sanchayanmaity/gem5
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
gem5/src/sim/clocked_object.hh

200 lines
6.2 KiB
C++
Raw Normal View History

Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
/*
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
* Copyright (c) 2012-2013 ARM Limited
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
* All rights reserved
*
* The license below extends only to copyright in the software and shall
* not be construed as granting a license to any other intellectual
* property including but not limited to intellectual property relating
* to a hardware implementation of the functionality of the software
* licensed hereunder. You may use the software subject to the license
* terms below provided that you ensure that this notice is replicated
* unmodified and in its entirety in all distributions of the software,
* modified or unmodified, in source code or in binary form.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met: redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer;
* redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution;
* neither the name of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Authors: Andreas Hansson
*/
/**
* @file
* ClockedObject declaration and implementation.
*/
#ifndef __SIM_CLOCKED_OBJECT_HH__
#define __SIM_CLOCKED_OBJECT_HH__
#include "base/intmath.hh"
sim: Fatal if a clocked object is set to have a clock of 0 This patch adds a check to the clocked object constructor to ensure it is not configured to have a clock period of 0.
2013-01-07 19:05:39 +01:00
#include "base/misc.hh"
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
#include "params/ClockedObject.hh"
sim: have a curTick per eventq This patch adds a _curTick variable to an eventq. This variable is updated whenever an event is serviced in function serviceOne(), or all events upto a particular time are processed in function serviceEvents(). This change helps when there are eventqs that do not make use of curTick for scheduling events.
2012-11-16 17:27:47 +01:00
#include "sim/core.hh"
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
#include "sim/clock_domain.hh"
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
#include "sim/sim_object.hh"
/**
* The ClockedObject class extends the SimObject with a clock and
* accessor functions to relate ticks to the cycles of the object.
*/
class ClockedObject : public SimObject
{
private:
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
// the tick value of the next clock edge (>= curTick()) at the
// time of the last call to update()
mutable Tick tick;
// The cycle counter value corresponding to the current value of
// 'tick'
Clock: Add a Cycles wrapper class and use where applicable This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28 20:30:33 +02:00
mutable Cycles cycle;
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
/**
* Prevent inadvertent use of the copy constructor and assignment
* operator by making them private.
*/
ClockedObject(ClockedObject&);
ClockedObject& operator=(ClockedObject&);
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
/**
* Align cycle and tick to the next clock edge if not already done.
*/
void update() const
{
// both tick and cycle are up-to-date and we are done, note
// that the >= is important as it captures cases where tick
// has already passed curTick()
if (tick >= curTick())
return;
// optimise for the common case and see if the tick should be
// advanced by a single clock period
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
tick += clockPeriod();
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
++cycle;
// see if we are done at this point
if (tick >= curTick())
return;
// if not, we have to recalculate the cycle and tick, we
// perform the calculations in terms of relative cycles to
// allow changes to the clock period in the future
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
Cycles elapsedCycles(divCeil(curTick() - tick, clockPeriod()));
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
cycle += elapsedCycles;
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
tick += elapsedCycles * clockPeriod();
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
}
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
/**
* The clock domain this clocked object belongs to
*/
ClockDomain &clockDomain;
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
sim: Make clock private and access using clockPeriod() This patch makes the clock member private to the ClockedObject and forces all children to access it using clockPeriod(). This makes it impossible to inadvertently change the clock, and also makes it easier to transition to a situation where the clock is derived from e.g. a clock domain, or through a multiplier.
2013-02-19 11:56:06 +01:00
protected:
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
/**
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
* Create a clocked object and set the clock domain based on the
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
* parameters.
*/
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
ClockedObject(const ClockedObjectParams* p) :
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
SimObject(p), tick(0), cycle(0), clockDomain(*p->clk_domain)
sim: Fatal if a clocked object is set to have a clock of 0 This patch adds a check to the clocked object constructor to ensure it is not configured to have a clock period of 0.
2013-01-07 19:05:39 +01:00
{
}
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
/**
* Virtual destructor due to inheritance.
*/
virtual ~ClockedObject() { }
ruby: reset timing after cache warm up Ruby system was recently converted to a clocked object. Such objects maintain state related to the time that has passed so far. During the cache warmup, Ruby system changes its own time and the global time. Later on, the global time is restored. So Ruby system also needs to reset its own time.
