gem5/ext/mcpat/cacti/io.cc

2351 lines
81 KiB
C++
Raw Normal View History

/*****************************************************************************
* McPAT/CACTI
* SOFTWARE LICENSE AGREEMENT
* Copyright 2012 Hewlett-Packard Development Company, L.P.
* All Rights Reserved
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
***************************************************************************/
#include <fstream>
#include <iostream>
#include <sstream>
#include "Ucache.h"
#include "arbiter.h"
#include "area.h"
#include "basic_circuit.h"
#include "crossbar.h"
#include "io.h"
#include "nuca.h"
#include "parameter.h"
//#include "highradix.h"
using namespace std;
/* Parses "cache.cfg" file */
void
InputParameter::parse_cfg(const string & in_file)
{
FILE *fp = fopen(in_file.c_str(), "r");
char line[5000];
char jk[5000];
char temp_var[5000];
if(!fp) {
cout << in_file << " is missing!\n";
exit(-1);
}
while(fscanf(fp, "%[^\n]\n", line) != EOF) {
if (!strncmp("-size", line, strlen("-size"))) {
sscanf(line, "-size %[(:-~)*]%u", jk, &(cache_sz));
continue;
}
if (!strncmp("-page size", line, strlen("-page size"))) {
sscanf(line, "-page size %[(:-~)*]%u", jk, &(page_sz_bits));
continue;
}
if (!strncmp("-burst length", line, strlen("-burst length"))) {
sscanf(line, "-burst %[(:-~)*]%u", jk, &(burst_len));
continue;
}
if (!strncmp("-internal prefetch width", line, strlen("-internal prefetch width"))) {
sscanf(line, "-internal prefetch %[(:-~)*]%u", jk, &(int_prefetch_w));
continue;
}
if (!strncmp("-block", line, strlen("-block"))) {
sscanf(line, "-block size (bytes) %d", &(line_sz));
continue;
}
if (!strncmp("-associativity", line, strlen("-associativity"))) {
sscanf(line, "-associativity %d", &(assoc));
continue;
}
if (!strncmp("-read-write", line, strlen("-read-write"))) {
sscanf(line, "-read-write port %d", &(num_rw_ports));
continue;
}
if (!strncmp("-exclusive read", line, strlen("exclusive read"))) {
sscanf(line, "-exclusive read port %d", &(num_rd_ports));
continue;
}
if(!strncmp("-exclusive write", line, strlen("-exclusive write"))) {
sscanf(line, "-exclusive write port %d", &(num_wr_ports));
continue;
}
if (!strncmp("-single ended", line, strlen("-single ended"))) {
sscanf(line, "-single %[(:-~)*]%d", jk,
&(num_se_rd_ports));
continue;
}
if (!strncmp("-search", line, strlen("-search"))) {
sscanf(line, "-search port %d", &(num_search_ports));
continue;
}
if (!strncmp("-UCA bank", line, strlen("-UCA bank"))) {
sscanf(line, "-UCA bank%[((:-~)| )*]%d", jk, &(nbanks));
continue;
}
if (!strncmp("-technology", line, strlen("-technology"))) {
sscanf(line, "-technology (u) %lf", &(F_sz_um));
F_sz_nm = F_sz_um*1000;
continue;
}
if (!strncmp("-output/input", line, strlen("-output/input"))) {
sscanf(line, "-output/input bus %[(:-~)*]%d", jk, &(out_w));
continue;
}
if (!strncmp("-operating temperature", line, strlen("-operating temperature"))) {
sscanf(line, "-operating temperature %[(:-~)*]%d", jk, &(temp));
continue;
}
if (!strncmp("-cache type", line, strlen("-cache type"))) {
sscanf(line, "-cache type%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("cache", temp_var, sizeof("cache"))) {
is_cache = true;
}
else
{
is_cache = false;
}
if (!strncmp("main memory", temp_var, sizeof("main memory"))) {
is_main_mem = true;
}
else {
is_main_mem = false;
}
if (!strncmp("cam", temp_var, sizeof("cam"))) {
pure_cam = true;
}
else {
pure_cam = false;
}
if (!strncmp("ram", temp_var, sizeof("ram"))) {
pure_ram = true;
}
else {
if (!is_main_mem)
pure_ram = false;
else
pure_ram = true;
}
continue;
}
if (!strncmp("-tag size", line, strlen("-tag size"))) {
sscanf(line, "-tag size%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("default", temp_var, sizeof("default"))) {
specific_tag = false;
tag_w = 42; /* the acutal value is calculated
* later based on the cache size, bank count, and associativity
*/
}
else {
specific_tag = true;
sscanf(line, "-tag size (b) %d", &(tag_w));
}
continue;
}
if (!strncmp("-access mode", line, strlen("-access mode"))) {
sscanf(line, "-access %[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("fast", temp_var, strlen("fast"))) {
access_mode = 2;
}
else if (!strncmp("sequential", temp_var, strlen("sequential"))) {
access_mode = 1;
}
else if(!strncmp("normal", temp_var, strlen("normal"))) {
access_mode = 0;
}
else {
cout << "ERROR: Invalid access mode!\n";
exit(0);
}
continue;
}
if (!strncmp("-Data array cell type", line, strlen("-Data array cell type"))) {
sscanf(line, "-Data array cell type %[^\"]\"%[^\"]\"", jk, temp_var);
if(!strncmp("itrs-hp", temp_var, strlen("itrs-hp"))) {
data_arr_ram_cell_tech_type = 0;
}
else if(!strncmp("itrs-lstp", temp_var, strlen("itrs-lstp"))) {
data_arr_ram_cell_tech_type = 1;
}
else if(!strncmp("itrs-lop", temp_var, strlen("itrs-lop"))) {
data_arr_ram_cell_tech_type = 2;
}
else if(!strncmp("lp-dram", temp_var, strlen("lp-dram"))) {
data_arr_ram_cell_tech_type = 3;
}
else if(!strncmp("comm-dram", temp_var, strlen("comm-dram"))) {
data_arr_ram_cell_tech_type = 4;
}
else {
cout << "ERROR: Invalid type!\n";
exit(0);
}
continue;
}
if (!strncmp("-Data array peripheral type", line, strlen("-Data array peripheral type"))) {
sscanf(line, "-Data array peripheral type %[^\"]\"%[^\"]\"", jk, temp_var);
if(!strncmp("itrs-hp", temp_var, strlen("itrs-hp"))) {
data_arr_peri_global_tech_type = 0;
}
else if(!strncmp("itrs-lstp", temp_var, strlen("itrs-lstp"))) {
data_arr_peri_global_tech_type = 1;
}
else if(!strncmp("itrs-lop", temp_var, strlen("itrs-lop"))) {
data_arr_peri_global_tech_type = 2;
}
else {
cout << "ERROR: Invalid type!\n";
exit(0);
}
continue;
}
if (!strncmp("-Tag array cell type", line, strlen("-Tag array cell type"))) {
sscanf(line, "-Tag array cell type %[^\"]\"%[^\"]\"", jk, temp_var);
if(!strncmp("itrs-hp", temp_var, strlen("itrs-hp"))) {
tag_arr_ram_cell_tech_type = 0;
}
else if(!strncmp("itrs-lstp", temp_var, strlen("itrs-lstp"))) {
tag_arr_ram_cell_tech_type = 1;
}
else if(!strncmp("itrs-lop", temp_var, strlen("itrs-lop"))) {
tag_arr_ram_cell_tech_type = 2;
}
else if(!strncmp("lp-dram", temp_var, strlen("lp-dram"))) {
tag_arr_ram_cell_tech_type = 3;
}
else if(!strncmp("comm-dram", temp_var, strlen("comm-dram"))) {
tag_arr_ram_cell_tech_type = 4;
}
else {
cout << "ERROR: Invalid type!\n";
exit(0);
}
continue;
}
if (!strncmp("-Tag array peripheral type", line, strlen("-Tag array peripheral type"))) {
sscanf(line, "-Tag array peripheral type %[^\"]\"%[^\"]\"", jk, temp_var);
if(!strncmp("itrs-hp", temp_var, strlen("itrs-hp"))) {
tag_arr_peri_global_tech_type = 0;
}
else if(!strncmp("itrs-lstp", temp_var, strlen("itrs-lstp"))) {
tag_arr_peri_global_tech_type = 1;
}
else if(!strncmp("itrs-lop", temp_var, strlen("itrs-lop"))) {
tag_arr_peri_global_tech_type = 2;
}
else {
cout << "ERROR: Invalid type!\n";
exit(0);
}
continue;
}
if(!strncmp("-design", line, strlen("-design"))) {
sscanf(line, "-%[((:-~)| |,)*]%d:%d:%d:%d:%d", jk,
&(delay_wt), &(dynamic_power_wt),
&(leakage_power_wt),
&(cycle_time_wt), &(area_wt));
continue;
}
if(!strncmp("-deviate", line, strlen("-deviate"))) {
sscanf(line, "-%[((:-~)| |,)*]%d:%d:%d:%d:%d", jk,
&(delay_dev), &(dynamic_power_dev),
&(leakage_power_dev),
&(cycle_time_dev), &(area_dev));
continue;
}
if(!strncmp("-Optimize", line, strlen("-Optimize"))) {
sscanf(line, "-Optimize %[^\"]\"%[^\"]\"", jk, temp_var);
if(!strncmp("ED^2", temp_var, strlen("ED^2"))) {
ed = 2;
}
else if(!strncmp("ED", temp_var, strlen("ED"))) {
ed = 1;
}
else {
ed = 0;
}
}
if(!strncmp("-NUCAdesign", line, strlen("-NUCAdesign"))) {
sscanf(line, "-%[((:-~)| |,)*]%d:%d:%d:%d:%d", jk,
&(delay_wt_nuca), &(dynamic_power_wt_nuca),
&(leakage_power_wt_nuca),
&(cycle_time_wt_nuca), &(area_wt_nuca));
continue;
}
if(!strncmp("-NUCAdeviate", line, strlen("-NUCAdeviate"))) {
sscanf(line, "-%[((:-~)| |,)*]%d:%d:%d:%d:%d", jk,
&(delay_dev_nuca), &(dynamic_power_dev_nuca),
&(leakage_power_dev_nuca),
&(cycle_time_dev_nuca), &(area_dev_nuca));
continue;
}
if(!strncmp("-Cache model", line, strlen("-cache model"))) {
sscanf(line, "-Cache model %[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("UCA", temp_var, strlen("UCA"))) {
nuca = 0;
}
else {
nuca = 1;
}
continue;
}
if(!strncmp("-NUCA bank", line, strlen("-NUCA bank"))) {
