diff --git a/SConstruct b/SConstruct index 8e850522f..1a2c53211 100755 --- a/SConstruct +++ b/SConstruct @@ -1110,6 +1110,10 @@ main.SConscript('ext/gzstream/SConscript', main.SConscript('ext/libfdt/SConscript', variant_dir = joinpath(build_root, 'libfdt')) +# fputils build is shared across all configs in the build root. +main.SConscript('ext/fputils/SConscript', + variant_dir = joinpath(build_root, 'fputils')) + ################################################### # # This function is used to set up a directory with switching headers diff --git a/ext/fputils/.gitignore b/ext/fputils/.gitignore new file mode 100644 index 000000000..a54a2403d --- /dev/null +++ b/ext/fputils/.gitignore @@ -0,0 +1,33 @@ +/tests/Makefile +/tests/Makefile.in +/tests/fp80_cvfd +/tests/fp80_cvtd +/tests/fp80_cvtf +/config.h +/config.h.in +/doxygen-doc +/Doxyfile +/Makefile.in +/Makefile +aclocal.m4 +autom4te.cache +compile +config.guess +config.log +config.status +config.sub +configure +depcomp +install-sh +libtool +ltmain.sh +missing +package.m5 +stamp-h1 +.deps +.libs +*.a +*.la +*.lo +*.o +*~ diff --git a/ext/fputils/AUTHORS b/ext/fputils/AUTHORS new file mode 100644 index 000000000..0f11b15dc --- /dev/null +++ b/ext/fputils/AUTHORS @@ -0,0 +1 @@ +Andreas Sandberg diff --git a/ext/fputils/COPYING b/ext/fputils/COPYING new file mode 100644 index 000000000..23f636b86 --- /dev/null +++ b/ext/fputils/COPYING @@ -0,0 +1,22 @@ +Copyright (c) 2013, Andreas Sandberg +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/ext/fputils/Doxyfile.in b/ext/fputils/Doxyfile.in new file mode 100644 index 000000000..f2cc851cf --- /dev/null +++ b/ext/fputils/Doxyfile.in @@ -0,0 +1,1792 @@ +# Doxyfile 1.8.1.2 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" "). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = "@PACKAGE_STRING@" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = @DX_DOCDIR@ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +SYMBOL_CACHE_SIZE = 0 + +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = @top_srcdir@/ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = *.c *.h + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = config.h + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C, C++ and Fortran comments will always remain visible. + +STRIP_CODE_COMMENTS = NO + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# style sheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# +# Qt Help Project / Custom Filters. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# +# Qt Help Project / Filter Attributes. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you may also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. +# However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = include/ + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50% before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/ext/fputils/INSTALL b/ext/fputils/INSTALL new file mode 100644 index 000000000..a1e89e18a --- /dev/null +++ b/ext/fputils/INSTALL @@ -0,0 +1,370 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/ext/fputils/Makefile.am b/ext/fputils/Makefile.am new file mode 100644 index 000000000..d635d0e36 --- /dev/null +++ b/ext/fputils/Makefile.am @@ -0,0 +1,19 @@ +ACLOCAL_AMFLAGS=-I m4 + +SUBDIRS=. tests + +MOSTLYCLEANFILES= + +lib_LTLIBRARIES = libfputils.la + +include_HEADERS = include/fputils/fp80.h + +libfputils_la_SOURCES = \ + include/fputils/fp80.h \ + fpbits.h \ + fp80.c + + +include $(top_srcdir)/doxygen.am + +MOSTLYCLEANFILES += $(DX_CLEANFILES) diff --git a/ext/fputils/SConscript b/ext/fputils/SConscript new file mode 100644 index 000000000..0d9f63adf --- /dev/null +++ b/ext/fputils/SConscript @@ -0,0 +1,40 @@ +# -*- mode:python -*- + +# Copyright (c) 2013 Andreas Sandberg +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are +# met: redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer; +# redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution; +# neither the name of the copyright holders nor the names of its +# contributors may be used to endorse or promote products derived from +# this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Authors: Andreas Sandberg + +Import('main') + +main.Library('fputils', [ + main.SharedObject('fp80.c'), + ]) + +main.Prepend(CPPPATH=Dir('./include')) +main.Append(LIBS=['fputils']) +main.Prepend(LIBPATH=[Dir('.')]) + diff --git a/ext/fputils/configure.in b/ext/fputils/configure.in new file mode 100644 index 000000000..59a21c18e --- /dev/null +++ b/ext/fputils/configure.in @@ -0,0 +1,32 @@ +AC_INIT(libfputils, 1.0, andreas@sandberg.pp.se) + +AC_CONFIG_MACRO_DIR([m4]) + +AM_INIT_AUTOMAKE([foreign -Wall -Werror]) + +DX_PDF_FEATURE(OFF) +DX_PS_FEATURE(OFF) +DX_MAN_FEATURE(OFF) +DX_INIT_DOXYGEN([libfputils]) + +AC_REQUIRE_AUX_FILE([tap-driver.sh]) + +AC_PROG_CC +AM_PROG_CC_C_O +AC_PROG_LIBTOOL +AC_PROG_AWK + +AM_CFLAGS="-Wall -Werror" +AM_CPPFLAGS="-I\$(abs_top_srcdir)/include" + +AC_SUBST(AM_CFLAGS) +AC_SUBST(AM_CPPFLAGS) + +AC_CONFIG_HEADERS([config.h]) + +AC_CONFIG_FILES([ \ + Doxyfile \ + Makefile \ + tests/Makefile \ +]) +AC_OUTPUT diff --git a/ext/fputils/doxygen.am b/ext/fputils/doxygen.am new file mode 100644 index 000000000..472de63b0 --- /dev/null +++ b/ext/fputils/doxygen.am @@ -0,0 +1,105 @@ +## --------------------------------- ## +## Format-independent Doxygen rules. ## +## --------------------------------- ## +if DX_COND_doc +## ------------------------------- ## +## Rules specific for HTML output. ## +## ------------------------------- ## +if DX_COND_html +DX_CLEAN_HTML = @DX_DOCDIR@/html +endif DX_COND_html +## ------------------------------ ## +## Rules specific for CHM output. ## +## ------------------------------ ## +if DX_COND_chm +DX_CLEAN_CHM = @DX_DOCDIR@/chm +if DX_COND_chi +DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi +endif DX_COND_chi +endif DX_COND_chm +## ------------------------------ ## +## Rules specific for MAN output. ## +## ------------------------------ ## +if DX_COND_man +DX_CLEAN_MAN = @DX_DOCDIR@/man +endif