diff --git a/src/doc/power_thermal_model.doxygen b/src/doc/power_thermal_model.doxygen new file mode 100644 index 000000000..8b636ab23 --- /dev/null +++ b/src/doc/power_thermal_model.doxygen @@ -0,0 +1,128 @@ +# Copyright (c) 2016 ARM Limited +# All rights reserved +# +# The license below extends only to copyright in the software and shall +# not be construed as granting a license to any other intellectual +# property including but not limited to intellectual property relating +# to a hardware implementation of the functionality of the software +# licensed hereunder. You may use the software subject to the license +# terms below provided that you ensure that this notice is replicated +# unmodified and in its entirety in all distributions of the software, +# modified or unmodified, in source code or in binary form. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Author: David Guillen Fandos + +/*! \page gem5PowerModel Gem5 Power & Thermal model + + \tableofcontents + + This document gives an overview of the power and thermal modelling + infrastructure in Gem5. The purpose is to give a high level view of + all the pieces involved and how they interact with each other and + the simulator. + + \section gem5_PM_CD Class overview + + Classes involved in the power model are: + + - PowerModel: Represents a power model for a hardware component. + + - PowerModelState: Represents a power model for a hardware component + in a certain power state. It is an abstract class that defines an + interface that must be implemented for each model. + + - MathExprPowerModel: Simple implementation of PowerModelState that + assumes that power can be modeled using a simple power + + Classes involved in the thermal model are: + + - ThermalModel: Contains the system thermal model logic and state. + It performs the power query and temperature update. It also enables + gem5 to query for temperature (for OS reporting). + + - ThermalDomain: Represents an entity that generates heat. It's + essentially a group of SimObjects grouped under a SubSystem component + that have its own thermal behaviour. + + - ThermalNode: Represents a node in the thermal circuital equivalent. + The node has a temperature and interacts with other nodes through + connections (thermal resistors and capacitors). + + - ThermalReference: Temperature reference for the thermal model + (essentially a thermal node with a fixed temperature), can be used + to model air or any other constant temperature domains. + + - ThermalEntity: A thermal component that connects two thermal nodes + and models a thermal impedance between them. This class is just an + abstract interface. + + - ThermalResistor: Implements ThermalEntity to model a thermal resistance + between the two nodes it connects. Thermal resistances model the + capacity of a material to transfer heat (units in K/W). + + - ThermalCapacitor. Implements ThermalEntity to model a thermal + capacitance. Thermal capacitors are used to model material's thermal + capacitance, this is, the ability to change a certain material + temperature (units in J/K). + + \section gem5_thermal Thermal model + + The thermal model works by creating a circuital equivalent of the + simulated platform. Each node in the circuit has a temperature (as + voltage equivalent) and power flows between nodes (as current in a + circuit). + + To build this equivalent temperature model the platform is required + to group the power actors (any component that has a power model) + under SubSystems and attach ThermalDomains to those subsystems. + Other components might also be created (like ThermalReferences) and + connected all together by creating thermal entities (capacitors and + resistors). + + Last step to conclude the thermal model is to create the ThermalModel + instance itself and attach all the instances used to it, so it can + properly update them at runtime. Only one thermal model