sscanf(line, "-NUCA bank count %d", &(nuca_bank_count));
if (nuca_bank_count != 0) {
force_nuca_bank = 1;
}
continue;
}
if(!strncmp("-Wire inside mat", line, strlen("-Wire inside mat"))) {
sscanf(line, "-Wire%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("global", temp_var, strlen("global"))) {
wire_is_mat_type = 2;
continue;
}
else if (!strncmp("local", temp_var, strlen("local"))) {
wire_is_mat_type = 0;
continue;
}
else {
wire_is_mat_type = 1;
continue;
}
}
if(!strncmp("-Wire outside mat", line, strlen("-Wire outside mat"))) {
sscanf(line, "-Wire%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("global", temp_var, strlen("global"))) {
wire_os_mat_type = 2;
}
else {
wire_os_mat_type = 1;
}
continue;
}
if(!strncmp("-Interconnect projection", line, strlen("-Interconnect projection"))) {
sscanf(line, "-Interconnect projection%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("aggressive", temp_var, strlen("aggressive"))) {
ic_proj_type = 0;
}
else {
ic_proj_type = 1;
}
continue;
}
if(!strncmp("-Wire signalling", line, strlen("-wire signalling"))) {
sscanf(line, "-Wire%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("default", temp_var, strlen("default"))) {
force_wiretype = 0;
wt = Global;
}
else if (!(strncmp("Global_10", temp_var, strlen("Global_10")))) {
force_wiretype = 1;
wt = Global_10;
}
else if (!(strncmp("Global_20", temp_var, strlen("Global_20")))) {
force_wiretype = 1;
wt = Global_20;
}
else if (!(strncmp("Global_30", temp_var, strlen("Global_30")))) {
force_wiretype = 1;
wt = Global_30;
}
else if (!(strncmp("Global_5", temp_var, strlen("Global_5")))) {
force_wiretype = 1;
wt = Global_5;
}
else if (!(strncmp("Global", temp_var, strlen("Global")))) {
force_wiretype = 1;
wt = Global;
}
else {
wt = Low_swing;
force_wiretype = 1;
}
continue;
}
if(!strncmp("-Core", line, strlen("-Core"))) {
sscanf(line, "-Core count %d\n", &(cores));
if (cores > 16) {
printf("No. of cores should be less than 16!\n");
}
continue;
}
if(!strncmp("-Cache level", line, strlen("-Cache level"))) {
sscanf(line, "-Cache l%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("L2", temp_var, strlen("L2"))) {
cache_level = 0;
}
else {
cache_level = 1;
}
}
if(!strncmp("-Print level", line, strlen("-Print level"))) {
sscanf(line, "-Print l%[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("DETAILED", temp_var, strlen("DETAILED"))) {
print_detail = 1;
}
else {
print_detail = 0;
}
}
if(!strncmp("-Add ECC", line, strlen("-Add ECC"))) {
sscanf(line, "-Add ECC %[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("true", temp_var, strlen("true"))) {
add_ecc_b_ = true;
}
else {
add_ecc_b_ = false;
}
}
if(!strncmp("-Print input parameters", line, strlen("-Print input parameters"))) {
sscanf(line, "-Print input %[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("true", temp_var, strlen("true"))) {
print_input_args = true;
}
else {
print_input_args = false;
}
}
if(!strncmp("-Force cache config", line, strlen("-Force cache config"))) {
sscanf(line, "-Force cache %[^\"]\"%[^\"]\"", jk, temp_var);
if (!strncmp("true", temp_var, strlen("true"))) {
force_cache_config = true;
}
else {
force_cache_config = false;
}
}
if(!strncmp("-Ndbl", line, strlen("-Ndbl"))) {
sscanf(line, "-Ndbl %d\n", &(ndbl));
continue;
}
if(!strncmp("-Ndwl", line, strlen("-Ndwl"))) {
sscanf(line, "-Ndwl %d\n", &(ndwl));
continue;
}
if(!strncmp("-Nspd", line, strlen("-Nspd"))) {
sscanf(line, "-Nspd %d\n", &(nspd));
continue;
}
if(!strncmp("-Ndsam1", line, strlen("-Ndsam1"))) {
sscanf(line, "-Ndsam1 %d\n", &(ndsam1));
continue;
}
if(!strncmp("-Ndsam2", line, strlen("-Ndsam2"))) {
sscanf(line, "-Ndsam2 %d\n", &(ndsam2));
continue;
}
if(!strncmp("-Ndcm", line, strlen("-Ndcm"))) {
sscanf(line, "-Ndcm %d\n", &(ndcm));
continue;
}
}
rpters_in_htree = true;
fclose(fp);
}
void
InputParameter::display_ip()
{
cout << "Cache size : " << cache_sz << endl;
cout << "Block size : " << line_sz << endl;
cout << "Associativity : " << assoc << endl;
cout << "Read only ports : " << num_rd_ports << endl;
cout << "Write only ports : " << num_wr_ports << endl;
cout << "Read write ports : " << num_rw_ports << endl;
cout << "Single ended read ports : " << num_se_rd_ports << endl;
if (fully_assoc||pure_cam)
{
cout << "Search ports : " << num_search_ports << endl;
}
cout << "Cache banks (UCA) : " << nbanks << endl;
cout << "Technology : " << F_sz_um << endl;
cout << "Temperature : " << temp << endl;
cout << "Tag size : " << tag_w << endl;
if (is_cache) {
cout << "array type : " << "Cache" << endl;
}
if (pure_ram) {
cout << "array type : " << "Scratch RAM" << endl;
}
if (pure_cam)
{
cout << "array type : " << "CAM" << endl;
}
cout << "Model as memory : " << is_main_mem << endl;
cout << "Access mode : " << access_mode << endl;
cout << "Data array cell type : " << data_arr_ram_cell_tech_type << endl;
cout << "Data array peripheral type : " << data_arr_peri_global_tech_type << endl;
cout << "Tag array cell type : " << tag_arr_ram_cell_tech_type << endl;
cout << "Tag array peripheral type : " << tag_arr_peri_global_tech_type << endl;
cout << "Optimization target : " << ed << endl;
cout << "Design objective (UCA wt) : " << delay_wt << " "
<< dynamic_power_wt << " " << leakage_power_wt << " " << cycle_time_wt
<< " " << area_wt << endl;
cout << "Design objective (UCA dev) : " << delay_dev << " "
<< dynamic_power_dev << " " << leakage_power_dev << " " << cycle_time_dev
<< " " << area_dev << endl;
if (nuca)
{
cout << "Cores : " << cores << endl;
cout << "Design objective (NUCA wt) : " << delay_wt_nuca << " "
<< dynamic_power_wt_nuca << " " << leakage_power_wt_nuca << " " << cycle_time_wt_nuca
<< " " << area_wt_nuca << endl;
cout << "Design objective (NUCA dev) : " << delay_dev_nuca << " "
<< dynamic_power_dev_nuca << " " << leakage_power_dev_nuca << " " << cycle_time_dev_nuca
<< " " << area_dev_nuca << endl;
}
cout << "Cache model : " << nuca << endl;
cout << "Nuca bank : " << nuca_bank_count << endl;
cout << "Wire inside mat : " << wire_is_mat_type << endl;
cout << "Wire outside mat : " << wire_os_mat_type << endl;
cout << "Interconnect projection : " << ic_proj_type << endl;
cout << "Wire signalling : " << force_wiretype << endl;
cout << "Print level : " << print_detail << endl;
cout << "ECC overhead : " << add_ecc_b_ << endl;
cout << "Page size : " << page_sz_bits << endl;
cout << "Burst length : " << burst_len << endl;
cout << "Internal prefetch width : " << int_prefetch_w << endl;
cout << "Force cache config : " << g_ip->force_cache_config << endl;
if (g_ip->force_cache_config) {
cout << "Ndwl : " << g_ip->ndwl << endl;
cout << "Ndbl : " << g_ip->ndbl << endl;
cout << "Nspd : " << g_ip->nspd << endl;
cout << "Ndcm : " << g_ip->ndcm << endl;
cout << "Ndsam1 : " << g_ip->ndsam1 << endl;
cout << "Ndsam2 : " << g_ip->ndsam2 << endl;
}
}
powerComponents operator+(const powerComponents & x, const powerComponents & y)
{
powerComponents z;
z.dynamic = x.dynamic + y.dynamic;
z.leakage = x.leakage + y.leakage;
z.gate_leakage = x.gate_leakage + y.gate_leakage;
z.short_circuit = x.short_circuit + y.short_circuit;
z.longer_channel_leakage = x.longer_channel_leakage + y.longer_channel_leakage;
return z;
}
powerComponents operator*(const powerComponents & x, double const * const y)
{
powerComponents z;
z.dynamic = x.dynamic*y[0];
z.leakage = x.leakage*y[1];
z.gate_leakage = x.gate_leakage*y[2];
z.short_circuit = x.short_circuit*y[3];
z.longer_channel_leakage = x.longer_channel_leakage*y[1];//longer channel leakage has the same behavior as normal leakage
return z;
}
powerDef operator+(const powerDef & x, const powerDef & y)
{
powerDef z;
z.readOp = x.readOp + y.readOp;
z.writeOp = x.writeOp + y.writeOp;
z.searchOp = x.searchOp + y.searchOp;
return z;
}
powerDef operator*(const powerDef & x, double const * const y)
{
powerDef z;
z.readOp = x.readOp*y;
z.writeOp = x.writeOp*y;
z.searchOp = x.searchOp*y;
return z;
}
uca_org_t cacti_interface(const string & infile_name)
{
uca_org_t fin_res;
//uca_org_t result;
fin_res.valid = false;
g_ip = new InputParameter();
g_ip->parse_cfg(infile_name);
if(!g_ip->error_checking())
exit(0);
if (g_ip->print_input_args)
g_ip->display_ip();
init_tech_params(g_ip->F_sz_um, false);
Wire winit; // Do not delete this line. It initializes wires.
