sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

stats: Bump stats after Minor switcheroo inclusion

Browse source
This commit is contained in:
Andreas Sandberg 2015-07-30 10:16:36 +01:00
parent decd6b958e
commit c50e429001
9 changed files with 7833 additions and 5882 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1103
tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-full/config.ini
View file

File diff suppressed because it is too large Load diff

81
tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-full/simerr
View file

@ -12,10 +12,12 @@ warn: instruction 'mcr dccmvau' unimplemented
warn: instruction 'mcr icimvau' unimplemented
warn: instruction 'mcr bpiallis' unimplemented
warn: instruction 'mcr icialluis' unimplemented
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: instruction 'mcr dccimvac' unimplemented
warn: Tried to read RealView I/O at offset 0x60 that doesn't exist
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
warn: Tried to write RVIO at offset 0xa8 (data 0) that doesn't exist
@ -29,6 +31,8 @@ WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: CP14 unimplemented crn[1], opc1[0], crm[1], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[3], opc2[4]
warn: CP14 unimplemented crn[1], opc1[0], crm[0], opc2[4]
@ -38,21 +42,19 @@ WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: Bank is already active!
Command: 0, Timestamp: 7330, Bank: 4
WARNING: Bank is already active!
Command: 0, Timestamp: 9347, Bank: 3
WARNING: Bank is already active!
Command: 0, Timestamp: 9490, Bank: 2
warn: CP14 unimplemented crn[5], opc1[4], crm[0], opc2[0]
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: Bank is not active!
Command: 1, Timestamp: 3080, Bank: 4
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: Bank is already active!
Command: 0, Timestamp: 6448, Bank: 2
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: Returning zero for read from miscreg pmcr
@ -64,12 +66,11 @@ WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: CP14 unimplemented crn[6], opc1[5], crm[0], opc2[2]
warn: CP14 unimplemented crn[0], opc1[4], crm[0], opc2[2]
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: CP14 unimplemented crn[10], opc1[0], crm[4], opc2[3]
warn: CP14 unimplemented crn[0], opc1[4], crm[12], opc2[2]
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
@ -81,48 +82,8 @@ WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: CP14 unimplemented crn[2], opc1[2], crm[0], opc2[2]
warn: instruction 'mcr bpiall' unimplemented
warn: instruction 'mcr dcisw' unimplemented
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: Bank is already active!
Command: 0, Timestamp: 6533, Bank: 1
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
@ -147,3 +108,21 @@ WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
warn: User mode does not have SPSR
WARNING: One or more banks are active! REF requires all banks to be precharged.
Command: 4, Timestamp: 12458, Bank: 0

11
tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-full/simout
View file

@ -1,12 +1,9 @@
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
gem5 compiled Apr 22 2015 10:58:25
gem5 started Apr 22 2015 12:26:21
gem5 executing on phenom
command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview-switcheroo-full -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview-switcheroo-full
gem5 compiled Jul 29 2015 17:36:13
gem5 started Jul 29 2015 17:36:59
gem5 executing on e104799-lin
command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview-switcheroo-full -re /work/gem5/outgoing/gem5_3/tests/run.py build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview-switcheroo-full
Global frequency set at 1000000000000 ticks per second
0: system.cpu0.isa: ISA system set to: 0x305ef00 0x305ef00
0: system.cpu1.isa: ISA system set to: 0x305ef00 0x305ef00
0: system.cpu2.isa: ISA system set to: 0x305ef00 0x305ef00

4500
tests/long/fs/10.linux-boot/ref/arm/linux/realview-switcheroo-full/stats.txt
View file

File diff suppressed because it is too large Load diff

1103
tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-full/config.ini
View file

File diff suppressed because it is too large Load diff

1660
tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-full/simerr
View file

File diff suppressed because it is too large Load diff

11
tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-full/simout
View file

@ -1,13 +1,10 @@
gem5 Simulator System. http://gem5.org
gem5 is copyrighted software; use the --copyright option for details.
gem5 compiled Apr 22 2015 10:58:25
gem5 started Apr 22 2015 14:18:06
gem5 executing on phenom
command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview64-switcheroo-full -re /home/stever/hg/m5sim.org/gem5/tests/run.py build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview64-switcheroo-full
gem5 compiled Jul 29 2015 17:36:13
gem5 started Jul 29 2015 18:34:05
gem5 executing on e104799-lin
command line: build/ARM/gem5.opt -d build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview64-switcheroo-full -re /work/gem5/outgoing/gem5_3/tests/run.py build/ARM/tests/opt/long/fs/10.linux-boot/arm/linux/realview64-switcheroo-full
Selected 64-bit ARM architecture, updating default disk image...
Global frequency set at 1000000000000 ticks per second
0: system.cpu0.isa: ISA system set to: 0x47f6c80 0x47f6c80
0: system.cpu1.isa: ISA system set to: 0x47f6c80 0x47f6c80
0: system.cpu2.isa: ISA system set to: 0x47f6c80 0x47f6c80