instance is + supported right now and it will automatically report temperature when + appropriate (ie. platform sensor devices). + + \section gem5_power Power model + + Every ClockedObject has a power model associated. If this power model is + non-null power will be calculated at every stats dump (although it might + be possible to force power evaluation at any other point, if the power + model uses the stats, it is a good idea to keep both events in sync). + The definition of a power model is quite vague in the sense that it is + as flexible as users want it to be. The only enforced contraints so far + is the fact that a power model has several power state models, one for + each possible power state for that hardware block. When it comes to compute + power consumption the power is just the weighted average of each power model. + + A power state model is essentially an interface that allows us to define two + power functions for dynamic and static. As an example implementation a class + called MathExprPowerModel has been provided. This implementation allows the + user to define a power model as an equation involving several statistics. + There's also some automatic (or "magic") variables such as "temp", which + reports temperature. diff --git a/src/sim/ClockedObject.py b/src/sim/ClockedObject.py index b933ea07a..e393dc467 100644 --- a/src/sim/ClockedObject.py +++ b/src/sim/ClockedObject.py @@ -66,6 +66,9 @@ class ClockedObject(SimObject): # parent's clock domain by default clk_domain = Param.ClockDomain(Parent.clk_domain, "Clock domain") + # Power model for this ClockedObject + power_model = Param.PowerModel(NULL, "Power model") + # Provide initial power state, should ideally get redefined in startup # routine default_p_state = Param.PwrState("UNDEFINED", "Default Power State") diff --git a/src/sim/SConscript b/src/sim/SConscript index e40c43f0c..22b9ef5cd 100644 --- a/src/sim/SConscript +++ b/src/sim/SConscript @@ -70,6 +70,7 @@ Source('linear_solver.cc') Source('system.cc') Source('dvfs_handler.cc') Source('clocked_object.cc') +Source('mathexpr.cc') if env['TARGET_ISA'] != 'null': SimObject('InstTracer.py') diff --git a/src/sim/clocked_object.cc b/src/sim/clocked_object.cc index 9a682a4ce..e679f03a0 100644 --- a/src/sim/clocked_object.cc +++ b/src/sim/clocked_object.cc @@ -41,6 +41,17 @@ #include "sim/clocked_object.hh" #include "base/misc.hh" +#include "sim/power/power_model.hh" + +ClockedObject::ClockedObject(const ClockedObjectParams *p) : + SimObject(p), Clocked(*p->clk_domain), + _currPwrState(p->default_p_state), + prvEvalTick(0) +{ + // Register the power_model with the object + if (p->power_model) + p->power_model->setClockedObject(this); +} void ClockedObject::serialize(CheckpointOut &cp) const diff --git a/src/sim/clocked_object.hh b/src/sim/clocked_object.hh index 1ba5ca617..b88f2435d 100644 --- a/src/sim/clocked_object.hh +++ b/src/sim/clocked_object.hh @@ -236,11 +236,7 @@ class ClockedObject : public SimObject, public Clocked { public: - ClockedObject(const ClockedObjectParams *p) - : SimObject(p), Clocked(*p->clk_domain), - _currPwrState(p->default_p_state), - prvEvalTick(0) - { } + ClockedObject(const ClockedObjectParams *p); /** Parameters of ClockedObject */ typedef ClockedObjectParams Params; diff --git a/src/sim/mathexpr.cc b/src/sim/mathexpr.cc new file mode 100644 index 000000000..5654c80fa --- /dev/null +++ b/src/sim/mathexpr.cc @@ -0,0 +1,175 @@ +/* + * Copyright (c) 2015 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: David Guillen Fandos + */ + +#include "sim/mathexpr.hh" + +#include +#include +#include + +#include "base/misc.hh" + +MathExpr::MathExpr(std::string expr) + : ops( + std::array { + OpSearch {true, bAdd, 0, '+', [] (double a, double b) { return a + b; } }, + OpSearch {true, bSub, 0, '-', [] (double a, double b) { return a - b; } }, + OpSearch {true, bMul, 1, '*', [] (double a, double b) { return