// For HighRadix Only
// //// Wire wirea(g_ip->wt, 1000);
// //// wirea.print_wire();
// //// cout << "Wire Area " << wirea.area.get_area() << " sq. u" << endl;
// // winit.print_wire();
// //
// HighRadix *hr;
// hr = new HighRadix();
// hr->compute_power();
// hr->print_router();
// exit(0);
//
// double sub_switch_sz = 2;
// double rows = 32;
// for (int i=0; i<6; i++) {
// sub_switch_sz = pow(2, i);
// rows = 64/sub_switch_sz;
// hr = new HighRadix(sub_switch_sz, rows, .8/* freq */, 64, 2, 64, 0.7);
// hr->compute_power();
// hr->print_router();
// delete hr;
// }
// // HighRadix yarc;
// // yarc.compute_power();
// // yarc.print_router();
// winit.print_wire();
// exit(0);
// For HighRadix Only End
if (g_ip->nuca == 1)
{
Nuca n(&g_tp.peri_global);
n.sim_nuca();
}
g_ip->display_ip();
solve(&fin_res);
output_UCA(&fin_res);
output_data_csv(fin_res);
delete (g_ip);
return fin_res;
}
//cacti6.5's plain interface, please keep !!!
uca_org_t cacti_interface(
int cache_size,
int line_size,
int associativity,
int rw_ports,
int excl_read_ports,
int excl_write_ports,
int single_ended_read_ports,
int banks,
double tech_node, // in nm
int page_sz,
int burst_length,
int pre_width,
int output_width,
int specific_tag,
int tag_width,
int access_mode, //0 normal, 1 seq, 2 fast
int cache, //scratch ram or cache
int main_mem,
int obj_func_delay,
int obj_func_dynamic_power,
int obj_func_leakage_power,
int obj_func_area,
int obj_func_cycle_time,
int dev_func_delay,
int dev_func_dynamic_power,
int dev_func_leakage_power,
int dev_func_area,
int dev_func_cycle_time,
int ed_ed2_none, // 0 - ED, 1 - ED^2, 2 - use weight and deviate
int temp,
int wt, //0 - default(search across everything), 1 - global, 2 - 5% delay penalty, 3 - 10%, 4 - 20 %, 5 - 30%, 6 - low-swing
int data_arr_ram_cell_tech_flavor_in, // 0-4
int data_arr_peri_global_tech_flavor_in,
int tag_arr_ram_cell_tech_flavor_in,
int tag_arr_peri_global_tech_flavor_in,
int interconnect_projection_type_in, // 0 - aggressive, 1 - normal
int wire_inside_mat_type_in,
int wire_outside_mat_type_in,
int is_nuca, // 0 - UCA, 1 - NUCA
int core_count,
int cache_level, // 0 - L2, 1 - L3
int nuca_bank_count,
int nuca_obj_func_delay,
int nuca_obj_func_dynamic_power,
int nuca_obj_func_leakage_power,
int nuca_obj_func_area,
int nuca_obj_func_cycle_time,
int nuca_dev_func_delay,
int nuca_dev_func_dynamic_power,
int nuca_dev_func_leakage_power,
int nuca_dev_func_area,
int nuca_dev_func_cycle_time,
int REPEATERS_IN_HTREE_SEGMENTS_in,//TODO for now only wires with repeaters are supported
int p_input)
{
g_ip = new InputParameter();
g_ip->add_ecc_b_ = true;
g_ip->data_arr_ram_cell_tech_type = data_arr_ram_cell_tech_flavor_in;
g_ip->data_arr_peri_global_tech_type = data_arr_peri_global_tech_flavor_in;
g_ip->tag_arr_ram_cell_tech_type = tag_arr_ram_cell_tech_flavor_in;
g_ip->tag_arr_peri_global_tech_type = tag_arr_peri_global_tech_flavor_in;
g_ip->ic_proj_type = interconnect_projection_type_in;
g_ip->wire_is_mat_type = wire_inside_mat_type_in;
g_ip->wire_os_mat_type = wire_outside_mat_type_in;
g_ip->burst_len = burst_length;
g_ip->int_prefetch_w = pre_width;
g_ip->page_sz_bits = page_sz;
g_ip->cache_sz = cache_size;
g_ip->line_sz = line_size;
g_ip->assoc = associativity;
g_ip->nbanks = banks;
g_ip->out_w = output_width;
g_ip->specific_tag = specific_tag;
if (tag_width == 0) {
g_ip->tag_w = 42;
}
else {
g_ip->tag_w = tag_width;
}
g_ip->access_mode = access_mode;
g_ip->delay_wt = obj_func_delay;
g_ip->dynamic_power_wt = obj_func_dynamic_power;
g_ip->leakage_power_wt = obj_func_leakage_power;
g_ip->area_wt = obj_func_area;
g_ip->cycle_time_wt = obj_func_cycle_time;
g_ip->delay_dev = dev_func_delay;
g_ip->dynamic_power_dev = dev_func_dynamic_power;
g_ip->leakage_power_dev = dev_func_leakage_power;
g_ip->area_dev = dev_func_area;
g_ip->cycle_time_dev = dev_func_cycle_time;
g_ip->ed = ed_ed2_none;
switch(wt) {
case (0):
g_ip->force_wiretype = 0;
g_ip->wt = Global;
break;
case (1):
g_ip->force_wiretype = 1;
g_ip->wt = Global;
break;
case (2):
g_ip->force_wiretype = 1;
g_ip->wt = Global_5;
break;
case (3):
g_ip->force_wiretype = 1;
g_ip->wt = Global_10;
break;
case (4):
g_ip->force_wiretype = 1;
g_ip->wt = Global_20;
break;
case (5):
g_ip->force_wiretype = 1;
g_ip->wt = Global_30;
break;
case (6):
g_ip->force_wiretype = 1;
g_ip->wt = Low_swing;
break;
default:
cout << "Unknown wire type!\n";
exit(0);
}
g_ip->delay_wt_nuca = nuca_obj_func_delay;
g_ip->dynamic_power_wt_nuca = nuca_obj_func_dynamic_power;
g_ip->leakage_power_wt_nuca = nuca_obj_func_leakage_power;
g_ip->area_wt_nuca = nuca_obj_func_area;
g_ip->cycle_time_wt_nuca = nuca_obj_func_cycle_time;
g_ip->delay_dev_nuca = dev_func_delay;
g_ip->dynamic_power_dev_nuca = nuca_dev_func_dynamic_power;
g_ip->leakage_power_dev_nuca = nuca_dev_func_leakage_power;
g_ip->area_dev_nuca = nuca_dev_func_area;
g_ip->cycle_time_dev_nuca = nuca_dev_func_cycle_time;
g_ip->nuca = is_nuca;
g_ip->nuca_bank_count = nuca_bank_count;
if(nuca_bank_count > 0) {
g_ip->force_nuca_bank = 1;
}
g_ip->cores = core_count;
g_ip->cache_level = cache_level;
g_ip->temp = temp;
g_ip->F_sz_nm = tech_node;
g_ip->F_sz_um = tech_node / 1000;
g_ip->is_main_mem = (main_mem != 0) ? true : false;
g_ip->is_cache = (cache != 0) ? true : false;
g_ip->rpters_in_htree = (REPEATERS_IN_HTREE_SEGMENTS_in != 0) ? true : false;
g_ip->num_rw_ports = rw_ports;
g_ip->num_rd_ports = excl_read_ports;
g_ip->num_wr_ports = excl_write_ports;
g_ip->num_se_rd_ports = single_ended_read_ports;
g_ip->print_detail = 1;
g_ip->nuca = 0;
g_ip->wt = Global_5;
g_ip->force_cache_config = false;
g_ip->force_wiretype = false;
g_ip->print_input_args = p_input;
uca_org_t fin_res;
fin_res.valid = false;
if (g_ip->error_checking() == false) exit(0);
if (g_ip->print_input_args)
g_ip->display_ip();
init_tech_params(g_ip->F_sz_um, false);
Wire winit; // Do not delete this line. It initializes wires.
if (g_ip->nuca == 1)
{
Nuca n(&g_tp.peri_global);
n.sim_nuca();
}
solve(&fin_res);
output_UCA(&fin_res);
delete (g_ip);
return fin_res;
}
//McPAT's plain interface, please keep !!!