4996
tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-full/stats.txt
View file

File diff suppressed because it is too large Load diff

250
tests/long/fs/10.linux-boot/ref/arm/linux/realview64-switcheroo-full/system.terminal
View file

@ -32,135 +32,135 @@
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 100.00MHz (phys).
[ 0.000000] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 2748779069440ns
[ 0.000013] Console: colour dummy device 80x25
[ 0.000014] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
[ 0.000015] pid_max: default: 32768 minimum: 301
[ 0.000022] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000023] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000066] hw perfevents: no hardware support available
[ 1.060050] CPU1: failed to come online
[ 2.080101] CPU2: failed to come online
[ 3.100152] CPU3: failed to come online
[ 3.100153] Brought up 1 CPUs
[ 3.100154] SMP: Total of 1 processors activated.
[ 3.100181] devtmpfs: initialized
[ 3.100715] atomic64_test: passed
[ 3.100742] regulator-dummy: no parameters
[ 3.100963] NET: Registered protocol family 16
[ 3.101057] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
[ 3.101060] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
[ 3.101099] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
[ 3.101101] Serial: AMBA PL011 UART driver
[ 3.101342] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
[ 3.101409] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
[ 3.101679] console [ttyAMA0] enabled
[ 3.101713] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
[ 3.101727] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
[ 3.101741] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
[ 3.101754] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
[ 3.130360] 3V3: 3300 mV
[ 3.130381] vgaarb: loaded
[ 3.130421] SCSI subsystem initialized
[ 3.130490] libata version 3.00 loaded.
[ 3.130570] usbcore: registered new interface driver usbfs
[ 0.000027] Console: colour dummy device 80x25
[ 0.000030] Calibrating delay loop (skipped) preset value.. 3997.69 BogoMIPS (lpj=19988480)
[ 0.000032] pid_max: default: 32768 minimum: 301
[ 0.000047] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000048] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
[ 0.000169] hw perfevents: no hardware support available
[ 1.060045] CPU1: failed to come online
[ 2.080096] CPU2: failed to come online
[ 3.100147] CPU3: failed to come online
[ 3.100148] Brought up 1 CPUs
[ 3.100149] SMP: Total of 1 processors activated.
[ 3.100176] devtmpfs: initialized
[ 3.100788] atomic64_test: passed
[ 3.100845] regulator-dummy: no parameters
[ 3.101102] NET: Registered protocol family 16
[ 3.101191] vdso: 2 pages (1 code, 1 data) at base ffffffc0006cd000
[ 3.101195] hw-breakpoint: found 2 breakpoint and 2 watchpoint registers.
[ 3.101234] software IO TLB [mem 0x8d400000-0x8d800000] (4MB) mapped at [ffffffc00d400000-ffffffc00d7fffff]
[ 3.101235] Serial: AMBA PL011 UART driver
[ 3.101357] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/sysctl@020000
[ 3.101379] 1c090000.uart: ttyAMA0 at MMIO 0x1c090000 (irq = 37, base_baud = 0) is a PL011 rev3
[ 3.101541] console [ttyAMA0] enabled
[ 3.101668] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0a0000
[ 3.101706] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0b0000
[ 3.101743] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/uart@0c0000
[ 3.101777] of_amba_device_create(): amba_device_add() failed (-19) for /smb/motherboard/iofpga@3,00000000/wdt@0f0000
[ 3.130355] 3V3: 3300 mV
[ 3.130376] vgaarb: loaded
[ 3.130417] SCSI subsystem initialized
[ 3.130486] libata version 3.00 loaded.
[ 3.130569] usbcore: registered new interface driver usbfs
[ 3.130596] usbcore: registered new interface driver hub
[ 3.130650] usbcore: registered new device driver usb
[ 3.130669] pps_core: LinuxPPS API ver. 1 registered
[ 3.130677] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.130694] PTP clock support registered
[ 3.130766] Switched to clocksource arch_sys_counter
[ 3.131600] NET: Registered protocol family 2
[ 3.131646] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 3.131660] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 3.131666] TCP: Hash tables configured (established 2048 bind 2048)
[ 3.131669] TCP: reno registered
[ 3.131670] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.131673] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.131687] NET: Registered protocol family 1
[ 3.131717] RPC: Registered named UNIX socket transport module.
[ 3.131718] RPC: Registered udp transport module.
[ 3.131719] RPC: Registered tcp transport module.
[ 3.131720] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.131721] PCI: CLS 0 bytes, default 64
[ 3.131820] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.131862] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.133297] fuse init (API version 7.23)
[ 3.133349] msgmni has been set to 469
[ 3.135215] io scheduler noop registered