a * b; } }, + OpSearch {true, bDiv, 1, '/', [] (double a, double b) { return a / b; } }, + OpSearch {false,uNeg, 2, '-', [] (double a, double b) { return -b; } }, + OpSearch {true, bPow, 3, '^', [] (double a, double b) { return std::pow(a,b); } }, + }) +{ + // Cleanup + expr.erase(remove_if(expr.begin(), expr.end(), isspace), expr.end()); + + root = MathExpr::parse(expr); + panic_if(!root, "Invalid expression\n"); +} + +/** + * This function parses a string expression into an expression tree. + * It will look for operators in priority order to recursively build the + * tree, respecting parenthesization. + * Constants can be expressed in any format accepted by std::stod, whereas + * variables are essentially [A-Za-z0-9\.$\\]+ + */ +MathExpr::Node * +MathExpr::parse(std::string expr) { + if (expr.size() == 0) + return NULL; + + // From low to high priority + int par = 0; + for (unsigned p = 0; p < MAX_PRIO; p++) { + for (int i = expr.size() - 1; i >= 0; i--) { + if (expr[i] == ')') + par++; + if (expr[i] == '(') + par--; + + if (par < 0) return NULL; + if (par > 0) continue; + + for (unsigned opt = 0; opt < ops.size(); opt++) { + if (ops[opt].priority != p) continue; + if (ops[opt].c == expr[i]) { + // Try to parse each side + Node *l = NULL; + if (ops[opt].binary) + l = parse(expr.substr(0, i)); + Node *r = parse(expr.substr(i + 1)); + if ((l && r) || (!ops[opt].binary && r)) { + // Match! + Node *n = new Node(); + n->op = ops[opt].op; + n->l = l; + n->r = r; + return n; + } + } + } + } + } + + // Remove trivial parenthesis + if (expr.size() >= 2 && expr[0] == '(' && expr[expr.size() - 1] == ')') + return parse(expr.substr(1, expr.size() - 2)); + + // Match a number + { + char *sptr; + double v = strtod(expr.c_str(), &sptr); + if (sptr != expr.c_str()) { + Node *n = new Node(); + n->op = sValue; + n->value = v; + return n; + } + } + + // Match a variable + { + bool contains_non_alpha = false; + for (auto & c: expr) + contains_non_alpha = contains_non_alpha or + !( (c >= 'a' && c <= 'z') || + (c >= 'A' && c <= 'Z') || + (c >= '0' && c <= '9') || + c == '$' || c == '\\' || c == '.' || c == '_'); + + if (!contains_non_alpha) { + Node * n = new Node(); + n->op = sVariable; + n->variable = expr; + return n; + } + } + + return NULL; +} + +double +MathExpr::eval(const Node *n, EvalCallback fn) const { + if (!n) + return 0; + else if (n->op == sValue) + return n->value; + else if (n->op == sVariable) + return fn(n->variable); + + for (auto & opt : ops) + if (opt.op == n->op) + return opt.fn( eval(n->l, fn), eval(n->r, fn) ); + + panic("Invalid node!\n"); + return 0; +} + +std::string +MathExpr::toStr(Node *n, std::string prefix) const { + std::string ret; + ret += prefix + "|-- " + n->toStr() + "\n"; + if (n->r) + ret += toStr(n->r, prefix + "| "); + if (n->l) + ret += toStr(n->l, prefix + "| "); + return ret; +} + diff --git a/src/sim/mathexpr.hh b/src/sim/mathexpr.hh new file mode 100644 index 000000000..8f16cc851 --- /dev/null +++ b/src/sim/mathexpr.hh @@ -0,0 +1,127 @@ +/* + * Copyright (c) 2015 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: David Guillen Fandos + */ + +#ifndef __SIM_MATHEXPR_HH__ +#define __SIM_MATHEXPR_HH__ + +#include +#include +#include + +class MathExpr { + public: + + MathExpr(std::string expr); + + typedef std::function EvalCallback; + + /** + * Prints an ASCII representation of the expression tree + * + * @return A string containing the ASCII representation of the expression + */ + std::string toStr() const { return toStr(root, ""); } + + /** + * Evaluates the expression + * + * @param fn A callback funcion to evaluate variables + * + * @return The value for this expression + */ + double eval(EvalCallback fn) const { return eval(root, fn); } + + private: + enum Operator { + bAdd, bSub, bMul, bDiv, bPow, uNeg, sValue, sVariable, nInvalid + }; + + // Match operators + const int MAX_PRIO = 4; + typedef double (*binOp)(double, double); + struct OpSearch { + bool binary; + Operator op; + int priority; + char c; + binOp fn; + }; + + /** Operator list */ + std::array ops; + + class Node { + public: + Node() : op(nInvalid), l(0), r(0), value(0) {} + std::string toStr() const { + const char opStr[] = {'+', '-', '*', '/', '^', '-'}; + switch (op) { + case nInvalid: + return "INVALID"; + case sVariable: + return variable; + case sValue: + return std::to_string(value); + default: + return std::string(1, opStr[op]); + }; + } + + Operator op; + Node *l, *r; + double value; + std::string variable; + }; + + /** Root node */ + Node * root; + + /** Parse and create nodes from string */ + Node *parse(std::string expr); + + /** Print tree as string */ + std::string toStr(Node *n, std::string prefix) const; + + /** Eval a node */ + double eval(const Node *n, EvalCallback fn) const; +}; + +#endif + + diff --git a/src/sim/power/MathExprPowerModel.py b/src/sim/power/MathExprPowerModel.py new file mode 100644 index 000000000..061f7e767 --- /dev/null +++ b/src/sim/power/MathExprPowerModel.py @@ -0,0 +1,52 @@ +# Copyright (c) 2015 ARM Limited +# All rights reserved. +# +# The license below extends only to copyright in the software and shall +# not be construed as granting a license to any other intellectual +# property including but not limited to intellectual property relating +# to a hardware implementation of the functionality of the software +# licensed hereunder. You may use the software subject to the license +# terms below provided that you ensure that this notice is replicated +# unmodified and in its entirety in all distributions of the software, +# modified or unmodified, in source code or in binary form. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: David Guillen Fandos + +from m5.SimObject import SimObject +from m5.params import * +from PowerModelState import PowerModelState + +# Represents a power model for a simobj +class MathExprPowerModel(PowerModelState): + type = 'MathExprPowerModel' + cxx_header = "sim/power/mathexpr_powermodel.hh" + + # Equations for dynamic and static power + # Equations may use gem5 stats ie. "1.1*ipc + 2.3*l2_cache.overall_misses" + # It is possible to use automatic variables such as "temp" + # You may also use stat names (relative path to the simobject) + dyn = Param.String("", "Expression for the dynamic power") + st = Param.String("", "Expression for the static power") diff --git a/src/sim/power/PowerModel.py b/src/sim/power/PowerModel.py new file mode 100644 index 000000000..4e6d496c4 --- /dev/null +++ b/src/sim/power/PowerModel.py @@ -0,0 +1,61 @@ +# Copyright (c) 2015 ARM Limited +# All rights reserved. +# +# The license below extends only to copyright in the software and shall +# not be construed as granting a license to any other intellectual +# property including but not limited to intellectual property relating +# to a hardware implementation of the functionality of the software +# licensed hereunder. You may use the software subject to the license +# terms below provided that you ensure that this notice is replicated +# unmodified and in its entirety in all distributions of the software, +# modified or unmodified, in source code or in binary form. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: David Guillen Fandos + +from m5.SimObject import SimObject +from m5.params import * +from m5.proxy import Parent + +# Represents a power model for a simobj +# The model itself is also a SimObject so we can make use some +# nice features available such as Parent.any +class PowerModel(SimObject): + type = 'PowerModel' + cxx_header = "sim/power/power_model.hh" + + @classmethod + def export_methods(cls, code): + code(''' + double getDynamicPower() const; + double getStaticPower() const; +''') + + # Keep a list of every model for every power state + pm = VectorParam.PowerModelState([], "List of per-state power models.") + + # Need