uca_org_t cacti_interface(
int cache_size,
int line_size,
int associativity,
int rw_ports,
int excl_read_ports,// para5
int excl_write_ports,
int single_ended_read_ports,
int search_ports,
int banks,
double tech_node,//para10
int output_width,
int specific_tag,
int tag_width,
int access_mode,
int cache, //para15
int main_mem,
int obj_func_delay,
int obj_func_dynamic_power,
int obj_func_leakage_power,
int obj_func_cycle_time, //para20
int obj_func_area,
int dev_func_delay,
int dev_func_dynamic_power,
int dev_func_leakage_power,
int dev_func_area, //para25
int dev_func_cycle_time,
int ed_ed2_none, // 0 - ED, 1 - ED^2, 2 - use weight and deviate
int temp,
int wt, //0 - default(search across everything), 1 - global, 2 - 5% delay penalty, 3 - 10%, 4 - 20 %, 5 - 30%, 6 - low-swing
int data_arr_ram_cell_tech_flavor_in,//para30
int data_arr_peri_global_tech_flavor_in,
int tag_arr_ram_cell_tech_flavor_in,
int tag_arr_peri_global_tech_flavor_in,
int interconnect_projection_type_in,
int wire_inside_mat_type_in,//para35
int wire_outside_mat_type_in,
int REPEATERS_IN_HTREE_SEGMENTS_in,
int VERTICAL_HTREE_WIRES_OVER_THE_ARRAY_in,
int BROADCAST_ADDR_DATAIN_OVER_VERTICAL_HTREES_in,
int PAGE_SIZE_BITS_in,//para40
int BURST_LENGTH_in,
int INTERNAL_PREFETCH_WIDTH_in,
int force_wiretype,
int wiretype,
int force_config,//para45
int ndwl,
int ndbl,
int nspd,
int ndcm,
int ndsam1,//para50
int ndsam2,
int ecc)
{
g_ip = new InputParameter();
uca_org_t fin_res;
fin_res.valid = false;
g_ip->data_arr_ram_cell_tech_type = data_arr_ram_cell_tech_flavor_in;
g_ip->data_arr_peri_global_tech_type = data_arr_peri_global_tech_flavor_in;
g_ip->tag_arr_ram_cell_tech_type = tag_arr_ram_cell_tech_flavor_in;
g_ip->tag_arr_peri_global_tech_type = tag_arr_peri_global_tech_flavor_in;
g_ip->ic_proj_type = interconnect_projection_type_in;
g_ip->wire_is_mat_type = wire_inside_mat_type_in;
g_ip->wire_os_mat_type = wire_outside_mat_type_in;
g_ip->burst_len = BURST_LENGTH_in;
g_ip->int_prefetch_w = INTERNAL_PREFETCH_WIDTH_in;
g_ip->page_sz_bits = PAGE_SIZE_BITS_in;
g_ip->cache_sz = cache_size;
g_ip->line_sz = line_size;
g_ip->assoc = associativity;
g_ip->nbanks = banks;
g_ip->out_w = output_width;
g_ip->specific_tag = specific_tag;
if (specific_tag == 0) {
g_ip->tag_w = 42;
}
else {
g_ip->tag_w = tag_width;
}
g_ip->access_mode = access_mode;
g_ip->delay_wt = obj_func_delay;
g_ip->dynamic_power_wt = obj_func_dynamic_power;
g_ip->leakage_power_wt = obj_func_leakage_power;
g_ip->area_wt = obj_func_area;
g_ip->cycle_time_wt = obj_func_cycle_time;
g_ip->delay_dev = dev_func_delay;
g_ip->dynamic_power_dev = dev_func_dynamic_power;
g_ip->leakage_power_dev = dev_func_leakage_power;
g_ip->area_dev = dev_func_area;
g_ip->cycle_time_dev = dev_func_cycle_time;
g_ip->temp = temp;
g_ip->ed = ed_ed2_none;
g_ip->F_sz_nm = tech_node;
g_ip->F_sz_um = tech_node / 1000;
g_ip->is_main_mem = (main_mem != 0) ? true : false;
g_ip->is_cache = (cache ==1) ? true : false;
g_ip->pure_ram = (cache ==0) ? true : false;
g_ip->pure_cam = (cache ==2) ? true : false;
g_ip->rpters_in_htree = (REPEATERS_IN_HTREE_SEGMENTS_in != 0) ? true : false;
g_ip->ver_htree_wires_over_array = VERTICAL_HTREE_WIRES_OVER_THE_ARRAY_in;
g_ip->broadcast_addr_din_over_ver_htrees = BROADCAST_ADDR_DATAIN_OVER_VERTICAL_HTREES_in;
g_ip->num_rw_ports = rw_ports;
g_ip->num_rd_ports = excl_read_ports;
g_ip->num_wr_ports = excl_write_ports;
g_ip->num_se_rd_ports = single_ended_read_ports;
g_ip->num_search_ports = search_ports;
g_ip->print_detail = 1;
g_ip->nuca = 0;
if (force_wiretype == 0)
{
g_ip->wt = Global;
g_ip->force_wiretype = false;
}
else
{ g_ip->force_wiretype = true;
if (wiretype==10) {
g_ip->wt = Global_10;
}
if (wiretype==20) {
g_ip->wt = Global_20;
}
if (wiretype==30) {
g_ip->wt = Global_30;
}
if (wiretype==5) {
g_ip->wt = Global_5;
}
if (wiretype==0) {
g_ip->wt = Low_swing;
}
}
//g_ip->wt = Global_5;
if (force_config == 0)
{
g_ip->force_cache_config = false;
}
else
{
g_ip->force_cache_config = true;
g_ip->ndbl=ndbl;
g_ip->ndwl=ndwl;
g_ip->nspd=nspd;
g_ip->ndcm=ndcm;
g_ip->ndsam1=ndsam1;
g_ip->ndsam2=ndsam2;
}
if (ecc==0){
g_ip->add_ecc_b_=false;
}
else
{
g_ip->add_ecc_b_=true;
}
if(!g_ip->error_checking())
exit(0);
init_tech_params(g_ip->F_sz_um, false);
Wire winit; // Do not delete this line. It initializes wires.
g_ip->display_ip();
solve(&fin_res);
output_UCA(&fin_res);
output_data_csv(fin_res);
delete (g_ip);
return fin_res;
}
bool InputParameter::error_checking()
{
int A;
bool seq_access = false;
fast_access = true;
switch (access_mode)
{
case 0:
seq_access = false;
fast_access = false;
break;
case 1:
seq_access = true;
fast_access = false;
break;
case 2:
seq_access = false;
fast_access = true;
break;
}
if(is_main_mem)
{
if(ic_proj_type == 0)
{
cerr << "DRAM model supports only conservative interconnect projection!\n\n";
return false;
}
}
uint32_t B = line_sz;
if (B < 1)
{
cerr << "Block size must >= 1" << endl;
return false;
}
else if (B*8 < out_w)
{
cerr << "Block size must be at least " << out_w/8 << endl;
return false;
}
if (F_sz_um <= 0)
{
cerr << "Feature size must be > 0" << endl;
return false;
}
else if (F_sz_um > 0.091)
{
cerr << "Feature size must be <= 90 nm" << endl;
return false;
}
uint32_t RWP = num_rw_ports;
uint32_t ERP = num_rd_ports;
uint32_t EWP = num_wr_ports;
uint32_t NSER = num_se_rd_ports;
uint32_t SCHP = num_search_ports;
//TODO: revisit this. This is an important feature. Sheng thought this should be used
// // If multiple banks and multiple ports are specified, then if number of ports is less than or equal to
// // the number of banks, we assume that the multiple ports are implemented via the multiple banks.
// // In such a case we assume that each bank has 1 RWP port.
// if ((RWP + ERP + EWP) <= nbanks && nbanks>1)
// {
// RWP = 1;
// ERP = 0;
// EWP = 0;
// NSER = 0;
// }
// else if ((RWP < 0) || (EWP < 0) || (ERP < 0))
// {
// cerr << "Ports must >=0" << endl;
// return false;
// }
// else if (RWP > 2)
// {
// cerr << "Maximum of 2 read/write ports" << endl;
// return false;
// }
// else if ((RWP+ERP+EWP) < 1)
// Changed to new implementation:
// The number of ports specified at input is per bank
if ((RWP+ERP+EWP) < 1)
{
cerr << "Must have at least one port" << endl;
return false;
}
if (is_pow2(nbanks) == false)
{
cerr << "Number of subbanks should be greater than or equal to 1 and should be a power of 2" << endl;
return false;
}
int C = cache_sz/nbanks;
if (C < 64)
{
cerr << "Cache size must >=64" << endl;
return false;
}
//TODO: revisit this
// if (pure_ram==true && assoc!=1)
// {
// cerr << "Pure RAM must have assoc as 1" << endl;
// return false;
// }
//fully assoc and cam check
if (is_cache && assoc==0)
fully_assoc =true;
else
fully_assoc = false;
if (pure_cam==true && assoc!=0)
{
cerr << "Pure CAM must have associativity as 0" << endl;
return false;
}
if (assoc==0 && (pure_cam==false && is_cache ==false))
{
cerr << "Only CAM or Fully associative cache can have associativity as 0" << endl;
return false;
}
if ((fully_assoc==true || pure_cam==true)
&& (data_arr_ram_cell_tech_type!= tag_arr_ram_cell_tech_type
|| data_arr_peri_global_tech_type != tag_arr_peri_global_tech_type ))
{
cerr << "CAM and fully associative cache must have same device type for both data and tag array" << endl;
return false;
}
if ((fully_assoc==true || pure_cam==true)
&& (data_arr_ram_cell_tech_type== lp_dram || data_arr_ram_cell_tech_type== comm_dram))
{
cerr << "DRAM based CAM and fully associative cache are not supported" << endl;
return false;
}
if ((fully_assoc==true || pure_cam==true)
&& (is_main_mem==true))
{
cerr << "CAM and fully associative cache cannot be as main memory" << endl;
return false;
}
if ((fully_assoc || pure_cam) && SCHP<1)
{
cerr << "CAM and fully associative must have at least 1 search port" << endl;
return false;
}
if (RWP==0 && ERP==0 && SCHP>0 && ((fully_assoc || pure_cam)))
{
ERP=SCHP;
}
// if ((!(fully_assoc || pure_cam)) && SCHP>=1)
// {
// cerr << "None CAM and fully associative cannot have search ports" << endl;
// return false;
// }
if (assoc == 0)
{
A = C/B;
//fully_assoc = true;
}
else
{
if (assoc == 1)
{
A = 1;
//fully_assoc = false;
}
else
{
//fully_assoc = false;
A = assoc;
if (is_pow2(A) == false)
{
cerr << "Associativity must be a power of 2" << endl;
return false;
}
}
}
if (C/(B*A) <= 1 && assoc!=0)
{
cerr << "Number of sets is too small: " << endl;
cerr << " Need to either increase cache size, or decrease associativity or block size" << endl;
cerr << " (or use fully associative cache)" << endl;
return false;
}
block_sz = B;
/*dt: testing sequential access mode*/
if(seq_access)
{
tag_assoc = A;
data_assoc = 1;
is_seq_acc = true;
}
else
{
tag_assoc = A;
data_assoc = A;
is_seq_acc = false;
}
if (assoc==0)
{
data_assoc = 1;
}
num_rw_ports = RWP;
num_rd_ports = ERP;
num_wr_ports = EWP;
num_se_rd_ports = NSER;
if (!(fully_assoc || pure_cam))
num_search_ports = 0;
nsets = C/(B*A);
if (temp < 300 || temp > 400 || temp%10 != 0)
{
cerr << temp << " Temperature must be between 300 and 400 Kelvin and multiple of 10." << endl;
return false;
}
if (nsets < 1)
{
cerr << "Less than one set..." << endl;
return false;
}
return true;
}
void output_data_csv(const uca_org_t & fin_res)
{
//TODO: the csv output should remain
fstream file("out.csv", ios::in);
bool print_index = file.fail();
file.close();
file.open("out.csv", ios::out|ios::app);
if (file.fail() == true)
{
