things as
it does not connect the memory controller to the membus.

--HG--
rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
2013-04-22 13:20:33 -04:00
Andreas Sandberg
7865d6e838 config: Add a KVM VM to systems with KVM CPUs
KVM-based CPUs need a KVM VM object in the system to manage
system-global KVM stuff (VM creation, interrupt delivery, memory
managment, etc.). This changeset adds a VM to the system if KVM has
been enabled at compile time (the BaseKvmCPU object exists) and a
KVM-based CPU has been selected at runtime.
2013-04-22 13:20:32 -04:00
Dam Sunwoo
2c1e344313 cpu: generate SimPoint basic block vector profiles
This patch is based on http://reviews.m5sim.org/r/1474/ originally written by
Mitch Hayenga. Basic block vectors are generated (simpoint.bb.gz in simout
folder) based on start and end addresses of basic blocks.

Some comments to the original patch are addressed and hooks are added to create
and resume from checkpoints based on instruction counts dictated by external
SimPoint analysis tools.

SimPoint creation/resuming options will be implemented as a separate patch.
2013-04-22 13:20:31 -04:00
Nilay Vaish
c061819890 ruby: remove the functional copy of memory in se mode
This patch removes the functional copy of the memory that was maintained in
the se mode. Now ruby itself will provide the data.
2013-03-06 21:53:57 -06:00
Anthony Gutierrez
21aa950318 options: add command line option for dtb file 2013-02-15 18:48:59 -05:00
Andreas Hansson
e65de3f5ca config: Do not use hardcoded physmem in fs script
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.

The change is needed to allow interleaved memory controllers in the
system.
2013-01-07 13:05:38 -05:00
Andreas Sandberg
3db3f83a5e arch: Make the ISA class inherit from SimObject
The ISA class on stores the contents of ID registers on many
architectures. In order to make reset values of such registers
configurable, we make the class inherit from SimObject, which allows
us to use the normal generated parameter headers.

This patch introduces a Python helper method, BaseCPU.createThreads(),
which creates a set of ISAs for each of the threads in an SMT
system. Although it is currently only needed when creating
multi-threaded CPUs, it should always be called before instantiating
the system as this is an obvious place to configure ID registers
identifying a thread/CPU.
2013-01-07 13:05:35 -05:00
Nilay Vaish
c120273708 ruby: modify the directed tester to read/write streams
The directed tester supports only generating only read or only write accesses. The
patch modifies the tester to support streams that have both read and write accesses.
2012-12-11 10:05:55 -06:00
Andreas Hansson
a4d8996fd9 config: Add a check for fastmem only used with Atomic CPU
This patch adds an additional check to ensure that the fastmem option
is only used if the system is using the Atomic CPU.
2012-10-26 06:42:45 -04:00
Andreas Hansson
7cd01cf769 config: Remove unused mem_size in fs.py
This patch removes a segment of dead code that is never used.
2012-10-26 06:42:43 -04:00
Nilay Vaish
5ffc165939 ruby: improved support for functional accesses
This patch adds support to different entities in the ruby memory system
for more reliable functional read/write accesses. Only the simple network
has been augmented as of now. Later on Garnet will also support functional
accesses.
The patch adds functional access code to all the different types of messages
that protocols can send around. These messages are functionally accessed
by going through the buffers maintained by the network entities.
The patch also rectifies some of the bugs found in coherence protocols while
testing the patch.

With this patch applied, functional writes always succeed. But functional
reads can still fail.
2012-10-15 17:51:57 -05:00
Andreas Hansson
88554790c3 Mem: Use cycles to express cache-related latencies
This patch changes the cache-related latencies from an absolute time
expressed in Ticks, to a number of cycles that can be scaled with the
clock period of the caches. Ultimately this patch serves to enable
future work that involves dynamic frequency scaling. As an immediate
benefit it also makes it more convenient to specify cache performance
without implicitly assuming a specific CPU core operating frequency.

The stat blocked_cycles that actually counter in ticks is now updated
to count in cycles.

As the timing is now rounded to the clock edges of the cache, there
are some regressions that change. Plenty of them have very minor
changes, whereas some regressions with a short run-time are perturbed
quite significantly. A follow-on patch updates all the statistics for
the regressions.
2012-10-15 08:10:54 -04:00
Malek Musleh
3fc23b9b96 Configs: SE script fix for Alpha and Ruby simulations
PIO interrupt port is only present for x86. Do not attempt to connect
for other ISAs.
2012-09-28 09:35:25 -04:00
Andreas Hansson
6596059d05 Configs: Fix memtest cache latency to match new parameters
This patch changes the memtest config to use the new response latency
of the cache model.
2012-09-27 08:59:25 -04:00
Andreas Hansson
9d9b71e485 Configs: Fix memtest.py by moving the system port
The memtest.py script used to connect the system port directly to the
SimpleMemory, but the latter is now single ported. Since the system
port is not used for anything in this particular example, a quick fix
is to attach it to the functional bus instead.
2012-09-27 03:24:21 -04:00
Joel Hestness
90dd745ff6 se.py Ruby: Connect TLB walker ports
In order to ensure correct functionality of switch CPUs, the TLB walker ports
must be connected to the Ruby system in x86 simulation.

This fixes x86 assertion failures that the TLB walker ports are not connected
during the CPU switch process.
2012-09-12 21:42:57 -05:00
Nilay Vaish
89a5ba1ef8 se.py: removes error in passing options to a binary 2012-09-11 17:47:21 -05:00
Nilay Vaish
0b45ae5df3 se.py: support specifying multiple programs via command line
This patch allows for specifying multiple programs via command line. It also
adds an option for specifying whether to use of SMT. But SMT does not work for
the o3 cpu as of now.
2012-09-09 09:33:45 -05:00