sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/src/sim/initparam_keys.hh

71 lines
2.9 KiB
C++
Raw Normal View History

dev: add support for multi gem5 runs Multi gem5 is an extension to gem5 to enable parallel simulation of a distributed system (e.g. simulation of a pool of machines connected by Ethernet links). A multi gem5 run consists of seperate gem5 processes running in parallel (potentially on different hosts/slots on a cluster). Each gem5 process executes the simulation of a component of the simulated distributed system (e.g. a multi-core board with an Ethernet NIC). The patch implements the "distributed" Ethernet link device (dev/src/multi_etherlink.[hh.cc]). This device will send/receive (simulated) Ethernet packets to/from peer gem5 processes. The interface to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and in tcp_iface.hh. There is also a central message server process (util/multi/tcp_server.[hh,cc]) which acts like an Ethernet switch and transfers messages among the gem5 peers. A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh wrapper script. Checkpoints are supported by multi-gem5. The checkpoint must be initiated by a single gem5 process. E.g., the gem5 process with rank 0 can take a checkpoint from the bootscript just before it invokes 'mpirun' to launch an MPI test. The message server process will notify all the other peer gem5 processes and make them take a checkpoint, too (after completing a global synchronisation to ensure that there are no inflight messages among gem5).
2015-07-16 02:53:50 +02:00
/*
* Copyright (c) 2015 ARM Limited
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Gabor Dozsa
*/
/* @file
dev: Distributed Ethernet link for distributed gem5 simulations Distributed gem5 (abbreviated dist-gem5) is the result of the convergence effort between multi-gem5 and pd-gem5 (from Univ. of Wisconsin). It relies on the base multi-gem5 infrastructure for packet forwarding, synchronisation and checkpointing but combines those with the elaborated network switch model from pd-gem5. --HG-- rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2016-01-07 23:33:47 +01:00
* Magic key definitions for the InitParam pseudo inst
dev: add support for multi gem5 runs Multi gem5 is an extension to gem5 to enable parallel simulation of a distributed system (e.g. simulation of a pool of machines connected by Ethernet links). A multi gem5 run consists of seperate gem5 processes running in parallel (potentially on different hosts/slots on a cluster). Each gem5 process executes the simulation of a component of the simulated distributed system (e.g. a multi-core board with an Ethernet NIC). The patch implements the "distributed" Ethernet link device (dev/src/multi_etherlink.[hh.cc]). This device will send/receive (simulated) Ethernet packets to/from peer gem5 processes. The interface to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and in tcp_iface.hh. There is also a central message server process (util/multi/tcp_server.[hh,cc]) which acts like an Ethernet switch and transfers messages among the gem5 peers. A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh wrapper script. Checkpoints are supported by multi-gem5. The checkpoint must be initiated by a single gem5 process. E.g., the gem5 process with rank 0 can take a checkpoint from the bootscript just before it invokes 'mpirun' to launch an MPI test. The message server process will notify all the other peer gem5 processes and make them take a checkpoint, too (after completing a global synchronisation to ensure that there are no inflight messages among gem5).
2015-07-16 02:53:50 +02:00
*/
dev: Distributed Ethernet link for distributed gem5 simulations Distributed gem5 (abbreviated dist-gem5) is the result of the convergence effort between multi-gem5 and pd-gem5 (from Univ. of Wisconsin). It relies on the base multi-gem5 infrastructure for packet forwarding, synchronisation and checkpointing but combines those with the elaborated network switch model from pd-gem5. --HG-- rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2016-01-07 23:33:47 +01:00
#ifndef ___SIM_INITPARAM_KEYS_HH__
#define ___SIM_INITPARAM_KEYS_HH__
dev: add support for multi gem5 runs Multi gem5 is an extension to gem5 to enable parallel simulation of a distributed system (e.g. simulation of a pool of machines connected by Ethernet links). A multi gem5 run consists of seperate gem5 processes running in parallel (potentially on different hosts/slots on a cluster). Each gem5 process executes the simulation of a component of the simulated distributed system (e.g. a multi-core board with an Ethernet NIC). The patch implements the "distributed" Ethernet link device (dev/src/multi_etherlink.[hh.cc]). This device will send/receive (simulated) Ethernet packets to/from peer gem5 processes. The interface to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and in tcp_iface.hh. There is also a central message server process (util/multi/tcp_server.[hh,cc]) which acts like an Ethernet switch and transfers messages among the gem5 peers. A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh wrapper script. Checkpoints are supported by multi-gem5. The checkpoint must be initiated by a single gem5 process. E.g., the gem5 process with rank 0 can take a checkpoint from the bootscript just before it invokes 'mpirun' to launch an MPI test. The message server process will notify all the other peer gem5 processes and make them take a checkpoint, too (after completing a global synchronisation to ensure that there are no inflight messages among gem5).