cerr << "File out.csv could not be opened successfully" << endl;
}
else
{
if (print_index == true)
{
file << "Tech node (nm), ";
file << "Capacity (bytes), ";
file << "Number of banks, ";
file << "Associativity, ";
file << "Output width (bits), ";
file << "Access time (ns), ";
file << "Random cycle time (ns), ";
// file << "Multisubbank interleave cycle time (ns), ";
// file << "Delay request network (ns), ";
// file << "Delay inside mat (ns), ";
// file << "Delay reply network (ns), ";
// file << "Tag array access time (ns), ";
// file << "Data array access time (ns), ";
// file << "Refresh period (microsec), ";
// file << "DRAM array availability (%), ";
file << "Dynamic search energy (nJ), ";
file << "Dynamic read energy (nJ), ";
file << "Dynamic write energy (nJ), ";
// file << "Tag Dynamic read energy (nJ), ";
// file << "Data Dynamic read energy (nJ), ";
// file << "Dynamic read power (mW), ";
file << "Standby leakage per bank(mW), ";
// file << "Leakage per bank with leak power management (mW), ";
// file << "Leakage per bank with leak power management (mW), ";
// file << "Refresh power as percentage of standby leakage, ";
file << "Area (mm2), ";
file << "Ndwl, ";
file << "Ndbl, ";
file << "Nspd, ";
file << "Ndcm, ";
file << "Ndsam_level_1, ";
file << "Ndsam_level_2, ";
file << "Data arrary area efficiency %, ";
file << "Ntwl, ";
file << "Ntbl, ";
file << "Ntspd, ";
file << "Ntcm, ";
file << "Ntsam_level_1, ";
file << "Ntsam_level_2, ";
file << "Tag arrary area efficiency %, ";
// file << "Resistance per unit micron (ohm-micron), ";
// file << "Capacitance per unit micron (fF per micron), ";
// file << "Unit-length wire delay (ps), ";
// file << "FO4 delay (ps), ";
// file << "delay route to bank (including crossb delay) (ps), ";
// file << "Crossbar delay (ps), ";
// file << "Dyn read energy per access from closed page (nJ), ";
// file << "Dyn read energy per access from open page (nJ), ";
// file << "Leak power of an subbank with page closed (mW), ";
// file << "Leak power of a subbank with page open (mW), ";
// file << "Leak power of request and reply networks (mW), ";
// file << "Number of subbanks, ";
// file << "Page size in bits, ";
// file << "Activate power, ";
// file << "Read power, ";
// file << "Write power, ";
// file << "Precharge power, ";
// file << "tRCD, ";
// file << "CAS latency, ";
// file << "Precharge delay, ";
// file << "Perc dyn energy bitlines, ";
// file << "perc dyn energy wordlines, ";
// file << "perc dyn energy outside mat, ";
// file << "Area opt (perc), ";
// file << "Delay opt (perc), ";
// file << "Repeater opt (perc), ";
// file << "Aspect ratio";
file << endl;
}
file << g_ip->F_sz_nm << ", ";
file << g_ip->cache_sz << ", ";
file << g_ip->nbanks << ", ";
file << g_ip->tag_assoc << ", ";
file << g_ip->out_w << ", ";
file << fin_res.access_time*1e+9 << ", ";
file << fin_res.cycle_time*1e+9 << ", ";
// file << fin_res.data_array2->multisubbank_interleave_cycle_time*1e+9 << ", ";
// file << fin_res.data_array2->delay_request_network*1e+9 << ", ";
// file << fin_res.data_array2->delay_inside_mat*1e+9 << ", ";
// file << fin_res.data_array2.delay_reply_network*1e+9 << ", ";
// if (!(g_ip->fully_assoc || g_ip->pure_cam || g_ip->pure_ram))
// {
// file << fin_res.tag_array2->access_time*1e+9 << ", ";
// }
// else
// {
// file << 0 << ", ";
// }
// file << fin_res.data_array2->access_time*1e+9 << ", ";
// file << fin_res.data_array2->dram_refresh_period*1e+6 << ", ";
// file << fin_res.data_array2->dram_array_availability << ", ";
if (g_ip->fully_assoc || g_ip->pure_cam)
{
file << fin_res.power.searchOp.dynamic*1e+9 << ", ";
}
else
{
file << "N/A" << ", ";
}
file << fin_res.power.readOp.dynamic*1e+9 << ", ";
file << fin_res.power.writeOp.dynamic*1e+9 << ", ";
// if (!(g_ip->fully_assoc || g_ip->pure_cam || g_ip->pure_ram))
// {
// file << fin_res.tag_array2->power.readOp.dynamic*1e+9 << ", ";
// }
// else
// {
// file << "NA" << ", ";
// }
// file << fin_res.data_array2->power.readOp.dynamic*1e+9 << ", ";
// if (g_ip->fully_assoc || g_ip->pure_cam)
// {
// file << fin_res.power.searchOp.dynamic*1000/fin_res.cycle_time << ", ";
// }
// else
// {
// file << fin_res.power.readOp.dynamic*1000/fin_res.cycle_time << ", ";
// }
file <<( fin_res.power.readOp.leakage + fin_res.power.readOp.gate_leakage )*1000 << ", ";
// file << fin_res.leak_power_with_sleep_transistors_in_mats*1000 << ", ";
// file << fin_res.data_array.refresh_power / fin_res.data_array.total_power.readOp.leakage << ", ";
file << fin_res.area*1e-6 << ", ";
file << fin_res.data_array2->Ndwl << ", ";
file << fin_res.data_array2->Ndbl << ", ";
file << fin_res.data_array2->Nspd << ", ";
file << fin_res.data_array2->deg_bl_muxing << ", ";
file << fin_res.data_array2->Ndsam_lev_1 << ", ";
file << fin_res.data_array2->Ndsam_lev_2 << ", ";
file << fin_res.data_array2->area_efficiency << ", ";
if (!(g_ip->fully_assoc || g_ip->pure_cam || g_ip->pure_ram))
{
file << fin_res.tag_array2->Ndwl << ", ";
file << fin_res.tag_array2->Ndbl << ", ";
file << fin_res.tag_array2->Nspd << ", ";
file << fin_res.tag_array2->deg_bl_muxing << ", ";
file << fin_res.tag_array2->Ndsam_lev_1 << ", ";
file << fin_res.tag_array2->Ndsam_lev_2 << ", ";
file << fin_res.tag_array2->area_efficiency << ", ";
}
else
{
file << "N/A" << ", ";
file << "N/A"<< ", ";
file << "N/A" << ", ";
file << "N/A" << ", ";
file << "N/A" << ", ";
file << "N/A" << ", ";
file << "N/A" << ", ";
}
// file << g_tp.wire_inside_mat.R_per_um << ", ";
// file << g_tp.wire_inside_mat.C_per_um / 1e-15 << ", ";
// file << g_tp.unit_len_wire_del / 1e-12 << ", ";
// file << g_tp.FO4 / 1e-12 << ", ";
// file << fin_res.data_array.delay_route_to_bank / 1e-9 << ", ";
// file << fin_res.data_array.delay_crossbar / 1e-9 << ", ";
// file << fin_res.data_array.dyn_read_energy_from_closed_page / 1e-9 << ", ";
// file << fin_res.data_array.dyn_read_energy_from_open_page / 1e-9 << ", ";
// file << fin_res.data_array.leak_power_subbank_closed_page / 1e-3 << ", ";
// file << fin_res.data_array.leak_power_subbank_open_page / 1e-3 << ", ";
// file << fin_res.data_array.leak_power_request_and_reply_networks / 1e-3 << ", ";
// file << fin_res.data_array.number_subbanks << ", " ;
// file << fin_res.data_array.page_size_in_bits << ", " ;
// file << fin_res.data_array.activate_energy * 1e9 << ", " ;
// file << fin_res.data_array.read_energy * 1e9 << ", " ;
// file << fin_res.data_array.write_energy * 1e9 << ", " ;
// file << fin_res.data_array.precharge_energy * 1e9 << ", " ;
// file << fin_res.data_array.trcd * 1e9 << ", " ;
// file << fin_res.data_array.cas_latency * 1e9 << ", " ;
// file << fin_res.data_array.precharge_delay * 1e9 << ", " ;
// file << fin_res.data_array.all_banks_height / fin_res.data_array.all_banks_width;
file<<endl;
}
file.close();
}
void output_UCA(uca_org_t *fr)
{
// if (NUCA)
if (0) {
cout << "\n\n Detailed Bank Stats:\n";
cout << " Bank Size (bytes): %d\n" <<
(int) (g_ip->cache_sz);
}
else {
if (g_ip->data_arr_ram_cell_tech_type == 3) {
cout << "\n---------- CACTI version 6.5, Uniform Cache Access " <<
"Logic Process Based DRAM Model ----------\n";
}
else if (g_ip->data_arr_ram_cell_tech_type == 4) {
cout << "\n---------- CACTI version 6.5, Uniform" <<
"Cache Access Commodity DRAM Model ----------\n";
}
else {
cout << "\n---------- CACTI version 6.5, Uniform Cache Access "
"SRAM Model ----------\n";
}
cout << "\nCache Parameters:\n";
cout << " Total cache size (bytes): " <<
(int) (g_ip->cache_sz) << endl;
}
cout << " Number of banks: " << (int) g_ip->nbanks << endl;
if (g_ip->fully_assoc|| g_ip->pure_cam)
cout << " Associativity: fully associative\n";
else {
if (g_ip->tag_assoc == 1)
cout << " Associativity: direct mapped\n";
else
cout << " Associativity: " <<
g_ip->tag_assoc << endl;
}
cout << " Block size (bytes): " << g_ip->line_sz << endl;
cout << " Read/write Ports: " <<
g_ip->num_rw_ports << endl;
cout << " Read ports: " <<
g_ip->num_rd_ports << endl;
cout << " Write ports: " <<
g_ip->num_wr_ports << endl;
if (g_ip->fully_assoc|| g_ip->pure_cam)
cout << " search ports: " <<
g_ip->num_search_ports << endl;
cout << " Technology size (nm): " <<
g_ip->F_sz_nm << endl << endl;
cout << " Access time (ns): " << fr->access_time*1e9 << endl;
cout << " Cycle time (ns): " << fr->cycle_time*1e9 << endl;
if (g_ip->data_arr_ram_cell_tech_type >= 4) {
cout << " Precharge Delay (ns): " << fr->data_array2->precharge_delay*1e9 << endl;
cout << " Activate Energy (nJ): " << fr->data_array2->activate_energy*1e9 << endl;
cout << " Read Energy (nJ): " << fr->data_array2->read_energy*1e9 << endl;
cout << " Write Energy (nJ): " << fr->data_array2->write_energy*1e9 << endl;
cout << " Precharge Energy (nJ): " << fr->data_array2->precharge_energy*1e9 << endl;
cout << " Leakage Power Closed Page (mW): " << fr->data_array2->leak_power_subbank_closed_page*1e3 << endl;
cout << " Leakage Power Open Page (mW): " << fr->data_array2->leak_power_subbank_open_page*1e3 << endl;
cout << " Leakage Power I/O (mW): " << fr->data_array2->leak_power_request_and_reply_networks*1e3 << endl;
cout << " Refresh power (mW): " <<
fr->data_array2->refresh_power*1e3 << endl;
}
else {
if ((g_ip->fully_assoc|| g_ip->pure_cam))
{
cout << " Total dynamic associative search energy per access (nJ): " <<
fr->power.searchOp.dynamic*1e9 << endl;
// cout << " Total dynamic read energy per access (nJ): " <<
// fr->power.readOp.dynamic*1e9 << endl;