DX_COND_man +## ------------------------------ ## +## Rules specific for RTF output. ## +## ------------------------------ ## +if DX_COND_rtf +DX_CLEAN_RTF = @DX_DOCDIR@/rtf +endif DX_COND_rtf +## ------------------------------ ## +## Rules specific for XML output. ## +## ------------------------------ ## +if DX_COND_xml +DX_CLEAN_XML = @DX_DOCDIR@/xml +endif DX_COND_xml +## ----------------------------- ## +## Rules specific for PS output. ## +## ----------------------------- ## +if DX_COND_ps +DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps +DX_PS_GOAL = doxygen-ps +doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps +@DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag + cd @DX_DOCDIR@/latex; \ + rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ + $(DX_LATEX) refman.tex; \ + $(MAKEINDEX_PATH) refman.idx; \ + $(DX_LATEX) refman.tex; \ + countdown=5; \ + while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ + refman.log > /dev/null 2>&1 && test $$countdown -gt 0; do \ + $(DX_LATEX) refman.tex; \ + countdown=`expr $$countdown - 1`; \ + done; \ + $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi +endif DX_COND_ps +## ------------------------------ ## +## Rules specific for PDF output. ## +## ------------------------------ ## +if DX_COND_pdf +DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf +DX_PDF_GOAL = doxygen-pdf +doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf +@DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag + cd @DX_DOCDIR@/latex; \ + rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ + $(DX_PDFLATEX) refman.tex; \ + $(DX_MAKEINDEX) refman.idx; \ + $(DX_PDFLATEX) refman.tex; \ + countdown=5; \ + while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ + refman.log > /dev/null 2>&1 && test $$countdown -gt 0; do \ + $(DX_PDFLATEX) refman.tex; \ + countdown=`expr $$countdown - 1`; \ + done; \ + mv refman.pdf ../@PACKAGE@.pdf +endif DX_COND_pdf +## ------------------------------------------------- ## +## Rules specific for LaTeX (shared for PS and PDF). ## +## ------------------------------------------------- ## +if DX_COND_latex +DX_CLEAN_LATEX = @DX_DOCDIR@/latex +endif DX_COND_latex +.PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) +.INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) +doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag +doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) +@DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) + rm -rf @DX_DOCDIR@ + $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) +DX_CLEANFILES = \ + @DX_DOCDIR@/@PACKAGE@.tag \ + -r \ + $(DX_CLEAN_HTML) \ + $(DX_CLEAN_CHM) \ + $(DX_CLEAN_CHI) \ + $(DX_CLEAN_MAN) \ + $(DX_CLEAN_RTF) \ + $(DX_CLEAN_XML) \ + $(DX_CLEAN_PS) \ + $(DX_CLEAN_PDF) \ + $(DX_CLEAN_LATEX) +endif DX_COND_doc diff --git a/ext/fputils/fp80.c b/ext/fputils/fp80.c new file mode 100644 index 000000000..703b07ac9 --- /dev/null +++ b/ext/fputils/fp80.c @@ -0,0 +1,247 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "fpbits.h" + +#include +#include + +#include + +typedef union { + union { + uint64_t bits; + double value; + }; +} fp64_t; + + +const fp80_t fp80_pinf = BUILD_FP80(0, 0, FP80_EXP_SPECIAL); +const fp80_t fp80_ninf = BUILD_FP80(1, 0, FP80_EXP_SPECIAL); +const fp80_t fp80_qnan = BUILD_FP80(0, FP80_FRAC_QNAN, FP80_EXP_SPECIAL); +const fp80_t fp80_qnani = BUILD_FP80(1, FP80_FRAC_QNANI, FP80_EXP_SPECIAL); +const fp80_t fp80_snan = BUILD_FP80(0, FP80_FRAC_SNAN, FP80_EXP_SPECIAL); +const fp80_t fp80_nan = BUILD_FP80(0, FP80_FRAC_QNAN, FP80_EXP_SPECIAL); + +static const fp64_t fp64_pinf = BUILD_FP64(0, 0, FP64_EXP_SPECIAL); +static const fp64_t fp64_ninf = BUILD_FP64(1, 0, FP64_EXP_SPECIAL); +static const fp64_t fp64_qnan = BUILD_FP64(0, FP64_FRAC_QNAN, + FP64_EXP_SPECIAL); +static const fp64_t fp64_nqnan = BUILD_FP64(1, FP64_FRAC_QNAN, + FP64_EXP_SPECIAL); +static const fp64_t fp64_qnani = BUILD_FP64(1, FP64_FRAC_QNANI, + FP64_EXP_SPECIAL); +static const fp64_t fp64_snan = BUILD_FP64(0, FP64_FRAC_SNAN, + FP64_EXP_SPECIAL); +static const fp64_t fp64_nsnan = BUILD_FP64(1, FP64_FRAC_SNAN, + FP64_EXP_SPECIAL); + +static double +build_fp64(int sign, uint64_t frac, int exp) +{ + const fp64_t f = BUILD_FP64(sign, frac, exp); + + return f.value; +} + +int +fp80_sgn(fp80_t fp80) +{ + return (fp80.u.repr.se & FP80_SIGN_BIT) ? -1 : 1; +} + +int +fp80_isspecial(fp80_t fp80) +{ + const int exp = FP80_EXP(fp80); + + return exp == FP80_EXP_SPECIAL; +} + +int +fp80_isinf(fp80_t fp80) +{ + const uint64_t frac = FP80_FRAC(fp80); + + return fp80_isspecial(fp80) && frac == 0 ? fp80_sgn(fp80) : 0; +} + + +int +fp80_isqnan(fp80_t fp80) +{ + const uint64_t frac = FP80_FRAC(fp80); + + return fp80_isspecial(fp80) && (frac & FP80_QNAN_BIT); +} + +int +fp80_isqnani(fp80_t fp80) +{ + const uint64_t frac_low = fp80.u.repr.fi & (FP80_FRAC_MASK >> 1); + + return fp80_isqnan(fp80) && (fp80.u.repr.se & FP80_SIGN_BIT) && !frac_low; +} + +int +fp80_issnan(fp80_t fp80) +{ + const uint64_t frac = FP80_FRAC(fp80); + + return fp80_isspecial(fp80) && !(frac & FP80_QNAN_BIT) && frac; +} + +int +fp80_isfinite(fp80_t fp80) +{ + return !fp80_isnan(fp80) && !fp80_isinf(fp80); +} + +int +fp80_isnan(fp80_t fp80) +{ + return fp80_issnan(fp80) || fp80_isqnan(fp80) ? fp80_sgn(fp80) : 0; +} + +int +fp80_iszero(fp80_t fp80) +{ + return fp80.u.repr.fi == 0 && FP80_EXP(fp80) == 0 ? fp80_sgn(fp80) : 0; +} + +int +fp80_isnormal(fp80_t fp80) +{ + return FP80_EXP(fp80) != 0 && !fp80_isspecial(fp80) ? + fp80_sgn(fp80) : 0; +} + +int +fp80_issubnormal(fp80_t fp80) +{ + return FP80_FRAC(fp80) && FP80_EXP(fp80) == 0 ? fp80_sgn(fp80) : 0; +} + +int +fp80_classify(fp80_t fp80) +{ + if (fp80_issubnormal(fp80)) { + return FP_SUBNORMAL; + } else if (fp80_iszero(fp80)) { + return FP_ZERO; + } else if (fp80_isinf(fp80)) { + return FP_INFINITE; + } else if (fp80_isnan(fp80)) { + return FP_NAN; + } else { + assert(fp80_isfinite(fp80)); + return FP_NORMAL; + } +} + +double +fp80_cvtd(fp80_t fp80) +{ + const int sign = fp80.u.repr.se & FP80_SIGN_BIT; + + if (!fp80_isspecial(fp80)) { + const uint64_t frac = fp80.u.repr.fi; + const int unb_exp = FP80_EXP(fp80) - FP80_EXP_BIAS; + const int fp64_exp = unb_exp + FP64_EXP_BIAS; + const uint64_t fp64_frac = frac >> (FP80_FRAC_BITS - FP64_FRAC_BITS); + + if (fp64_exp > 0 && fp64_exp < FP64_EXP_SPECIAL) { + /* These numbers fall in the range of what we can express + * as normals */ + return build_fp64(sign, fp64_frac, fp64_exp); + } else if (fp64_exp <= 0) { + uint64_t fp64_denormal_frac = fp64_frac >> (-fp64_exp); + /* Generate a denormal or zero */ + return build_fp64(sign, fp64_denormal_frac, 0); + } else { + /* Infinity */ + return build_fp64(sign, 0, FP64_EXP_SPECIAL); + } + } else { + if (fp80_isinf(fp80)) { + return build_fp64(sign, 0, FP64_EXP_SPECIAL); + } else if (fp80_issnan(fp80)) { + return fp80_sgn(fp80) > 0 ? fp64_snan.value : fp64_nsnan.value; + } else if (fp80_isqnani(fp80)) { + return fp64_qnani.value; + } else { + assert(fp80_isqnan(fp80)); + return fp80_sgn(fp80) > 0 ? fp64_qnan.value : fp64_nqnan.value; + } + } +} + +fp80_t +fp80_cvfd(double value) +{ + const fp64_t fp64 = { .value = value }; + const uint64_t frac = FP64_FRAC(fp64); + const unsigned exp = FP64_EXP(fp64); + const int unb_exp = exp - FP64_EXP_BIAS; + const uint64_t fp80_frac = frac << (FP80_FRAC_BITS - FP64_FRAC_BITS); + + if (exp != 0) { + // Normal, inf, nan + const unsigned fp80_exp = exp == FP64_EXP_SPECIAL ? + FP80_EXP_SPECIAL : (unb_exp + FP80_EXP_BIAS); + const fp80_t fp80 = BUILD_FP80(fp64.bits & FP64_SIGN_BIT, + fp80_frac, fp80_exp); + return fp80; + } else if (exp == 0 && frac == 0) { + // Zero + const fp80_t fp80 = BUILD_FP80(fp64.bits & FP64_SIGN_BIT, 0, 0); + return fp80; + } else { + // Denormal + uint64_t fp80_fi = fp80_frac; + int shift_amt = 0; + while (!(fp80_fi & FP80_INT_BIT)) { + fp80_fi <<= 1; + ++shift_amt; + } + const unsigned fp80_exp = (unb_exp - shift_amt) + FP80_EXP_BIAS; + const fp80_t fp80 = BUILD_FP80(fp64.bits & FP64_SIGN_BIT, + fp80_fi, fp80_exp); + return fp80; + } +} + +void +fp80_debug_dump(FILE *fout, fp80_t fp80) +{ + fprintf(fout, "sgn: %i, int: %i, frac: 0x%llx, exp: 0x%x (%i)\n", + fp80_sgn(fp80), !!(fp80.u.repr.fi & FP80_INT_BIT), FP80_FRAC(fp80), + FP80_EXP(fp80), FP80_EXP(fp80) - FP80_EXP_BIAS); +} diff --git a/ext/fputils/fpbits.h b/ext/fputils/fpbits.h new file mode 100644 index 000000000..9fb934843 --- /dev/null +++ b/ext/fputils/fpbits.h @@ -0,0 +1,95 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FPBITS_H +#define _FPBITS_H + +#include + +#define FP80_FRAC_BITS 63 +#define FP80_INT_BIT 0x8000000000000000ULL +#define FP80_QNAN_BIT 0x4000000000000000ULL +#define FP80_FRAC_MASK 0x7fffffffffffffffULL +#define FP80_EXP_MASK 0x7fff +#define FP80_SIGN_BIT 0x8000 +#define FP80_EXP_BIAS 0x3fff + +#define FP80_EXP_SPECIAL 0x7fff +#define FP80_FRAC_SNAN 0x3fffffffffffffffULL +#define FP80_FRAC_QNAN 0x7fffffffffffffffULL +#define FP80_FRAC_QNANI 0x4000000000000000ULL + + +#define FP64_EXP_SHIFT 52 +#define FP64_FRAC_BITS 52 +#define FP64_SIGN_BIT 0x8000000000000000ULL +#define FP64_EXP_MASK 0x7ff0000000000000ULL +#define FP64_FRAC_MASK 0x000fffffffffffffULL +#define FP64_EXP_BIAS 0x3ff + +#define FP64_EXP_SPECIAL 0x7ff +#define FP64_FRAC_SNAN 0x0007ffffffffffffULL +#define FP64_FRAC_QNAN 0x000fffffffffffffULL +#define FP64_FRAC_QNANI 0x0008000000000000ULL + +#define BUILD_IFP64(sign, frac, exp) \ + ((sign) ? FP64_SIGN_BIT : 0) | \ + (((uint64_t)(exp) << FP64_EXP_SHIFT) & FP64_EXP_MASK) | \ + ((frac) & FP64_FRAC_MASK) + +#define BUILD_FP64(sign, frac, exp) \ + { .bits = BUILD_IFP64(sign, frac, exp) } + +#define BUILD_FP80_SE(sign, exp) \ + ((sign) ? FP80_SIGN_BIT : 0) | \ + ((exp) & FP80_EXP_MASK) + +#define BUILD_FP80_FI(frac, exp) \ + ((exp) ? FP80_INT_BIT : 0) | \ + ((frac) & FP80_FRAC_MASK) + +#define BUILD_FP80(sign, frac, exp) \ + { \ + .u.repr.se = BUILD_FP80_SE(sign, exp), \ + .u.repr.fi = BUILD_FP80_FI(frac, exp) \ + } + +#define FP80_FRAC(fp80) \ + (fp80.u.repr.fi & FP80_FRAC_MASK) + +#define FP80_EXP(fp80) \ + (fp80.u.repr.se & FP80_EXP_MASK) + +#define FP64_FRAC(fp64) \ + (fp64.bits & FP64_FRAC_MASK) + +#define FP64_EXP(fp80) \ + ((fp64.bits & FP64_EXP_MASK) >> FP64_EXP_SHIFT) + +#endif diff --git a/ext/fputils/include/fputils/fp80.h b/ext/fputils/include/fputils/fp80.h new file mode 100644 index 000000000..e584baab4 --- /dev/null +++ b/ext/fputils/include/fputils/fp80.h @@ -0,0 +1,253 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FP80_H +#define _FP80_H 1 + +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup fp80 80-bit Floats + * Functions handling 80-bit floats. + * + * @{ + */ + +/** Internal representation of an 80-bit float. */ +typedef struct { + union { + char bits[10]; + struct { + uint64_t fi; + uint16_t se; + } repr; + } u; +} fp80_t; + +/** Constant representing +inf */ +extern const fp80_t fp80_pinf; +/** Constant representing -inf */ +extern const fp80_t fp80_ninf; +/** Constant representing a quiet NaN */ +extern const fp80_t fp80_qnan; +/** Constant representing a quiet indefinite NaN */ +extern const fp80_t fp80_qnani; +/** Constant representing a signaling NaN */ +extern const fp80_t fp80_snan; +/** Alias for fp80_qnan */ +extern const fp80_t fp80_nan; + +/** + * Is the value a special floating point value? + * + * Determine if a floating point value is one of the special values + * (i.e., one of the infinities or NaNs). In practice, this function + * only checks if the exponent is set to the maximum value supported + * by the binary representation, which is a reserved value used for + * such special numbers. + * + * @param fp80 value to analyze. + * @return 1 if the value is special, 0 otherwise. + */ +int fp80_isspecial(fp80_t fp80); +/** + * Is the value a quiet NaN? + * + * @param fp80 value to analyze. + * @return 1 if true, 0 otherwise. + */ +int fp80_isqnan(fp80_t fp80); +/** + * Is the value an indefinite quiet NaN? + * + * @param fp80 value to analyze. + * @return 1 if true, 0 otherwise. + */ +int fp80_isqnani(fp80_t fp80); +/** + * Is the value a signaling NaN? + * + * @param fp80 value to analyze. + * @return 1 if true, 0 otherwise. + */ +int fp80_issnan(fp80_t fp80); + +/** + * Classify a floating point number. + * + * This function implements the same classification as the standard + * fpclassify() function. It returns one of the following floating + * point classes: + *