[ 3.135250] io scheduler cfq registered (default)
[ 3.135478] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
[ 3.135480] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.135481] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
[ 3.135483] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.135484] pci_bus 0000:00: scanning bus
[ 3.135486] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
[ 3.135488] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
[ 3.135491] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 3.135508] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
[ 3.135510] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
[ 3.135511] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
[ 3.135513] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
[ 3.135515] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
[ 3.135516] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
[ 3.135518] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 3.135536] pci_bus 0000:00: fixups for bus
[ 3.135537] pci_bus 0000:00: bus scan returning with max=00
[ 3.135539] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
[ 3.135543] pci 0000:00:00.0: fixup irq: got 33
[ 3.135545] pci 0000:00:00.0: assigning IRQ 33
[ 3.135547] pci 0000:00:01.0: fixup irq: got 34
[ 3.135549] pci 0000:00:01.0: assigning IRQ 34
[ 3.135551] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
[ 3.135553] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
[ 3.135554] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
[ 3.135556] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
[ 3.135558] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
[ 3.135559] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
[ 3.135561] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
[ 3.135563] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
[ 3.136019] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.136176] ata_piix 0000:00:01.0: version 2.13
[ 3.136185] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
[ 3.136198] ata_piix 0000:00:01.0: enabling bus mastering
[ 3.136386] scsi0 : ata_piix
[ 3.136441] scsi1 : ata_piix
[ 3.136483] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
[ 3.136496] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
[ 3.136684] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.136696] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.136709] e1000 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.136719] e1000 0000:00:00.0: enabling bus mastering
[ 3.290771] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
[ 3.290772] ata1.00: 2096640 sectors, multi 0: LBA
[ 3.290779] ata1.00: configured for UDMA/33
[ 3.290796] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
[ 3.290857] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.290865] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
[ 3.290879] sd 0:0:0:0: [sda] Write Protect is off
[ 3.290880] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.290887] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.290940] sda: sda1
[ 3.291002] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.411060] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
[ 3.411075] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.411103] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.411114] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.411144] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 3.411156] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.411274] usbcore: registered new interface driver usb-storage
[ 3.411311] mousedev: PS/2 mouse device common for all mice
[ 3.411407] usbcore: registered new interface driver usbhid
[ 3.411416] usbhid: USB HID core driver
[ 3.411437] TCP: cubic registered
[ 3.411444] NET: Registered protocol family 17
[ 3.411630] VFS: Mounted root (ext2 filesystem) on device 8:1.
[ 3.411640] devtmpfs: mounted
[ 3.411648] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
[ 3.130683] pps_core: LinuxPPS API ver. 1 registered
[ 3.130692] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.130711] PTP clock support registered
[ 3.130862] Switched to clocksource arch_sys_counter
[ 3.131801] NET: Registered protocol family 2
[ 3.131900] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 3.131914] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
[ 3.131929] TCP: Hash tables configured (established 2048 bind 2048)
[ 3.131942] TCP: reno registered
[ 3.131948] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.131960] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.131987] NET: Registered protocol family 1
[ 3.132018] RPC: Registered named UNIX socket transport module.
[ 3.132028] RPC: Registered udp transport module.
[ 3.132035] RPC: Registered tcp transport module.
[ 3.132043] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.132054] PCI: CLS 0 bytes, default 64
[ 3.132151] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.132209] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.133926] fuse init (API version 7.23)