// cout << " Total dynamic write energy per access (nJ): " <<
// fr->power.writeOp.dynamic*1e9 << endl;
}
// else
// {
cout << " Total dynamic read energy per access (nJ): " <<
fr->power.readOp.dynamic*1e9 << endl;
cout << " Total dynamic write energy per access (nJ): " <<
fr->power.writeOp.dynamic*1e9 << endl;
// }
cout << " Total leakage power of a bank"
" (mW): " << fr->power.readOp.leakage*1e3 << endl;
cout << " Total gate leakage power of a bank"
" (mW): " << fr->power.readOp.gate_leakage*1e3 << endl;
}
if (g_ip->data_arr_ram_cell_tech_type ==3 || g_ip->data_arr_ram_cell_tech_type ==4)
{
}
cout << " Cache height x width (mm): " <<
fr->cache_ht*1e-3 << " x " << fr->cache_len*1e-3 << endl << endl;
cout << " Best Ndwl : " << fr->data_array2->Ndwl << endl;
cout << " Best Ndbl : " << fr->data_array2->Ndbl << endl;
cout << " Best Nspd : " << fr->data_array2->Nspd << endl;
cout << " Best Ndcm : " << fr->data_array2->deg_bl_muxing << endl;
cout << " Best Ndsam L1 : " << fr->data_array2->Ndsam_lev_1 << endl;
cout << " Best Ndsam L2 : " << fr->data_array2->Ndsam_lev_2 << endl << endl;
if ((!(g_ip->pure_ram|| g_ip->pure_cam || g_ip->fully_assoc)) && !g_ip->is_main_mem)
{
cout << " Best Ntwl : " << fr->tag_array2->Ndwl << endl;
cout << " Best Ntbl : " << fr->tag_array2->Ndbl << endl;
cout << " Best Ntspd : " << fr->tag_array2->Nspd << endl;
cout << " Best Ntcm : " << fr->tag_array2->deg_bl_muxing << endl;
cout << " Best Ntsam L1 : " << fr->tag_array2->Ndsam_lev_1 << endl;
cout << " Best Ntsam L2 : " << fr->tag_array2->Ndsam_lev_2 << endl;
}
switch (fr->data_array2->wt) {
case (0):
cout << " Data array, H-tree wire type: Delay optimized global wires\n";
break;
case (1):
cout << " Data array, H-tree wire type: Global wires with 5\% delay penalty\n";
break;
case (2):
cout << " Data array, H-tree wire type: Global wires with 10\% delay penalty\n";
break;
case (3):
cout << " Data array, H-tree wire type: Global wires with 20\% delay penalty\n";
break;
case (4):
cout << " Data array, H-tree wire type: Global wires with 30\% delay penalty\n";
break;
case (5):
cout << " Data array, wire type: Low swing wires\n";
break;
default:
cout << "ERROR - Unknown wire type " << (int) fr->data_array2->wt <<endl;
exit(0);
}
if (!(g_ip->pure_ram|| g_ip->pure_cam || g_ip->fully_assoc)) {
switch (fr->tag_array2->wt) {
case (0):
cout << " Tag array, H-tree wire type: Delay optimized global wires\n";
break;
case (1):
cout << " Tag array, H-tree wire type: Global wires with 5\% delay penalty\n";
break;
case (2):
cout << " Tag array, H-tree wire type: Global wires with 10\% delay penalty\n";
break;
case (3):
cout << " Tag array, H-tree wire type: Global wires with 20\% delay penalty\n";
break;
case (4):
cout << " Tag array, H-tree wire type: Global wires with 30\% delay penalty\n";
break;
case (5):
cout << " Tag array, wire type: Low swing wires\n";
break;
default:
cout << "ERROR - Unknown wire type " << (int) fr->tag_array2->wt <<endl;
exit(-1);
}
}
if (g_ip->print_detail)
{
//if(g_ip->fully_assoc) return;
/* Delay stats */
/* data array stats */
cout << endl << "Time Components:" << endl << endl;
cout << " Data side (with Output driver) (ns): " <<
fr->data_array2->access_time/1e-9 << endl;
cout << "\tH-tree input delay (ns): " <<
fr->data_array2->delay_route_to_bank * 1e9 +
fr->data_array2->delay_input_htree * 1e9 << endl;
if (!(g_ip->pure_cam || g_ip->fully_assoc))
{
cout << "\tDecoder + wordline delay (ns): " <<
fr->data_array2->delay_row_predecode_driver_and_block * 1e9 +
fr->data_array2->delay_row_decoder * 1e9 << endl;
}
else
{
cout << "\tCAM search delay (ns): " <<
fr->data_array2->delay_matchlines * 1e9 << endl;
}
cout << "\tBitline delay (ns): " <<
fr->data_array2->delay_bitlines/1e-9 << endl;
cout << "\tSense Amplifier delay (ns): " <<
fr->data_array2->delay_sense_amp * 1e9 << endl;
cout << "\tH-tree output delay (ns): " <<
fr->data_array2->delay_subarray_output_driver * 1e9 +
fr->data_array2->delay_dout_htree * 1e9 << endl;
if ((!(g_ip->pure_ram|| g_ip->pure_cam || g_ip->fully_assoc)) && !g_ip->is_main_mem)
{
/* tag array stats */
cout << endl << " Tag side (with Output driver) (ns): " <<
fr->tag_array2->access_time/1e-9 << endl;
cout << "\tH-tree input delay (ns): " <<
fr->tag_array2->delay_route_to_bank * 1e9 +
fr->tag_array2->delay_input_htree * 1e9 << endl;
cout << "\tDecoder + wordline delay (ns): " <<
fr->tag_array2->delay_row_predecode_driver_and_block * 1e9 +
fr->tag_array2->delay_row_decoder * 1e9 << endl;
cout << "\tBitline delay (ns): " <<
fr->tag_array2->delay_bitlines/1e-9 << endl;
cout << "\tSense Amplifier delay (ns): " <<
fr->tag_array2->delay_sense_amp * 1e9 << endl;
cout << "\tComparator delay (ns): " <<
fr->tag_array2->delay_comparator * 1e9 << endl;
cout << "\tH-tree output delay (ns): " <<
fr->tag_array2->delay_subarray_output_driver * 1e9 +
fr->tag_array2->delay_dout_htree * 1e9 << endl;
}
/* Energy/Power stats */
cout << endl << endl << "Power Components:" << endl << endl;
if (!(g_ip->pure_cam || g_ip->fully_assoc))
{
cout << " Data array: Total dynamic read energy/access (nJ): " <<
fr->data_array2->power.readOp.dynamic * 1e9 << endl;
cout << "\tTotal leakage read/write power of a bank (mW): " <<
fr->data_array2->power.readOp.leakage * 1e3 << endl;
cout << "\tTotal energy in H-tree (that includes both "
"address and data transfer) (nJ): " <<
(fr->data_array2->power_addr_input_htree.readOp.dynamic +
fr->data_array2->power_data_output_htree.readOp.dynamic +
fr->data_array2->power_routing_to_bank.readOp.dynamic) * 1e9 << endl;
cout << "\tTotal leakage power in H-tree (that includes both "
"address and data network) ((mW)): " <<
(fr->data_array2->power_addr_input_htree.readOp.leakage +
fr->data_array2->power_data_output_htree.readOp.leakage +
fr->data_array2->power_routing_to_bank.readOp.leakage) * 1e3 << endl;
cout << "\tTotal gate leakage power in H-tree (that includes both "
"address and data network) ((mW)): " <<
(fr->data_array2->power_addr_input_htree.readOp.gate_leakage +
fr->data_array2->power_data_output_htree.readOp.gate_leakage +
fr->data_array2->power_routing_to_bank.readOp.gate_leakage) * 1e3 << endl;
cout << "\tOutput Htree inside bank Energy (nJ): " <<
fr->data_array2->power_data_output_htree.readOp.dynamic * 1e9 << endl;
cout << "\tDecoder (nJ): " <<
fr->data_array2->power_row_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_row_predecoder_blocks.readOp.dynamic * 1e9 << endl;
cout << "\tWordline (nJ): " <<
fr->data_array2->power_row_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitline mux & associated drivers (nJ): " <<
fr->data_array2->power_bit_mux_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_bit_mux_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_bit_mux_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tSense amp mux & associated drivers (nJ): " <<
fr->data_array2->power_senseamp_mux_lev_1_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_1_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_1_decoders.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitlines precharge and equalization circuit (nJ): " <<
fr->data_array2->power_prechg_eq_drivers.readOp.dynamic * 1e9 << endl;
cout << "\tBitlines (nJ): " <<
fr->data_array2->power_bitlines.readOp.dynamic * 1e9 << endl;
cout << "\tSense amplifier energy (nJ): " <<
fr->data_array2->power_sense_amps.readOp.dynamic * 1e9 << endl;
cout << "\tSub-array output driver (nJ): " <<
fr->data_array2->power_output_drivers_at_subarray.readOp.dynamic * 1e9 << endl;
}
else if (g_ip->pure_cam)
{
cout << " CAM array:"<<endl;
cout << " Total dynamic associative search energy/access (nJ): " <<
fr->data_array2->power.searchOp.dynamic * 1e9 << endl;
cout << "\tTotal energy in H-tree (that includes both "
"match key and data transfer) (nJ): " <<
(fr->data_array2->power_htree_in_search.searchOp.dynamic +
fr->data_array2->power_htree_out_search.searchOp.dynamic +
fr->data_array2->power_routing_to_bank.searchOp.dynamic) * 1e9 << endl;
cout << "\tKeyword input and result output Htrees inside bank Energy (nJ): " <<
(fr->data_array2->power_htree_in_search.searchOp.dynamic +
fr->data_array2->power_htree_out_search.searchOp.dynamic) * 1e9 << endl;
cout << "\tSearchlines (nJ): " <<
fr->data_array2->power_searchline.searchOp.dynamic * 1e9 +
fr->data_array2->power_searchline_precharge.searchOp.dynamic * 1e9 << endl;
cout << "\tMatchlines (nJ): " <<
fr->data_array2->power_matchlines.searchOp.dynamic * 1e9 +
fr->data_array2->power_matchline_precharge.searchOp.dynamic * 1e9 << endl;
cout << "\tSub-array output driver (nJ): " <<
fr->data_array2->power_output_drivers_at_subarray.searchOp.dynamic * 1e9 << endl;
cout <<endl<< " Total dynamic read energy/access (nJ): " <<
fr->data_array2->power.readOp.dynamic * 1e9 << endl;
cout << "\tTotal energy in H-tree (that includes both "
"address and data transfer) (nJ): " <<
(fr->data_array2->power_addr_input_htree.readOp.dynamic +
fr->data_array2->power_data_output_htree.readOp.dynamic +
fr->data_array2->power_routing_to_bank.readOp.dynamic) * 1e9 << endl;
cout << "\tOutput Htree inside bank Energy (nJ): " <<
fr->data_array2->power_data_output_htree.readOp.dynamic * 1e9 << endl;
cout << "\tDecoder (nJ): " <<
fr->data_array2->power_row_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_row_predecoder_blocks.readOp.dynamic * 1e9 << endl;
cout << "\tWordline (nJ): " <<
fr->data_array2->power_row_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitline mux & associated drivers (nJ): " <<