    + *
  • FP_NAN - The value is NaN. + *
  • FP_INFINITE - The value is either +inf or -inf. + *
  • FP_ZERO - The value is either +0 or -0. + *
  • FP_SUBNORMAL - The value is to small to be represented as a + * normalized float. See fp80_issubnormal(). + *
  • FP_NORMAL - The value is neither of above. + *
+ * + * @param fp80 value to analyze. + * @return Floating point classification. + */ +int fp80_classify(fp80_t fp80); + +/** + * Is a value finite? + * + * Check if a value is a finite value. That is, not one of the + * infinities or NaNs. + * + * @param fp80 value to analyze. + * @return -1 if negative finite, +1 if positive finite, 0 otherwise. + */ +int fp80_isfinite(fp80_t fp80); +/** + * Is the value a non-zero normal? + * + * This function checks if a floating point value is a normal (having + * an exponent larger or equal to 1) or not. See fp80_issubnormal() + * for a description of what a denormal value is. + * + * @see fp80_issubnormal() + * + * @param fp80 value to analyze. + * @return -1 if negative normal, +1 if positive normal, 0 otherwise. + */ +int fp80_isnormal(fp80_t fp80); +/** + * Is the value a NaN of any kind? + * + * @param fp80 value to analyze. + * @return -1 if negative NaN, +1 if positive NaN, 0 otherwise. + */ +int fp80_isnan(fp80_t fp80); +/** + * Is the value one of the infinities? + * + * @param fp80 value to analyze. + * @return -1 if -inf, +1 if +inf, 0 otherwise. + */ +int fp80_isinf(fp80_t fp80); +/** + * Determine value of the sign-bit of a floating point number. + * + * @note Floats can represent both positive and negative zeros. + * + * @param fp80 value to analyze. + * @return -1 if negative, +1 if positive. + */ +int fp80_sgn(fp80_t fp80); +/** + * Is the value zero? + * + * @param fp80 value to analyze. + * @return -1 if negative zero, +1 if positive zero, 0 otherwise. + */ +int fp80_iszero(fp80_t fp80); +/** + * Is the value a denormal? + * + * Numbers that are close to the minimum of what can be stored in a + * floating point number start loosing precision because bits in the + * fraction get used (implicitly) to store parts of the negative + * exponent (i.e., the exponent is saturated and the fraction is less + * than 1). Such numbers are known as denormals. This function checks + * whether a float is a denormal or not. + * + * @param fp80 value to analyze. + * @return -1 if negative denormal, +1 if positive denormal, 0 otherwise. + */ +int fp80_issubnormal(fp80_t fp80); + +/** + * Convert an 80-bit float to a 64-bit double. + * + * This function converts an 80-bit float into a standard 64-bit + * double. This conversion is inherently lossy since a double can only + * represent a subset of what an 80-bit float can represent. The + * fraction of the source value will always be truncated to fit the + * lower precision. If a value falls outside of the range that can be + * accurately represented by double by truncating the fraction, one of + * the following happens: + *
    + *
  • A denormal will be generated if that can approximate the + * value. + *
  • [-]0 will be generated if the magnitude of the value is too + * small to be represented at all. + *
  • +-Inf will be generated if the magnitude of the value is too + * large to be represented. + *
+ * + * NaN values will be preserved across the conversion. + * + * @param fp80 Source value to convert. + * @return 64-bit version of the float. + */ +double fp80_cvtd(fp80_t fp80); + +/** + * Convert an 64-bit double to an 80-bit float. + * + * This function converts a standard 64-bit double into an 80-bit + * float. This conversion is completely lossless since the 80-bit + * float represents a superset of what a 64-bit double can + * represent. + * + * @note Denormals will be converted to normalized values. + * + * @param fpd Source value to convert. + * @return 64-bit version of the float. + */ +fp80_t fp80_cvfd(double fpd); + +/** + * Dump the components of an 80-bit float to a file. + * + * @warning This function is intended for debugging and the format of + * the output is not guaranteed to be stable. + * + * @param fout Output stream (e.g., stdout) + * @param fp80 value to dump. + */ +void fp80_debug_dump(FILE *fout, fp80_t fp80); + +/** @} */ + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif diff --git a/ext/fputils/m4/ax_prog_doxygen.m4 b/ext/fputils/m4/ax_prog_doxygen.m4 new file mode 100644 index 000000000..44b22b00a --- /dev/null +++ b/ext/fputils/m4/ax_prog_doxygen.m4 @@ -0,0 +1,532 @@ +# =========================================================================== +# http://www.gnu.org/software/autoconf-archive/ax_prog_doxygen.html +# =========================================================================== +# +# SYNOPSIS +# +# DX_INIT_DOXYGEN(PROJECT-NAME, DOXYFILE-PATH, [OUTPUT-DIR]) +# DX_DOXYGEN_FEATURE(ON|OFF) +# DX_DOT_FEATURE(ON|OFF) +# DX_HTML_FEATURE(ON|OFF) +# DX_CHM_FEATURE(ON|OFF) +# DX_CHI_FEATURE(ON|OFF) +# DX_MAN_FEATURE(ON|OFF) +# DX_RTF_FEATURE(ON|OFF) +# DX_XML_FEATURE(ON|OFF) +# DX_PDF_FEATURE(ON|OFF) +# DX_PS_FEATURE(ON|OFF) +# +# DESCRIPTION +# +# The DX_*_FEATURE macros control the default setting for the given +# Doxygen feature. Supported features are 'DOXYGEN' itself, 'DOT' for +# generating graphics, 'HTML' for plain HTML, 'CHM' for compressed HTML +# help (for MS users), 'CHI' for generating a seperate .chi file by the +# .chm file, and 'MAN', 'RTF', 'XML', 'PDF' and 'PS' for the appropriate +# output formats. The environment variable DOXYGEN_PAPER_SIZE may be +# specified to override the default 'a4wide' paper size. +# +# By default, HTML, PDF and PS documentation is generated as this seems to +# be the most popular and