a reference to the system so we can query the thermal domain + # about temperature (temperature is needed for leakage calculation) + subsystem = Param.SubSystem(Parent.any, "subsystem") diff --git a/src/sim/power/PowerModelState.py b/src/sim/power/PowerModelState.py new file mode 100644 index 000000000..10b3141d0 --- /dev/null +++ b/src/sim/power/PowerModelState.py @@ -0,0 +1,55 @@ +# Copyright (c) 2015 ARM Limited +# All rights reserved. +# +# The license below extends only to copyright in the software and shall +# not be construed as granting a license to any other intellectual +# property including but not limited to intellectual property relating +# to a hardware implementation of the functionality of the software +# licensed hereunder. You may use the software subject to the license +# terms below provided that you ensure that this notice is replicated +# unmodified and in its entirety in all distributions of the software, +# modified or unmodified, in source code or in binary form. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: David Guillen Fandos + +from m5.SimObject import SimObject +from m5.params import * + +# Represents a power model for a simobj +class PowerModelState(SimObject): + type = 'PowerModelState' + cxx_header = "sim/power/power_model.hh" + abstract = True + cxx_class = 'PowerModelState' + + @classmethod + def export_methods(cls, code): + code(''' + double getDynamicPower() const; + double getStaticPower() const; +''') + + diff --git a/src/sim/power/SConscript b/src/sim/power/SConscript index 8ec65519c..2f0eb4fc1 100644 --- a/src/sim/power/SConscript +++ b/src/sim/power/SConscript @@ -30,9 +30,14 @@ Import('*') +SimObject('MathExprPowerModel.py') +SimObject('PowerModel.py') +SimObject('PowerModelState.py') SimObject('ThermalDomain.py') SimObject('ThermalModel.py') +Source('power_model.cc') +Source('mathexpr_powermodel.cc') Source('thermal_domain.cc') Source('thermal_model.cc') diff --git a/src/sim/power/mathexpr_powermodel.cc b/src/sim/power/mathexpr_powermodel.cc new file mode 100644 index 000000000..000bcf22d --- /dev/null +++ b/src/sim/power/mathexpr_powermodel.cc @@ -0,0 +1,102 @@ +/* + * Copyright (c) 2015 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: David Guillen Fandos + */ + +#include "sim/power/mathexpr_powermodel.hh" + +#include "base/statistics.hh" +#include "params/MathExprPowerModel.hh" +#include "sim/mathexpr.hh" +#include "sim/power/thermal_model.hh" +#include "sim/sim_object.hh" + +MathExprPowerModel::MathExprPowerModel(const Params *p) + : PowerModelState(p), dyn_expr(p->dyn), st_expr(p->st) +{ + // Calculate the name of the object we belong to + std::vector path; + tokenize(path, name(), '.', true); + // It's something like xyz.power_model.pm2 + assert(path.size() > 2); + for (unsigned i = 0; i < path.size() - 2; i++) + basename += path[i] + "."; +} + +void +MathExprPowerModel::startup() +{ + // Create a map with stats and pointers for quick access + // Has to be done here, since we need access to the statsList + for (auto & i: Stats::statsList()) + if (i->name.find(basename) == 0) + stats_map[i->name.substr(basename.size())] = i; +} + +double +MathExprPowerModel::getStatValue(const std::string &name) const +{ + using namespace Stats; + + // Automatic variables: + if (name == "temp") + return _temp; + + // Try to cast the stat, only these are supported right now + Info *info = stats_map.at(name); + + ScalarInfo *si = dynamic_cast(info); + if (si) + return si->value(); + FormulaInfo *fi = dynamic_cast(info); + if (fi) + return fi->total(); + + panic("Unknown stat type!