diff --git a/util/tlm/README b/util/tlm/README
index 126705296..fc620f145 100644
--- a/util/tlm/README
+++ b/util/tlm/README
@@ -94,3 +94,26 @@ The parameter -o specifies the begining of the memory region (0x80000000).
 The system should boot now.
 
 For conveniance a run_gem5.sh file holds all those commands
+
+
+III. Elastic Trace Setup
+========================
+
+Elastic traces can also be replayed into the SystemC world.
+For more information on elastic traces please refer to:
+
+ - http://www.gem5.org/TraceCPU
+
+ - Exploring System Performance using Elastic Traces:
+   Fast, Accurate and Portable
+   R. Jagtap, S. Diestelhorst, A. Hansson, M. Jung, N. Wehn.
+   IEEE International Conference on Embedded Computer Systems Architectures
+   Modeling and Simulation (SAMOS), July, 2016, Samos Island, Greece.
+
+Similar to I. the simulation can be set up with this command:
+
+> ../../build/ARM/gem5.opt ./tlm_elastic.py
+
+Then:
+
+> ./gem5.opt.sc m5out/config.ini
diff --git a/util/tlm/tlm_elastic.py b/util/tlm/tlm_elastic.py
new file mode 100644
index 000000000..3de0670c0
--- /dev/null
+++ b/util/tlm/tlm_elastic.py
@@ -0,0 +1,123 @@
+# Copyright (c) 2016, University of Kaiserslautern
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+#    this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# 3. Neither the name of the copyright holder nor the names of its
+#    contributors may be used to endorse or promote products derived from
+#    this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER
+# OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Authors: Matthias Jung
+
+import m5
+import optparse
+
+from m5.objects import *
+from m5.util import addToPath, fatal
+
+addToPath('../../configs/common/')
+
+from Caches import *
+
+# This configuration shows a simple setup of a Elastic Trace Player (eTraceCPU)
+# and an external TLM port for SystemC co-simulation.
+#
+# We assume a DRAM size of 512MB and L1 cache sizes of 32KB.
+#
+# Base System Architecture:
+#
+#                  +-----------+       ^
+# +-------------+  | eTraceCPU |       |
+# | System Port |  +-----+-----+       |
+# +------+------+  | $D1 | $I1 |       |
+#        |         +--+--+--+--+       |
+#        |            |     |          | gem5 World
+#        |            |     |          | (see this file)
+#        |            |     |          |
+# +------v------------v-----v--+       |
+# |           Membus           |       v
+# +----------------+-----------+       External Port (see sc_port.*)
+#                  |                   ^
+#              +---v---+               | TLM World
+#              |  TLM  |               | (see sc_target.*)
+#              +-------+               v
+#
+#
+# Create a system with a Crossbar and an Elastic Trace Player as CPU:
+
+# Setup System:
+system = System(cpu=TraceCPU(cpu_id=0),
+                mem_mode='timing',
+                mem_ranges = [AddrRange('512MB')],
+                cache_line_size = 64)
+
+# Create a top-level voltage domain:
+system.voltage_domain = VoltageDomain()
+
+# Create a source clock for the system. This is used as the clock period for
+# xbar and memory:
+system.clk_domain = SrcClockDomain(clock =  '1GHz',
+        voltage_domain = system.voltage_domain)
+
+# Create a CPU voltage domain:
+system.cpu_voltage_domain = VoltageDomain()
+
+# Create a separate clock domain for the CPUs. In case of Trace CPUs this clock
+# is actually used only by the caches connected to the CPU:
+system.cpu_clk_domain = SrcClockDomain(clock = '1GHz',
+        voltage_domain = system.cpu_voltage_domain)
+
+# Setup CPU and its L1 caches:
+system.cpu.createInterruptController()
+system.cpu.icache = L1_ICache(size="32kB")
+system.cpu.dcache = L1_DCache(size="32kB")
+system.cpu.icache.cpu_side = system.cpu.icache_port
+system.cpu.dcache.cpu_side = system.cpu.dcache_port
+
+# Assign input trace files to the eTraceCPU:
+system.cpu.instTraceFile="system.cpu.traceListener.inst.gz"
+system.cpu.dataTraceFile="system.cpu.traceListener.data.gz"
+
+# Setting up L1 BUS:
+system.membus = IOXBar(width = 16)
+system.physmem = SimpleMemory() # This must be instantiated, even if not needed
+
+# Create a external TLM port:
+system.tlm = ExternalSlave()
+system.tlm.addr_ranges = [AddrRange('512MB')]
+system.tlm.port_type = "tlm"
+system.tlm.port_data = "memory"
+
+# Connect everything:
+system.membus = SystemXBar()
+system.system_port = system.membus.slave
+system.cpu.icache.mem_side = system.membus.slave
+system.cpu.dcache.mem_side = system.membus.slave
+system.membus.master = system.tlm.port
+
+# Start the simulation:
+root = Root(full_system = False, system = system)
+root.system.mem_mode = 'timing'
+m5.instantiate()
+m5.simulate() #Simulation time specified later on commandline