fr->data_array2->power_bit_mux_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_bit_mux_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_bit_mux_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tSense amp mux & associated drivers (nJ): " <<
fr->data_array2->power_senseamp_mux_lev_1_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_1_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_1_decoders.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitlines (nJ): " <<
fr->data_array2->power_bitlines.readOp.dynamic * 1e9 +
fr->data_array2->power_prechg_eq_drivers.readOp.dynamic * 1e9<< endl;
cout << "\tSense amplifier energy (nJ): " <<
fr->data_array2->power_sense_amps.readOp.dynamic * 1e9 << endl;
cout << "\tSub-array output driver (nJ): " <<
fr->data_array2->power_output_drivers_at_subarray.readOp.dynamic * 1e9 << endl;
cout << endl <<" Total leakage power of a bank (mW): " <<
fr->data_array2->power.readOp.leakage * 1e3 << endl;
}
else
{
cout << " Fully associative array:"<<endl;
cout << " Total dynamic associative search energy/access (nJ): " <<
fr->data_array2->power.searchOp.dynamic * 1e9 << endl;
cout << "\tTotal energy in H-tree (that includes both "
"match key and data transfer) (nJ): " <<
(fr->data_array2->power_htree_in_search.searchOp.dynamic +
fr->data_array2->power_htree_out_search.searchOp.dynamic +
fr->data_array2->power_routing_to_bank.searchOp.dynamic) * 1e9 << endl;
cout << "\tKeyword input and result output Htrees inside bank Energy (nJ): " <<
(fr->data_array2->power_htree_in_search.searchOp.dynamic +
fr->data_array2->power_htree_out_search.searchOp.dynamic) * 1e9 << endl;
cout << "\tSearchlines (nJ): " <<
fr->data_array2->power_searchline.searchOp.dynamic * 1e9 +
fr->data_array2->power_searchline_precharge.searchOp.dynamic * 1e9 << endl;
cout << "\tMatchlines (nJ): " <<
fr->data_array2->power_matchlines.searchOp.dynamic * 1e9 +
fr->data_array2->power_matchline_precharge.searchOp.dynamic * 1e9 << endl;
cout << "\tData portion wordline (nJ): " <<
fr->data_array2->power_matchline_to_wordline_drv.searchOp.dynamic * 1e9 << endl;
cout << "\tData Bitlines (nJ): " <<
fr->data_array2->power_bitlines.searchOp.dynamic * 1e9 +
fr->data_array2->power_prechg_eq_drivers.searchOp.dynamic * 1e9 << endl;
cout << "\tSense amplifier energy (nJ): " <<
fr->data_array2->power_sense_amps.searchOp.dynamic * 1e9 << endl;
cout << "\tSub-array output driver (nJ): " <<
fr->data_array2->power_output_drivers_at_subarray.searchOp.dynamic * 1e9 << endl;
cout <<endl<< " Total dynamic read energy/access (nJ): " <<
fr->data_array2->power.readOp.dynamic * 1e9 << endl;
cout << "\tTotal energy in H-tree (that includes both "
"address and data transfer) (nJ): " <<
(fr->data_array2->power_addr_input_htree.readOp.dynamic +
fr->data_array2->power_data_output_htree.readOp.dynamic +
fr->data_array2->power_routing_to_bank.readOp.dynamic) * 1e9 << endl;
cout << "\tOutput Htree inside bank Energy (nJ): " <<
fr->data_array2->power_data_output_htree.readOp.dynamic * 1e9 << endl;
cout << "\tDecoder (nJ): " <<
fr->data_array2->power_row_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_row_predecoder_blocks.readOp.dynamic * 1e9 << endl;
cout << "\tWordline (nJ): " <<
fr->data_array2->power_row_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitline mux & associated drivers (nJ): " <<
fr->data_array2->power_bit_mux_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_bit_mux_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_bit_mux_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tSense amp mux & associated drivers (nJ): " <<
fr->data_array2->power_senseamp_mux_lev_1_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_1_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_1_decoders.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_predecoder_drivers.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_predecoder_blocks.readOp.dynamic * 1e9 +
fr->data_array2->power_senseamp_mux_lev_2_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitlines (nJ): " <<
fr->data_array2->power_bitlines.readOp.dynamic * 1e9 +
fr->data_array2->power_prechg_eq_drivers.readOp.dynamic * 1e9<< endl;
cout << "\tSense amplifier energy (nJ): " <<
fr->data_array2->power_sense_amps.readOp.dynamic * 1e9 << endl;
cout << "\tSub-array output driver (nJ): " <<
fr->data_array2->power_output_drivers_at_subarray.readOp.dynamic * 1e9 << endl;
cout << endl <<" Total leakage power of a bank (mW): " <<
fr->data_array2->power.readOp.leakage * 1e3 << endl;
}
if ((!(g_ip->pure_ram|| g_ip->pure_cam || g_ip->fully_assoc)) && !g_ip->is_main_mem)
{
cout << endl << " Tag array: Total dynamic read energy/access (nJ): " <<
fr->tag_array2->power.readOp.dynamic * 1e9 << endl;
cout << "\tTotal leakage read/write power of a bank (mW): " <<
fr->tag_array2->power.readOp.leakage * 1e3 << endl;
cout << "\tTotal energy in H-tree (that includes both "
"address and data transfer) (nJ): " <<
(fr->tag_array2->power_addr_input_htree.readOp.dynamic +
fr->tag_array2->power_data_output_htree.readOp.dynamic +
fr->tag_array2->power_routing_to_bank.readOp.dynamic) * 1e9 << endl;
cout << "\tTotal leakage power in H-tree (that includes both "
"address and data network) ((mW)): " <<
(fr->tag_array2->power_addr_input_htree.readOp.leakage +
fr->tag_array2->power_data_output_htree.readOp.leakage +
fr->tag_array2->power_routing_to_bank.readOp.leakage) * 1e3 << endl;
cout << "\tTotal gate leakage power in H-tree (that includes both "
"address and data network) ((mW)): " <<
(fr->tag_array2->power_addr_input_htree.readOp.gate_leakage +
fr->tag_array2->power_data_output_htree.readOp.gate_leakage +
fr->tag_array2->power_routing_to_bank.readOp.gate_leakage) * 1e3 << endl;
cout << "\tOutput Htree inside a bank Energy (nJ): " <<
fr->tag_array2->power_data_output_htree.readOp.dynamic * 1e9 << endl;
cout << "\tDecoder (nJ): " <<
fr->tag_array2->power_row_predecoder_drivers.readOp.dynamic * 1e9 +
fr->tag_array2->power_row_predecoder_blocks.readOp.dynamic * 1e9 << endl;
cout << "\tWordline (nJ): " <<
fr->tag_array2->power_row_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitline mux & associated drivers (nJ): " <<
fr->tag_array2->power_bit_mux_predecoder_drivers.readOp.dynamic * 1e9 +
fr->tag_array2->power_bit_mux_predecoder_blocks.readOp.dynamic * 1e9 +
fr->tag_array2->power_bit_mux_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tSense amp mux & associated drivers (nJ): " <<
fr->tag_array2->power_senseamp_mux_lev_1_predecoder_drivers.readOp.dynamic * 1e9 +
fr->tag_array2->power_senseamp_mux_lev_1_predecoder_blocks.readOp.dynamic * 1e9 +
fr->tag_array2->power_senseamp_mux_lev_1_decoders.readOp.dynamic * 1e9 +
fr->tag_array2->power_senseamp_mux_lev_2_predecoder_drivers.readOp.dynamic * 1e9 +
fr->tag_array2->power_senseamp_mux_lev_2_predecoder_blocks.readOp.dynamic * 1e9 +
fr->tag_array2->power_senseamp_mux_lev_2_decoders.readOp.dynamic * 1e9 << endl;
cout << "\tBitlines precharge and equalization circuit (nJ): " <<
fr->tag_array2->power_prechg_eq_drivers.readOp.dynamic * 1e9 << endl;
cout << "\tBitlines (nJ): " <<
fr->tag_array2->power_bitlines.readOp.dynamic * 1e9 << endl;
cout << "\tSense amplifier energy (nJ): " <<
fr->tag_array2->power_sense_amps.readOp.dynamic * 1e9 << endl;
cout << "\tSub-array output driver (nJ): " <<
fr->tag_array2->power_output_drivers_at_subarray.readOp.dynamic * 1e9 << endl;
}
cout << endl << endl << "Area Components:" << endl << endl;
/* Data array area stats */
if (!(g_ip->pure_cam || g_ip->fully_assoc))
cout << " Data array: Area (mm2): " << fr->data_array2->area * 1e-6 << endl;
else if (g_ip->pure_cam)
cout << " CAM array: Area (mm2): " << fr->data_array2->area * 1e-6 << endl;
else
cout << " Fully associative cache array: Area (mm2): " << fr->data_array2->area * 1e-6 << endl;
cout << "\tHeight (mm): " <<
fr->data_array2->all_banks_height*1e-3 << endl;
cout << "\tWidth (mm): " <<
fr->data_array2->all_banks_width*1e-3 << endl;
if (g_ip->print_detail) {
cout << "\tArea efficiency (Memory cell area/Total area) - " <<
fr->data_array2->area_efficiency << " %" << endl;
cout << "\t\tMAT Height (mm): " <<
fr->data_array2->mat_height*1e-3 << endl;
cout << "\t\tMAT Length (mm): " <<
fr->data_array2->mat_length*1e-3 << endl;
cout << "\t\tSubarray Height (mm): " <<
fr->data_array2->subarray_height*1e-3 << endl;
cout << "\t\tSubarray Length (mm): " <<
fr->data_array2->subarray_length*1e-3 << endl;
}
/* Tag array area stats */
if ((!(g_ip->pure_ram|| g_ip->pure_cam || g_ip->fully_assoc)) && !g_ip->is_main_mem)
{
cout << endl << " Tag array: Area (mm2): " << fr->tag_array2->area * 1e-6 << endl;
cout << "\tHeight (mm): " <<
fr->tag_array2->all_banks_height*1e-3 << endl;
cout << "\tWidth (mm): " <<
fr->tag_array2->all_banks_width*1e-3 << endl;
if (g_ip->print_detail)
{
cout << "\tArea efficiency (Memory cell area/Total area) - " <<
fr->tag_array2->area_efficiency << " %" << endl;
cout << "\t\tMAT Height (mm): " <<
fr->tag_array2->mat_height*1e-3 << endl;
cout << "\t\tMAT Length (mm): " <<
fr->tag_array2->mat_length*1e-3 << endl;
cout << "\t\tSubarray Height (mm): " <<
fr->tag_array2->subarray_height*1e-3 << endl;
cout << "\t\tSubarray Length (mm): " <<
fr->tag_array2->subarray_length*1e-3 << endl;
}
}
Wire wpr;
wpr.print_wire();
//cout << "FO4 = " << g_tp.FO4 << endl;
}
}
//McPAT's plain interface, please keep !!!