\n"); +} + +void +MathExprPowerModel::regStats() +{ + PowerModelState::regStats(); +} + +MathExprPowerModel* +MathExprPowerModelParams::create() +{ + return new MathExprPowerModel(this); +} diff --git a/src/sim/power/mathexpr_powermodel.hh b/src/sim/power/mathexpr_powermodel.hh new file mode 100644 index 000000000..43584fbd8 --- /dev/null +++ b/src/sim/power/mathexpr_powermodel.hh @@ -0,0 +1,111 @@ +/* + * Copyright (c) 2015 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: David Guillen Fandos + */ + +#ifndef __SIM_MATHEXPR_POWERMODEL_PM_HH__ +#define __SIM_MATHEXPR_POWERMODEL_PM_HH__ + +#include + +#include "base/statistics.hh" +#include "params/MathExprPowerModel.hh" +#include "sim/mathexpr.hh" +#include "sim/power/power_model.hh" +#include "sim/sim_object.hh" + +/** + * A Equation power model. The power is represented as a combination + * of some stats and automatic variables (like temperature). + */ +class MathExprPowerModel : public PowerModelState +{ + public: + + typedef MathExprPowerModelParams Params; + MathExprPowerModel(const Params *p); + + /** + * Get the dynamic power consumption. + * + * @return Power (Watts) consumed by this object (dynamic component) + */ + double getDynamicPower() const { + return dyn_expr.eval( + std::bind(&MathExprPowerModel::getStatValue, + this, std::placeholders::_1) + ); + } + + /** + * Get the static power consumption. + * + * @return Power (Watts) consumed by this object (static component) + */ + double getStaticPower() const { + return st_expr.eval( + std::bind(&MathExprPowerModel::getStatValue, + this, std::placeholders::_1) + ); + } + + /** + * Get the value for a variable (maps to a stat) + * + * @param name Name of the variable to retrieve the value from + * + * @return Power (Watts) consumed by this object (static component) + */ + double getStatValue(const std::string & name) const; + + void startup(); + + void regStats(); + + private: + + // Math expressions for dynamic and static power + MathExpr dyn_expr, st_expr; + + // Basename of the object in the gem5 stats hierachy + std::string basename; + + // Map that contains relevant stats for this power model + std::unordered_map stats_map; +}; + +#endif diff --git a/src/sim/power/power_model.cc b/src/sim/power/power_model.cc new file mode 100644 index 000000000..d01084b34 --- /dev/null +++ b/src/sim/power/power_model.cc @@ -0,0 +1,138 @@ +/* + * Copyright (c) 2015 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: David Guillen Fandos + */ + +#include "sim/power/power_model.hh" + +#include "base/statistics.hh" +#include "params/PowerModel.hh" +#include "params/PowerModelState.hh" +#include "sim/sim_object.hh" +#include "sim/sub_system.hh" + +PowerModelState::PowerModelState(const Params *p) + : SimObject(p), _temp(0), clocked_object(NULL) +{ +} + +PowerModel::PowerModel(const Params *p) + : SimObject(p), states_pm(p->pm), subsystem(p->subsystem), + clocked_object(NULL) +{ + panic_if(subsystem == NULL, + "Subsystem is NULL! This is not acceptable for a PowerModel!\n"); + subsystem->registerPowerProducer(this); +} + +void +PowerModel::setClockedObject(ClockedObject * clkobj) +{ + this->clocked_object = clkobj; + + for (auto & pms: states_pm) + pms->setClockedObject(clkobj); +} + +void +PowerModel::thermalUpdateCallback(const double & temp) +{ + for (auto & pms: states_pm) + pms->setTemperature(temp); +} + +void +PowerModel::regProbePoints() +{ + thermalListener.reset(new ThermalProbeListener ( + *this, this->subsystem->getProbeManager(), "thermalUpdate" + )); +} + +PowerModel* +PowerModelParams::create() +{ + return new PowerModel(this); +} + +double +PowerModel::getDynamicPower() const +{ + assert(clocked_object); + + std::vector w = clocked_object->pwrStateWeights(); + + // Same number of states (excluding UNDEFINED) + assert(w.size() - 1 == states_pm.size()); + + // Make sure we have no UNDEFINED state + warn_if(w[Enums::PwrState::UNDEFINED] > 0, + "SimObject in UNDEFINED power state! Power figures might be wrong!