2015-07-16 02:53:50 +02:00
dev: Distributed Ethernet link for distributed gem5 simulations Distributed gem5 (abbreviated dist-gem5) is the result of the convergence effort between multi-gem5 and pd-gem5 (from Univ. of Wisconsin). It relies on the base multi-gem5 infrastructure for packet forwarding, synchronisation and checkpointing but combines those with the elaborated network switch model from pd-gem5. --HG-- rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2016-01-07 23:33:47 +01:00
namespace PseudoInst {
/**
* Unique keys to retrieve various params by the initParam pseudo inst.
*
* @note Each key must be shorter than 16 characters (because we use
* two 64-bit registers two pass in the key to the initparam function)
*/
struct InitParamKey
dev: add support for multi gem5 runs Multi gem5 is an extension to gem5 to enable parallel simulation of a distributed system (e.g. simulation of a pool of machines connected by Ethernet links). A multi gem5 run consists of seperate gem5 processes running in parallel (potentially on different hosts/slots on a cluster). Each gem5 process executes the simulation of a component of the simulated distributed system (e.g. a multi-core board with an Ethernet NIC). The patch implements the "distributed" Ethernet link device (dev/src/multi_etherlink.[hh.cc]). This device will send/receive (simulated) Ethernet packets to/from peer gem5 processes. The interface to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and in tcp_iface.hh. There is also a central message server process (util/multi/tcp_server.[hh,cc]) which acts like an Ethernet switch and transfers messages among the gem5 peers. A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh wrapper script. Checkpoints are supported by multi-gem5. The checkpoint must be initiated by a single gem5 process. E.g., the gem5 process with rank 0 can take a checkpoint from the bootscript just before it invokes 'mpirun' to launch an MPI test. The message server process will notify all the other peer gem5 processes and make them take a checkpoint, too (after completing a global synchronisation to ensure that there are no inflight messages among gem5).
2015-07-16 02:53:50 +02:00
{
dev: Distributed Ethernet link for distributed gem5 simulations Distributed gem5 (abbreviated dist-gem5) is the result of the convergence effort between multi-gem5 and pd-gem5 (from Univ. of Wisconsin). It relies on the base multi-gem5 infrastructure for packet forwarding, synchronisation and checkpointing but combines those with the elaborated network switch model from pd-gem5. --HG-- rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2016-01-07 23:33:47 +01:00
/**
* The default key (empty string)
*/
static constexpr const char *DEFAULT = "";
/**
* Unique key for "rank" param (distributed gem5 runs)
*/
static constexpr const char *DIST_RANK = "dist-rank";
/**
* Unique key for "size" param (distributed gem5 runs)
*/
static constexpr const char *DIST_SIZE = "dist-size";
};
} // namespace PseudoInst
dev: add support for multi gem5 runs Multi gem5 is an extension to gem5 to enable parallel simulation of a distributed system (e.g. simulation of a pool of machines connected by Ethernet links). A multi gem5 run consists of seperate gem5 processes running in parallel (potentially on different hosts/slots on a cluster). Each gem5 process executes the simulation of a component of the simulated distributed system (e.g. a multi-core board with an Ethernet NIC). The patch implements the "distributed" Ethernet link device (dev/src/multi_etherlink.[hh.cc]). This device will send/receive (simulated) Ethernet packets to/from peer gem5 processes. The interface to talk to the peer gem5 processes is defined in dev/src/multi_iface.hh and in tcp_iface.hh. There is also a central message server process (util/multi/tcp_server.[hh,cc]) which acts like an Ethernet switch and transfers messages among the gem5 peers. A multi gem5 simulations can be kicked off by the util/multi/gem5-multi.sh wrapper script. Checkpoints are supported by multi-gem5. The checkpoint must be initiated by a single gem5 process. E.g., the gem5 process with rank 0 can take a checkpoint from the bootscript just before it invokes 'mpirun' to launch an MPI test. The message server process will notify all the other peer gem5 processes and make them take a checkpoint, too (after completing a global synchronisation to ensure that there are no inflight messages among gem5).
2015-07-16 02:53:50 +02:00
dev: Distributed Ethernet link for distributed gem5 simulations Distributed gem5 (abbreviated dist-gem5) is the result of the convergence effort between multi-gem5 and pd-gem5 (from Univ. of Wisconsin). It relies on the base multi-gem5 infrastructure for packet forwarding, synchronisation and checkpointing but combines those with the elaborated network switch model from pd-gem5. --HG-- rename : src/dev/net/multi_etherlink.cc => src/dev/net/dist_etherlink.cc rename : src/dev/net/multi_etherlink.hh => src/dev/net/dist_etherlink.hh rename : src/dev/net/multi_iface.cc => src/dev/net/dist_iface.cc rename : src/dev/net/multi_iface.hh => src/dev/net/dist_iface.hh rename : src/dev/net/multi_packet.hh => src/dev/net/dist_packet.hh
2016-01-07 23:33:47 +01:00
#endif
Reference in a new issue Copy permalink