portable combination. MAN pages created by +# Doxygen are usually problematic, though by picking an appropriate subset +# and doing some massaging they might be better than nothing. CHM and RTF +# are specific for MS (note that you can't generate both HTML and CHM at +# the same time). The XML is rather useless unless you apply specialized +# post-processing to it. +# +# The macros mainly control the default state of the feature. The use can +# override the default by specifying --enable or --disable. The macros +# ensure that contradictory flags are not given (e.g., +# --enable-doxygen-html and --enable-doxygen-chm, +# --enable-doxygen-anything with --disable-doxygen, etc.) Finally, each +# feature will be automatically disabled (with a warning) if the required +# programs are missing. +# +# Once all the feature defaults have been specified, call DX_INIT_DOXYGEN +# with the following parameters: a one-word name for the project for use +# as a filename base etc., an optional configuration file name (the +# default is 'Doxyfile', the same as Doxygen's default), and an optional +# output directory name (the default is 'doxygen-doc'). +# +# Automake Support +# +# The following is a template aminclude.am file for use with Automake. +# Make targets and variables values are controlled by the various +# DX_COND_* conditionals set by autoconf. +# +# The provided targets are: +# +# doxygen-doc: Generate all doxygen documentation. +# +# doxygen-run: Run doxygen, which will generate some of the +# documentation (HTML, CHM, CHI, MAN, RTF, XML) +# but will not do the post processing required +# for the rest of it (PS, PDF, and some MAN). +# +# doxygen-man: Rename some doxygen generated man pages. +# +# doxygen-ps: Generate doxygen PostScript documentation. +# +# doxygen-pdf: Generate doxygen PDF documentation. +# +# Note that by default these are not integrated into the automake targets. +# If doxygen is used to generate man pages, you can achieve this +# integration by setting man3_MANS to the list of man pages generated and +# then adding the dependency: +# +# $(man3_MANS): doxygen-doc +# +# This will cause make to run doxygen and generate all the documentation. +# +# The following variable is intended for use in Makefile.am: +# +# DX_CLEANFILES = everything to clean. +# +# Then add this variable to MOSTLYCLEANFILES. +# +# ----- begin aminclude.am ------------------------------------- +# +# ## --------------------------------- ## +# ## Format-independent Doxygen rules. ## +# ## --------------------------------- ## +# +# if DX_COND_doc +# +# ## ------------------------------- ## +# ## Rules specific for HTML output. ## +# ## ------------------------------- ## +# +# if DX_COND_html +# +# DX_CLEAN_HTML = @DX_DOCDIR@/html +# +# endif DX_COND_html +# +# ## ------------------------------ ## +# ## Rules specific for CHM output. ## +# ## ------------------------------ ## +# +# if DX_COND_chm +# +# DX_CLEAN_CHM = @DX_DOCDIR@/chm +# +# if DX_COND_chi +# +# DX_CLEAN_CHI = @DX_DOCDIR@/@PACKAGE@.chi +# +# endif DX_COND_chi +# +# endif DX_COND_chm +# +# ## ------------------------------ ## +# ## Rules specific for MAN output. ## +# ## ------------------------------ ## +# +# if DX_COND_man +# +# DX_CLEAN_MAN = @DX_DOCDIR@/man +# +# endif DX_COND_man +# +# ## ------------------------------ ## +# ## Rules specific for RTF output. ## +# ## ------------------------------ ## +# +# if DX_COND_rtf +# +# DX_CLEAN_RTF = @DX_DOCDIR@/rtf +# +# endif DX_COND_rtf +# +# ## ------------------------------ ## +# ## Rules specific for XML output. ## +# ## ------------------------------ ## +# +# if DX_COND_xml +# +# DX_CLEAN_XML = @DX_DOCDIR@/xml +# +# endif DX_COND_xml +# +# ## ----------------------------- ## +# ## Rules specific for PS output. ## +# ## ----------------------------- ## +# +# if DX_COND_ps +# +# DX_CLEAN_PS = @DX_DOCDIR@/@PACKAGE@.ps +# +# DX_PS_GOAL = doxygen-ps +# +# doxygen-ps: @DX_DOCDIR@/@PACKAGE@.ps +# +# @DX_DOCDIR@/@PACKAGE@.ps: @DX_DOCDIR@/@PACKAGE@.tag +# cd @DX_DOCDIR@/latex; \ +# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ +# $(DX_LATEX) refman.tex; \ +# $(MAKEINDEX_PATH) refman.idx; \ +# $(DX_LATEX) refman.tex; \ +# countdown=5; \ +# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ +# refman.log > /dev/null 2>&1 \ +# && test $$countdown -gt 0; do \ +# $(DX_LATEX) refman.tex; \ +# countdown=`expr $$countdown - 1`; \ +# done; \ +# $(DX_DVIPS) -o ../@PACKAGE@.ps refman.dvi +# +# endif DX_COND_ps +# +# ## ------------------------------ ## +# ## Rules specific for PDF output. ## +# ## ------------------------------ ## +# +# if DX_COND_pdf +# +# DX_CLEAN_PDF = @DX_DOCDIR@/@PACKAGE@.pdf +# +# DX_PDF_GOAL = doxygen-pdf +# +# doxygen-pdf: @DX_DOCDIR@/@PACKAGE@.pdf +# +# @DX_DOCDIR@/@PACKAGE@.pdf: @DX_DOCDIR@/@PACKAGE@.tag +# cd @DX_DOCDIR@/latex; \ +# rm -f *.aux *.toc *.idx *.ind *.ilg *.log *.out; \ +# $(DX_PDFLATEX) refman.tex; \ +# $(DX_MAKEINDEX) refman.idx; \ +# $(DX_PDFLATEX) refman.tex; \ +# countdown=5; \ +# while $(DX_EGREP) 'Rerun (LaTeX|to get cross-references right)' \ +# refman.log > /dev/null 2>&1 \ +# && test $$countdown -gt 0; do \ +# $(DX_PDFLATEX) refman.tex; \ +# countdown=`expr $$countdown - 1`; \ +# done; \ +# mv refman.pdf ../@PACKAGE@.pdf +# +# endif DX_COND_pdf +# +# ## ------------------------------------------------- ## +# ## Rules specific for LaTeX (shared for PS and PDF). ## +# ## ------------------------------------------------- ## +# +# if DX_COND_latex +# +# DX_CLEAN_LATEX = @DX_DOCDIR@/latex +# +# endif DX_COND_latex +# +# .PHONY: doxygen-run doxygen-doc $(DX_PS_GOAL) $(DX_PDF_GOAL) +# +# .INTERMEDIATE: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) +# +# doxygen-run: @DX_DOCDIR@/@PACKAGE@.tag +# +# doxygen-doc: doxygen-run $(DX_PS_GOAL) $(DX_PDF_GOAL) +# +# @DX_DOCDIR@/@PACKAGE@.tag: $(DX_CONFIG) $(pkginclude_HEADERS) +# rm -rf @DX_DOCDIR@ +# $(DX_ENV) $(DX_DOXYGEN) $(srcdir)/$(DX_CONFIG) +# +# DX_CLEANFILES = \ +# @DX_DOCDIR@/@PACKAGE@.tag \ +# -r \ +# $(DX_CLEAN_HTML) \ +# $(DX_CLEAN_CHM) \ +# $(DX_CLEAN_CHI) \ +# $(DX_CLEAN_MAN) \ +# $(DX_CLEAN_RTF) \ +# $(DX_CLEAN_XML) \ +# $(DX_CLEAN_PS) \ +# $(DX_CLEAN_PDF) \ +# $(DX_CLEAN_LATEX) +# +# endif DX_COND_doc +# +# ----- end aminclude.am --------------------------------------- +# +# LICENSE +# +# Copyright (c) 2009 Oren Ben-Kiki +# +# Copying and distribution of this file, with or without modification, are +# permitted in any medium without royalty provided the copyright notice +# and this notice are preserved. This file is offered as-is, without any +# warranty. + +#serial 12 + +## ----------## +## Defaults. ## +## ----------## + +DX_ENV="" +AC_DEFUN([DX_FEATURE_doc], ON) +AC_DEFUN([DX_FEATURE_dot], OFF) +AC_DEFUN([DX_FEATURE_man], OFF) +AC_DEFUN([DX_FEATURE_html], ON) +AC_DEFUN([DX_FEATURE_chm], OFF) +AC_DEFUN([DX_FEATURE_chi], OFF) +AC_DEFUN([DX_FEATURE_rtf], OFF) +AC_DEFUN([DX_FEATURE_xml], OFF) +AC_DEFUN([DX_FEATURE_pdf], ON) +AC_DEFUN([DX_FEATURE_ps], ON) + +## --------------- ## +## Private macros. ## +## --------------- ## + +# DX_ENV_APPEND(VARIABLE, VALUE) +# ------------------------------ +# Append VARIABLE="VALUE" to DX_ENV for invoking doxygen. +AC_DEFUN([DX_ENV_APPEND], [AC_SUBST([DX_ENV], ["$DX_ENV $1='$2'"])]) + +# DX_DIRNAME_EXPR +# --------------- +# Expand into a shell expression prints the directory part of a path. +AC_DEFUN([DX_DIRNAME_EXPR], + [[expr ".$1" : '\(\.\)[^/]*$' \| "x$1" : 'x\(.*\)/[^/]*$']]) + +# DX_IF_FEATURE(FEATURE, IF-ON, IF-OFF) +# ------------------------------------- +# Expands according to the M4 (static) status of the feature. +AC_DEFUN([DX_IF_FEATURE], [ifelse(DX_FEATURE_$1, ON, [$2], [$3])]) + +# DX_REQUIRE_PROG(VARIABLE, PROGRAM) +# ---------------------------------- +# Require the specified program to be found for the DX_CURRENT_FEATURE to work. +AC_DEFUN([DX_REQUIRE_PROG], [ +AC_PATH_TOOL([$1], [$2]) +if test "$DX_FLAG_[]DX_CURRENT_FEATURE$$1" = 1; then + AC_MSG_WARN([$2 not found - will not DX_CURRENT_DESCRIPTION]) + AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) +fi +]) + +# DX_TEST_FEATURE(FEATURE) +# ------------------------ +# Expand to a shell expression testing whether the feature is active. +AC_DEFUN([DX_TEST_FEATURE], [test "$DX_FLAG_$1" = 1]) + +# DX_CHECK_DEPEND(REQUIRED_FEATURE, REQUIRED_STATE) +# ------------------------------------------------- +# Verify that a required features has the right state before trying to turn on +# the DX_CURRENT_FEATURE. +AC_DEFUN([DX_CHECK_DEPEND], [ +test "$DX_FLAG_$1" = "$2" \ +|| AC_MSG_ERROR([doxygen-DX_CURRENT_FEATURE ifelse([$2], 1, + requires, contradicts) doxygen-DX_CURRENT_FEATURE]) +]) + +# DX_CLEAR_DEPEND(FEATURE, REQUIRED_FEATURE, REQUIRED_STATE) +# ---------------------------------------------------------- +# Turn off the DX_CURRENT_FEATURE if the required feature is off. +AC_DEFUN([DX_CLEAR_DEPEND], [ +test "$DX_FLAG_$1" = "$2" || AC_SUBST(DX_FLAG_[]DX_CURRENT_FEATURE, 0) +]) + +# DX_FEATURE_ARG(FEATURE, DESCRIPTION, +# CHECK_DEPEND, CLEAR_DEPEND, +# REQUIRE, DO-IF-ON, DO-IF-OFF) +# -------------------------------------------- +# Parse the command-line option controlling a feature. CHECK_DEPEND is called +# if the user explicitly turns the feature on (and invokes DX_CHECK_DEPEND), +# otherwise CLEAR_DEPEND is called to turn off the default state if a required +# feature is disabled (using DX_CLEAR_DEPEND). REQUIRE performs additional +# requirement tests (DX_REQUIRE_PROG). Finally, an automake flag is set and +# DO-IF-ON or DO-IF-OFF are called according to the final state of the feature. +AC_DEFUN([DX_ARG_ABLE], [ + AC_DEFUN([DX_CURRENT_FEATURE], [$1]) + AC_DEFUN([DX_CURRENT_DESCRIPTION], [$2]) + AC_ARG_ENABLE(doxygen-$1, + [AS_HELP_STRING(DX_IF_FEATURE([$1], [--disable-doxygen-$1], + [--enable-doxygen-$1]), + DX_IF_FEATURE([$1], [don't $2], [$2]))], + [ +case "$enableval" in +#( +y|Y|yes|Yes|YES) + AC_SUBST([DX_FLAG_$1], 1) + $3 +;; #( +n|N|no|No|NO) + AC_SUBST([DX_FLAG_$1], 0) +;; #( +*) + AC_MSG_ERROR([invalid value '$enableval' given to doxygen-$1]) +;; +esac +], [ +AC_SUBST([DX_FLAG_$1], [DX_IF_FEATURE([$1], 1, 0)]) +$4 +]) +if DX_TEST_FEATURE([$1]); then + $5 + : +fi +AM_CONDITIONAL(DX_COND_$1, DX_TEST_FEATURE([$1])) +if DX_TEST_FEATURE([$1]); then + $6 + : +else + $7 + : +fi +]) + +## -------------- ## +## Public macros. ## +## -------------- ## + +# DX_XXX_FEATURE(DEFAULT_STATE) +# ----------------------------- +AC_DEFUN([DX_DOXYGEN_FEATURE], [AC_DEFUN([DX_FEATURE_doc], [$1])]) +AC_DEFUN([DX_DOT_FEATURE], [AC_DEFUN([DX_FEATURE_dot], [$1])]) +AC_DEFUN([DX_MAN_FEATURE], [AC_DEFUN([DX_FEATURE_man], [$1])]) +AC_DEFUN([DX_HTML_FEATURE], [AC_DEFUN([DX_FEATURE_html], [$1])]) +AC_DEFUN([DX_CHM_FEATURE], [AC_DEFUN([DX_FEATURE_chm], [$1])]) +AC_DEFUN([DX_CHI_FEATURE], [AC_DEFUN([DX_FEATURE_chi], [$1])]) +AC_DEFUN([DX_RTF_FEATURE], [AC_DEFUN([DX_FEATURE_rtf], [$1])]) +AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) +AC_DEFUN([DX_XML_FEATURE], [AC_DEFUN([DX_FEATURE_xml], [$1])]) +AC_DEFUN([DX_PDF_FEATURE], [AC_DEFUN([DX_FEATURE_pdf], [$1])]) +AC_DEFUN([DX_PS_FEATURE], [AC_DEFUN([DX_FEATURE_ps], [$1])]) + +# DX_INIT_DOXYGEN(PROJECT, [CONFIG-FILE], [OUTPUT-DOC-DIR]) +# --------------------------------------------------------- +# PROJECT also serves as the base name for the documentation files. +# The default CONFIG-FILE is "Doxyfile" and OUTPUT-DOC-DIR is "doxygen-doc". +AC_DEFUN([DX_INIT_DOXYGEN], [ + +# Files: +AC_SUBST([DX_PROJECT], [$1]) +AC_SUBST([DX_CONFIG], [ifelse([$2], [], Doxyfile, [$2])]) +AC_SUBST([DX_DOCDIR], [ifelse([$3], [], doxygen-doc, [$3])]) + +# Environment variables used inside doxygen.cfg: +DX_ENV_APPEND(SRCDIR, $srcdir) +DX_ENV_APPEND(PROJECT, $DX_PROJECT) +DX_ENV_APPEND(DOCDIR, $DX_DOCDIR) +DX_ENV_APPEND(VERSION, $PACKAGE_VERSION) + +# Doxygen itself: +DX_ARG_ABLE(doc, [generate any doxygen documentation], + [], + [], + [DX_REQUIRE_PROG([DX_DOXYGEN], doxygen) + DX_REQUIRE_PROG([DX_PERL], perl)], + [DX_ENV_APPEND(PERL_PATH, $DX_PERL)]) + +# Dot for graphics: +DX_ARG_ABLE(dot, [generate graphics for doxygen documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_DOT], dot)], + [DX_ENV_APPEND(HAVE_DOT, YES) + DX_ENV_APPEND(DOT_PATH, [`DX_DIRNAME_EXPR($DX_DOT)`])], + [DX_ENV_APPEND(HAVE_DOT, NO)]) + +# Man pages generation: +DX_ARG_ABLE(man, [generate doxygen manual pages], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [], + [DX_ENV_APPEND(GENERATE_MAN, YES)], + [DX_ENV_APPEND(GENERATE_MAN, NO)]) + +# RTF file generation: +DX_ARG_ABLE(rtf, [generate doxygen RTF documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [], + [DX_ENV_APPEND(GENERATE_RTF, YES)], + [DX_ENV_APPEND(GENERATE_RTF, NO)]) + +# XML file generation: +DX_ARG_ABLE(xml, [generate doxygen XML documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [], + [DX_ENV_APPEND(GENERATE_XML, YES)], + [DX_ENV_APPEND(GENERATE_XML, NO)]) + +# (Compressed) HTML help generation: +DX_ARG_ABLE(chm, [generate doxygen compressed HTML help documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_HHC], hhc)], + [DX_ENV_APPEND(HHC_PATH, $DX_HHC) + DX_ENV_APPEND(GENERATE_HTML, YES) + DX_ENV_APPEND(GENERATE_HTMLHELP, YES)], + [DX_ENV_APPEND(GENERATE_HTMLHELP, NO)]) + +# Seperate CHI file generation. +DX_ARG_ABLE(chi, [generate doxygen seperate compressed HTML help index file], + [DX_CHECK_DEPEND(chm, 1)], + [DX_CLEAR_DEPEND(chm, 1)], + [], + [DX_ENV_APPEND(GENERATE_CHI, YES)], + [DX_ENV_APPEND(GENERATE_CHI, NO)]) + +# Plain HTML pages generation: +DX_ARG_ABLE(html, [generate doxygen plain HTML documentation], + [DX_CHECK_DEPEND(doc, 1) DX_CHECK_DEPEND(chm, 0)], + [DX_CLEAR_DEPEND(doc, 1) DX_CLEAR_DEPEND(chm, 0)], + [], + [DX_ENV_APPEND(GENERATE_HTML, YES)], + [DX_TEST_FEATURE(chm) || DX_ENV_APPEND(GENERATE_HTML, NO)]) + +# PostScript file generation: +DX_ARG_ABLE(ps, [generate doxygen PostScript documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_LATEX], latex) + DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) + DX_REQUIRE_PROG([DX_DVIPS], dvips) + DX_REQUIRE_PROG([DX_EGREP], egrep)]) + +# PDF file generation: +DX_ARG_ABLE(pdf, [generate doxygen PDF documentation], + [DX_CHECK_DEPEND(doc, 1)], + [DX_CLEAR_DEPEND(doc, 1)], + [DX_REQUIRE_PROG([DX_PDFLATEX], pdflatex) + DX_REQUIRE_PROG([DX_MAKEINDEX], makeindex) + DX_REQUIRE_PROG([DX_EGREP], egrep)]) + +# LaTeX generation for PS and/or PDF: +AM_CONDITIONAL(DX_COND_latex, DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf)) +if DX_TEST_FEATURE(ps) || DX_TEST_FEATURE(pdf); then + DX_ENV_APPEND(GENERATE_LATEX, YES) +else + DX_ENV_APPEND(GENERATE_LATEX, NO) +fi + +# Paper size for PS and/or PDF: +AC_ARG_VAR(DOXYGEN_PAPER_SIZE, + [a4wide (default), a4, letter, legal or executive]) +case "$DOXYGEN_PAPER_SIZE" in +#( +"") + AC_SUBST(DOXYGEN_PAPER_SIZE, "") +;; #( +a4wide|a4|letter|legal|executive) + DX_ENV_APPEND(PAPER_SIZE, $DOXYGEN_PAPER_SIZE) +;; #( +*) + AC_MSG_ERROR([unknown DOXYGEN_PAPER_SIZE='$DOXYGEN_PAPER_SIZE']) +;; +esac + +#For debugging: +#echo DX_FLAG_doc=$DX_FLAG_doc +#echo DX_FLAG_dot=$DX_FLAG_dot +#echo DX_FLAG_man=$DX_FLAG_man +#echo DX_FLAG_html=$DX_FLAG_html +#echo DX_FLAG_chm=$DX_FLAG_chm +#echo DX_FLAG_chi=$DX_FLAG_chi +#echo DX_FLAG_rtf=$DX_FLAG_rtf +#echo DX_FLAG_xml=$DX_FLAG_xml +#echo DX_FLAG_pdf=$DX_FLAG_pdf +#echo DX_FLAG_ps=$DX_FLAG_ps +#echo DX_ENV=$DX_ENV +]) diff --git a/ext/fputils/tests/Makefile.am b/ext/fputils/tests/Makefile.am new file mode 100644 index 000000000..6faffead2 --- /dev/null +++ b/ext/fputils/tests/Makefile.am @@ -0,0 +1,13 @@ + +TEST_LOG_DRIVER = env AM_TAP_AWK='$(AWK)' $(SHELL) \ + $(top_srcdir)/tap-driver.sh + +LIBS=-lm $(top_builddir)/.libs/libfputils.la libtest.a + +FP80_TESTS=fp80_cvtd fp80_cvfd fp80_cvtf +TESTS=$(FP80_TESTS) + +check_LIBRARIES=libtest.a +check_PROGRAMS=$(FP80_TESTS) + +libtest_a_SOURCES=test_helper.c test_helper.h diff --git a/ext/fputils/tests/fp80_cvfd.c b/ext/fputils/tests/fp80_cvfd.c new file mode 100644 index 000000000..d4980287a --- /dev/null +++ b/ext/fputils/tests/fp80_cvfd.c @@ -0,0 +1,120 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +#include "test_helper.h" + +#include +#include +#include +#include + +static void +test_cvfd_class(const char *name, double fin) +{ + test_diag("converting '%e' -> fp80...", fin); + fp80_t v = fp80_cvfd(fin); + int class_ok; + int fp64_class = fpclassify(fin); + int class = fp64_class == FP_SUBNORMAL ? FP_NORMAL : fp64_class; + int fp80_class = fp80_classify(v); + + printf("# "); + fp80_debug_dump(stdout, v); + test_diag("isnan: %i, isinf: %i, iszero: %i, isnormal: %i, issubnormal: %i", + fp80_isnan(v), fp80_isinf(v), fp80_iszero(v), + fp80_isnormal(v), fp80_issubnormal(v)); + test_diag("class(fp64): %i, expected class: %i, class(fp80): %i", + fp64_class, class, fp80_classify(v)); + switch (class) { + case FP_NAN: + class_ok = fp80_isnan(v) && !fp80_isinf(v) && !fp80_iszero(v) && + !fp80_isnormal(v) && !fp80_issubnormal(v); + break; + + case FP_INFINITE: + class_ok = !fp80_isnan(v) && fp80_isinf(v) && !fp80_iszero(v) && + !fp80_isnormal(v) && !fp80_issubnormal(v); + break; + case FP_ZERO: + class_ok = !fp80_isnan(v) && !fp80_isinf(v) && fp80_iszero(v) && + !fp80_isnormal(v) && !fp80_issubnormal(v); + break; + + case FP_SUBNORMAL: + class_ok = !fp80_isnan(v) && !fp80_isinf(v) && !fp80_iszero(v) && + !fp80_isnormal(v) && fp80_issubnormal(v); + break; + + case FP_NORMAL: + class_ok = !fp80_isnan(v) && !fp80_isinf(v) && !fp80_iszero(v) && + fp80_isnormal(v) && !fp80_issubnormal(v); + break; + + default: + test_bail("unexpected FP class (%i)", class); + } + + if (!class_ok) { + test_diag("inconsistent classification"); + test_fail(name); + } else if (fp80_class != class) { + test_diag("class mismatch"); + test_fail(name); + } else { + test_ok(name); + } +} + +static void +test_cvfd_class_exp(const char *name, double x, int exp) +{ + double val = ldexp(x, exp); + test_cvfd_class(name, val); +} + +int +main(int argc, char *argv[]) +{ + test_init(9); + + test_cvfd_class("double->fp80 +inf", -INFINITY); + test_cvfd_class("double->fp80 -inf", INFINITY); + test_cvfd_class("double->fp80 +nan", NAN); + test_cvfd_class("double->fp80 -nan", -NAN); + test_cvfd_class("double->fp80 +0", 0); + test_cvfd_class("double->fp80 PI", M_PI); + + test_cvfd_class_exp("double->fp80 smallest normal", 1.0, -1022); + test_cvfd_class_exp("double->fp80 denormal1", 0.5, -1022); + test_cvfd_class_exp("double->fp80 denormal2", 0.25, -1022); + + test_exit(); +} diff --git a/ext/fputils/tests/fp80_cvtd.c b/ext/fputils/tests/fp80_cvtd.c new file mode 100644 index 000000000..425a5c44a --- /dev/null +++ b/ext/fputils/tests/fp80_cvtd.c @@ -0,0 +1,75 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +#include "test_helper.h" + +#include +#include +#include + +static void +test_fp80_cvtd_class(const char *name, fp80_t fin, int class) +{ + double d = fp80_cvtd(fin); + if (fpclassify(d) != class) { + test_diag("wrong class"); + test_fail(name); + } else { + test_ok(name); + } +} + +static void +test_fp80_cvtd_inf(const char *name, fp80_t fin, int inf_class) +{ + double d = fp80_cvtd(fin); + if (isinf(d) != inf_class) { + test_diag("wrong infinity type"); + test_fail(name); + } else { + test_ok(name); + } +} + +int +main(int argc, char *argv[]) +{ + test_init(6); + + test_fp80_cvtd_inf("fp80->double +inf", fp80_pinf, 1); + test_fp80_cvtd_inf("fp80->double -inf", fp80_ninf, -1); + test_fp80_cvtd_class("fp80->double qnan", fp80_qnan, FP_NAN); + test_fp80_cvtd_class("fp80->double qnani", fp80_qnani, FP_NAN); + test_fp80_cvtd_class("fp80->double snan", fp80_snan, FP_NAN); + test_fp80_cvtd_class("fp80->double nan", fp80_nan, FP_NAN); + + test_exit(); +} diff --git a/ext/fputils/tests/fp80_cvtf.c b/ext/fputils/tests/fp80_cvtf.c new file mode 100644 index 000000000..0edfb2ded --- /dev/null +++ b/ext/fputils/tests/fp80_cvtf.c @@ -0,0 +1,82 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +#include "test_helper.h" + +#include +#include +#include +#include + +static void +test_cvtf(const char *name, double fin) +{ + fp80_t v80 = fp80_cvfd(fin); + double v64 = fp80_cvtd(v80); + + test_diag("Conversion '%e' -> fp80 -> double: %e", fin, v64); + + printf("# "); + fp80_debug_dump(stdout, v80); + if (v64 == fin || + (isnan(fin) && isnan(v64) && signbit(fin) == signbit(v64))) { + test_ok(name); + } else { + test_diag("MISMATCH: %e != %e", fin, v64); + test_fail(name); + } +} + +static void +test_cvtf_exp(const char *name, double x, int exp) +{ + double val = ldexp(x, exp); + test_cvtf(name, val); +} + +int +main(int argc, char *argv[]) +{ + test_init(9); + + test_cvtf("+inf", -INFINITY); + test_cvtf("-inf", INFINITY); + test_cvtf("+nan", NAN); + test_cvtf("-nan", -NAN); + test_cvtf("+0", 0); + test_cvtf("PI", M_PI); + + test_cvtf_exp("smallest normal", 1.0, -1022); + test_cvtf_exp("denormal1", 0.5, -1022); + test_cvtf_exp("denormal2", 0.25, -1022); + + test_exit(); +} diff --git a/ext/fputils/tests/test_helper.c b/ext/fputils/tests/test_helper.c new file mode 100644 index 000000000..f2da28a04 --- /dev/null +++ b/ext/fputils/tests/test_helper.c @@ -0,0 +1,157 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "test_helper.h" + +#include +#include +#include + +unsigned test_current = 0; +unsigned test_count = 0; +unsigned test_fail_count = 0; + +void +test_init(unsigned no_tests) +{ + assert(test_count == 0 && test_current == 0); + + test_count = no_tests; + test_current = 1; + test_fail_count = 0; + + printf("1..%u\n", no_tests); +} + +void +test_exit() +{ + if (test_fail_count) + exit(EXIT_FAILURE); + else + exit(EXIT_SUCCESS); +} + +void +test_bail(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + printf("Bail out! "); + vprintf(fmt, ap); + printf("\n"); + + va_end(ap); + + exit(EXIT_FAILURE); +} + +void +test_diag(const char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + + printf("# "); + vprintf(fmt, ap); + printf("\n"); + + va_end(ap); +} + +static void +test_vstatus(const char *status, const char *test, + const char *directive, + const char *fmt_why, va_list ap) +{ + printf("%s %i", status, test_current); + + if (test && test[0] != '\0') + printf(" - %s", test); + + if (directive && directive[0] != '\0') { + printf(" # %s ", directive); + if (fmt_why && fmt_why[0] != '\0') + vprintf(fmt_why, ap); + } + printf("\n"); + + ++test_current; +} + +static void __attribute__((format (printf, 4, 5))) +test_status(const char *status, const char *test, + const char *directive, + const char *fmt_why, ...) +{ + va_list ap; + va_start(ap, fmt_why); + + test_vstatus(status, test, directive, fmt_why, ap); + + va_end(ap); +} + +void +test_ok(const char *test) +{ + test_status("ok", test, NULL, NULL); +} + +void +test_fail(const char *test) +{ + test_status("not ok", test, NULL, NULL); + ++test_fail_count; +} + +void +test_skip(const char *test, const char *fmt_why, ...) +{ + va_list ap; + va_start(ap, fmt_why); + + test_vstatus("ok", test, "SKIP", fmt_why, ap); + + va_end(ap); +} + +void +test_todo(const char *test, const char *fmt_why, ...) +{ + va_list ap; + va_start(ap, fmt_why); + + test_vstatus("not ok", test, "TODO", fmt_why, ap); + + va_end(ap); + + ++test_fail_count; +} diff --git a/ext/fputils/tests/test_helper.h b/ext/fputils/tests/test_helper.h new file mode 100644 index 000000000..1b090189a --- /dev/null +++ b/ext/fputils/tests/test_helper.h @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2013, Andreas Sandberg + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _TEST_HELPER +#define _TEST_HELPER 1 + +#include + +extern unsigned test_current; +extern unsigned test_count; +extern unsigned test_fail_count; + +void test_init(unsigned no_tests); +void test_exit() + __attribute__((noreturn)); + +void test_bail(const char *fmt, ...) + __attribute__((format (printf, 1, 2), noreturn)); + +void test_diag(const char *fmt, ...) + __attribute__((format (printf, 1, 2))); + +void test_ok(const char *test); + +void test_fail(const char *test); + +void test_skip(const char *test, const char *fmt_why, ...) + __attribute__((format (printf, 2, 3))); + +void test_todo(const char *test, const char *fmt_why, ...) + __attribute__((format (printf, 2, 3))); + +#endif