uca_org_t cacti_interface(InputParameter * const local_interface)
{
// g_ip = new InputParameter();
//g_ip->add_ecc_b_ = true;
uca_org_t fin_res;
fin_res.valid = false;
g_ip = local_interface;
// g_ip->data_arr_ram_cell_tech_type = data_arr_ram_cell_tech_flavor_in;
// g_ip->data_arr_peri_global_tech_type = data_arr_peri_global_tech_flavor_in;
// g_ip->tag_arr_ram_cell_tech_type = tag_arr_ram_cell_tech_flavor_in;
// g_ip->tag_arr_peri_global_tech_type = tag_arr_peri_global_tech_flavor_in;
//
// g_ip->ic_proj_type = interconnect_projection_type_in;
// g_ip->wire_is_mat_type = wire_inside_mat_type_in;
// g_ip->wire_os_mat_type = wire_outside_mat_type_in;
// g_ip->burst_len = BURST_LENGTH_in;
// g_ip->int_prefetch_w = INTERNAL_PREFETCH_WIDTH_in;
// g_ip->page_sz_bits = PAGE_SIZE_BITS_in;
//
// g_ip->cache_sz = cache_size;
// g_ip->line_sz = line_size;
// g_ip->assoc = associativity;
// g_ip->nbanks = banks;
// g_ip->out_w = output_width;
// g_ip->specific_tag = specific_tag;
// if (tag_width == 0) {
// g_ip->tag_w = 42;
// }
// else {
// g_ip->tag_w = tag_width;
// }
//
// g_ip->access_mode = access_mode;
// g_ip->delay_wt = obj_func_delay;
// g_ip->dynamic_power_wt = obj_func_dynamic_power;
// g_ip->leakage_power_wt = obj_func_leakage_power;
// g_ip->area_wt = obj_func_area;
// g_ip->cycle_time_wt = obj_func_cycle_time;
// g_ip->delay_dev = dev_func_delay;
// g_ip->dynamic_power_dev = dev_func_dynamic_power;
// g_ip->leakage_power_dev = dev_func_leakage_power;
// g_ip->area_dev = dev_func_area;
// g_ip->cycle_time_dev = dev_func_cycle_time;
// g_ip->temp = temp;
//
// g_ip->F_sz_nm = tech_node;
// g_ip->F_sz_um = tech_node / 1000;
// g_ip->is_main_mem = (main_mem != 0) ? true : false;
// g_ip->is_cache = (cache ==1) ? true : false;
// g_ip->pure_ram = (cache ==0) ? true : false;
// g_ip->pure_cam = (cache ==2) ? true : false;
// g_ip->rpters_in_htree = (REPEATERS_IN_HTREE_SEGMENTS_in != 0) ? true : false;
// g_ip->ver_htree_wires_over_array = VERTICAL_HTREE_WIRES_OVER_THE_ARRAY_in;
// g_ip->broadcast_addr_din_over_ver_htrees = BROADCAST_ADDR_DATAIN_OVER_VERTICAL_HTREES_in;
//
// g_ip->num_rw_ports = rw_ports;
// g_ip->num_rd_ports = excl_read_ports;
// g_ip->num_wr_ports = excl_write_ports;
// g_ip->num_se_rd_ports = single_ended_read_ports;
// g_ip->num_search_ports = search_ports;
//
// g_ip->print_detail = 1;
// g_ip->nuca = 0;
// g_ip->is_cache=true;
//
// if (force_wiretype == 0)
// {
// g_ip->wt = Global;
// g_ip->force_wiretype = false;
// }
// else
// { g_ip->force_wiretype = true;
// if (wiretype==10) {
// g_ip->wt = Global_10;
// }
// if (wiretype==20) {
// g_ip->wt = Global_20;
// }
// if (wiretype==30) {
// g_ip->wt = Global_30;
// }
// if (wiretype==5) {
// g_ip->wt = Global_5;
// }
// if (wiretype==0) {
// g_ip->wt = Low_swing;
// }
// }
// //g_ip->wt = Global_5;
// if (force_config == 0)
// {
// g_ip->force_cache_config = false;
// }
// else
// {
// g_ip->force_cache_config = true;
// g_ip->ndbl=ndbl;
// g_ip->ndwl=ndwl;
// g_ip->nspd=nspd;
// g_ip->ndcm=ndcm;
// g_ip->ndsam1=ndsam1;
// g_ip->ndsam2=ndsam2;
//
//
// }
//
// if (ecc==0){
// g_ip->add_ecc_b_=false;
// }
// else
// {
// g_ip->add_ecc_b_=true;
// }
g_ip->error_checking();
init_tech_params(g_ip->F_sz_um, false);
Wire winit; // Do not delete this line. It initializes wires.
solve(&fin_res);
// g_ip->display_ip();
// output_UCA(&fin_res);
// output_data_csv(fin_res);
// delete (g_ip);
return fin_res;
}
//McPAT's plain interface, please keep !!!
uca_org_t init_interface(InputParameter* const local_interface)
{
// g_ip = new InputParameter();
//g_ip->add_ecc_b_ = true;
uca_org_t fin_res;
fin_res.valid = false;
g_ip = local_interface;
// g_ip->data_arr_ram_cell_tech_type = data_arr_ram_cell_tech_flavor_in;
// g_ip->data_arr_peri_global_tech_type = data_arr_peri_global_tech_flavor_in;
// g_ip->tag_arr_ram_cell_tech_type = tag_arr_ram_cell_tech_flavor_in;
// g_ip->tag_arr_peri_global_tech_type = tag_arr_peri_global_tech_flavor_in;
//
// g_ip->ic_proj_type = interconnect_projection_type_in;
// g_ip->wire_is_mat_type = wire_inside_mat_type_in;
// g_ip->wire_os_mat_type = wire_outside_mat_type_in;
// g_ip->burst_len = BURST_LENGTH_in;
// g_ip->int_prefetch_w = INTERNAL_PREFETCH_WIDTH_in;
// g_ip->page_sz_bits = PAGE_SIZE_BITS_in;
//
// g_ip->cache_sz = cache_size;
// g_ip->line_sz = line_size;
// g_ip->assoc = associativity;
// g_ip->nbanks = banks;
// g_ip->out_w = output_width;
// g_ip->specific_tag = specific_tag;
// if (tag_width == 0) {
// g_ip->tag_w = 42;
// }
// else {
// g_ip->tag_w = tag_width;
// }
//
// g_ip->access_mode = access_mode;
// g_ip->delay_wt = obj_func_delay;
// g_ip->dynamic_power_wt = obj_func_dynamic_power;
// g_ip->leakage_power_wt = obj_func_leakage_power;
// g_ip->area_wt = obj_func_area;
// g_ip->cycle_time_wt = obj_func_cycle_time;
// g_ip->delay_dev = dev_func_delay;
// g_ip->dynamic_power_dev = dev_func_dynamic_power;
// g_ip->leakage_power_dev = dev_func_leakage_power;
// g_ip->area_dev = dev_func_area;
// g_ip->cycle_time_dev = dev_func_cycle_time;
// g_ip->temp = temp;
//
// g_ip->F_sz_nm = tech_node;
// g_ip->F_sz_um = tech_node / 1000;
// g_ip->is_main_mem = (main_mem != 0) ? true : false;
// g_ip->is_cache = (cache ==1) ? true : false;
// g_ip->pure_ram = (cache ==0) ? true : false;
// g_ip->pure_cam = (cache ==2) ? true : false;
// g_ip->rpters_in_htree = (REPEATERS_IN_HTREE_SEGMENTS_in != 0) ? true : false;
// g_ip->ver_htree_wires_over_array = VERTICAL_HTREE_WIRES_OVER_THE_ARRAY_in;
// g_ip->broadcast_addr_din_over_ver_htrees = BROADCAST_ADDR_DATAIN_OVER_VERTICAL_HTREES_in;
//
// g_ip->num_rw_ports = rw_ports;
// g_ip->num_rd_ports = excl_read_ports;
// g_ip->num_wr_ports = excl_write_ports;
// g_ip->num_se_rd_ports = single_ended_read_ports;
// g_ip->num_search_ports = search_ports;
//
// g_ip->print_detail = 1;
// g_ip->nuca = 0;
//
// if (force_wiretype == 0)
// {
// g_ip->wt = Global;
// g_ip->force_wiretype = false;
// }
// else
// { g_ip->force_wiretype = true;
// if (wiretype==10) {
// g_ip->wt = Global_10;
// }
// if (wiretype==20) {
// g_ip->wt = Global_20;
// }
// if (wiretype==30) {
// g_ip->wt = Global_30;
// }
// if (wiretype==5) {
// g_ip->wt = Global_5;
// }
// if (wiretype==0) {
// g_ip->wt = Low_swing;
// }
// }
// //g_ip->wt = Global_5;
// if (force_config == 0)
// {
// g_ip->force_cache_config = false;
// }
// else
// {
// g_ip->force_cache_config = true;
// g_ip->ndbl=ndbl;
// g_ip->ndwl=ndwl;
// g_ip->nspd=nspd;
// g_ip->ndcm=ndcm;
// g_ip->ndsam1=ndsam1;
// g_ip->ndsam2=ndsam2;
//
//
// }
//
// if (ecc==0){
// g_ip->add_ecc_b_=false;
// }
// else
// {
// g_ip->add_ecc_b_=true;
// }
g_ip->error_checking();
init_tech_params(g_ip->F_sz_um, false);
Wire winit; // Do not delete this line. It initializes wires.
//solve(&fin_res);
//g_ip->display_ip();
//solve(&fin_res);
//output_UCA(&fin_res);
//output_data_csv(fin_res);
// delete (g_ip);
return fin_res;
}
void reconfigure(InputParameter *local_interface, uca_org_t *fin_res)
{
// Copy the InputParameter to global interface (g_ip) and do error checking.
g_ip = local_interface;
g_ip->error_checking();
// Initialize technology parameters
init_tech_params(g_ip->F_sz_um,false);
Wire winit; // Do not delete this line. It initializes wires.
// This corresponds to solve() in the initialization process.
update(fin_res);
}