2012-10-16 00:27:15 +02:00
/**
* Reset the object's clock using the current global tick value. Likely
* to be used only when the global clock is reset. Currently, this done
* only when Ruby is done warming up the memory system.
*/
void resetClock() const
{
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
Cycles elapsedCycles(divCeil(curTick(), clockPeriod()));
ruby: reset timing after cache warm up Ruby system was recently converted to a clocked object. Such objects maintain state related to the time that has passed so far. During the cache warmup, Ruby system changes its own time and the global time. Later on, the global time is restored. So Ruby system also needs to reset its own time.
2012-10-16 00:27:15 +02:00
cycle = elapsedCycles;
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
tick = elapsedCycles * clockPeriod();
ruby: reset timing after cache warm up Ruby system was recently converted to a clocked object. Such objects maintain state related to the time that has passed so far. During the cache warmup, Ruby system changes its own time and the global time. Later on, the global time is restored. So Ruby system also needs to reset its own time.
2012-10-16 00:27:15 +02:00
}
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
public:
/**
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
* Determine the tick when a cycle begins, by default the current
* one, but the argument also enables the caller to determine a
* future cycle.
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
*
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
* @param cycles The number of cycles into the future
*
* @return The tick when the clock edge occurs
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
*/
Clock: Add a Cycles wrapper class and use where applicable This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28 20:30:33 +02:00
inline Tick clockEdge(Cycles cycles = Cycles(0)) const
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
{
// align tick to the next clock edge
update();
// figure out when this future cycle is
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
return tick + clockPeriod() * cycles;
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
}
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
/**
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
* Determine the current cycle, corresponding to a tick aligned to
* a clock edge.
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
*
Clock: Add a Cycles wrapper class and use where applicable This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28 20:30:33 +02:00
* @return The current cycle count
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
*/
Clock: Add a Cycles wrapper class and use where applicable This patch addresses the comments and feedback on the preceding patch that reworks the clocks and now more clearly shows where cycles (relative cycle counts) are used to express time. Instead of bumping the existing patch I chose to make this a separate patch, merely to try and focus the discussion around a smaller set of changes. The two patches will be pushed together though. This changes done as part of this patch are mostly following directly from the introduction of the wrapper class, and change enough code to make things compile and run again. There are definitely more places where int/uint/Tick is still used to represent cycles, and it will take some time to chase them all down. Similarly, a lot of parameters should be changed from Param.Tick and Param.Unsigned to Param.Cycles. In addition, the use of curTick is questionable as there should not be an absolute cycle. Potential solutions can be built on top of this patch. There is a similar situation in the o3 CPU where lastRunningCycle is currently counting in Cycles, and is still an absolute time. More discussion to be had in other words. An additional change that would be appropriate in the future is to perform a similar wrapping of Tick and probably also introduce a Ticks class along with suitable operators for all these classes.
2012-08-28 20:30:33 +02:00
inline Cycles curCycle() const
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
{
// align cycle to the next clock edge.
update();
return cycle;
}
/**
sim: separate nextCycle() and clockEdge() in clockedObjects Previously, nextCycle() could return the *current* cycle if the current tick was already aligned with the clock edge. This behavior is not only confusing (not quite what the function name implies), but also caused problems in the drainResume() function. When exiting/re-entering the sim loop (e.g., to take checkpoints), the CPUs will drain and resume. Due to the previous behavior of nextCycle(), the CPU tick events were being rescheduled in the same ticks that were already processed before draining. This caused divergence from runs that did not exit/re-entered the sim loop. (Initially a cycle difference, but a significant impact later on.) This patch separates out the two behaviors (nextCycle() and clockEdge()), uses nextCycle() in drainResume, and uses clockEdge() everywhere else. Nothing (other than name) should change except for the drainResume timing.
2013-04-22 19:20:31 +02:00
* Based on the clock of the object, determine the tick when the next
* cycle begins, in other words, return the next clock edge.
* (This can never be the current tick.)