[ 3.133982] msgmni has been set to 469
[ 3.135967] io scheduler noop registered
[ 3.136002] io scheduler cfq registered (default)
[ 3.136279] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00
[ 3.136281] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 3.136283] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff]
[ 3.136284] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.136285] pci_bus 0000:00: scanning bus
[ 3.136288] pci 0000:00:00.0: [8086:1075] type 00 class 0x020000
[ 3.136290] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff]
[ 3.136292] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 3.136309] pci 0000:00:01.0: [8086:7111] type 00 class 0x010185
[ 3.136311] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x0007]
[ 3.136313] pci 0000:00:01.0: reg 0x14: [io 0x0000-0x0003]
[ 3.136315] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x0007]
[ 3.136316] pci 0000:00:01.0: reg 0x1c: [io 0x0000-0x0003]
[ 3.136318] pci 0000:00:01.0: reg 0x20: [io 0x0000-0x000f]
[ 3.136320] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 3.136337] pci_bus 0000:00: fixups for bus
[ 3.136338] pci_bus 0000:00: bus scan returning with max=00
[ 3.136340] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x1cc
[ 3.136345] pci 0000:00:00.0: fixup irq: got 33
[ 3.136346] pci 0000:00:00.0: assigning IRQ 33
[ 3.136349] pci 0000:00:01.0: fixup irq: got 34
[ 3.136350] pci 0000:00:01.0: assigning IRQ 34
[ 3.136352] pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x4001ffff]
[ 3.136354] pci 0000:00:00.0: BAR 6: assigned [mem 0x40020000-0x400207ff pref]
[ 3.136356] pci 0000:00:01.0: BAR 6: assigned [mem 0x40020800-0x40020fff pref]
[ 3.136357] pci 0000:00:01.0: BAR 4: assigned [io 0x1000-0x100f]
[ 3.136359] pci 0000:00:01.0: BAR 0: assigned [io 0x1010-0x1017]
[ 3.136361] pci 0000:00:01.0: BAR 2: assigned [io 0x1018-0x101f]
[ 3.136363] pci 0000:00:01.0: BAR 1: assigned [io 0x1020-0x1023]
[ 3.136364] pci 0000:00:01.0: BAR 3: assigned [io 0x1024-0x1027]
[ 3.136957] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.137115] ata_piix 0000:00:01.0: version 2.13
[ 3.137124] ata_piix 0000:00:01.0: enabling device (0000 -> 0001)
[ 3.137143] ata_piix 0000:00:01.0: enabling bus mastering
[ 3.137321] scsi0 : ata_piix
[ 3.137376] scsi1 : ata_piix
[ 3.137393] ata1: PATA max UDMA/33 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 34
[ 3.137395] ata2: PATA max UDMA/33 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 34
[ 3.137475] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 3.137488] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.137509] e1000 0000:00:00.0: enabling device (0000 -> 0002)
[ 3.137522] e1000 0000:00:00.0: enabling bus mastering
[ 3.290865] ata1.00: ATA-7: M5 IDE Disk, , max UDMA/66
[ 3.290866] ata1.00: 2096640 sectors, multi 0: LBA
[ 3.290873] ata1.00: configured for UDMA/33
[ 3.290889] scsi 0:0:0:0: Direct-Access ATA M5 IDE Disk n/a PQ: 0 ANSI: 5
[ 3.290951] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.290958] sd 0:0:0:0: [sda] 2096640 512-byte logical blocks: (1.07 GB/1023 MiB)
[ 3.290972] sd 0:0:0:0: [sda] Write Protect is off
[ 3.290974] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.290981] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.291034] sda: sda1
[ 3.291096] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.411154] e1000 0000:00:00.0 eth0: (PCI:33MHz:32-bit) 00:90:00:00:00:01
[ 3.411169] e1000 0000:00:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.411198] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.411208] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.411238] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 3.411251] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.411375] usbcore: registered new interface driver usb-storage
[ 3.411444] mousedev: PS/2 mouse device common for all mice
[ 3.411624] usbcore: registered new interface driver usbhid
[ 3.411633] usbhid: USB HID core driver
[ 3.411655] TCP: cubic registered
[ 3.411662] NET: Registered protocol family 17
[ 3.411877] VFS: Mounted root (ext2 filesystem) on device 8:1.
[ 3.411887] devtmpfs: mounted
[ 3.411895] Freeing unused kernel memory: 208K (ffffffc000692000 - ffffffc0006c6000)
INIT: version 2.88 booting
Starting udev
[ 3.449130] udevd[607]: starting version 182
[ 3.450115] udevd[607]: starting version 182
Starting Bootlog daemon: bootlogd.
[ 3.543090] random: dd urandom read with 19 bits of entropy available
[ 3.533154] random: dd urandom read with 19 bits of entropy available
Populating dev cache
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
@ -169,7 +169,7 @@ Mon Jan 27 08:00:00 UTC 2014
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
Configuring network interfaces... udhcpc (v1.21.1) started
[ 3.660992] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 3.671081] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Sending discover...
Sending discover...
Sending discover...