\n"); + + double power = 0; + for (unsigned i = 0; i < states_pm.size(); i++) + if (w[i + 1] > 0.0f) + power += states_pm[i]->getDynamicPower() * w[i + 1]; + + return power; +} + +double +PowerModel::getStaticPower() const +{ + assert(clocked_object); + + std::vector w = clocked_object->pwrStateWeights(); + + // Same number of states (excluding UNDEFINED) + assert(w.size() - 1 == states_pm.size()); + + // Make sure we have no UNDEFINED state + if (w[0] > 0) + warn("SimObject in UNDEFINED power state! " + "Power figures might be wrong!\n"); + + // We have N+1 states, being state #0 the default 'UNDEFINED' state + double power = 0; + for (unsigned i = 0; i < states_pm.size(); i++) + // Don't evaluate power if the object hasn't been in that state + // This fixes issues with NaNs and similar. + if (w[i + 1] > 0.0f) + power += states_pm[i]->getStaticPower() * w[i + 1]; + + return power; +} diff --git a/src/sim/power/power_model.hh b/src/sim/power/power_model.hh new file mode 100644 index 000000000..f907597b4 --- /dev/null +++ b/src/sim/power/power_model.hh @@ -0,0 +1,188 @@ +/* + * Copyright (c) 2015 ARM Limited + * All rights reserved + * + * The license below extends only to copyright in the software and shall + * not be construed as granting a license to any other intellectual + * property including but not limited to intellectual property relating + * to a hardware implementation of the functionality of the software + * licensed hereunder. You may use the software subject to the license + * terms below provided that you ensure that this notice is replicated + * unmodified and in its entirety in all distributions of the software, + * modified or unmodified, in source code or in binary form. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer; + * redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution; + * neither the name of the copyright holders nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Authors: David Guillen Fandos + */ + +#ifndef __SIM_POWER_POWER_MODEL_HH__ +#define __SIM_POWER_POWER_MODEL_HH__ + +#include "base/statistics.hh" +#include "params/PowerModel.hh" +#include "params/PowerModelState.hh" +#include "sim/power/thermal_model.hh" +#include "sim/probe/probe.hh" +#include "sim/sim_object.hh" + +/** + * A PowerModelState is an abstract class used as interface to get power + * figures out of SimObjects + */ +class PowerModelState : public SimObject +{ + public: + + typedef PowerModelStateParams Params; + PowerModelState(const Params *p); + + /** + * Get the dynamic power consumption. + * + * @return Power (Watts) consumed by this object (dynamic component) + */ + virtual double getDynamicPower() const = 0; + + /** + * Get the static power consumption. + * + * @return Power (Watts) consumed by this object (static component) + */ + virtual double getStaticPower() const = 0; + + /** + * Temperature update. + * + * @param temp Current temperature of the HW part (Celsius) + */ + virtual void setTemperature(double temp) { _temp = temp; } + + void setClockedObject(ClockedObject * clkobj) { + clocked_object = clkobj; + } + + void regStats() { + dynamicPower + .method(this, &PowerModelState::getDynamicPower) + .name(params()->name + ".dynamic_power") + .desc("Dynamic power for this object (Watts)") + ; + + staticPower + .method(this, &PowerModelState::getStaticPower) + .name(params()->name + ".static_power") + .desc("Static power for this object (Watts)") + ; + } + + protected: + Stats::Value dynamicPower, staticPower; + + /** Current temperature */ + double _temp; + + /** The clocked object we belong to */ + ClockedObject * clocked_object; +}; + +/** + * A PowerModel is a class containing a power model for a SimObject. + * The PM describes the power consumption for every power state. + */ +class PowerModel : public SimObject +{ + public: + + typedef PowerModelParams Params; + PowerModel(const Params *p); + + /** + * Get the dynamic power consumption. + * + * @return Power (Watts) consumed by this object (dynamic component) + */ + double getDynamicPower() const; + + /** + * Get the static power consumption. + * + * @return Power (Watts) consumed by