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
*
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
* @return The tick when the next cycle starts
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
*/
Clock: Rework clocks to avoid tick-to-cycle transformations This patch introduces the notion of a clock update function that aims to avoid costly divisions when turning the current tick into a cycle. Each clocked object advances a private (hidden) cycle member and a tick member and uses these to implement functions for getting the tick of the next cycle, or the tick of a cycle some time in the future. In the different modules using the clocks, changes are made to avoid counting in ticks only to later translate to cycles. There are a few oddities in how the O3 and inorder CPU count idle cycles, as seen by a few locations where a cycle is subtracted in the calculation. This is done such that the regression does not change any stats, but should be revisited in a future patch. Another, much needed, change that is not done as part of this patch is to introduce a new typedef uint64_t Cycle to be able to at least hint at the unit of the variables counting Ticks vs Cycles. This will be done as a follow-up patch. As an additional follow up, the thread context still uses ticks for the book keeping of last activate and last suspend and this should probably also be changed into cycles as well.
2012-08-28 20:30:31 +02:00
Tick nextCycle() const
sim: separate nextCycle() and clockEdge() in clockedObjects Previously, nextCycle() could return the *current* cycle if the current tick was already aligned with the clock edge. This behavior is not only confusing (not quite what the function name implies), but also caused problems in the drainResume() function. When exiting/re-entering the sim loop (e.g., to take checkpoints), the CPUs will drain and resume. Due to the previous behavior of nextCycle(), the CPU tick events were being rescheduled in the same ticks that were already processed before draining. This caused divergence from runs that did not exit/re-entered the sim loop. (Initially a cycle difference, but a significant impact later on.) This patch separates out the two behaviors (nextCycle() and clockEdge()), uses nextCycle() in drainResume, and uses clockEdge() everywhere else. Nothing (other than name) should change except for the drainResume timing.
2013-04-22 19:20:31 +02:00
{ return clockEdge(Cycles(1)); }
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
inline uint64_t frequency() const
{
return SimClock::Frequency / clockPeriod();
}
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
inline Tick clockPeriod() const
{
return clockDomain.clockPeriod();
}
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
scons: Fix up numerous warnings about name shadowing This patch address the most important name shadowing warnings (as produced when using gcc/clang with -Wshadow). There are many locations where constructor parameters and function parameters shadow local variables, but these are left unchanged.
2013-02-19 11:56:06 +01:00
inline Cycles ticksToCycles(Tick t) const
sim: Add the notion of clock domains to all ClockedObjects This patch adds the notion of source- and derived-clock domains to the ClockedObjects. As such, all clock information is moved to the clock domain, and the ClockedObjects are grouped into domains. The clock domains are either source domains, with a specific clock period, or derived domains that have a parent domain and a divider (potentially chained). For piece of logic that runs at a derived clock (a ratio of the clock its parent is running at) the necessary derived clock domain is created from its corresponding parent clock domain. For now, the derived clock domain only supports a divider, thus ensuring a lower speed compared to its parent. Multiplier functionality implies a PLL logic that has not been modelled yet (create a separate clock instead). The clock domains should be used as a mechanism to provide a controllable clock source that affects clock for every clocked object lying beneath it. The clock of the domain can (in a future patch) be controlled by a handler responsible for dynamic frequency scaling of the respective clock domains. All the config scripts have been retro-fitted with clock domains. For the System a default SrcClockDomain is created. For CPUs that run at a different speed than the system, there is a seperate clock domain created. This domain incorporates the CPU and the associated caches. As before, Ruby runs under its own clock domain. The clock period of all domains are pre-computed, such that no virtual functions or multiplications are needed when calling clockPeriod. Instead, the clock period is pre-computed when any changes occur. For this to be possible, each clock domain tracks its children.
2013-06-27 11:49:49 +02:00
{ return Cycles(t / clockPeriod()); }
Clock: Move the clock and related functions to ClockedObject This patch moves the clock of the CPU, bus, and numerous devices to the new class ClockedObject, that sits in between the SimObject and MemObject in the class hierarchy. Although there are currently a fair amount of MemObjects that do not make use of the clock, they potentially should do so, e.g. the caches should at some point have the same clock as the CPU, potentially with a 1:n ratio. This patch does not introduce any new clock objects or object hierarchies (clusters, clock domains etc), but is still a step in the direction of having a more structured approach clock domains. The most contentious part of this patch is the serialisation of clocks that some of the modules (but not all) did previously. This serialisation should not be needed as the clock is set through the parameters even when restoring from the checkpoint. In other words, the state is "stored" in the Python code that creates the modules. The nextCycle methods are also simplified and the clock phase parameter of the CPU is removed (this could be part of a clock object once they are introduced).
2012-08-21 11:49:01 +02:00
};
#endif //__SIM_CLOCKED_OBJECT_HH__
Reference in a new issue Copy permalink