X86: Add some SSE floating point/integer conversion microops.

--HG--
extra : convert_revision : 2a1aa16709db940f5f40bbd84ca082f26b03b9c5

src/arch/x86/isa/decoder/two_byte_opcodes.isa

@@ -201,8 +201,10 @@
                 }
                 // repne (0xF2)
                 0x8: decode OPCODE_OP_BOTTOM3 {
-                    0x2: cvtsi2sd_Vq_Ed();
+                    // The size of the V operand should be q, not dp
-                    0x4: cvttsd2si_Gd_Wq();
+                    0x2: Inst::CVTSI2SD(Vdp,Edp);
+                    // The size of the W operand should be q, not dp
+                    0x4: Inst::CVTTSD2SI(Gdp,Wdp);
                     0x5: cvtsd2si_Gd_Wq();
                     default: Inst::UD2();
                 }

src/arch/x86/isa/insts/sse/__init__.py

@@ -53,7 +53,8 @@
 #
 # Authors: Gabe Black
 
-categories = ["move"]
+categories = ["move",
+              "convert"]
 
 microcode = '''
 # SSE instructions

src/arch/x86/isa/insts/sse/convert.py

@@ -0,0 +1,86 @@
+# Copyright (c) 2007 The Hewlett-Packard Development Company
+# All rights reserved.
+#
+# Redistribution and use of this software in source and binary forms,
+# with or without modification, are permitted provided that the
+# following conditions are met:
+#
+# The software must be used only for Non-Commercial Use which means any
+# use which is NOT directed to receiving any direct monetary
+# compensation for, or commercial advantage from such use.  Illustrative
+# examples of non-commercial use are academic research, personal study,
+# teaching, education and corporate research & development.
+# Illustrative examples of commercial use are distributing products for
+# commercial advantage and providing services using the software for
+# commercial advantage.
+#
+# If you wish to use this software or functionality therein that may be
+# covered by patents for commercial use, please contact:
+#     Director of Intellectual Property Licensing
+#     Office of Strategy and Technology
+#     Hewlett-Packard Company
+#     1501 Page Mill Road
+#     Palo Alto, California  94304
+#
+# Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.  Redistributions
+# in binary form must reproduce the above copyright notice, this list of
+# conditions and the following disclaimer in the documentation and/or
+# other materials provided with the distribution.  Neither the name of
+# the COPYRIGHT HOLDER(s), HEWLETT-PACKARD COMPANY, nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.  No right of
+# sublicense is granted herewith.  Derivatives of the software and
+# output created using the software may be prepared, but only for
+# Non-Commercial Uses.  Derivatives of the software may be shared with
+# others provided: (i) the others agree to abide by the list of
+# conditions herein which includes the Non-Commercial Use restrictions;
+# and (ii) such Derivatives of the software include the above copyright
+# notice to acknowledge the contribution from this software where
+# applicable, this list of conditions and the disclaimer below.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Gabe Black
+
+microcode = '''
+def macroop CVTSI2SD_R_R {
+    cvtf_i2d xmml, regm
+};
+
+def macroop CVTSI2SD_R_M {
+    ld t1, seg, sib, disp
+    cvtf_i2d xmml, t1
+};
+
+def macroop CVTSI2SD_R_P {
+    rdip t7
+    ld t1, seg, riprel, disp
+    cvtf_i2d xmml, t1
+};
+
+def macroop CVTTSD2SI_R_R {
+    cvtf_d2i reg, xmmlm
+};
+
+def macroop CVTTSD2SI_R_M {
+    ldfp ufp1, seg, sib, disp
+    cvtf_d2i reg, ufp1
+};
+
+def macroop CVTTSD2SI_R_P {
+    rdip t7
+    ldfp ufp1, seg, riprel, disp
+    cvtf_d2i reg, ufp1
+};
+'''

src/arch/x86/isa/macroop.isa

@@ -221,6 +221,11 @@ let {{
                 self.dataSize = 1
             elif self.size == 'd':
                 self.dataSize = 4
+            #This is for "double plus" which is normally a double word unless
+            #the REX W bit is set, in which case it's a quad word. It's used
+            #for some SSE instructions.
+            elif self.size == 'dp':
+                self.dataSize = "(REX_W ? 8 : 4)"
             elif self.size == 'q':
                 self.dataSize = 8
             elif self.size == 'v':
@@ -251,7 +256,7 @@ let {{
             if not self.size:
                 self.size = size
             else:
-                if self.size is not size:
+                if self.size != size:
                     raise Exception, "Conflicting register sizes %s and %s!" %\
                         (self.size, size)
 }};

src/arch/x86/isa/microops/regop.isa

@@ -636,4 +636,23 @@ let {{
 
     class Zext(RegOp):
         code = 'DestReg = bits(psrc1, imm8-1, 0);'
+
+    # Conversion microops
+    class ConvOp(RegOp):
+        abstract = True
+        def __init__(self, dest, src1):
+            super(ConvOp, self).__init__(dest, src1, "NUM_INTREGS")
+
+    #FIXME This needs to always use 32 bits unless REX.W is present
+    class cvtf_i2d(ConvOp):
+        code = 'FpDestReg = psrc1;'
+
+    class cvtf_i2d_hi(ConvOp):
+        code = 'FpDestReg = bits(SrcReg1, 63, 32);'
+
+    class cvtf_d2i(ConvOp):
+        code = '''
+        int64_t intSrcReg1 = static_cast<int64_t>(FpSrcReg1);
+        DestReg = merge(DestReg, intSrcReg1, dataSize);
+        '''
 }};