this object (static component) + */ + double getStaticPower() const; + + void regStats() { + dynamicPower + .method(this, &PowerModel::getDynamicPower) + .name(params()->name + ".dynamic_power") + .desc("Dynamic power for this power state") + ; + + staticPower + .method(this, &PowerModel::getStaticPower) + .name(params()->name + ".static_power") + .desc("Static power for this power state") + ; + } + + void setClockedObject(ClockedObject *clkobj); + + virtual void regProbePoints(); + + void thermalUpdateCallback(const double & temp); + + protected: + /** Listener class to catch thermal events */ + class ThermalProbeListener : public ProbeListenerArgBase + { + public: + ThermalProbeListener(PowerModel &_pm, ProbeManager *pm, + const std::string &name) + : ProbeListenerArgBase(pm, name), pm(_pm) {} + + void notify(const double &temp) + { + pm.thermalUpdateCallback(temp); + } + + protected: + PowerModel ± + }; + + Stats::Value dynamicPower, staticPower; + + /** Actual power models (one per power state) */ + std::vector states_pm; + + /** Listener to catch temperature changes in the SubSystem */ + std::unique_ptr thermalListener; + + /** The subsystem this power model belongs to */ + SubSystem * subsystem; + + /** The clocked object we belong to */ + ClockedObject * clocked_object; +}; + +#endif diff --git a/src/sim/power/thermal_domain.cc b/src/sim/power/thermal_domain.cc index 4b840670d..62a0c23f8 100644 --- a/src/sim/power/thermal_domain.cc +++ b/src/sim/power/thermal_domain.cc @@ -108,7 +108,8 @@ LinearEquation ThermalDomain::getEquation(ThermalNode * tn, unsigned n, double step) const { LinearEquation eq(n); + double power = subsystem->getDynamicPower() + subsystem->getStaticPower(); if (tn == node) - eq[eq.cnt()] = 1.75f; // Fake 1.75 Watts for now, to be changed to PM + eq[eq.cnt()] = power; return eq; } diff --git a/src/sim/sub_system.cc b/src/sim/sub_system.cc index 771590cf7..f5c0cc3f8 100644 --- a/src/sim/sub_system.cc +++ b/src/sim/sub_system.cc @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014 ARM Limited + * Copyright (c) 2014-2015 ARM Limited * All rights reserved * * The license below extends only to copyright in the software and shall @@ -37,8 +37,11 @@ * Authors: Geoffrey Blake */ +#include "sim/sub_system.hh" + #include "params/SubSystem.hh" #include "sim/sub_system.hh" +#include "sim/power/power_model.hh" #include "sim/power/thermal_domain.hh" SubSystem::SubSystem(const Params *p) @@ -49,6 +52,24 @@ SubSystem::SubSystem(const Params *p) p->thermal_domain->setSubSystem(this); } +double +SubSystem::getDynamicPower() const +{ + double ret = 0.0f; + for (auto &obj: powerProducers) + ret += obj->getDynamicPower(); + return ret; +} + +double +SubSystem::getStaticPower() const +{ + double ret = 0.0f; + for (auto &obj: powerProducers) + ret += obj->getStaticPower(); + return ret; +} + SubSystem * SubSystemParams::create() { diff --git a/src/sim/sub_system.hh b/src/sim/sub_system.hh index 6e35be676..ec25d7056 100644 --- a/src/sim/sub_system.hh +++ b/src/sim/sub_system.hh @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014 ARM Limited + * Copyright (c) 2014-2015 ARM Limited * All rights reserved * * The license below extends only to copyright in the software and shall @@ -45,10 +45,14 @@ #ifndef __SIM_SUB_SYSTEM_HH__ #define __SIM_SUB_SYSTEM_HH__ +#include + #include "params/SubSystem.hh" #include "sim/power/thermal_domain.hh" #include "sim/sim_object.hh" +class PowerModel; + /** * The SubSystem simobject does nothing, it is just a container for * other simobjects used by the configuration system @@ -58,6 +62,17 @@ class SubSystem : public SimObject public: typedef SubSystemParams Params; SubSystem(const Params *p); + + double getDynamicPower() const; + + double getStaticPower() const; + + void registerPowerProducer(PowerModel *pm) { + powerProducers.push_back(pm); + } + + protected: + std::vector powerProducers; }; #endif